Gecko [ nrupathungauniversityblr.ac.in ]

/ usr / bin / [ HOME SHELL ]

Name	Size	Permission
X11	[ DIR ]	drwxr-xr-x
2to3-2.7	96 B	-rwxr-xr-x
NF	963 B	-rwxr-xr-x
VGAuthService	126.22 KB	-rwxr-xr-x
[	50.18 KB	-rwxr-xr-x
a2ping	99.98 KB	-rwxr-xr-x
a5toa4	1.07 KB	-rwxr-xr-x
aa-enabled	22.16 KB	-rwxr-xr-x
aa-exec	22.16 KB	-rwxr-xr-x
ab	54.18 KB	-rwxr-xr-x
aclocal	35.93 KB	-rwxr-xr-x
aclocal-1.15	35.93 KB	-rwxr-xr-x
acpi_listen	14.27 KB	-rwxr-xr-x
acyclic	10 KB	-rwxr-xr-x
add-apt-repository	7.24 KB	-rwxr-xr-x
addpart	22.08 KB	-rwxr-xr-x
addr2line	30.55 KB	-rwxr-xr-x
adhocfilelist	8.41 KB	-rwxr-xr-x
afm2afm	12.7 KB	-rwxr-xr-x
afm2pl	34.34 KB	-rwxr-xr-x
afm2tfm	48.73 KB	-rwxr-xr-x
aleph	527.5 KB	-rwxr-xr-x
allcm	3.4 KB	-rwxr-xr-x
allec	3.4 KB	-rwxr-xr-x
allneeded	903 B	-rwxr-xr-x
apport-bug	2.5 KB	-rwxr-xr-x
apport-cli	13.05 KB	-rwxr-xr-x
apport-collect	2.5 KB	-rwxr-xr-x
apport-unpack	1.81 KB	-rwxr-xr-x
apropos	46.98 KB	-rwxr-xr-x
apt	14.09 KB	-rwxr-xr-x
apt-add-repository	7.24 KB	-rwxr-xr-x
apt-cache	78.16 KB	-rwxr-xr-x
apt-cdrom	22.16 KB	-rwxr-xr-x
apt-config	22.09 KB	-rwxr-xr-x
apt-extracttemplates	22.16 KB	-rwxr-xr-x
apt-ftparchive	234.16 KB	-rwxr-xr-x
apt-get	42.16 KB	-rwxr-xr-x
apt-key	26.75 KB	-rwxr-xr-x
apt-mark	42.16 KB	-rwxr-xr-x
apt-sortpkgs	42.09 KB	-rwxr-xr-x
ar	58.24 KB	-rwxr-xr-x
arara	108 B	-rwxr-xr-x
arch	34.21 KB	-rwxr-xr-x
arlatex	9.74 KB	-rwxr-xr-x
as	895.98 KB	-rwxr-xr-x
at	50.26 KB	-rwsr-sr-x
atq	50.26 KB	-rwsr-sr-x
atrm	50.26 KB	-rwsr-sr-x
authorindex	19.98 KB	-rwxr-xr-x
autoconf	14.42 KB	-rwxr-xr-x
autoheader	8.34 KB	-rwxr-xr-x
autoinst	80.49 KB	-rwxr-xr-x
autom4te	31.91 KB	-rwxr-xr-x
automake	247.38 KB	-rwxr-xr-x
automake-1.15	247.38 KB	-rwxr-xr-x
automat-visualize3	402 B	-rwxr-xr-x
autopoint	25.97 KB	-rwxr-xr-x
autoreconf	20.67 KB	-rwxr-xr-x
autoscan	16.73 KB	-rwxr-xr-x
autosp	38.13 KB	-rwxr-xr-x
autoupdate	33.08 KB	-rwxr-xr-x
awk	642.65 KB	-rwxr-xr-x
aws	815 B	-rwxr-xr-x
aws_completer	1.11 KB	-rwxr-xr-x
b2sum	54.21 KB	-rwxr-xr-x
base32	38.18 KB	-rwxr-xr-x
base64	38.18 KB	-rwxr-xr-x
basename	34.18 KB	-rwxr-xr-x
bashbug	6.95 KB	-rwxr-xr-x
batch	152 B	-rwxr-xr-x
bc	90.7 KB	-rwxr-xr-x
bcomps	14.04 KB	-rwxr-xr-x
bibtex	118.08 KB	-rwxr-xr-x
bibtex.original	118.08 KB	-rwxr-xr-x
bibtex8	142.63 KB	-rwxr-xr-x
bibtexu	146.6 KB	-rwxr-xr-x
bootctl	34.13 KB	-rwxr-xr-x
browse	24.65 KB	-rwxr-xr-x
bsd-from	9.99 KB	-rwxr-xr-x
bsd-write	13.99 KB	-rwxr-sr-x
bundledoc	28.58 KB	-rwxr-xr-x
busctl	66.09 KB	-rwxr-xr-x
byobu	8.07 KB	-rwxr-xr-x
byobu-config	996 B	-rwxr-xr-x
byobu-ctrl-a	4.66 KB	-rwxr-xr-x
byobu-disable	1.26 KB	-rwxr-xr-x
byobu-disable-prompt	1.28 KB	-rwxr-xr-x
byobu-enable	1.15 KB	-rwxr-xr-x
byobu-enable-prompt	1.42 KB	-rwxr-xr-x
byobu-export	1.23 KB	-rwxr-xr-x
byobu-janitor	5.82 KB	-rwxr-xr-x
byobu-keybindings	1.47 KB	-rwxr-xr-x
byobu-launch	3.21 KB	-rwxr-xr-x
byobu-launcher	1.87 KB	-rwxr-xr-x
byobu-launcher-install	2.4 KB	-rwxr-xr-x
byobu-launcher-uninstall	1.52 KB	-rwxr-xr-x
byobu-layout	3.27 KB	-rwxr-xr-x
byobu-prompt	1.13 KB	-rwxr-xr-x
byobu-quiet	1.38 KB	-rwxr-xr-x
byobu-reconnect-sockets	3.22 KB	-rwxr-xr-x
byobu-screen	8.07 KB	-rwxr-xr-x
byobu-select-backend	1.42 KB	-rwxr-xr-x
byobu-select-profile	6.14 KB	-rwxr-xr-x
byobu-select-session	1012 B	-rwxr-xr-x
byobu-shell	1.56 KB	-rwxr-xr-x
byobu-silent	1.28 KB	-rwxr-xr-x
byobu-status	5.87 KB	-rwxr-xr-x
byobu-status-detail	1.18 KB	-rwxr-xr-x
byobu-tmux	8.07 KB	-rwxr-xr-x
byobu-ugraph	4.56 KB	-rwxr-xr-x
byobu-ulevel	11.71 KB	-rwxr-xr-x
c++	1022.94 KB	-rwxr-xr-x
c++filt	26.12 KB	-rwxr-xr-x
c89	428 B	-rwxr-xr-x
c89-gcc	428 B	-rwxr-xr-x
c99	454 B	-rwxr-xr-x
c99-gcc	454 B	-rwxr-xr-x
c_rehash	6.65 KB	-rwxr-xr-x
cachepic	7.79 KB	-rwxr-xr-x
cal	28.79 KB	-rwxr-xr-x
calendar	30.48 KB	-rwxr-xr-x
captoinfo	82.11 KB	-rwxr-xr-x
catchsegv	3.25 KB	-rwxr-xr-x
catman	38.46 KB	-rwxr-xr-x
cautious-launcher	853 B	-rwxr-xr-x
cc	1022.94 KB	-rwxr-xr-x
ccomps	22.04 KB	-rwxr-xr-x
certbot	385 B	-rwxr-xr-x
cftp3	380 B	-rwxr-xr-x
chacl	13.99 KB	-rwxr-xr-x
chage	70.13 KB	-rwxr-sr-x
chardet3	389 B	-rwxr-xr-x
chardetect3	389 B	-rwxr-xr-x
chattr	14 KB	-rwxr-xr-x
chcon	62.18 KB	-rwxr-xr-x
check-language-support	2.71 KB	-rwxr-xr-x
checkgid	5.99 KB	-rwxr-xr-x
checklistings	10.94 KB	-rwxr-xr-x
chfn	74.7 KB	-rwsr-xr-x
chrpath	18.26 KB	-rwxr-xr-x
chrt	30.08 KB	-rwxr-xr-x
chsh	43.48 KB	-rwsr-xr-x
circo	9.99 KB	-rwxr-xr-x
ckbcomp	146.33 KB	-rwxr-xr-x
ckeygen3	386 B	-rwxr-xr-x
cksum	34.18 KB	-rwxr-xr-x
clear	10 KB	-rwxr-xr-x
clear_console	10.07 KB	-rwxr-xr-x
cloud-id	396 B	-rwxr-xr-x
cloud-init	400 B	-rwxr-xr-x
cloud-init-per	2.06 KB	-rwxr-xr-x
cluster	555.3 KB	-rwxr-xr-x
cmp	46.09 KB	-rwxr-xr-x
codepage	13.99 KB	-rwxr-xr-x
col	9.99 KB	-rwxr-xr-x
col1	963 B	-rwxr-xr-x
col2	963 B	-rwxr-xr-x
col3	963 B	-rwxr-xr-x
col4	963 B	-rwxr-xr-x
col5	963 B	-rwxr-xr-x
col6	963 B	-rwxr-xr-x
col7	963 B	-rwxr-xr-x
col8	963 B	-rwxr-xr-x
col9	963 B	-rwxr-xr-x
colcrt	10 KB	-rwxr-xr-x
colrm	9.99 KB	-rwxr-xr-x
column	14.01 KB	-rwxr-xr-x
combinediff	46.58 KB	-rwxr-xr-x
comm	38.21 KB	-rwxr-xr-x
compose	17.74 KB	-rwxr-xr-x
composer	1.54 KB	-rwxr-xr-x
conch3	382 B	-rwxr-xr-x
corelist	12.53 KB	-rwxr-xr-x
cpan	7.96 KB	-rwxr-xr-x
cpan5.26-x86_64-linux-gnu	7.99 KB	-rwxr-xr-x
cpp	1022.94 KB	-rwxr-xr-x
cpp-7	1022.94 KB	-rwxr-xr-x
crc32	1.04 KB	-rwxr-xr-x
crontab	38.43 KB	-rwxr-sr-x
csplit	50.21 KB	-rwxr-xr-x
ctail	958 B	-rwxr-xr-x
ctan-o-mat	19.22 KB	-rwxr-xr-x
ctangle	46.38 KB	-rwxr-xr-x
ctanify	23.76 KB	-rwxr-xr-x
ctanupload	16.4 KB	-rwxr-xr-x
ctie	18.09 KB	-rwxr-xr-x
ctstat	22.35 KB	-rwxr-xr-x
curl	218.07 KB	-rwxr-xr-x
curl-config	5.94 KB	-rwxr-xr-x
cut	42.21 KB	-rwxr-xr-x
cweave	82.41 KB	-rwxr-xr-x
dbus-cleanup-sockets	9.98 KB	-rwxr-xr-x
dbus-daemon	231.04 KB	-rwxr-xr-x
dbus-monitor	21.99 KB	-rwxr-xr-x
dbus-run-session	9.98 KB	-rwxr-xr-x
dbus-send	25.98 KB	-rwxr-xr-x
dbus-update-activation-environ...	13.98 KB	-rwxr-xr-x
dbus-uuidgen	9.98 KB	-rwxr-xr-x
de-macro	33.35 KB	-rwxr-xr-x
deallocvt	10.07 KB	-rwxr-xr-x
deb-systemd-helper	19.67 KB	-rwxr-xr-x
deb-systemd-invoke	4.33 KB	-rwxr-xr-x
debconf	2.79 KB	-rwxr-xr-x
debconf-apt-progress	11.27 KB	-rwxr-xr-x
debconf-communicate	608 B	-rwxr-xr-x
debconf-copydb	1.68 KB	-rwxr-xr-x
debconf-escape	647 B	-rwxr-xr-x
debconf-gettextize	15.97 KB	-rwxr-xr-x
debconf-set-selections	2.87 KB	-rwxr-xr-x
debconf-show	1.78 KB	-rwxr-xr-x
debconf-updatepo	4.46 KB	-rwxr-xr-x
dehtmldiff	1.32 KB	-rwxr-xr-x
delpart	22.08 KB	-rwxr-xr-x
delv	40.86 KB	-rwxr-xr-x
depythontex	801 B	-rwxr-xr-x
depythontex3	275 B	-rwxr-xr-x
derb	22.57 KB	-rwxr-xr-x
detex	54 KB	-rwxr-xr-x
devnag	44.15 KB	-rwxr-xr-x
dh	28.43 KB	-rwxr-xr-x
dh-exec	14.27 KB	-rwxr-xr-x
dh_auto_build	1.35 KB	-rwxr-xr-x
dh_auto_clean	1.49 KB	-rwxr-xr-x
dh_auto_configure	1.6 KB	-rwxr-xr-x
dh_auto_install	2.77 KB	-rwxr-xr-x
dh_auto_test	1.63 KB	-rwxr-xr-x
dh_autoreconf	5.94 KB	-rwxr-xr-x
dh_autoreconf_clean	2.1 KB	-rwxr-xr-x
dh_autotools-dev_restoreconfig	1.79 KB	-rwxr-xr-x
dh_autotools-dev_updateconfig	1.81 KB	-rwxr-xr-x
dh_bash-completion	2.49 KB	-rwxr-xr-x
dh_bugfiles	3.57 KB	-rwxr-xr-x
dh_builddeb	4.96 KB	-rwxr-xr-x
dh_clean	4.89 KB	-rwxr-xr-x
dh_compress	7.05 KB	-rwxr-xr-x
dh_doxygen	4.13 KB	-rwxr-xr-x
dh_dwz	2.9 KB	-rwxr-xr-x
dh_fixperms	5.25 KB	-rwxr-xr-x
dh_gconf	2.62 KB	-rwxr-xr-x
dh_gencontrol	5.85 KB	-rwxr-xr-x
dh_icons	2.03 KB	-rwxr-xr-x
dh_install	11.22 KB	-rwxr-xr-x
dh_installcatalogs	3.23 KB	-rwxr-xr-x
dh_installchangelogs	6.08 KB	-rwxr-xr-x
dh_installcron	1.58 KB	-rwxr-xr-x
dh_installdeb	7.63 KB	-rwxr-xr-x
dh_installdebconf	3.2 KB	-rwxr-xr-x
dh_installdirs	1.95 KB	-rwxr-xr-x
dh_installdocs	14.66 KB	-rwxr-xr-x
dh_installemacsen	3.69 KB	-rwxr-xr-x
dh_installexamples	5.3 KB	-rwxr-xr-x
dh_installgsettings	2.18 KB	-rwxr-xr-x
dh_installifupdown	1.45 KB	-rwxr-xr-x
dh_installinfo	2.85 KB	-rwxr-xr-x
dh_installinit	13.3 KB	-rwxr-xr-x
dh_installlogcheck	1.92 KB	-rwxr-xr-x
dh_installlogrotate	1.12 KB	-rwxr-xr-x
dh_installman	11.04 KB	-rwxr-xr-x
dh_installmanpages	4.89 KB	-rwxr-xr-x
dh_installmenu	2.14 KB	-rwxr-xr-x
dh_installmime	1.29 KB	-rwxr-xr-x
dh_installmodules	2.62 KB	-rwxr-xr-x
dh_installpam	1.12 KB	-rwxr-xr-x
dh_installppp	1.37 KB	-rwxr-xr-x
dh_installsystemd	12.74 KB	-rwxr-xr-x
dh_installtex	17.97 KB	-rwxr-xr-x
dh_installudev	2.04 KB	-rwxr-xr-x
dh_installwm	3.05 KB	-rwxr-xr-x
dh_installxfonts	2.9 KB	-rwxr-xr-x
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x
dh_kubuntu_l10n_clean	959 B	-rwxr-xr-x
dh_kubuntu_l10n_generate	1.85 KB	-rwxr-xr-x
dh_link	4.23 KB	-rwxr-xr-x
dh_lintian	1.28 KB	-rwxr-xr-x
dh_listpackages	756 B	-rwxr-xr-x
dh_makeshlibs	9.01 KB	-rwxr-xr-x
dh_md5sums	2.99 KB	-rwxr-xr-x
dh_missing	5.99 KB	-rwxr-xr-x
dh_movefiles	4.69 KB	-rwxr-xr-x
dh_movelibkdeinit	4.46 KB	-rwxr-xr-x
dh_nodejs	943 B	-rwxr-xr-x
dh_perl	4.23 KB	-rwxr-xr-x
dh_perl_openssl	1.36 KB	-rwxr-xr-x
dh_prep	1.87 KB	-rwxr-xr-x
dh_python2	1.03 KB	-rwxr-xr-x
dh_qmlcdeps	3.22 KB	-rwxr-xr-x
dh_sameversiondep	17.95 KB	-rwxr-xr-x
dh_shlibdeps	6.13 KB	-rwxr-xr-x
dh_sodeps	3.38 KB	-rwxr-xr-x
dh_strip	13.94 KB	-rwxr-xr-x
dh_strip_nondeterminism	2.67 KB	-rwxr-xr-x
dh_systemd_enable	8.97 KB	-rwxr-xr-x
dh_systemd_start	8.31 KB	-rwxr-xr-x
dh_testdir	1.3 KB	-rwxr-xr-x
dh_testroot	1.91 KB	-rwxr-xr-x
dh_ucf	2.27 KB	-rwxr-xr-x
dh_update_autotools_config	1.84 KB	-rwxr-xr-x
dh_usrlocal	3.68 KB	-rwxr-xr-x
diff	142.34 KB	-rwxr-xr-x
diff3	62.21 KB	-rwxr-xr-x
diffimg	9.99 KB	-rwxr-xr-x
diffstat	42.11 KB	-rwxr-xr-x
dig	146.51 KB	-rwxr-xr-x
dijkstra	14.1 KB	-rwxr-xr-x
dircolors	46.19 KB	-rwxr-xr-x
dirmngr	533.55 KB	-rwxr-xr-x
dirmngr-client	106.76 KB	-rwxr-xr-x
dirname	30.18 KB	-rwxr-xr-x
disdvi	18.01 KB	-rwxr-xr-x
do-release-upgrade	6.77 KB	-rwxr-xr-x
dosepsbin	11.8 KB	-rwxr-xr-x
dot	9.99 KB	-rwxr-xr-x
dot2gxl	34.26 KB	-rwxr-xr-x
dot_builtins	10.1 KB	-rwxr-xr-x
dotty	2.04 KB	-rwxr-xr-x
doxygen	14.23 MB	-rwxr-xr-x
doxyindexer	622.23 KB	-rwxr-xr-x
doxysearch.cgi	46.16 KB	-rwxr-xr-x
dpkg	290.5 KB	-rwxr-xr-x
dpkg-architecture	12.55 KB	-rwxr-xr-x
dpkg-buildflags	7.39 KB	-rwxr-xr-x
dpkg-buildpackage	29.1 KB	-rwxr-xr-x
dpkg-checkbuilddeps	7.33 KB	-rwxr-xr-x
dpkg-deb	150.34 KB	-rwxr-xr-x
dpkg-distaddfile	2.72 KB	-rwxr-xr-x
dpkg-divert	138.41 KB	-rwxr-xr-x
dpkg-genbuildinfo	16.38 KB	-rwxr-xr-x
dpkg-genchanges	17.21 KB	-rwxr-xr-x
dpkg-gencontrol	13.73 KB	-rwxr-xr-x
dpkg-gensymbols	10.38 KB	-rwxr-xr-x
dpkg-maintscript-helper	18.58 KB	-rwxr-xr-x
dpkg-mergechangelogs	8.39 KB	-rwxr-xr-x
dpkg-name	6.63 KB	-rwxr-xr-x
dpkg-parsechangelog	4.33 KB	-rwxr-xr-x
dpkg-query	146.4 KB	-rwxr-xr-x
dpkg-scanpackages	8.23 KB	-rwxr-xr-x
dpkg-scansources	8.95 KB	-rwxr-xr-x
dpkg-shlibdeps	30.63 KB	-rwxr-xr-x
dpkg-source	22.75 KB	-rwxr-xr-x
dpkg-split	118.34 KB	-rwxr-xr-x
dpkg-statoverride	70.25 KB	-rwxr-xr-x
dpkg-trigger	66.26 KB	-rwxr-xr-x
dpkg-vendor	3.19 KB	-rwxr-xr-x
dt2dv	40.3 KB	-rwxr-xr-x
dtxgen	13.41 KB	-rwxr-xr-x
du	98.21 KB	-rwxr-xr-x
dumpkeys	166.52 KB	-rwxr-xr-x
dv2dt	19.54 KB	-rwxr-xr-x
dvi2fax	1.07 KB	-rwxr-xr-x
dvi2tty	58.59 KB	-rwxr-xr-x
dviasm	40.63 KB	-rwxr-xr-x
dvibook	26.69 KB	-rwxr-xr-x
dviconcat	26.78 KB	-rwxr-xr-x
dvicopy	62.09 KB	-rwxr-xr-x
dvihp	4.38 KB	-rwxr-xr-x
dviinfox	9.59 KB	-rwxr-xr-x
dvilj	54.51 KB	-rwxr-xr-x
dvilj2p	54.51 KB	-rwxr-xr-x
