Linux ip-172-26-7-228 5.4.0-1103-aws #111~18.04.1-Ubuntu SMP Tue May 23 20:04:10 UTC 2023 x86_64
Your IP : 3.15.188.84
/*
* V8 DTrace ustack helper for annotating native stack traces with JavaScript
* function names. We start with a frame pointer (arg1) and emit a string
* describing the current function. We do this by chasing pointers to extract
* the function's name (if any) and the filename and line number where the
* function is defined.
*
* To use the helper, run node, then use the jstack() DTrace action to capture
* a JavaScript stacktrace. You may need to tune the dtrace_helper_actions_max
* kernel variable to 128.
*/
#include <v8constants.h>
#include <v8abbr.h>
/*
* V8 represents small integers (SMI) using the upper 31 bits of a 32/64-bit
* value. To extract the actual integer value, we must shift it over.
*/
#define IS_SMI(value) \
((value & V8_SmiTagMask) == V8_SmiTag)
#define SMI_VALUE(value) \
((uint32_t) ((value) >> V8_SmiValueShift))
#define NO_SHARED_FUNCTION_NAME_SENTINEL NULL
/*
* Heap objects usually start off with a Map pointer, itself another heap
* object. However, during garbage collection, the low order bits of the
* pointer (which are normally 01) are used to record GC state. Of course, we
* have no idea if we're in GC or not, so we must always normalize the pointer.
*/
#define V8_MAP_PTR(ptr) \
((ptr & ~V8_HeapObjectTagMask) | V8_HeapObjectTag)
#define V8_TYPE_SCRIPT(type) \
((type) == V8_IT_SCRIPT)
/*
* Determine the encoding and representation of a V8 string.
*/
#define V8_TYPE_STRING(type) \
(((type) & V8_IsNotStringMask) == V8_StringTag)
#define V8_STRENC_ASCII(type) \
(((type) & V8_StringEncodingMask) == V8_AsciiStringTag)
#define V8_STRREP_SEQ(type) \
(((type) & V8_StringRepresentationMask) == V8_SeqStringTag)
#define V8_STRREP_CONS(type) \
(((type) & V8_StringRepresentationMask) == V8_ConsStringTag)
#define V8_STRREP_EXT(type) \
(((type) & V8_StringRepresentationMask) == V8_ExternalStringTag)
/*
* String type predicates
*/
#define ASCII_SEQSTR(value) \
(V8_TYPE_STRING