dvilj4	62.52 KB	-rwxr-xr-x
dvilj4l	62.52 KB	-rwxr-xr-x
dvilj6	62.52 KB	-rwxr-xr-x
dvilualatex	6.07 MB	-rwxr-xr-x
dviluatex	6.07 MB	-rwxr-xr-x
dvipdf	1023 B	-rwxr-xr-x
dvipdfm	751.77 KB	-rwxr-xr-x
dvipdfmx	751.77 KB	-rwxr-xr-x
dvipdft	2.63 KB	-rwxr-xr-x
dvipos	46.48 KB	-rwxr-xr-x
dvips	219.91 KB	-rwxr-xr-x
dvired	3.01 KB	-rwxr-xr-x
dviselect	26.69 KB	-rwxr-xr-x
dvisvgm	4.4 MB	-rwxr-xr-x
dvitodvi	30.72 KB	-rwxr-xr-x
dvitomp	787.71 KB	-rwxr-xr-x
dvitype	46.12 KB	-rwxr-xr-x
dwp	2.75 MB	-rwxr-xr-x
e2pall	2.66 KB	-rwxr-xr-x
eatmydata	2.74 KB	-rwxr-xr-x
ebb	751.77 KB	-rwxr-xr-x
ec2metadata	7.13 KB	-rwxr-xr-x
edgepaint	419.22 KB	-rwxr-xr-x
edit	17.74 KB	-rwxr-xr-x
editdiff	2.01 KB	-rwxr-xr-x
editor	240.11 KB	-rwxr-xr-x
eject	30.69 KB	-rwxr-xr-x
elfedit	30.45 KB	-rwxr-xr-x
enable-ec2-spot-hibernation	237 B	-rwxr-xr-x
enc2xs	41.17 KB	-rwxr-xr-x
encguess	2.99 KB	-rwxr-xr-x
env	34.18 KB	-rwxr-xr-x
envsubst	34.08 KB	-rwxr-xr-x
eps2eps	639 B	-rwxr-xr-x
epspdf	79.25 KB	-rwxr-xr-x
epspdftk	28.65 KB	-rwxr-xr-x
epstopdf	33.3 KB	-rwxr-xr-x
eptex	483.88 KB	-rwxr-xr-x
eqn	193.19 KB	-rwxr-xr-x
etex	806.43 KB	-rwxr-xr-x
euptex	490.24 KB	-rwxr-xr-x
ex	2.55 MB	-rwxr-xr-x
exceltex	18.53 KB	-rwxr-xr-x
expand	38.21 KB	-rwxr-xr-x
expiry	22.27 KB	-rwxr-sr-x
expr	46.18 KB	-rwxr-xr-x
extractbb	751.77 KB	-rwxr-xr-x
factor	74.21 KB	-rwxr-xr-x
fail2ban-client	1.39 KB	-rwxr-xr-x
fail2ban-python	4.32 MB	-rwxr-xr-x
fail2ban-regex	1.25 KB	-rwxr-xr-x
fail2ban-server	1.39 KB	-rwxr-xr-x
fail2ban-testcases	2.23 KB	-rwxr-xr-x
faillog	18.29 KB	-rwxr-xr-x
faked-sysv	26.11 KB	-rwxr-xr-x
faked-tcp	30.1 KB	-rwxr-xr-x
fakeroot	3.76 KB	-rwxr-xr-x
fakeroot-sysv	3.76 KB	-rwxr-xr-x
fakeroot-tcp	3.76 KB	-rwxr-xr-x
fallocate	26.08 KB	-rwxr-xr-x
fc-cache	14.07 KB	-rwxr-xr-x
fc-cat	14.07 KB	-rwxr-xr-x
fc-list	10.07 KB	-rwxr-xr-x
fc-match	10.07 KB	-rwxr-xr-x
fc-pattern	10.07 KB	-rwxr-xr-x
fc-query	10.07 KB	-rwxr-xr-x
fc-scan	10.07 KB	-rwxr-xr-x
fc-validate	10.07 KB	-rwxr-xr-x
fcgistarter	9.99 KB	-rwxr-xr-x
fdp	9.99 KB	-rwxr-xr-x
fftw-wisdom	39.94 KB	-rwxr-xr-x
fftw-wisdom-to-conf	2.23 KB	-rwxr-xr-x
fftwf-wisdom	39.94 KB	-rwxr-xr-x
fftwl-wisdom	39.94 KB	-rwxr-xr-x
fftwq-wisdom	39.94 KB	-rwxr-xr-x
fig4latex	4.52 KB	-rwxr-xr-x
file	22.26 KB	-rwxr-xr-x
filterdiff	47.15 KB	-rwxr-xr-x
find	232.5 KB	-rwxr-xr-x
findhyph	9.71 KB	-rwxr-xr-x
fixcvsdiff	1.83 KB	-rwxr-xr-x
flipdiff	46.58 KB	-rwxr-xr-x
flock	30.16 KB	-rwxr-xr-x
fmt	42.18 KB	-rwxr-xr-x
fmtutil	47.48 KB	-rwxr-xr-x
fmtutil-sys	929 B	-rwxr-xr-x
fmtutil-user	876 B	-rwxr-xr-x
fold	34.18 KB	-rwxr-xr-x
fontinst	552 B	-rwxr-xr-x
free	18.08 KB	-rwxr-xr-x
freetype-config	4.62 KB	-rwxr-xr-x
from	9.99 KB	-rwxr-xr-x
ftp	98.7 KB	-rwxr-xr-x
funzip	21.99 KB	-rwxr-xr-x
futurize	384 B	-rwxr-xr-x
g++	1022.94 KB	-rwxr-xr-x
g++-7	1022.94 KB	-rwxr-xr-x
gapplication	18.07 KB	-rwxr-xr-x
gawk	642.65 KB	-rwxr-xr-x
gc	14.04 KB	-rwxr-xr-x
gcc	1022.94 KB	-rwxr-xr-x
gcc-7	1022.94 KB	-rwxr-xr-x
gcc-ar	30.47 KB	-rwxr-xr-x
gcc-ar-7	30.47 KB	-rwxr-xr-x
gcc-nm	30.47 KB	-rwxr-xr-x
gcc-nm-7	30.47 KB	-rwxr-xr-x
gcc-ranlib	30.47 KB	-rwxr-xr-x
gcc-ranlib-7	30.47 KB	-rwxr-xr-x
gcov	616.09 KB	-rwxr-xr-x
gcov-7	616.09 KB	-rwxr-xr-x
gcov-dump	499.93 KB	-rwxr-xr-x
gcov-dump-7	499.93 KB	-rwxr-xr-x
gcov-tool	535.99 KB	-rwxr-xr-x
gcov-tool-7	535.99 KB	-rwxr-xr-x
gdbus	42.08 KB	-rwxr-xr-x
gdbus-codegen	2 KB	-rwxr-xr-x
gdk-pixbuf-csource	10.01 KB	-rwxr-xr-x
gdk-pixbuf-pixdata	9.99 KB	-rwxr-xr-x
gdk-pixbuf-query-loaders	13.99 KB	-rwxr-xr-x
genbrk	14.48 KB	-rwxr-xr-x
gencat	22.22 KB	-rwxr-xr-x
gencfu	10.43 KB	-rwxr-xr-x
gencnval	22.32 KB	-rwxr-xr-x
gendict	22.55 KB	-rwxr-xr-x
genrb	147.64 KB	-rwxr-xr-x
geqn	193.19 KB	-rwxr-xr-x
getconf	30.13 KB	-rwxr-xr-x
getent	30.49 KB	-rwxr-xr-x
getfacl	22.62 KB	-rwxr-xr-x
getkeycodes	10.07 KB	-rwxr-xr-x
getmapdl	21.37 KB	-rwxr-xr-x
getopt	14.07 KB	-rwxr-xr-x
gettext	34.08 KB	-rwxr-xr-x
gettext.sh	4.52 KB	-rwxr-xr-x
gettextize	42.73 KB	-rwxr-xr-x
gftodvi	50.09 KB	-rwxr-xr-x
gftopk	26.08 KB	-rwxr-xr-x
gftype	26.09 KB	-rwxr-xr-x
ghostscript	9.99 KB	-rwxr-xr-x
ginstall-info	43.09 KB	-rwxr-xr-x
gio	78.09 KB	-rwxr-xr-x
gio-querymodules	9.99 KB	-rwxr-xr-x
git	2.27 MB	-rwxr-xr-x
git-receive-pack	2.27 MB	-rwxr-xr-x
git-shell	1.26 MB	-rwxr-xr-x
git-upload-archive	2.27 MB	-rwxr-xr-x
git-upload-pack	1.27 MB	-rwxr-xr-x
glib-compile-resources	38.07 KB	-rwxr-xr-x
glib-compile-schemas	42.07 KB	-rwxr-xr-x
glib-genmarshal	39.97 KB	-rwxr-xr-x
glib-gettextize	5.25 KB	-rwxr-xr-x
glib-mkenums	27.15 KB	-rwxr-xr-x
gml2gv	38.27 KB	-rwxr-xr-x
gobject-query	10 KB	-rwxr-xr-x
gold	2.97 MB	-rwxr-xr-x
gpasswd	74.05 KB	-rwsr-xr-x
gpg	997.6 KB	-rwxr-xr-x
gpg-agent	392.7 KB	-rwxr-xr-x
gpg-connect-agent	154.85 KB	-rwxr-xr-x
gpg-wks-server	187.02 KB	-rwxr-xr-x
gpg-zip	3.36 KB	-rwxr-xr-x
gpgconf	166.32 KB	-rwxr-xr-x
gpgparsemail	26.07 KB	-rwxr-xr-x
gpgsm	491.09 KB	-rwxr-xr-x
gpgsplit	78.45 KB	-rwxr-xr-x
gpgv	427.02 KB	-rwxr-xr-x
gpic	204.03 KB	-rwxr-xr-x
gprof	99.73 KB	-rwxr-xr-x
graphml2gv	18.08 KB	-rwxr-xr-x
gregorio	614.55 KB	-rwxr-xr-x
grepdiff	47.15 KB	-rwxr-xr-x
gresource	17.99 KB	-rwxr-xr-x
groff	105.31 KB	-rwxr-xr-x
grog	2.71 KB	-rwxr-xr-x
grops	165.72 KB	-rwxr-xr-x
grotty	121.34 KB	-rwxr-xr-x
groups	34.18 KB	-rwxr-xr-x
growpart	21.37 KB	-rwxr-xr-x
grub-editenv	239.93 KB	-rwxr-xr-x
grub-file	659.79 KB	-rwxr-xr-x
grub-fstest	789.65 KB	-rwxr-xr-x
grub-glue-efi	235.77 KB	-rwxr-xr-x
grub-kbdcomp	1.64 KB	-rwxr-xr-x
grub-menulst2cfg	216.04 KB	-rwxr-xr-x
grub-mkfont	264.34 KB	-rwxr-xr-x
grub-mkimage	328.84 KB	-rwxr-xr-x
grub-mklayout	240.09 KB	-rwxr-xr-x
grub-mknetdir	373.41 KB	-rwxr-xr-x
grub-mkpasswd-pbkdf2	244.12 KB	-rwxr-xr-x
grub-mkrelpath	235.49 KB	-rwxr-xr-x
grub-mkrescue	822.23 KB	-rwxr-xr-x
grub-mkstandalone	449.74 KB	-rwxr-xr-x
grub-mount	608.21 KB	-rwxr-xr-x
grub-ntldr-img	38.16 KB	-rwxr-xr-x
grub-render-label	676.16 KB	-rwxr-xr-x
grub-script-check	259.62 KB	-rwxr-xr-x
grub-syslinux2cfg	624.68 KB	-rwxr-xr-x
gs	9.99 KB	-rwxr-xr-x
gsbj	350 B	-rwxr-xr-x
gsdj	352 B	-rwxr-xr-x
gsdj500	352 B	-rwxr-xr-x
gsettings	26.07 KB	-rwxr-xr-x
gsftopk	30.19 KB	-rwxr-xr-x
gslj	353 B	-rwxr-xr-x
gslp	350 B	-rwxr-xr-x
gsnd	277 B	-rwxr-xr-x
gtbl	126.2 KB	-rwxr-xr-x
gtester	22.01 KB	-rwxr-xr-x
gtester-report	18.39 KB	-rwxr-xr-x
gtk-update-icon-cache	30.47 KB	-rwxr-xr-x
gv2gml	18.04 KB	-rwxr-xr-x
gv2gxl	34.26 KB	-rwxr-xr-x
gvcolor	44.26 KB	-rwxr-xr-x
gvgen	22 KB	-rwxr-xr-x
gvmap	559.3 KB	-rwxr-xr-x
gvmap.sh	2.13 KB	-rwxr-xr-x
gvpack	22.23 KB	-rwxr-xr-x
gvpr	5.99 KB	-rwxr-xr-x
gxl2dot	34.26 KB	-rwxr-xr-x
gxl2gv	34.26 KB	-rwxr-xr-x
gyp	276 B	-rwxr-xr-x
h2ph	28.54 KB	-rwxr-xr-x
h2xs	59.44 KB	-rwxr-xr-x
hd	26.1 KB	-rwxr-xr-x
head	42.21 KB	-rwxr-xr-x
helpztags	2.46 KB	-rwxr-xr-x
hexdump	26.1 KB	-rwxr-xr-x
hibagent	21.65 KB	-rwxr-xr-x
host	126.66 KB	-rwxr-xr-x
hostid	30.18 KB	-rwxr-xr-x
hostnamectl	18.07 KB	-rwxr-xr-x
htcacheclean	30 KB	-rwxr-xr-x
htdbm	21.99 KB	-rwxr-xr-x
htdigest	13.99 KB	-rwxr-xr-x
htop	180.68 KB	-rwxr-xr-x
htpasswd	17.99 KB	-rwxr-xr-x
hwe-support-status	10.58 KB	-rwxr-xr-x
i386	18.34 KB	-rwxr-xr-x
iconv	62.25 KB	-rwxr-xr-x
icuinfo	10.32 KB	-rwxr-xr-x
id	42.21 KB	-rwxr-xr-x
ifnames	4.03 KB	-rwxr-xr-x
igawk	3.11 KB	-rwxr-xr-x
info	245.72 KB	-rwxr-xr-x
infobrowser	245.72 KB	-rwxr-xr-x
infocmp	58.07 KB	-rwxr-xr-x
infotocap	82.11 KB	-rwxr-xr-x
inimf	319.62 KB	-rwxr-xr-x
initex	355.66 KB	-rwxr-xr-x
install	142.25 KB	-rwxr-xr-x
install-info	43.09 KB	-rwxr-xr-x
installfont-tl	18.39 KB	-rwxr-xr-x
instmodsh	4.27 KB	-rwxr-xr-x
interdiff	46.58 KB	-rwxr-xr-x
ionice	26.08 KB	-rwxr-xr-x
ipcmk	26.14 KB	-rwxr-xr-x
ipcrm	26.08 KB	-rwxr-xr-x
ipcs	50.08 KB	-rwxr-xr-x
iptables-xml	92.74 KB	-rwxr-xr-x
ischroot	10.04 KB	-rwxr-xr-x
iscsiadm	381.95 KB	-rwxr-xr-x
join	46.21 KB	-rwxr-xr-x
js	17.52 MB	-rwxr-xr-x
json_pp	3.87 KB	-rwxr-xr-x
jsondiff	1018 B	-rwxr-xr-x
jsonlint-php	2.61 KB	-rwxr-xr-x
jsonpatch	3.58 KB	-rwxr-xr-x
jsonpointer	1.31 KB	-rwxr-xr-x
jsonschema	398 B	-rwxr-xr-x
kbdinfo	14.07 KB	-rwxr-xr-x
kbxutil	158.69 KB	-rwxr-xr-x
keep-one-running	3.51 KB	-rwxr-xr-x
kernel-install	4.4 KB	-rwxr-xr-x
killall	23.15 KB	-rwxr-xr-x
kpseaccess	9.99 KB	-rwxr-xr-x
kpsepath	3.38 KB	-rwxr-xr-x
kpsereadlink	9.99 KB	-rwxr-xr-x
kpsestat	9.99 KB	-rwxr-xr-x
kpsetool	3.38 KB	-rwxr-xr-x
kpsewhere	1.41 KB	-rwxr-xr-x
kpsewhich	22.87 KB	-rwxr-xr-x
kpsexpand	3.38 KB	-rwxr-xr-x
landscape-sysinfo	624 B	-rwxr-xr-x
last	42.08 KB	-rwxr-xr-x
lastb	42.08 KB	-rwxr-xr-x
lastlog	18.07 KB	-rwxr-xr-x
latex	806.43 KB	-rwxr-xr-x
latex-git-log	11.11 KB	-rwxr-xr-x
latex-papersize	9.74 KB	-rwxr-xr-x
latex-wordcount	3.1 KB	-rwxr-xr-x
latex2man	54.37 KB	-rwxr-xr-x
latex2nemeth	131 B	-rwxr-xr-x
latexdef	31.71 KB	-rwxr-xr-x
latexfileversion	3.1 KB	-rwxr-xr-x
latexindent	2.64 KB	-rwxr-xr-x
latexpand	11.31 KB	-rwxr-xr-x
lcf	7.6 KB	-rwxr-xr-x
ld	1.7 MB	-rwxr-xr-x
ld.bfd	1.7 MB	-rwxr-xr-x
ld.gold	2.97 MB	-rwxr-xr-x
ldd	5.29 KB	-rwxr-xr-x
lefty	293.57 KB	-rwxr-xr-x
less	166.76 KB	-rwxr-xr-x
lessecho	10.02 KB	-rwxr-xr-x
lessfile	8.36 KB	-rwxr-xr-x
lesskey	19.39 KB	-rwxr-xr-x
lesspipe	8.36 KB	-rwxr-xr-x
letsencrypt	385 B	-rwxr-xr-x
lexgrog	90.57 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
libpng-config	2.41 KB	-rwxr-xr-x
libpng16-config	2.41 KB	-rwxr-xr-x
libtool	363.59 KB	-rwxr-xr-x
libtoolize	126.16 KB	-rwxr-xr-x
libwmf-config	2.3 KB	-rwxr-xr-x
link	30.18 KB	-rwxr-xr-x
lintian	10.59 KB	-rwxr-xr-x
lintian-info	10.59 KB	-rwxr-xr-x
lintian-lab-tool	10.59 KB	-rwxr-xr-x
linux-boot-prober	1.54 KB	-rwxr-xr-x
linux-check-removal	3.99 KB	-rwxr-xr-x
linux-update-symlinks	6.17 KB	-rwxr-xr-x
linux-version	2.63 KB	-rwxr-xr-x
linux32	18.34 KB	-rwxr-xr-x
linux64	18.34 KB	-rwxr-xr-x
listings-ext	12.08 KB	-rwxr-xr-x
lneato	1.51 KB	-rwxr-xr-x
lnstat	22.35 KB	-rwxr-xr-x
loadkeys	206.57 KB	-rwxr-xr-x
loadunimap	26.13 KB	-rwxr-xr-x
locale	49.41 KB	-rwxr-xr-x
locale-check	10 KB	-rwxr-xr-x
localectl	22.07 KB	-rwxr-xr-x
localedef	330.8 KB	-rwxr-xr-x
locate	42.08 KB	-rwxr-sr-x
logger	46.67 KB	-rwxr-xr-x
logname	30.18 KB	-rwxr-xr-x
logresolve	10 KB	-rwxr-xr-x
look	10.23 KB	-rwxr-xr-x
lorder	2.82 KB	-rwxr-xr-x
lsattr	10 KB	-rwxr-xr-x
lsb_release	3.55 KB	-rwxr-xr-x
lscpu	70.08 KB	-rwxr-xr-x
lsdiff	47.15 KB	-rwxr-xr-x
lshw	670.95 KB	-rwxr-xr-x
lsinitramfs	625 B	-rwxr-xr-x
lsipc	70.08 KB	-rwxr-xr-x
lslocks	34.41 KB	-rwxr-xr-x
lslogins	62.08 KB	-rwxr-xr-x
lsmem	42.08 KB	-rwxr-xr-x
lsns	38.08 KB	-rwxr-xr-x
lsof	159.4 KB	-rwxr-xr-x
lspci	79.67 KB	-rwxr-xr-x
lspgpot	1.06 KB	-rwxr-xr-x
lsusb	114.43 KB	-rwxr-xr-x
ltrace	325.21 KB	-rwxr-xr-x
ltxfileinfo	13.46 KB	-rwxr-xr-x
ltximg	33.89 KB	-rwxr-xr-x
luajittex	5.97 MB	-rwxr-xr-x
lualatex	6.07 MB	-rwxr-xr-x
luatex	6.07 MB	-rwxr-xr-x
lwarpmk	15.93 KB	-rwxr-xr-x
lxc	9.8 MB	-rwxr-xr-x
lxcfs	18.07 KB	-rwxr-xr-x
lxd	105 B	-rwxr-xr-x
lzcat	74.36 KB	-rwxr-xr-x
lzcmp	6.48 KB	-rwxr-xr-x
lzdiff	6.48 KB	-rwxr-xr-x
lzegrep	5.76 KB	-rwxr-xr-x
lzfgrep	5.76 KB	-rwxr-xr-x
lzgrep	5.76 KB	-rwxr-xr-x
lzless	1.76 KB	-rwxr-xr-x
lzma	74.36 KB	-rwxr-xr-x
lzmainfo	10.07 KB	-rwxr-xr-x
lzmore	2.11 KB	-rwxr-xr-x
m4	154.3 KB	-rwxr-xr-x
mag	10 KB	-rwxr-xr-x
make	217.57 KB	-rwxr-xr-x
make-first-existing-target	4.79 KB	-rwxr-xr-x
make4ht	1.99 KB	-rwxr-xr-x
makeconv	46.8 KB	-rwxr-xr-x
makedtx	24.53 KB	-rwxr-xr-x
makeglossaries	41.96 KB	-rwxr-xr-x
makeglossaries-lite	11.11 KB	-rwxr-xr-x
makeindex	80.29 KB	-rwxr-xr-x
makejvf	34 KB	-rwxr-xr-x
man	104.5 KB	-rwxr-xr-x
mandb	126.72 KB	-rwxr-xr-x
manifest	1.9 KB	-rwxr-xr-x
manpath	30.47 KB	-rwxr-xr-x
mapscrn	22.13 KB	-rwxr-xr-x
match_parens	6.59 KB	-rwxr-xr-x
mathspic	125.53 KB	-rwxr-xr-x
mawk	122.48 KB	-rwxr-xr-x
mcookie	30.14 KB	-rwxr-xr-x
md5sum	42.21 KB	-rwxr-xr-x
md5sum.textutils	42.21 KB	-rwxr-xr-x
mdig	42.13 KB	-rwxr-xr-x
mendex	112.83 KB	-rwxr-xr-x
mesg	10.07 KB	-rwxr-xr-x
mf	319.62 KB	-rwxr-xr-x
mf-nowin	311.25 KB	-rwxr-xr-x
mf2pt1	37.23 KB	-rwxr-xr-x
mflua	375.62 KB	-rwxr-xr-x
mflua-nowin	375.62 KB	-rwxr-xr-x
mfluajit	375.62 KB	-rwxr-xr-x
mfluajit-nowin	375.62 KB	-rwxr-xr-x
mfplain	787.71 KB	-rwxr-xr-x
mft	46.11 KB	-rwxr-xr-x
migrate-pubring-from-classic-g...	2.14 KB	-rwxr-xr-x
mingle	419.45 KB	-rwxr-xr-x
miniterm	34.28 KB	-rwxr-xr-x
mk_modmap	15.78 KB	-rwxr-xr-x
mkfifo	62.18 KB	-rwxr-xr-x
mkindex	947 B	-rwxr-xr-x
mkjobtexmf	23.61 KB	-rwxr-xr-x
mkocp	171 B	-rwxr-xr-x
mkofm	85 B	-rwxr-xr-x
mkpasswd	18.07 KB	-rwxr-xr-x
mkpic	25.11 KB	-rwxr-xr-x
mksquashfs	184.99 KB	-rwxr-xr-x
mkt1font	33.44 KB	-rwxr-xr-x
mktexfmt	47.48 KB	-rwxr-xr-x
mktexlsr	7.59 KB	-rwxr-xr-x
mktexmf	3.87 KB	-rwxr-xr-x
mktexpk	9.59 KB	-rwxr-xr-x
mktextfm	4.93 KB	-rwxr-xr-x
mlocate	42.08 KB	-rwxr-sr-x
mm2gv	94.19 KB	-rwxr-xr-x
mpost	787.71 KB	-rwxr-xr-x
mptopdf	4.05 KB	-rwxr-xr-x
msgattrib	22.07 KB	-rwxr-xr-x
msgcat	22.07 KB	-rwxr-xr-x
msgcmp	22.08 KB	-rwxr-xr-x
msgcomm	22.07 KB	-rwxr-xr-x
msgconv	18.07 KB	-rwxr-xr-x
msgen	18.07 KB	-rwxr-xr-x
msgexec	14.07 KB	-rwxr-xr-x
msgfilter	26.07 KB	-rwxr-xr-x
msgfmt	78.27 KB	-rwxr-xr-x
msggrep	34.19 KB	-rwxr-xr-x
msginit	62.41 KB	-rwxr-xr-x
msgmerge	66.45 KB	-rwxr-xr-x
msgunfmt	30.09 KB	-rwxr-xr-x
msguniq	18.07 KB	-rwxr-xr-x
msxlint	14.02 KB	-rwxr-xr-x
mtr	71.94 KB	-rwxr-xr-x
mtr-packet	25.99 KB	-rwxr-xr-x
mtrace	6.34 KB	-rwxr-xr-x
myisam_ftdump	3.75 MB	-rwxr-xr-x
mysql	3.81 MB	-rwxr-xr-x
mysql_config_editor	3.46 MB	-rwxr-xr-x
mysql_embedded	21.17 MB	-rwxr-xr-x
mysqladmin	3.71 MB	-rwxr-xr-x
mysqlanalyze	3.73 MB	-rwxr-xr-x
mysqlcheck	3.73 MB	-rwxr-xr-x
mysqldump	3.78 MB	-rwxr-xr-x
mysqldumpslow	7.66 KB	-rwxr-xr-x
mysqlimport	3.7 MB	-rwxr-xr-x
mysqloptimize	3.73 MB	-rwxr-xr-x
mysqlpump	4.17 MB	-rwxr-xr-x
mysqlrepair	3.73 MB	-rwxr-xr-x
mysqlreport	38.1 KB	-rwxr-xr-x
mysqlshow	3.7 MB	-rwxr-xr-x
mysqlslap	3.71 MB	-rwxr-xr-x
namei	26.08 KB	-rwxr-xr-x
nawk	642.65 KB	-rwxr-xr-x
ncal	28.79 KB	-rwxr-xr-x
neato	9.99 KB	-rwxr-xr-x
neqn	908 B	-rwxr-xr-x
netkit-ftp	98.7 KB	-rwxr-xr-x
networkd-dispatcher	19.53 KB	-rwxr-xr-x
newgidmap	36.27 KB	-rwsr-xr-x
newgrp	39.4 KB	-rwsr-xr-x
newuidmap	36.27 KB	-rwsr-xr-x
ngettext	34.08 KB	-rwxr-xr-x
nice	34.18 KB	-rwxr-xr-x
nl	42.27 KB	-rwxr-xr-x
nm	43.27 KB	-rwxr-xr-x
node	17.52 MB	-rwxr-xr-x
node-gyp	3.51 KB	-rwxr-xr-x
nodejs	17.52 MB	-rwxr-xr-x
nohup	34.18 KB	-rwxr-xr-x
nop	10.04 KB	-rwxr-xr-x
npm	1.95 KB	-rwxr-xr-x
nproc	34.18 KB	-rwxr-xr-x
nroff	3.25 KB	-rwxr-xr-x
nsenter	30.28 KB	-rwxr-xr-x
nslookup	130.51 KB	-rwxr-xr-x
nstat	26.07 KB	-rwxr-xr-x
nsupdate	66.02 KB	-rwxr-xr-x
ntfsdecrypt	46.12 KB	-rwxr-xr-x
numfmt	62.24 KB	-rwxr-xr-x
objcopy	230.2 KB	-rwxr-xr-x
objdump	404.55 KB	-rwxr-xr-x
od	66.21 KB	-rwxr-xr-x
odvicopy	66.09 KB	-rwxr-xr-x
odvitype	46.12 KB	-rwxr-xr-x
ofm2opl	124.7 KB	-rwxr-xr-x
omfonts	124.7 KB	-rwxr-xr-x
on_ac_power	2.16 KB	-rwxr-xr-x
openssl	706.98 KB	-rwxr-xr-x
opl2ofm	124.7 KB	-rwxr-xr-x
os-prober	4.44 KB	-rwxr-xr-x
osage	9.99 KB	-rwxr-xr-x
ot2kpx	24.65 KB	-rwxr-xr-x
otangle	42.09 KB	-rwxr-xr-x
otp2ocp	34 KB	-rwxr-xr-x
outocp	14.3 KB	-rwxr-xr-x
ovf2ovp	124.7 KB	-rwxr-xr-x
ovp2ovf	124.7 KB	-rwxr-xr-x
pager	166.76 KB	-rwxr-xr-x
pango-view	50.27 KB	-rwxr-xr-x
paperconf	9.99 KB	-rwxr-xr-x
parsechangelog	8.63 KB	-rwxr-xr-x
partx	86.08 KB	-rwxr-xr-x
passwd	58.24 KB	-rwsr-xr-x
paste	34.21 KB	-rwxr-xr-x
pastebinit	16.25 KB	-rwxr-xr-x
pasteurize	388 B	-rwxr-xr-x
patch	178.37 KB	-rwxr-xr-x
patchwork	9.99 KB	-rwxr-xr-x
patgen	38.07 KB	-rwxr-xr-x
pathchk	34.18 KB	-rwxr-xr-x
pbget	2.51 KB	-rwxr-xr-x
pbibtex	122.09 KB	-rwxr-xr-x
pbput	2.51 KB	-rwxr-xr-x
pbputs	2.51 KB	-rwxr-xr-x
pbr	152 B	-rwxr-xr-x
pcimodules	14.13 KB	-rwxr-xr-x
pcre-config	2.29 KB	-rwxr-xr-x
pdb	45.02 KB	-rwxr-xr-x
pdb2.7	45.02 KB	-rwxr-xr-x
pdb3	59.87 KB	-rwxr-xr-x
pdb3.6	59.87 KB	-rwxr-xr-x
pdf180	256 B	-rwxr-xr-x
pdf270	279 B	-rwxr-xr-x
pdf2dsc	698 B	-rwxr-xr-x
pdf2ps	909 B	-rwxr-xr-x
pdf90	275 B	-rwxr-xr-x
pdfannotextractor	11.5 KB	-rwxr-xr-x
pdfatfi	6.29 KB	-rwxr-xr-x
pdfbook	1.04 KB	-rwxr-xr-x
pdfbook2	10.52 KB	-rwxr-xr-x
pdfclose	13.99 KB	-rwxr-xr-x
pdfcrop	37.62 KB	-rwxr-xr-x
pdfetex	806.43 KB	-rwxr-xr-x
pdfflip	265 B	-rwxr-xr-x
pdfjam	39.19 KB	-rwxr-xr-x
pdfjam-pocketmod	1.53 KB	-rwxr-xr-x
pdfjam-slides3up	858 B	-rwxr-xr-x
pdfjam-slides6up	813 B	-rwxr-xr-x
pdfjoin	759 B	-rwxr-xr-x
pdflatex	806.43 KB	-rwxr-xr-x
pdflatexpicscale	7.27 KB	-rwxr-xr-x
pdfnup	924 B	-rwxr-xr-x
pdfopen	22.07 KB	-rwxr-xr-x
pdfpun	1.55 KB	-rwxr-xr-x
pdftex	806.43 KB	-rwxr-xr-x
pdftosrc	14.1 KB	-rwxr-xr-x
pdfxup	26.57 KB	-rwxr-xr-x
pdvitomp	795.76 KB	-rwxr-xr-x
pdvitype	54.13 KB	-rwxr-xr-x
peekfd	10.2 KB	-rwxr-xr-x
perl	2 MB	-rwxr-xr-x
perl5.26-x86_64-linux-gnu	9.98 KB	-rwxr-xr-x
perl5.26.1	2 MB	-rwxr-xr-x
perlbug	44.78 KB	-rwxr-xr-x
perldoc	125 B	-rwxr-xr-x
perlivp	10.61 KB	-rwxr-xr-x
perltex	14.57 KB	-rwxr-xr-x
perlthanks	44.78 KB	-rwxr-xr-x
pf2afm	498 B	-rwxr-xr-x
pfarrei	4.88 KB	-rwxr-xr-x
pfb2pfa	9.99 KB	-rwxr-xr-x
pfbtopfa	516 B	-rwxr-xr-x
pftp	98.7 KB	-rwxr-xr-x
pgrep	26.09 KB	-rwxr-xr-x
phar	14.48 KB	-rwxr-xr-x
phar.phar	14.48 KB	-rwxr-xr-x
phar.phar5.6	14.48 KB	-rwxr-xr-x
phar5.6	14.48 KB	-rwxr-xr-x
php	4.29 MB	-rwxr-xr-x
php-cgi	4.26 MB	-rwxr-xr-x
php-cgi5.6	4.26 MB	-rwxr-xr-x
php5.6	4.29 MB	-rwxr-xr-x
pic	204.03 KB	-rwxr-xr-x
pico	240.11 KB	-rwxr-xr-x
piconv	8.16 KB	-rwxr-xr-x
pinentry	62.49 KB	-rwxr-xr-x
pinentry-curses	62.49 KB	-rwxr-xr-x
pinky	38.21 KB	-rwxr-xr-x
pk2bm	13.99 KB	-rwxr-xr-x
pkaction	13.99 KB	-rwxr-xr-x
pkcheck	18.07 KB	-rwxr-xr-x
pkexec	21.99 KB	-rwsr-xr-x
pkfix	26.76 KB	-rwxr-xr-x
pkfix-helper	55.29 KB	-rwxr-xr-x
pkg-config	50.09 KB	-rwxr-xr-x
pkgdata	47.26 KB	-rwxr-xr-x
pkgkde-debs2symbols	4.39 KB	-rwxr-xr-x
pkgkde-gensymbols	2.11 KB	-rwxr-xr-x
pkgkde-getbuildlogs	10.41 KB	-rwxr-xr-x
pkgkde-git	5.73 KB	-rwxr-xr-x
pkgkde-mark-private-symbols	2.84 KB	-rwxr-xr-x
pkgkde-mark-qt5-private-symbol...	3.13 KB	-rwxr-xr-x
pkgkde-override-sc-dev-latest	10.5 KB	-rwxr-xr-x
pkgkde-symbolshelper	21.42 KB	-rwxr-xr-x
pkgkde-vcs	5.73 KB	-rwxr-xr-x
pkill	26.09 KB	-rwxr-xr-x
pktogf	26.08 KB	-rwxr-xr-x
pkttyagent	13.99 KB	-rwxr-xr-x
pktype	18.07 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	14.22 KB	-rwxr-xr-x
pltotf	50.08 KB	-rwxr-xr-x
pmap	30.09 KB	-rwxr-xr-x
pmpost	795.76 KB	-rwxr-xr-x
pmxab	542.37 KB	-rwxr-xr-x
pn2pdf	4.14 KB	-rwxr-xr-x
po2debconf	8.47 KB	-rwxr-xr-x
pod2html	4.04 KB	-rwxr-xr-x
pod2man	14.73 KB	-rwxr-xr-x
pod2text	10.72 KB	-rwxr-xr-x
pod2usage	3.86 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
podebconf-display-po	12.67 KB	-rwxr-xr-x
podebconf-report-po	31.76 KB	-rwxr-xr-x
podselect	2.47 KB	-rwxr-xr-x
pollinate	8.54 KB	-rwxr-xr-x
pooltype	14.06 KB	-rwxr-xr-x
pphs	404 B	-rwxr-xr-x
ppltotf	62.09 KB	-rwxr-xr-x
pr	70.27 KB	-rwxr-xr-x
preconv	46.2 KB	-rwxr-xr-x
prepmx	135.32 KB	-rwxr-xr-x
print	17.74 KB	-rwxr-xr-x
printafm	395 B	-rwxr-xr-x
printenv	30.18 KB	-rwxr-xr-x
printerbanner	22 KB	-rwxr-xr-x
printf	50.18 KB	-rwxr-xr-x
prlimit	34.59 KB	-rwxr-xr-x
prove	13.27 KB	-rwxr-xr-x
prtstat	14.07 KB	-rwxr-xr-x
prune	14.04 KB	-rwxr-xr-x
ps2ascii	631 B	-rwxr-xr-x
ps2epsi	2.69 KB	-rwxr-xr-x
ps2frag	229 B	-rwxr-xr-x
ps2pdf	272 B	-rwxr-xr-x
ps2pdf12	215 B	-rwxr-xr-x
ps2pdf13	215 B	-rwxr-xr-x
ps2pdf14	215 B	-rwxr-xr-x
ps2pdfwr	1.07 KB	-rwxr-xr-x
ps2pk	145.47 KB	-rwxr-xr-x
ps2ps	647 B	-rwxr-xr-x
ps2ps2	669 B	-rwxr-xr-x
ps2txt	631 B	-rwxr-xr-x
psfaddtable	17.99 KB	-rwxr-xr-x
psfgettable	17.99 KB	-rwxr-xr-x
psfstriptable	17.99 KB	-rwxr-xr-x
psfxtable	17.99 KB	-rwxr-xr-x
pslatex	1.41 KB	-rwxr-xr-x
pslog	9.99 KB	-rwxr-xr-x
pstree	26.95 KB	-rwxr-xr-x
pstree.x11	26.95 KB	-rwxr-xr-x
ptar	3.47 KB	-rwxr-xr-x
ptardiff	2.57 KB	-rwxr-xr-x
ptargrep	4.29 KB	-rwxr-xr-x
ptex	403.81 KB	-rwxr-xr-x
ptftopl	50.12 KB	-rwxr-xr-x
ptx	70.24 KB	-rwxr-xr-x
purge-old-kernels	1.12 KB	-rwxr-xr-x
pwdx	10.07 KB	-rwxr-xr-x
py3clean	7.63 KB	-rwxr-xr-x
py3compile	11.83 KB	-rwxr-xr-x
py3rsa-decrypt	382 B	-rwxr-xr-x
py3rsa-decrypt-bigfile	398 B	-rwxr-xr-x
py3rsa-encrypt	382 B	-rwxr-xr-x
py3rsa-encrypt-bigfile	398 B	-rwxr-xr-x
py3rsa-keygen	380 B	-rwxr-xr-x
py3rsa-priv2pub	384 B	-rwxr-xr-x
py3rsa-sign	376 B	-rwxr-xr-x
py3rsa-verify	380 B	-rwxr-xr-x
py3versions	11.44 KB	-rwxr-xr-x
pyclean	4.03 KB	-rwxr-xr-x
pycompile	11.62 KB	-rwxr-xr-x
pydoc	79 B	-rwxr-xr-x
pydoc2.7	79 B	-rwxr-xr-x
pydoc3	79 B	-rwxr-xr-x
pydoc3.6	79 B	-rwxr-xr-x
pygettext	21.56 KB	-rwxr-xr-x
pygettext2.7	21.56 KB	-rwxr-xr-x
pygettext3	21.04 KB	-rwxr-xr-x
pygettext3.6	21.04 KB	-rwxr-xr-x
pygmentex	16.07 KB	-rwxr-xr-x
pyhtmlizer3	392 B	-rwxr-xr-x
pyjwt3	372 B	-rwxr-xr-x
python	3.47 MB	-rwxr-xr-x
python2	3.47 MB	-rwxr-xr-x
python2.7	3.47 MB	-rwxr-xr-x
python3	4.32 MB	-rwxr-xr-x
python3-futurize	384 B	-rwxr-xr-x
python3-jsondiff	1018 B	-rwxr-xr-x
python3-jsonpatch	3.58 KB	-rwxr-xr-x
python3-jsonpointer	1.31 KB	-rwxr-xr-x
python3-jsonschema	398 B	-rwxr-xr-x
python3-pasteurize	388 B	-rwxr-xr-x
python3-pbr	152 B	-rwxr-xr-x
python3.6	4.32 MB	-rwxr-xr-x
python3.6m	4.32 MB	-rwxr-xr-x
python3m	4.32 MB	-rwxr-xr-x
pythontex	2.95 KB	-rwxr-xr-x
pythontex3	306 B	-rwxr-xr-x
pyversions	14.75 KB	-rwxr-xr-x
ranlib	58.27 KB	-rwxr-xr-x
rcp	98.14 KB	-rwxr-xr-x
rdma	26.07 KB	-rwxr-xr-x
readelf	582.46 KB	-rwxr-xr-x
realpath	46.21 KB	-rwxr-xr-x
recode-sr-latin	14.07 KB	-rwxr-xr-x
recountdiff	3.36 KB	-rwxr-xr-x
rediff	34.11 KB	-rwxr-xr-x
rename.ul	14.07 KB	-rwxr-xr-x
renice	14.07 KB	-rwxr-xr-x
repstopdf	33.3 KB	-rwxr-xr-x
reset	22 KB	-rwxr-xr-x
resizecons	18.13 KB	-rwxr-xr-x
resizepart	38.08 KB	-rwxr-xr-x
rev	10.07 KB	-rwxr-xr-x
rgrep	30 B	-rwxr-xr-x
rimraf	1.17 KB	-rwxr-xr-x
rlogin	710.79 KB	-rwxr-xr-x
rotatelogs	18.07 KB	-rwxr-xr-x
routef	208 B	-rwxr-xr-x
routel	1.62 KB	-rwxr-xr-x
rpcgen	98.53 KB	-rwxr-xr-x
rpdfcrop	37.62 KB	-rwxr-xr-x
rsh	710.79 KB	-rwxr-xr-x
rst-buildhtml	9.73 KB	-rwxr-xr-x
rst2html	594 B	-rwxr-xr-x
rst2html4	714 B	-rwxr-xr-x
rst2html5	1.11 KB	-rwxr-xr-x
rst2latex	791 B	-rwxr-xr-x
rst2man	600 B	-rwxr-xr-x
rst2odt	764 B	-rwxr-xr-x
rst2odt_prepstyles	2.26 KB	-rwxr-xr-x
rst2pseudoxml	601 B	-rwxr-xr-x
rst2s5	637 B	-rwxr-xr-x
rst2xetex	871 B	-rwxr-xr-x
rst2xml	602 B	-rwxr-xr-x
rstpep2html	670 B	-rwxr-xr-x
rsvg-convert	17.99 KB	-rwxr-xr-x
rsvg-view-3	25.99 KB	-rwxr-xr-x
rsync	496.43 KB	-rwxr-xr-x
rtstat	22.35 KB	-rwxr-xr-x
run-mailcap	17.74 KB	-rwxr-xr-x
run-one	3.51 KB	-rwxr-xr-x
run-one-constantly	3.51 KB	-rwxr-xr-x
run-one-until-failure	3.51 KB	-rwxr-xr-x
run-one-until-success	3.51 KB	-rwxr-xr-x
run-this-one	3.51 KB	-rwxr-xr-x
runcon	34.18 KB	-rwxr-xr-x
rview	2.55 MB	-rwxr-xr-x
rvim	2.55 MB	-rwxr-xr-x
s3fs	522.27 KB	-rwxr-xr-x
savelog	10.22 KB	-rwxr-xr-x
sccmap	14.04 KB	-rwxr-xr-x
scor2prt	88.72 KB	-rwxr-xr-x
scp	98.14 KB	-rwxr-xr-x
screen	455.01 KB	-rwxr-xr-x
screendump	9.99 KB	-rwxr-xr-x
script	30.07 KB	-rwxr-xr-x
scriptreplay	26.08 KB	-rwxr-xr-x
sdiff	50.09 KB	-rwxr-xr-x
see	17.74 KB	-rwxr-xr-x
select-editor	2.38 KB	-rwxr-xr-x
semver	4 KB	-rwxr-xr-x
sensible-browser	1.18 KB	-rwxr-xr-x
sensible-editor	1.08 KB	-rwxr-xr-x
sensible-pager	433 B	-rwxr-xr-x
seq	46.18 KB	-rwxr-xr-x
setarch	18.34 KB	-rwxr-xr-x
setfacl	34.68 KB	-rwxr-xr-x
setkeycodes	10.07 KB	-rwxr-xr-x
setleds	14.05 KB	-rwxr-xr-x
setlogcons	10.07 KB	-rwxr-xr-x
setmetamode	10.1 KB	-rwxr-xr-x
setpci	22.08 KB	-rwxr-xr-x
setsid	10.07 KB	-rwxr-xr-x
setterm	42.08 KB	-rwxr-xr-x
sfdp	9.99 KB	-rwxr-xr-x
sftp	150.35 KB	-rwxr-xr-x
sg	39.4 KB	-rwsr-xr-x
sha1sum	46.21 KB	-rwxr-xr-x
sha224sum	54.21 KB	-rwxr-xr-x
sha256sum	54.21 KB	-rwxr-xr-x
sha384sum	58.21 KB	-rwxr-xr-x
sha512sum	58.21 KB	-rwxr-xr-x
shasum	9.15 KB	-rwxr-xr-x
showconsolefont	18.07 KB	-rwxr-xr-x
showkey	14.07 KB	-rwxr-xr-x
shred	58.21 KB	-rwxr-xr-x
shuf	54.18 KB	-rwxr-xr-x
simpdftex	20.9 KB	-rwxr-xr-x
size	30.3 KB	-rwxr-xr-x
skill	26.08 KB	-rwxr-xr-x
slabtop	18.08 KB	-rwxr-xr-x
slogin	710.79 KB	-rwxr-xr-x
snap	23.88 MB	-rwxr-xr-x
snapctl	8.42 MB	-rwxr-xr-x
snapfuse	38.13 KB	-rwxr-xr-x
snice	26.08 KB	-rwxr-xr-x
soelim	30.2 KB	-rwxr-xr-x
sort	110.47 KB	-rwxr-xr-x
sos	596 B	-rwxr-xr-x
sos-collector	1.04 KB	-rwxr-xr-x
sosreport	1.03 KB	-rwxr-xr-x
sotruss	4.21 KB	-rwxr-xr-x
spellintian	10.59 KB	-rwxr-xr-x
splain	18.7 KB	-rwxr-xr-x
split	54.63 KB	-rwxr-xr-x
splitdiff	3.38 KB	-rwxr-xr-x
splitfont	9.99 KB	-rwxr-xr-x
splitindex	6.2 KB	-rwxr-xr-x
sprof	26.21 KB	-rwxr-xr-x
srcredact	11.78 KB	-rwxr-xr-x
ssh	710.79 KB	-rwxr-xr-x
ssh-add	338.13 KB	-rwxr-xr-x
ssh-agent	354.14 KB	-rwxr-sr-x
ssh-argv0	1.42 KB	-rwxr-xr-x
ssh-copy-id	10.41 KB	-rwxr-xr-x
ssh-import-id	1.73 KB	-rwxr-xr-x
ssh-import-id-gh	782 B	-rwxr-xr-x
ssh-import-id-lp	782 B	-rwxr-xr-x
ssh-keygen	410.16 KB	-rwxr-xr-x
ssh-keyscan	410.16 KB	-rwxr-xr-x
stat	78.21 KB	-rwxr-xr-x
stdbuf	46.18 KB	-rwxr-xr-x
strace	1.31 MB	-rwxr-xr-x
strace-log-merge	2.58 KB	-rwxr-xr-x
strings	30.5 KB	-rwxr-xr-x
strip	230.2 KB	-rwxr-xr-x
sty2dtx	29.88 KB	-rwxr-xr-x
sudo	145.59 KB	-rwsr-xr-x
sudoedit	145.59 KB	-rwsr-xr-x
sudoreplay	54.81 KB	-rwxr-xr-x
sum	38.19 KB	-rwxr-xr-x
svn-multi	10.72 KB	-rwxr-xr-x
symcryptrun	110.73 KB	-rwxr-xr-x
synctex	29.99 KB	-rwxr-xr-x
systemd-analyze	1.49 MB	-rwxr-xr-x
systemd-cat	10.07 KB	-rwxr-xr-x
systemd-cgls	14.07 KB	-rwxr-xr-x
systemd-cgtop	30.09 KB	-rwxr-xr-x
systemd-delta	22.07 KB	-rwxr-xr-x
systemd-detect-virt	10.06 KB	-rwxr-xr-x
systemd-mount	42.09 KB	-rwxr-xr-x
systemd-path	10.06 KB	-rwxr-xr-x
systemd-resolve	86.07 KB	-rwxr-xr-x
systemd-run	42.07 KB	-rwxr-xr-x
systemd-socket-activate	18.07 KB	-rwxr-xr-x
systemd-stdio-bridge	14.07 KB	-rwxr-xr-x
systemd-umount	42.09 KB	-rwxr-xr-x
t1ascii	38.23 KB	-rwxr-xr-x
t1asm	43.27 KB	-rwxr-xr-x
t1binary	38.2 KB	-rwxr-xr-x
t1disasm	42.16 KB	-rwxr-xr-x
t1mac	46.3 KB	-rwxr-xr-x
t1unmac	42.37 KB	-rwxr-xr-x
t4ht	30.08 KB	-rwxr-xr-x
tabs	13.99 KB	-rwxr-xr-x
tac	38.18 KB	-rwxr-xr-x
tail	66.24 KB	-rwxr-xr-x
tangle	46.16 KB	-rwxr-xr-x
taskset	30.08 KB	-rwxr-xr-x
tbl	126.2 KB	-rwxr-xr-x
teckit_compile	1.88 MB	-rwxr-xr-x
tee	34.21 KB	-rwxr-xr-x
telnet	108.42 KB	-rwxr-xr-x
telnet.netkit	108.42 KB	-rwxr-xr-x
test	46.18 KB	-rwxr-xr-x
tex	355.66 KB	-rwxr-xr-x
tex4ebook	4.46 KB	-rwxr-xr-x
tex4ht	98.13 KB	-rwxr-xr-x
texcount	132.42 KB	-rwxr-xr-x
texdef	31.71 KB	-rwxr-xr-x
texdiff	18.85 KB	-rwxr-xr-x
texdirflatten	10.77 KB	-rwxr-xr-x
texdoc	202 B	-rwxr-xr-x
texdoctk	60.25 KB	-rwxr-xr-x
texfot	13.64 KB	-rwxr-xr-x
texhash	7.59 KB	-rwxr-xr-x
texliveonfly	16.92 KB	-rwxr-xr-x
texloganalyser	10.92 KB	-rwxr-xr-x
texlua	6.07 MB	-rwxr-xr-x
texluac	6.07 MB	-rwxr-xr-x
texluajit	5.97 MB	-rwxr-xr-x
texluajitc	5.97 MB	-rwxr-xr-x
texosquery	284 B	-rwxr-xr-x
texosquery-jre5	294 B	-rwxr-xr-x
texosquery-jre8	327 B	-rwxr-xr-x
tftopl	42.1 KB	-rwxr-xr-x
thumbpdf	41.72 KB	-rwxr-xr-x
tic	82.11 KB	-rwxr-xr-x
tie	14 KB	-rwxr-xr-x
time	14.38 KB	-rwxr-xr-x
timedatectl	22.07 KB	-rwxr-xr-x
timeout	38.63 KB	-rwxr-xr-x
tkconch3	386 B	-rwxr-xr-x
tl-paper	4.31 KB	-rwxr-xr-x
tlmgr	308.4 KB	-rwxr-xr-x
tload	14.09 KB	-rwxr-xr-x
tmux	563.56 KB	-rwxr-xr-x
toe	13.99 KB	-rwxr-xr-x
top	105.77 KB	-rwxr-xr-x
touch	86.21 KB	-rwxr-xr-x
tpic2pdftex	12.29 KB	-rwxr-xr-x
tput	18.02 KB	-rwxr-xr-x
tr	46.18 KB	-rwxr-xr-x
tracepath	14.01 KB	-rwxr-xr-x
traceroute6	18.02 KB	-rwsr-xr-x
traceroute6.iputils	18.02 KB	-rwsr-xr-x
tred	14.04 KB	-rwxr-xr-x
tree	75.57 KB	-rwxr-xr-x
trial3	382 B	-rwxr-xr-x
troff	719.34 KB	-rwxr-xr-x
truncate	38.18 KB	-rwxr-xr-x
tset	22 KB	-rwxr-xr-x
tsort	34.18 KB	-rwxr-xr-x
ttf2afm	40.09 KB	-rwxr-xr-x
ttf2pk	106.56 KB	-rwxr-xr-x
ttf2tfm	136.89 KB	-rwxr-xr-x
ttfdump	103.2 KB	-rwxr-xr-x
tty	30.18 KB	-rwxr-xr-x
twist3	382 B	-rwxr-xr-x
twistd3	384 B	-rwxr-xr-x
twopi	9.99 KB	-rwxr-xr-x
typeoutfileinfo	2.13 KB	-rwxr-xr-x
tzselect	15.04 KB	-rwxr-xr-x
ua	4.49 KB	-rwxr-xr-x
ubuntu-advantage	4.49 KB	-rwxr-xr-x
ubuntu-bug	2.5 KB	-rwxr-xr-x
ubuntu-core-launcher	127.21 KB	-rwsr-xr-x
ubuntu-support-status	7.84 KB	-rwxr-xr-x
ucf	39.73 KB	-rwxr-xr-x
ucfq	18.91 KB	-rwxr-xr-x
ucfr	10.47 KB	-rwxr-xr-x
uconv	50.6 KB	-rwxr-xr-x
ul	14.01 KB	-rwxr-xr-x
unattended-upgrade	75.38 KB	-rwxr-xr-x
unattended-upgrades	75.38 KB	-rwxr-xr-x
unexpand	38.21 KB	-rwxr-xr-x
unflatten	14.04 KB	-rwxr-xr-x
unicode_stop	530 B	-rwxr-xr-x
uniq	42.21 KB	-rwxr-xr-x
unlink	30.18 KB	-rwxr-xr-x
unlzma	74.36 KB	-rwxr-xr-x
unmkinitramfs	2.79 KB	-rwxr-xr-x
unshare	18.27 KB	-rwxr-xr-x
unsquashfs	99.71 KB	-rwxr-xr-x
unwrapdiff	5.8 KB	-rwxr-xr-x
unxz	74.36 KB	-rwxr-xr-x
unzip	174.13 KB	-rwxr-xr-x
unzipsfx	78.12 KB	-rwxr-xr-x
upbibtex	124.48 KB	-rwxr-xr-x
update-alternatives	46.01 KB	-rwxr-xr-x
update-mime-database	50.19 KB	-rwxr-xr-x
update-perl-sax-parsers	6.03 KB	-rwxr-xr-x
updatedb	46.08 KB	-rwxr-xr-x
updatedb.mlocate	46.08 KB	-rwxr-xr-x
updmap	85.27 KB	-rwxr-xr-x
updmap-sys	925 B	-rwxr-xr-x
updmap-user	873 B	-rwxr-xr-x
updvitomp	795.76 KB	-rwxr-xr-x
updvitype	56.51 KB	-rwxr-xr-x
upmendex	134.89 KB	-rwxr-xr-x
upmpost	795.76 KB	-rwxr-xr-x
uppltotf	64.48 KB	-rwxr-xr-x
uptex	414.18 KB	-rwxr-xr-x
uptftopl	52.51 KB	-rwxr-xr-x
uptime	10.07 KB	-rwxr-xr-x
usb-devices	4.12 KB	-rwxr-xr-x
usbhid-dump	22.08 KB	-rwxr-xr-x
users	34.18 KB	-rwxr-xr-x
utmpdump	22.07 KB	-rwxr-xr-x
uuidgen	14.07 KB	-rwxr-xr-x
uuidparse	34.08 KB	-rwxr-xr-x
validate-json	6.63 KB	-rwxr-xr-x
vcs-run	6.75 KB	-rwxr-xr-x
vftovp	54.11 KB	-rwxr-xr-x
vi	2.55 MB	-rwxr-xr-x
view	2.55 MB	-rwxr-xr-x
vigpg	2.58 KB	-rwxr-xr-x
vim	2.55 MB	-rwxr-xr-x
vim.basic	2.55 MB	-rwxr-xr-x
vim.tiny	1.06 MB	-rwxr-xr-x
vimdiff	2.55 MB	-rwxr-xr-x
vimdot	1.06 KB	-rwxr-xr-x
vimtutor	2.05 KB	-rwxr-xr-x
vlna	18.12 KB	-rwxr-xr-x
vmhgfs-fuse	50.48 KB	-rwxr-xr-x
vmstat	34.09 KB	-rwxr-xr-x
vmtoolsd	54.25 KB	-rwxr-xr-x
vmware-checkvm	10.07 KB	-rwxr-xr-x
vmware-hgfsclient	10.07 KB	-rwxr-xr-x
vmware-namespace-cmd	17.99 KB	-rwxr-xr-x
vmware-rpctool	17.99 KB	-rwxr-xr-x
vmware-toolbox-cmd	38.28 KB	-rwxr-xr-x
vmware-vgauth-cmd	13.99 KB	-rwxr-xr-x
vmware-vgauth-smoketest	18.01 KB	-rwxr-xr-x
vmware-vmblock-fuse	18.41 KB	-rwxr-xr-x
vmware-xferlogs	10.07 KB	-rwxr-xr-x
volname	9.99 KB	-rwxr-xr-x
vpe	9.4 KB	-rwxr-xr-x
vpl2ovp	40.05 KB	-rwxr-xr-x
vpl2vpl	37.07 KB	-rwxr-xr-x
vptovf	66.09 KB	-rwxr-xr-x
w	18.07 KB	-rwxr-xr-x
w.procps	18.07 KB	-rwxr-xr-x
wall	30.08 KB	-rwxr-sr-x
watch	22.41 KB	-rwxr-xr-x
watchgnupg	13.99 KB	-rwxr-xr-x
wc	42.19 KB	-rwxr-xr-x
weave	66.09 KB	-rwxr-xr-x
wget	487.56 KB	-rwxr-xr-x
whatis	46.98 KB	-rwxr-xr-x
whereis	26.51 KB	-rwxr-xr-x
which	946 B	-rwxr-xr-x
who	50.21 KB	-rwxr-xr-x
whoami	30.18 KB	-rwxr-xr-x
whois	148.54 KB	-rwxr-xr-x
wifi-status	2.06 KB	-rwxr-xr-x
wofm2opl	58.1 KB	-rwxr-xr-x
wopl2ofm	118.08 KB	-rwxr-xr-x
wovf2ovp	74.11 KB	-rwxr-xr-x
wovp2ovf	138.09 KB	-rwxr-xr-x
write	13.99 KB	-rwxr-sr-x
x86_64	18.34 KB	-rwxr-xr-x
x86_64-linux-gnu-addr2line	30.55 KB	-rwxr-xr-x
x86_64-linux-gnu-ar	58.24 KB	-rwxr-xr-x
x86_64-linux-gnu-as	895.98 KB	-rwxr-xr-x
x86_64-linux-gnu-c++filt	26.12 KB	-rwxr-xr-x
x86_64-linux-gnu-cpp	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-cpp-7	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-dwp	2.75 MB	-rwxr-xr-x
x86_64-linux-gnu-elfedit	30.45 KB	-rwxr-xr-x
x86_64-linux-gnu-g++	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-g++-7	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-7	1022.94 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-ar	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-ar-7	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-nm	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-nm-7	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-ranlib	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcc-ranlib-7	30.47 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov	616.09 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov-7	616.09 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov-dump	499.93 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov-dump-7	499.93 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov-tool	535.99 KB	-rwxr-xr-x
x86_64-linux-gnu-gcov-tool-7	535.99 KB	-rwxr-xr-x
x86_64-linux-gnu-gold	2.97 MB	-rwxr-xr-x
x86_64-linux-gnu-gprof	99.73 KB	-rwxr-xr-x
x86_64-linux-gnu-ld	1.7 MB	-rwxr-xr-x
x86_64-linux-gnu-ld.bfd	1.7 MB	-rwxr-xr-x
x86_64-linux-gnu-ld.gold	2.97 MB	-rwxr-xr-x
x86_64-linux-gnu-nm	43.27 KB	-rwxr-xr-x
x86_64-linux-gnu-objcopy	230.2 KB	-rwxr-xr-x
x86_64-linux-gnu-objdump	404.55 KB	-rwxr-xr-x
x86_64-linux-gnu-pkg-config	2.06 KB	-rwxr-xr-x
x86_64-linux-gnu-ranlib	58.27 KB	-rwxr-xr-x
x86_64-linux-gnu-readelf	582.46 KB	-rwxr-xr-x
x86_64-linux-gnu-size	30.3 KB	-rwxr-xr-x
x86_64-linux-gnu-strings	30.5 KB	-rwxr-xr-x
x86_64-linux-gnu-strip	230.2 KB	-rwxr-xr-x
x86_64-pc-linux-gnu-pkg-config	50.09 KB	-rwxr-xr-x
xargs	70.21 KB	-rwxr-xr-x
xauth	50.81 KB	-rwxr-xr-x
xdelta3	150.3 KB	-rwxr-xr-x
xdg-desktop-icon	20.09 KB	-rwxr-xr-x
xdg-desktop-menu	42.2 KB	-rwxr-xr-x
xdg-email	27.27 KB	-rwxr-xr-x
xdg-icon-resource	29.26 KB	-rwxr-xr-x
xdg-mime	41 KB	-rwxr-xr-x
xdg-open	24.65 KB	-rwxr-xr-x
xdg-screensaver	36.79 KB	-rwxr-xr-x
xdg-settings	36.85 KB	-rwxr-xr-x
xdg-user-dir	234 B	-rwxr-xr-x
xdg-user-dirs-update	18.07 KB	-rwxr-xr-x
xdvi	2.96 KB	-rwxr-xr-x
xdvi-xaw	746.3 KB	-rwxr-xr-x
xdvi.bin	746.3 KB	-rwxr-xr-x
xdvipdfmx	751.77 KB	-rwxr-xr-x
xetex	791.99 KB	-rwxr-xr-x
xgettext	260.64 KB	-rwxr-xr-x
xml2-config	1.77 KB	-rwxr-xr-x
xmlcatalog	17.99 KB	-rwxr-xr-x
xmllint	66.82 KB	-rwxr-xr-x
xsltproc	26.08 KB	-rwxr-xr-x
xsubpp	5.04 KB	-rwxr-xr-x
xxd	18.12 KB	-rwxr-xr-x
xz	74.36 KB	-rwxr-xr-x
xzcat	74.36 KB	-rwxr-xr-x
xzcmp	6.48 KB	-rwxr-xr-x
xzdiff	6.48 KB	-rwxr-xr-x
xzegrep	5.76 KB	-rwxr-xr-x
xzfgrep	5.76 KB	-rwxr-xr-x
xzgrep	5.76 KB	-rwxr-xr-x
xzless	1.76 KB	-rwxr-xr-x
xzmore	2.11 KB	-rwxr-xr-x
yes	30.18 KB	-rwxr-xr-x
yplan	10.75 KB	-rwxr-xr-x
zdump	18.05 KB	-rwxr-xr-x
zip	211.19 KB	-rwxr-xr-x
zipcloak	91.62 KB	-rwxr-xr-x
zipdetails	47.36 KB	-rwxr-xr-x
zipgrep	2.88 KB	-rwxr-xr-x
zipinfo	174.13 KB	-rwxr-xr-x
zipnote	87.39 KB	-rwxr-xr-x
zipsplit	91.39 KB	-rwxr-xr-x

Code Editor : mktexfmt

#!/usr/bin/env perl
# $Id: fmtutil.pl 45872 2017-11-21 07:07:45Z preining $
# fmtutil - utility to maintain format files.
# (Maintained in TeX Live:Master/texmf-dist/scripts/texlive.)
# 
# Copyright 2014-2017 Norbert Preining
# This file is licensed under the GNU General Public License version 2
# or any later version.
#
# History:
# Original shell script (C) 2001 Thomas Esser, public domain

my $TEXMFROOT;

BEGIN {
  $^W = 1;
  $TEXMFROOT = `kpsewhich -var-value=TEXMFROOT`;
  if ($?) {
    die "$0: kpsewhich -var-value=TEXMFROOT failed, aborting early.\n";
  }
  chomp($TEXMFROOT);
  unshift(@INC, "$TEXMFROOT/tlpkg", "$TEXMFROOT/texmf-dist/scripts/texlive");
  require "mktexlsr.pl";
  TeX::Update->import();
}

my $svnid = '$Id: fmtutil.pl 45872 2017-11-21 07:07:45Z preining $';
my $lastchdate = '$Date: 2017-11-21 08:07:45 +0100 (Tue, 21 Nov 2017) $';
$lastchdate =~ s/^\$Date:\s*//;
$lastchdate =~ s/ \(.*$//;
my $svnrev = '$Revision: 45872 $';
$svnrev =~ s/^\$Revision:\s*//;
$svnrev =~ s/\s*\$$//;
my $version = "r$svnrev ($lastchdate)";

use strict;
use Getopt::Long qw(:config no_autoabbrev ignore_case_always);
use File::Basename;
use File::Copy;
use File::Spec;
use Cwd;

# don't import anything automatically, this requires us to explicitly
# call functions with TeXLive::TLUtils prefix, and makes it easier to
# find and if necessary remove references to TLUtils
use TeXLive::TLUtils qw();

require TeXLive::TLWinGoo if TeXLive::TLUtils::win32;

# numerical constants
my $FMT_NOTSELECTED = 0;
my $FMT_DISABLED    = 1;
my $FMT_FAILURE     = 2;
my $FMT_SUCCESS     = 3;
my $FMT_NOTAVAIL    = 4;

my $nul = (win32() ? 'nul' : '/dev/null');
my $sep = (win32() ? ';' : ':');

my @deferred_stderr;
my @deferred_stdout;

(our $prg = basename($0)) =~ s/\.pl$//;

# make sure that the main binary path is available at the front
TeXLive::TLUtils::prepend_own_path();

# sudo sometimes does not reset the home dir of root, check on that
# see more comments at the definition of the function itself
# this function checks by itself whether it is running on windows or not
reset_root_home();

chomp(our $TEXMFDIST = `kpsewhich --var-value=TEXMFDIST`);
chomp(our $TEXMFVAR = `kpsewhich -var-value=TEXMFVAR`);
chomp(our $TEXMFSYSVAR = `kpsewhich -var-value=TEXMFSYSVAR`);
chomp(our $TEXMFCONFIG = `kpsewhich -var-value=TEXMFCONFIG`);
chomp(our $TEXMFSYSCONFIG = `kpsewhich -var-value=TEXMFSYSCONFIG`);
chomp(our $TEXMFHOME = `kpsewhich -var-value=TEXMFHOME`);

# make sure that on windows *everything* is in lower case for comparison
if (win32()) {
  $TEXMFDIST = lc($TEXMFDIST);
  $TEXMFVAR = lc($TEXMFVAR);
  $TEXMFSYSVAR = lc($TEXMFSYSVAR);
  $TEXMFCONFIG = lc($TEXMFCONFIG);
  $TEXMFSYSCONFIG = lc($TEXMFSYSCONFIG);
  $TEXMFROOT = lc($TEXMFROOT);
  $TEXMFHOME = lc($TEXMFHOME);
}

#
# these need to be our since they are used from the 
# functions in TLUtils.pm
our $texmfconfig = $TEXMFCONFIG;
our $texmfvar    = $TEXMFVAR;
our $alldata;
# command line options with defaults
# 20160623 - switch to turn on strict mode
our %opts = ( quiet => 0 , strict => 1 );

# make a list of all the commands (as opposed to options), so we can
# reasonably check for multiple commands being (erroneously) given.
my @cmdline_cmds = (  # in same order as help message
  "all",
  "missing",
  "refresh",
  "byengine=s",
  "byfmt=s",
  "byhyphen=s",
  "enablefmt=s",
  "disablefmt=s",
  "listcfg",
  "showhyphen=s",
);

our @cmdline_options = (  # in same order as help message
  "sys",
  "user",
  "cnffile=s@", 
  "fmtdir=s",
  "no-engine-subdir",
  "no-error-if-no-engine=s",
  "no-error-if-no-format",
  "nohash",
  "recorder",
  "strict!",
  "quiet|silent|q",
  "catcfg",
  "dolinks",
  "force",
  "test",
#
  @cmdline_cmds,
  "version",
  "help|h",
#
  "edit",		# omitted from help to discourage use
  "_dumpdata",		# omitted from help, data structure dump for debugging
  );

my $updLSR;
my $mktexfmtMode = 0;
# make sure we echo only *one* line in mktexfmt mode
my $mktexfmtFirst = 1;

my $status = &main();
print_info("exiting with status $status\n");
exit $status;

# 
sub main {
  if ($prg eq "mktexfmt") {
    # mktexfmtMode: if called as mktexfmt, set to true. Will echo the
    # first generated filename after successful generation to stdout then
    # (and nothing else), since kpathsea can only deal with one.
    $mktexfmtMode = 1;

# TODO TODO
    # which mode are we running in?
    # what happens if root runs mktexfmt?
    $opts{'user'} = 1;

GetOptions ( "help" => \$opts{'help'}, "version" => \$opts{'version'} )
        or die "Unknown option in mktexfmt command line arguments\n";
    if ($ARGV[0]) {
      if ($ARGV[0] =~ m/^(.*)\.(fmt|mem|base?)$/) {
        $opts{'byfmt'} = $1;
      } elsif ($ARGV[0] =~ m/\./) {
        die "unknown format type: $ARGV[0]";
      } else {
        $opts{'byfmt'} = $ARGV[0];
      }
    } else {
      die "missing argument to mktexfmt";
    }
  } else {
    # fmtutil mode.
    GetOptions(\%opts, @cmdline_options)
      || die "Try \"$prg --help\" for more information.\n";
    if (@ARGV) {
      die "$0: Unexpected non-option argument(s): @ARGV\n"
          . "Try \"$prg --help\" for more information.\n";
    }
  }

help() if $opts{'help'};
  if ($opts{'version'}) {
    print version();
    exit 0;  # no final print_info
  }

{ # if two commands were given, complain and give up.
    my @cmds = ();
    for my $c (@cmdline_cmds) {
      $c =~ s,=.*$,,;                       # remove =s getopt spec
      push(@cmds, $c) if exists $opts{$c};  # remember if getopt found it
      # we could save/report the specified arg too, but maybe not worth it.
    }
    if (@cmds > 1) {
      print_error("multiple commands found: @cmds\n"
                  . "Try $prg --help if you need it.\n");
      return 1;
    } elsif (@cmds == 0) {
      print_error("no command specified; try $prg --help if you need it.\n");
      return 1;
    }
  }
  
  # these two functions should go to TLUtils (for use in updmap)
  ($texmfconfig, $texmfvar) = 
    TeXLive::TLUtils::setup_sys_user_mode($prg, \%opts,
      $TEXMFCONFIG, $TEXMFSYSCONFIG, $TEXMFVAR, $TEXMFSYSVAR);

determine_config_files("fmtutil.cnf");
  my $changes_config_file = $alldata->{'changes_config'};
  # we do changes always in the used config file with the highest priority
  my $bakFile = $changes_config_file;
  $bakFile =~ s/\.cfg$/.bak/;
  my $changed = 0;

read_fmtutil_files(@{$opts{'cnffile'}});

unless ($opts{"nohash"}) {
    # should be replaced by new mktexlsr perl version
    $updLSR = new TeX::Update;
    $updLSR->mustexist(0);
  }

my $cmd;
  if ($opts{'edit'}) {
    if ($opts{"dry-run"}) {
      printf STDERR "No, are you joking, you want to edit with --dry-run?\n";
      return 1;
    }
    # it's not a good idea to edit fmtutil.cnf manually these days,
    # but for compatibility we'll silently keep the option.
    $cmd = 'edit';
    my $editor = $ENV{'VISUAL'} || $ENV{'EDITOR'};
    $editor ||= (&win32 ? "notepad" : "vi");
    if (-r $changes_config_file) {
      &copyFile($changes_config_file, $bakFile);
    } else {
      touch($bakFile);
      touch($changes_config_file);
    }
    system($editor, $changes_config_file);
    $changed = files_are_different($bakFile, $changes_config_file);

} elsif ($opts{'showhyphen'}) {
    my $f = $opts{'showhyphen'};
    if ($alldata->{'merged'}{$f}) {
      my @all_engines = keys %{$alldata->{'merged'}{$f}};
      for my $e (sort @all_engines) {
        my $hf = $alldata->{'merged'}{$f}{$e}{'hyphen'};
        next if ($hf eq '-');
        my $ff = `kpsewhich -progname='$f' -format=tex '$hf'`;
        chomp($ff);
        if ($ff ne "") {
          if ($#all_engines > 0) {
            printf "$f/$e: ";
          }
          printf "$ff\n";
        } else {
          print_warning("hyphenfile (for $f/$e) not found: $hf\n");
          return 1;
        }
      }
    }

} elsif ($opts{'listcfg'}) {
    return callback_list_cfg();

} elsif ($opts{'disablefmt'}) {
    return callback_enable_disable_format($changes_config_file, 
                                          $opts{'disablefmt'}, 'disabled');
  } elsif ($opts{'enablefmt'}) {
    return callback_enable_disable_format($changes_config_file, 
                                          $opts{'enablefmt'}, 'enabled');
  } elsif ($opts{'byengine'}) {
    return callback_build_formats('byengine', $opts{'byengine'});

} elsif ($opts{'byfmt'}) {
    # for this option, allow/ignore an extension.
    (my $fmtname = $opts{'byfmt'}) =~ s,\.(fmt|mem|base?)$,,;
    return callback_build_formats('byfmt', $fmtname);

} elsif ($opts{'byhyphen'}) {
    return callback_build_formats('byhyphen', $opts{'byhyphen'});

} elsif ($opts{'refresh'}) {
    return callback_build_formats('refresh');

} elsif ($opts{'missing'}) {
    return callback_build_formats('missing');

} elsif ($opts{'all'}) {
    return callback_build_formats('all');

} elsif ($opts{'_dumpdata'}) {
    dump_data();

} else {
    # redundant with check above, but just in case ...
    print_error("missing command; try $prg --help if you need it.\n");
    return 1;
  }

unless ($opts{'nohash'}) {
    # TODO should only do this if built something, e.g., not --listcfg
    print_info("updating ls-R files\n");
    $updLSR->exec() unless $opts{"dry-run"};
  }

# some simpler options 
  return 0;
}

sub dump_data {
  require Data::Dumper;
  $Data::Dumper::Indent = 1;
  $Data::Dumper::Indent = 1;
  print Data::Dumper::Dumper($alldata);
}

#  callback_build_formats - (re)builds the formats as selected,
# returns exit status or dies.  Exit status is always zero unless
# --strict is specified, in which case it's the number of failed builds
# (presumably always less than 256 :).
#
sub callback_build_formats {
  my ($what, $whatarg) = @_;

# set up a tmp dir
  # On W32 it seems that File::Temp creates restrictive permissions (ok)
  # that are copied over with the files created inside it (not ok).
  # So make our own temp dir.
  my $tmpdir;
  if (win32()) {
    my $foo;
    my $tmp_deflt = File::Spec->tmpdir;
    for my $i (1..5) {
      # $foo = "$texmfvar/temp.$$." . int(rand(1000000));
      $foo = (($texmfvar =~ m!^//!) ? $tmp_deflt : $texmfvar)
        . "/temp.$$." . int(rand(1000000));
      if (! -d $foo) {
        TeXLive::TLUtils::mkdirhier($foo);
        sleep 1;
        if (-d $foo) {
          $tmpdir = $foo;
          last;
        }
      }
    }
    if (! $tmpdir) {
      die "Cannot get a temporary directory after five iterations ... sorry!";
    }
    if ($texmfvar =~ m!^//!) {
      # used File::Spec->tmpdir; fix permissions
      TeXLive::TLWinGoo::maybe_make_ro ($tmpdir);
    }
  } else {
    $tmpdir = File::Temp::tempdir(CLEANUP => 1);
  }
  # set up destination directory
  $opts{'fmtdir'} ||= "$texmfvar/web2c";
  TeXLive::TLUtils::mkdirhier($opts{'fmtdir'}) if (! -d $opts{'fmtdir'});
  if (! -w $opts{'fmtdir'}) {
    print_error("format directory not writable: $opts{fmtdir}\n");
    exit 1;
  }
  # since the directory does not exist, we can make it absolute with abs_path
  # without any trickery around non-existing dirs
  $opts{'fmtdir'} = Cwd::abs_path($opts{'fmtdir'});
  # for safety, check again
  die "abs_path failed, strange: $!" if !$opts{'fmtdir'};
  print_info("writing formats under $opts{fmtdir}\n"); # report

# code taken over from the original shell script for KPSE_DOT etc
  my $thisdir = cwd();
  $ENV{'KPSE_DOT'} = $thisdir;

# due to KPSE_DOT, we don't search the current directory, so include
  # it explicitly for formats that \write and later on \read
  $ENV{'TEXINPUTS'} ||= "";
  $ENV{'TEXINPUTS'} = "$tmpdir$sep$ENV{TEXINPUTS}";
  #
  # for formats that load other formats (e.g., jadetex loads latex.fmt),
  # add the current directory to TEXFORMATS, too.  Currently unnecessary
  # for MFBASES and MPMEMS.
  $ENV{'TEXFORMATS'} ||= "";
  $ENV{'TEXFORMATS'} = "$tmpdir$sep$ENV{TEXFORMATS}";

# switch to temporary directory for format generation
  chdir($tmpdir) || die "Cannot change to directory $tmpdir: $!";
  
  # we rebuild formats in two rounds:
  # round 1: only formats with the same name as engine (pdftex/pdftex)
  # round 2: all other formats
  # reason: later formats might need earlier formats to be already
  # initialized, e.g., xmltex.
  my $suc = 0;
  my $err = 0;
  my @err = ();
  my $disabled = 0;
  my $nobuild = 0;
  my $notavail = 0;
  my $total = 0;
  for my $fmt (keys %{$alldata->{'merged'}}) {
    for my $eng (keys %{$alldata->{'merged'}{$fmt}}) {
      next if ($fmt ne $eng);
      $total++;
      my $val = select_and_rebuild_format($fmt, $eng, $what, $whatarg);
      if ($val == $FMT_DISABLED)    { $disabled++; }
      elsif ($val == $FMT_NOTSELECTED) { $nobuild++; }
      elsif ($val == $FMT_FAILURE)  { $err++; push (@err, "$eng/$fmt"); }
      elsif ($val == $FMT_SUCCESS)  { $suc++; }
      elsif ($val == $FMT_NOTAVAIL) { $notavail++; }
      else { print_error("callback_build_format (round 1): unknown return "
             . "from select_and_rebuild.\n"); }
    }
  }
  for my $fmt (keys %{$alldata->{'merged'}}) {
    for my $eng (keys %{$alldata->{'merged'}{$fmt}}) {
      next if ($fmt eq $eng);
      $total++;
      my $val = select_and_rebuild_format($fmt, $eng, $what, $whatarg);
      if ($val == $FMT_DISABLED)    { $disabled++; }
      elsif ($val == $FMT_NOTSELECTED) { $nobuild++; }
      elsif ($val == $FMT_FAILURE)  { $err++; push (@err, "$eng/$fmt"); }
      elsif ($val == $FMT_SUCCESS)  { $suc++; }
      elsif ($val == $FMT_NOTAVAIL) { $notavail++; }
      else { print_error("callback_build_format (round 2): unknown return "
             . "from select_and_rebuild.\n"); }
    }
  }

# if the user asked to rebuild something, but we did nothing, report
  # unless we tried to rebuild only missing formats.
  if ($what ne "missing") {
    if ($err + $suc == 0) {
      print_info("did not find entry for $what=$whatarg, skipped\n");
    }
  }
  my $stdo = ($mktexfmtMode ? \*STDERR : \*STDOUT);
  for (@deferred_stdout) { print $stdo $_; }
  for (@deferred_stderr) { print STDERR $_; }
  #
  print_info("Disabled formats: $disabled\n")        if ($disabled);
  print_info("Successfully rebuilt formats: $suc\n") if ($suc);
  print_info("Not selected formats: $nobuild\n")     if ($nobuild);
  print_info("Not available formats: $notavail\n")   if ($notavail);
  print_info("Failed to build: $err (@err)\n")       if ($err);
  print_info("Total formats: $total\n");
  chdir($thisdir) || warn "chdir($thisdir) failed: $!";
  if (win32()) {
    # try to remove the tmpdir with all files
    TeXLive::TLUtils::rmtree($tmpdir);
  }
   # return 
  return $opts{"strict"} ? $err : 0;
}

#  select_and_rebuild_format
# check condition and rebuild the format if selected
# return values: $FMT_*
# 
sub select_and_rebuild_format {
  my ($fmt, $eng, $what, $whatarg) = @_;
  return $FMT_DISABLED
      if ($alldata->{'merged'}{$fmt}{$eng}{'status'} eq 'disabled');

my ($kpsefmt, $destdir, $fmtfile, $logfile) = compute_format_destination($fmt, $eng);

my $doit = 0;
  # we just identify 'all', 'refresh', 'missing'
  # I don't see much point in keeping all of them
  $doit = 1 if ($what eq 'all');
  $doit = 1 if ($what eq 'refresh' && -r "$destdir/$fmtfile");
  $doit = 1 if ($what eq 'missing' && ! -r "$destdir/$fmtfile");
  $doit = 1 if ($what eq 'byengine' && $eng eq $whatarg);
  $doit = 1 if ($what eq 'byfmt' && $fmt eq $whatarg);
  # TODO
  # original fmtutil.sh was stricter about existence of the hyphen file
  # not sure how we proceed here; let's implicitly ignore.
  #
  # original fmtutil.sh seemed to have accepted full path to the hyphen
  # file, so that one could give
  #   --byhyphen /full/path/to/the/hyphen/file
  # but this does not work anymore (see Debian bug report #815416)
  if ($what eq 'byhyphen') {
    my $fmthyp = (split(/,/ , $alldata->{'merged'}{$fmt}{$eng}{'hyphen'}))[0];
    if ($fmthyp ne '-') {
      if ($whatarg =~ m!^/!) {
        # $whatarg is a full path, we need to expand $fmthyp, too
        chomp (my $fmthyplong = `kpsewhich -progname=$fmt -engine=$eng $fmthyp`) ;
        if ($fmthyplong) {
          $fmthyp = $fmthyplong;
        } else {
          # we might have searched language.dat --engine=tex --progname=tex
          # which will not work. Search again without engine/format
          chomp ($fmthyplong = `kpsewhich $fmthyp`) ;
          if ($fmthyplong) {
            $fmthyp = $fmthyplong;
          } else {
            # don't give warnings or errors, it might be that the hyphen
            # file is not existing at all. See TODO above
            #print_deferred_warning("hyphen $fmthyp for $fmt/$eng cannot be expanded.\n");
          }
        }
      }
      if ($whatarg eq $fmthyp) {
        $doit = 1;
      }
    }
  }
  if ($doit) {
    return rebuild_one_format($fmt, $eng, $kpsefmt, $destdir, $fmtfile, $logfile);
  } else {
    return $FMT_NOTSELECTED;
  }
}

#  compute_format_destination
# takes fmt/eng and returns the location where format and log files should be saved
# return value (dump file full path, log file full path)
sub compute_format_destination {
  my ($fmt, $eng) = @_;
  my $enginedir;
  my $fmtfile = $fmt;
  my $kpsefmt;
  my $destdir;

if ($eng eq "mpost") {
    $fmtfile .= ".mem" ;
    $kpsefmt = "mp" ;
    $enginedir = "metapost"; # the directory, not the executable
  } elsif ($eng =~ m/^mf(lua(jit)?)?(w|-nowin)?$/) {
    $fmtfile .= ".base" ;
    $kpsefmt = "mf" ;
    $enginedir = "metafont" ;
  } else {
    $fmtfile .= ".fmt" ;
    $kpsefmt = "tex" ;
    $enginedir = $eng;
    # strip final -dev from enginedir to support engines like luatex-dev
    $enginedir =~ s/-dev$//;
  }
  if ($opts{'no-engine-subdir'}) {
    $destdir = $opts{'fmtdir'};
  } else {
    $destdir = "$opts{'fmtdir'}/$enginedir";
  }
  return($kpsefmt, $destdir, $fmtfile, "$fmt.log");
}

#  rebuild_one_format
# takes fmt/eng and rebuilds it, irrelevant of any setting
# return value FMT_*
#
sub rebuild_one_format {
  my ($fmt, $eng, $kpsefmt, $destdir, $fmtfile, $logfile) = @_;
  print_info("--- remaking $fmt with $eng\n");

# get variables
  my $hyphen  = $alldata->{'merged'}{$fmt}{$eng}{'hyphen'};
  my $addargs = $alldata->{'merged'}{$fmt}{$eng}{'args'};

# running parameters
  my $jobswitch = "-jobname=$fmt";
  my $prgswitch = "-progname=" ;
  my $recorderswitch = ($opts{'recorder'} ? "-recorder" : "");
  my $pool;
  my $tcx = "";
  my $tcxflag = "";
  my $localpool=0;
  my $texargs;

unlink glob "*.pool";

# addargs processing:
  # can contain:
  # nls stuff (pool/tcx) see below
  # ini file (last argument)
  my $inifile = $addargs;
  $inifile = (split(' ', $addargs))[-1];
  # get rid of leading * in inifiles
  $inifile =~ s/^\*//;

if ($fmt eq "metafun")       { $prgswitch .= "mpost"; }
  elsif ($fmt eq "mptopdf")    { $prgswitch .= "context"; }
  elsif ($fmt =~ m/^cont-..$/) { $prgswitch .= "context"; }
  else                         { $prgswitch .= $fmt; }

# check for existence of ini file before doing anything else
  if (system("kpsewhich -progname=$fmt -format=$kpsefmt $inifile >$nul 2>&1") != 0) {
    # we didn't find the ini file, skip
    print_deferred_warning("inifile $inifile for $fmt/$eng not found.\n");
    # The original script just skipped it but in TeX Live we expect that
    # all activated formats are also buildable, thus return failure.
    return $FMT_FAILURE;
  }

#
  # If the 4th field in fmtutil.cnf contains
  #  -progname=...
  # then we do not add our own progname!
  if ($addargs =~ /-progname=/) {
    $prgswitch = '';
  }

# NLS support
  #   Example (for fmtutil.cnf):
  #     mex-pl tex mexconf.tex nls=tex-pl,il2-pl mex.ini
  # The nls parameter (pool,tcx) can only be specified as the first argument
  # inside the 4th field in fmtutil.cnf.
  if ($addargs =~ m/^nls=([^\s]+)\s+(.*)$/) {
    $texargs = $2;
    ($pool, $tcx) = split(',', $1);
    $tcx || ($tcx = '');
  } else {
    $texargs = $addargs;
  }
  if ($pool) {
    chomp ( my $poolfile = `kpsewhich -progname=$eng $pool.poo 2>$nul` );
    if ($poolfile && -f $poolfile) {
      print_verbose("attempting to create localized format "
                    . "using pool=$pool and tcx=$tcx.\n");
      File::Copy($poolfile, "$eng.pool");
      $tcxflag = "-translate-file=$tcx" if ($tcx);
      $localpool = 1;
    }
  }

# Check for infinite recursion before running the iniengine:
  # We do this check only if we are running in mktexfmt mode
  # otherwise double format definitions will create an infinite loop, too
  if ($mktexfmtMode) {
    if ($ENV{'mktexfmt_loop'}) {
      if ($ENV{'mktexfmt_loop'} =~ m!:$fmt/$eng:!) {
        die "$prg: infinite recursion detected in $fmt/$eng, giving up!";
      }
    } else {
      $ENV{'mktexfmt_loop'} = '';
    }
    $ENV{'mktexfmt_loop'} .= ":$fmt/$eng:";
  }

#
  # check for existence of $engine
  # we do *NOT* use the return value but rely on execution of the shell
  if (!TeXLive::TLUtils::which($eng)) {
    if ($opts{'no-error-if-no-engine'} &&
        ",$opts{'no-error-if-no-engine'}," =~ m/,$eng,/) {
      return $FMT_NOTAVAIL;
    } else {
      print_deferred_error("not building $fmt due to missing engine $eng.\n");
      return $FMT_FAILURE;
    }
  }

my $cmdline = "$eng -ini $tcxflag $recorderswitch $jobswitch "
                  . "$prgswitch $texargs";
  print_verbose("running \`$cmdline' ...\n");

{
    my $texpool = $ENV{'TEXPOOL'};
    if ($localpool) {
      $ENV{'TEXPOOL'} = cwd() . $sep . ($texpool ? $texpool : "");
    }

# in mktexfmtMode we must redirect *all* output to stderr
    $cmdline .= " >&2" if $mktexfmtMode;
    $cmdline .= " <$nul";
    my $retval = system($cmdline);
    if ($retval != 0) {
      $retval /= 256 if ($retval > 0);
      print_deferred_error("running \`$cmdline' return status $retval\n");
      #
      # original shell script did *not* check the return value
      # we keep this behavior, but add an option --strict that
      # errors out on all failures.
      if ($opts{'strict'}) {
        print_deferred_error("return error due to options --strict\n");
        return $FMT_FAILURE;
      }
    }

if ($localpool) {
      if ($texpool) {
        $ENV{'TEXPOOL'} = $texpool;
      } else {
        delete $ENV{'TEXPOOL'};
      }
    }

}

# check and install of fmt and log files
  if (! -f $fmtfile) {
    print_deferred_error("\`$cmdline' failed (no $fmtfile)\n");
    return $FMT_FAILURE;
  }

if (! -f $logfile) {
    print_deferred_error("no log file generated for $fmt/$eng, strange\n");
    return $FMT_FAILURE;
  }

open (LOGFILE, "<$logfile")
    || print_deferred_warning("cannot open $logfile, strange: $!\n");
  my @logfile = <LOGFILE>;
  close LOGFILE;
  if (grep(/^!/, @logfile) > 0) {
    print_deferred_error("\`$cmdline' had errors.\n");
  }

TeXLive::TLUtils::mkdirhier($destdir);
  
  if (!File::Copy::move( $logfile, "$destdir/$logfile")) {
    print_deferred_error("Cannot move $logfile to $destdir.\n");
  }
  if ($opts{'recorder'}) {
    # the recorder output is used by check-fmttriggers to determine
    # package dependencies for each format.  Unfortunately omega-based
    # engines gratuitiously changed the extension from .fls to .ofl.
    my $recfile = $fmt . ($fmt =~ m/^(aleph|lamed)$/ ? ".ofl" : ".fls");
    if (!File::Copy::move( $recfile, "$destdir/$recfile")) {
      print_deferred_error("Cannot move $recfile to $destdir.\n");
    }
  }

my $destfile = "$destdir/$fmtfile";
  if (File::Copy::move( $fmtfile, $destfile )) {
    print_info("$destfile installed.\n");
    #
    # original fmtutil.sh did some magic trick for mplib-luatex.mem
    #
    # nowadays no mplib mem is created and all files loaded
    # so we comment and do not convert this
    #
    # As a special special case, we create mplib-luatex.mem for use by
    # the mplib embedded in luatex if it doesn't already exist.  (We
    # never update it if it does exist.)
    #
    # This is used by the luamplib package.  This way, an expert user
    # who wants to try a new version of luatex (hence with a new
    # version of mplib) can manually update mplib-luatex.mem without
    # having to tamper with mpost itself.
    #
    #  if test "x$format" = xmpost && test "x$engine" = xmpost; then
    #    mplib_mem_name=mplib-luatex.mem
    #    mplib_mem_file=$fulldestdir/$mplib_mem_name
    #    if test \! -f $mplib_mem_file; then
    #      verboseMsg "$progname: copying $destfile to $mplib_mem_file"
    #      if cp "$destfile" "$mplib_mem_file" </dev/null; then
    #        mktexupd "$fulldestdir" "$mplib_mem_name"
    #      else
    #        # failure to copy merits failure handling: e.g., full file system.
    #        log_failure "cp $destfile $mplib_mem_file failed."
    #      fi
    #    else
    #      verboseMsg "$progname: $mplib_mem_file already exists, not updating."
    #    fi
    #  fi

if ($mktexfmtMode && $mktexfmtFirst) {
      print "$destfile\n";
      $mktexfmtFirst = 0;
    }

unless ($opts{'nohash'}) {
      $updLSR->add($destfile);
      $updLSR->exec();
      $updLSR->reset();
    }

return $FMT_SUCCESS;

} else {
    print_deferred_error("Cannot move $fmtfile to $destfile.\n");
    if (-f $destfile) {
      # remove the empty file possibly left over if near-full file system.
      print_verbose("Removing partial file after move failure: $destfile\n");
      unlink($destfile)
        || print_deferred_error("unlink($destfile) failed: $!\n");
    }
    return $FMT_FAILURE;
  }

print_deferred_error("we should not be here! $fmt/$eng\n");
  return $FMT_FAILURE;
}

# 
# enable_disable_format_engine
# assumes that format/engine is already defined somewhere,
# i.e., it $alldata->{'merged'}{$fmt}{$eng} is defined
#
# Return values:
# 1 - success with changes
# 0 - no changes done
# -1 - error appeared
sub enable_disable_format_engine {
  my ($tc, $fmt, $eng, $mode) = @_;
  if ($mode eq 'enabled' || $mode eq 'disabled') {
    if ($alldata->{'merged'}{$fmt}{$eng}{'status'} eq $mode) {
      print_info("Format/engine combination $fmt/$eng already $mode.\n");
      print_info("No changes done.\n");
      return 0;
    } else {
      my $origin = $alldata->{'merged'}{$fmt}{$eng}{'origin'};
      if ($origin ne $tc) {
        $alldata->{'fmtutil'}{$tc}{'formats'}{$fmt}{$eng} =
          {%{$alldata->{'fmtutil'}{$origin}{'formats'}{$fmt}{$eng}}};
        $alldata->{'fmtutil'}{$tc}{'formats'}{$fmt}{$eng}{'line'} = -1;
      }
      $alldata->{'fmtutil'}{$tc}{'formats'}{$fmt}{$eng}{'status'} = $mode;
      $alldata->{'fmtutil'}{$tc}{'changed'} = 1;
      $alldata->{'merged'}{$fmt}{$eng}{'status'} = $mode;
      $alldata->{'merged'}{$fmt}{$eng}{'origin'} = $tc;
      # dump_data();
      return save_fmtutil($tc);
    }
  } else {
    print_error("enable_disable_format_engine: unknown mode $mode\n");
    exit 1;
  }
}

#
# enable a format named
#   format[/engine]
# where the engine part is optional
# Case 1: no "engine" given:
# - if format is defined and has only one engine instance -> activate
# - if format is defined and has more than one engine -> error
# Case 2: engine given:
# - if format/engine is defined -> activate
# - if format/engine is not defined -> error
#
# Return values:
# 1 - success with changes
# 0 - no changes done
# -1 - error appeared
sub callback_enable_disable_format {
  my ($tc, $fmtname, $mode) = @_;
  my ($fmt, $eng) = split('/', $fmtname, 2);
  if ($mode ne 'enabled' && $mode ne 'disabled') {
    print_error("callback_enable_disable_format: unknown mode $mode.\n");
    exit 1;
  }
  if ($eng) {
    if ($alldata->{'merged'}{$fmt}{$eng}) {
      return enable_disable_format_engine($tc, $fmt, $eng, $mode);
    } else {
      print_warning("Format/engine combination $fmt/$eng is not defined.\n");
      print_warning("Cannot (de)activate it.\n");
      return -1;
    }
  } else {
    # no engine given, check the number of entries
    if ($alldata->{'merged'}{$fmt}) {
      my @engs = keys %{$alldata->{'merged'}{$fmt}};
      if (($#engs > 0) || ($#engs == -1)) {
        print_warning("Selected format $fmt not uniquely defined;\n");
        print_warning("possible format/engine combinations:\n");
        for my $e (@engs) {
          print_warning("  $fmt/$e (currently "
                        . $alldata->{'merged'}{$fmt}{$e}{'status'} . ")\n");
        }
        print_warning("Please select one by fully specifying $fmt/ENGINE\n");
        print_warning("No changes done.\n");
        return 0;
      } else {
        # only one engine, enable it if necessary!
        return enable_disable_format_engine($tc, $fmt, $engs[0], $mode);
      }
    } else {
      print_warning("Format $fmt is not defined;\n");
      print_warning("cannot (de)activate it.\n");
      return -1;
    }
  }
}

sub callback_list_cfg {
  my @lines;
  for my $f (keys %{$alldata->{'merged'}}) {
    for my $e (keys %{$alldata->{'merged'}{$f}}) {
      my $orig = $alldata->{'merged'}{$f}{$e}{'origin'};
      my $hyph = $alldata->{'merged'}{$f}{$e}{'hyphen'};
      my $stat = $alldata->{'merged'}{$f}{$e}{'status'};
      my $args = $alldata->{'merged'}{$f}{$e}{'args'};
      push @lines,
        [ "$f/$e/$hyph",
          "$f (engine=$e) $stat\n  hyphen=$hyph, args=$args\n  origin=$orig\n" ];
    }
  }
  # sort lines
  @lines = map { $_->[1] } sort { $a->[0] cmp $b->[0] } @lines;
  print "List of all formats:\n";
  print @lines;
}

# sets %alldata.
# 
sub read_fmtutil_files {
  my (@l) = @_;
  for my $l (@l) { read_fmtutil_file($l); }
  # in case the changes_config is a new one read it in and initialize it here
  # the file might be already readable but not in ls-R so not found by
  # kpsewhich. That means we need to check that it is readable and whether
  # the lines entry is already defined
  my $cc = $alldata->{'changes_config'};
  if ((! -r $cc) || (!$alldata->{'fmtutil'}{$cc}{'lines'}) ) {
    $alldata->{'fmtutil'}{$cc}{'lines'} = [ ];
  }
  #
  $alldata->{'order'} = \@l;
  #
  # determine the origin of all formats
  for my $fn (reverse @l) {
    my @format_names = keys %{$alldata->{'fmtutil'}{$fn}{'formats'}};
    for my $f (@format_names) {
      for my $e (keys %{$alldata->{'fmtutil'}{$fn}{'formats'}{$f}}) {
        $alldata->{'merged'}{$f}{$e}{'origin'} = $fn;
        $alldata->{'merged'}{$f}{$e}{'hyphen'} = 
            $alldata->{'fmtutil'}{$fn}{'formats'}{$f}{$e}{'hyphen'} ;
        $alldata->{'merged'}{$f}{$e}{'status'} = 
            $alldata->{'fmtutil'}{$fn}{'formats'}{$f}{$e}{'status'} ;
        $alldata->{'merged'}{$f}{$e}{'args'} = 
            $alldata->{'fmtutil'}{$fn}{'formats'}{$f}{$e}{'args'} ;
      }
    }
  }
}

# 
sub read_fmtutil_file {
  my $fn = shift;
  open(FN, "<$fn") || die "Cannot read $fn: $!";
  #
  # we count lines from 0 ..!!!!
  my $i = -1;
  my @lines = <FN>;
  chomp(@lines);
  $alldata->{'fmtutil'}{$fn}{'lines'} = [ @lines ];
  close(FN) || warn("$prg: Cannot close $fn: $!");
  for (@lines) {
    $i++;
    chomp;
    next if /^\s*#?\s*$/; # ignore empty and all-blank and just-# lines
    next if /^\s*#[^!]/;  # ignore whole-line comment that is not a disable
    s/#[^!].*//;          # remove within-line comment that is not a disable
    s/#$//;               # remove # at end of line
    my ($a,$b,$c,@rest) = split (' '); # special split rule, leading ws ign
    my $disabled = 0;
    if ($a eq "#!") {
      # we cannot determine whether a line is a proper fmtline or
      # not, so we have to assume that it is
      my $d = shift @rest;
      if (!defined($d)) {
        print_warning("apparently not a real disable line, ignored: $_\n");
        next;
      } else {
        $disabled = 1;
        $a = $b; $b = $c; $c = $d;
      }
    }
    if (defined($alldata->{'fmtutil'}{$fn}{'formats'}{$a}{$b})) {
      print_warning("double mention of $a/$b in $fn\n");
    } else {
      $alldata->{'fmtutil'}{$fn}{'formats'}{$a}{$b}{'hyphen'} = $c;
      $alldata->{'fmtutil'}{$fn}{'formats'}{$a}{$b}{'args'} = "@rest";
      $alldata->{'fmtutil'}{$fn}{'formats'}{$a}{$b}{'status'}
        = ($disabled ? 'disabled' : 'enabled');
      $alldata->{'fmtutil'}{$fn}{'formats'}{$a}{$b}{'line'} = $i;
    }
  }
}

# 
# FUNCTIONS THAT SHOULD GO INTO TLUTILS.PM
# and also be reused in updmap.pl!!!

# sets global $alldata->{'changes_config'} to the config file to be
# changed if requested.
#
sub determine_config_files {
  my $fn = shift;

# config file for changes
  my $changes_config_file;

# determine which config files should be used
  # we also determine here where changes will be saved to
  if ($opts{'cnffile'}) {
    my @tmp;
    for my $f (@{$opts{'cnffile'}}) {
      if (! -f $f) {
        die "$prg: Config file \"$f\" not found.";
      }
      push @tmp, (win32() ? lc($f) : $f);
    }
    @{$opts{'cnffile'}} = @tmp;
    # in case that config files are given on the command line, the first
    # in the list is the one where changes will be written to.
    ($changes_config_file) = @{$opts{'cnffile'}};
  } else {
    my @all_files = `kpsewhich -all $fn`;
    chomp(@all_files);
    my @used_files;
    for my $f (@all_files) {
      push @used_files, (win32() ? lc($f) : $f);
    }
    #
    my $TEXMFLOCALVAR;
    my @TEXMFLOCAL;
    if (win32()) {
      chomp($TEXMFLOCALVAR =`kpsewhich --expand-path=\$TEXMFLOCAL`);
      @TEXMFLOCAL = map { lc } split(/;/ , $TEXMFLOCALVAR);
    } else {
      chomp($TEXMFLOCALVAR =`kpsewhich --expand-path='\$TEXMFLOCAL'`);
      @TEXMFLOCAL = split /:/ , $TEXMFLOCALVAR;
    }
    #
    # search for TEXMFLOCAL/web2c/$fn
    my @tmlused;
    for my $tml (@TEXMFLOCAL) {
      my $TMLabs = Cwd::abs_path($tml);
      next if (!$TMLabs);
      if (-r "$TMLabs/web2c/$fn") {
        push @tmlused, "$TMLabs/web2c/$fn";
      }
    }
    #
    # user mode (no -sys):
    # ====================
    # TEXMFCONFIG    $HOME/.texliveYYYY/texmf-config/web2c/$fn
    # TEXMFVAR       $HOME/.texliveYYYY/texmf-var/web2c/$fn
    # TEXMFHOME      $HOME/texmf/web2c/$fn
    # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/$fn
    # TEXMFSYSVAR    $TEXLIVE/YYYY/texmf-var/web2c/$fn
    # TEXMFLOCAL     $TEXLIVE/texmf-local/web2c/$fn
    # TEXMFDIST      $TEXLIVE/YYYY/texmf-dist/web2c/$fn
    # 
    # root mode (--sys):
    # ==================
    # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/$fn
    # TEXMFSYSVAR    $TEXLIVE/YYYY/texmf-var/web2c/$fn
    # TEXMFLOCAL     $TEXLIVE/texmf-local/web2c/$fn
    # TEXMFDIST      $TEXLIVE/YYYY/texmf-dist/web2c/$fn
    #
    @{$opts{'cnffile'}}  = @used_files;
    #
    # determine the config file that we will use for changes
    # if in the list of used files contains either one from
    # TEXMFHOME or TEXMFCONFIG (which is TEXMFSYSCONFIG in the -sys case)
    # then use the *top* file (which will be either one of the two),
    # if none of the two exists, create a file in TEXMFCONFIG and use it
    my $use_top = 0;
    for my $f (@used_files) {
      if ($f =~ m!(\Q$TEXMFHOME\E|\Q$texmfconfig\E)/web2c/$fn!) {
        $use_top = 1;
        last;
      }
    }
    if ($use_top) {
      ($changes_config_file) = @used_files;
    } else {
      # add the empty config file
      my $dn = "$texmfconfig/web2c";
      $changes_config_file = "$dn/$fn";
    }
  }
  if (!$opts{'quiet'}) {
    print_verbose("$prg is using the following $fn files"
                  . " (in precedence order):\n");
    for my $f (@{$opts{'cnffile'}}) {
      print_verbose("  $f\n");
    }
    print_verbose("$prg is using the following $fn file"
                  . " for writing changes:\n");
    print_verbose("  $changes_config_file\n");
  }
  if ($opts{'listfiles'}) {
    # we listed it above, so be done
    exit 0;
  }

$alldata->{'changes_config'} = $changes_config_file;
}

# returns 1 if actually saved due to changes
sub save_fmtutil {
  my $fn = shift;
  return if $opts{'dry-run'};
  my %fmtf = %{$alldata->{'fmtutil'}{$fn}};
  if ($fmtf{'changed'}) {
    TeXLive::TLUtils::mkdirhier(dirname($fn));
    open (FN, ">$fn") || die "$prg: can't write to $fn: $!";
    my @lines = @{$fmtf{'lines'}};
    if (!@lines) {
      print_verbose ("Creating new config file $fn\n");
      unless ($opts{"nohash"}) {
        # update lsR database
        $updLSR->add($fn);
        $updLSR->exec();
        $updLSR->reset();
      }
    }
    # collect the lines with data
    my %line_to_fmt;
    my @add_fmt;
    if (defined($fmtf{'formats'})) {
      for my $f (keys %{$fmtf{'formats'}}) {
        for my $e (keys %{$fmtf{'formats'}{$f}}) {
          if ($fmtf{'formats'}{$f}{$e}{'line'} == -1) {
            push @add_fmt, [ $f, $e ];
          } else {
            $line_to_fmt{$fmtf{'formats'}{$f}{$e}{'line'}} = [ $f, $e ];
          }
        }
      }
    }
    for my $i (0..$#lines) {
      if (defined($line_to_fmt{$i})) {
        my $f = $line_to_fmt{$i}->[0];
        my $e = $line_to_fmt{$i}->[1];
        my $mode = $fmtf{'formats'}{$f}{$e}{'status'};
        my $args = $fmtf{'formats'}{$f}{$e}{'args'};
        my $hyph = $fmtf{'formats'}{$f}{$e}{'hyphen'};
        my $p = ($mode eq 'disabled' ? "#! " : "");
        print FN "$p$f $e $hyph $args\n";
      } else {
        print FN "$lines[$i]\n";
      }
    }
    # add the new settings and maps
    for my $m (@add_fmt) {
      my $f = $m->[0];
      my $e = $m->[1];
      my $mode = $fmtf{'formats'}{$f}{$e}{'status'};
      my $args = $fmtf{'formats'}{$f}{$e}{'args'};
      my $hyph = $fmtf{'formats'}{$f}{$e}{'hyphen'};
      my $p = ($mode eq 'disabled' ? "#! " : "");
      print FN "$p$f $e $hyph $args\n";
    }
    close(FN) || warn("$prg: Cannot close file handle for $fn: $!");
    delete $alldata->{'fmtutil'}{$fn}{'changed'};
    return 1;
  }
  return 0;
}

#
# $HOME and sudo and updmap-sys horror
#   some instances of sudo do not reset $HOME to the home of root
#   as an effect of "sudo updmap" creates root owned files in the home 
#   of a normal user, and "sudo updmap-sys" uses map files and updmap.cfg
#   files from the directory of a normal user, but creating files
#   in TEXMFSYSCONFIG. This is *all* wrong.
#   we check: if we are running as UID 0 (root) on Unix and the
#   ENV{HOME} is NOT the same as the one of root, then give a warning
#   and reset it to the real home dir of root.

sub reset_root_home {
  if (!win32() && ($> == 0)) {  # $> is effective uid
    my $envhome = $ENV{'HOME'};
    # if $HOME isn't an existing directory, we don't care.
    if (defined($envhome) && (-d $envhome)) {
      # we want to avoid calling getpwuid as far as possible, so if
      # $envhome is one of some usual values we accept it without worrying.
      if ($envhome =~ m,^(/|/root|/var/root)/*$,) {
        return;
      }
      # $HOME is defined, check what is the home of root in reality
      my (undef,undef,undef,undef,undef,undef,undef,$roothome) = getpwuid(0);
      if (defined($roothome)) {
        if ($envhome ne $roothome) {
          print_warning("resetting \$HOME value (was $envhome) to root's "
            . "actual home ($roothome).\n");
          $ENV{'HOME'} = $roothome;
        } else {
          # envhome and roothome do agree, nothing to do, that is the good case
        }
      } else { 
        print_warning("home of root not defined, strange!\n");
      }
    }
  }
}

# printing to stdout (in mktexfmtMode also going to stderr!)
#   print_info    can be suppressed with --quiet
#   print_verbose cannot be suppressed
# printing to stderr
#   print_warning can be suppressed with --quiet
#   print_error   cannot be suppressed
#
sub print_info {
  if ($mktexfmtMode) {
    print STDERR "$prg [INFO]: ", @_ if (!$opts{'quiet'});
  } else {
    print STDOUT "$prg [INFO]: ", @_ if (!$opts{'quiet'});
  }
}
sub print_verbose {
  if ($mktexfmtMode) {
    print STDERR "$prg: ", @_;
  } else {
    print STDOUT "$prg: ", @_;
  }
}
sub print_warning {
  print STDERR "$prg [WARNING]: ", @_ if (!$opts{'quiet'}) 
}
sub print_error {
  print STDERR "$prg [ERROR]: ", @_;
}
#
# same with deferred
sub print_deferred_info {
  push @deferred_stdout, "$prg [INFO]: @_" if (!$opts{'quiet'});
}
sub print_deferred_verbose {
  push @deferred_stdout, "$prg: @_";
}
sub print_deferred_warning {
  push @deferred_stderr, "$prg [WARNING]: @_" if (!$opts{'quiet'}) 
}
sub print_deferred_error {
  push @deferred_stderr, "$prg [ERROR]: @_";
}

# copied from TeXLive::TLUtils to reduce dependencies
sub win32 {
  if ($^O =~ /^MSWin/i) {
    return 1;
  } else {
    return 0;
  }
}

# version, help.

sub version {
  my $ret = sprintf "%s version %s\n", $prg, $version;
  return $ret;
}

sub help {
  my $usage = <<"EOF";
Usage: $prg      [-user|-sys] [OPTION] ... [COMMAND]
   or: $prg-sys  [OPTION] ... [COMMAND]
   or: $prg-user [OPTION] ... [COMMAND]
   or: mktexfmt  FORMAT.fmt|BASE.base|FMTNAME.EXT

Rebuild and manage TeX fmts and Metafont bases, collectively called
"formats" here. (MetaPost no longer uses the past-equivalent "mems".)

If the command name ends in mktexfmt, only one format can be created.
The only options supported are --help and --version, and the command
line must be either a format name, with extension, or a plain name that
is passed as the argument to --byfmt (see below).  The full name of the
generated file (if any) is written to stdout, and nothing else.

If not operating in mktexfmt mode, exactly one command must be given,
extensions should generally not be specified, no non-option arguments
are allowed, and multiple formats can be generated, as follows.

By default, the return status is zero if all formats requested are
successfully built, else nonzero.

Options:
  --sys                   use TEXMFSYS{VAR,CONFIG}
  --user                  use TEXMF{VAR,CONFIG}
  --cnffile FILE          read FILE instead of fmtutil.cnf
                           (can be given multiple times, in which case
                           all the files are used)
  --fmtdir DIR            write formats under DIR instead of TEXMF[SYS]VAR
  --no-engine-subdir      don't use engine-specific subdir of the fmtdir
  --no-error-if-no-format exit successfully if no format is selected
  --no-error-if-no-engine=ENGINE1,ENGINE2,...
                          exit successfully even if a required engine
                           is missing, if it is included in the list.
  --no-strict             exit successfully even if a format fails to build
  --nohash                don't update ls-R files
  --recorder              pass the -recorder option and save .fls files
  --quiet                 be silent
  --catcfg                (does nothing, exists for compatibility)
  --dolinks               (does nothing, exists for compatibility)
  --force                 (does nothing, exists for compatibility)
  --test                  (does nothing, exists for compatibility)

Commands:
  --all                   recreate all format files
  --missing               create all missing format files
  --refresh               recreate only existing format files
  --byengine ENGINE       (re)create formats built with ENGINE
  --byfmt FORMAT          (re)create format FORMAT
  --byhyphen HYPHENFILE   (re)create formats that depend on HYPHENFILE
  --enablefmt  FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
  --disablefmt FORMAT[/ENGINE] disable FORMAT, as built with ENGINE
                          If multiple formats have the same name and
                           different engines, /ENGINE specifier is required.
  --listcfg               list (enabled and disabled) configurations,
                           filtered to available formats
  --showhyphen FORMAT     print name of hyphen file for FORMAT
  --version               show version information and exit
  --help                  show this message and exit

Explanation of trees and files normally used:

If --cnffile is specified on the command line (possibly multiple
  times), its value(s) are used.  Otherwise, fmtutil reads all the
  fmtutil.cnf files found by running \`kpsewhich -all fmtutil.cnf', in the
  order returned by kpsewhich.

In any case, if multiple fmtutil.cnf files are found, all the format
  definitions found in all the fmtutil.cnf files are merged.

Thus, if fmtutil.cnf files are present in all trees, and the default
  layout is used as shipped with TeX Live, the following files are
  read, in the given order.
  
  For fmtutil-sys:
  TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
  TEXMFSYSVAR    \$TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
  TEXMFLOCAL     \$TEXLIVE/texmf-local/web2c/fmtutil.cnf
  TEXMFDIST      \$TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf

For fmtutil-user:
  TEXMFCONFIG    \$HOME/.texliveYYYY/texmf-config/web2c/fmtutil.cnf
  TEXMFVAR       \$HOME/.texliveYYYY/texmf-var/web2c/fmtutil.cnf
  TEXMFHOME      \$HOME/texmf/web2c/fmtutil.cnf
  TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
  TEXMFSYSVAR    \$TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
  TEXMFLOCAL     \$TEXLIVE/texmf-local/web2c/fmtutil.cnf
  TEXMFDIST      \$TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf
  
  (where YYYY is the TeX Live release version).
  
  According to the actions, fmtutil might write to one of the given files
  or create a new fmtutil.cnf, described further below.

Where formats are written:
  
  By default, format files are (re)written in TEXMFSYSVAR/ENGINE by
  fmtutil-sys, and TEXMFVAR/ENGINE by fmtutil, where /ENGINE is a
  subdirectory named for the engine used, such as "pdftex".
  
  If the --fmtdir=DIR option is specified, DIR is used instead of
  TEXMF[SYS]VAR, but the /ENGINE subdir is still used by default.
  
  In any case, if the --no-engine-subdir option is specified, the
  /ENGINE subdir is omitted.
  
Where configuration changes are saved:

If config files are given on the command line, then the first one 
  given will be used to save any changes from --enable or --disable.  
  If the config files are taken from kpsewhich output, then the 
  algorithm is more complex:

1) If \$TEXMFCONFIG/web2c/fmtutil.cnf or \$TEXMFHOME/web2c/fmtutil.cnf
    appears in the list of used files, then the one listed first by
    kpsewhich --all (equivalently, the one returned by kpsewhich
    fmtutil.cnf), is used.
      
    2) If neither of the above two are present and changes are made, a
    new config file is created in \$TEXMFCONFIG/web2c/fmtutil.cnf.
  
  In general, the idea is that if a given config file is not writable, a
  higher-level one can be used.  That way, the distribution's settings
  can be overridden system-wide using TEXMFLOCAL, and system settings
  can be overridden again in a particular user's TEXMFHOME.

Resolving multiple definitions of a format:

If a format is defined in more than one config file, then the definition
  coming from the first-listed fmtutil.cnf is used.

Disabling formats:

fmtutil.cnf files with higher priority (listed earlier) can disable
  formats in lower priority (listed later) fmtutil.cnf files by
  writing a line like
    \#! <fmtname> <enginename> <hyphen> <args>
  in the higher-priority fmtutil.cnf file.   The \#! must be at the
  beginning of the line, with at least one space or tab afterward, and
  there must be whitespace between each word on the list.

For example, you can disable the luajitlatex format by creating
  the file \$TEXMFCONFIG/web2c/fmtutil.cnf with the line
    #! luajitlatex luajittex language.dat,language.dat.lua lualatex.ini
  (As it happens, the luajittex-related formats are precisely why the
  --no-error-if-no-engine option exists, since luajittex cannot be
  compiled on all platforms.)

fmtutil-user (fmtutil -user) vs. fmtutil-sys (fmtutil -sys):

When fmtutil-sys is run or the command line option -sys is used, 
  TEXMFSYSCONFIG and TEXMFSYSVAR are used instead of TEXMFCONFIG and 
  TEXMFVAR, respectively.  This is the primary difference between 
  fmtutil-sys and fmtutil-user.

See http://tug.org/texlive/scripts-sys-user.html for details.

Other locations may be used if you give them on the command line, or
  these trees don't exist, or you are not using the original TeX Live.

Supporting development binaries

If an engine name ends with "-dev", formats are created in
  the respective directory with the -dev stripped.  This allows for
  easily running development binaries in parallel with the released
  binaries.

Report bugs to: tex-live\@tug.org
TeX Live home page: <http://tug.org/texlive/>
EOF
;
  print &version();
  print $usage;
  exit 0; # no final print_info
}

### Local Variables:
### perl-indent-level: 2
### tab-width: 2
### indent-tabs-mode: nil
### End:
# vim:set tabstop=2 expandtab: #

${this.title}

Code Editor : mktexfmt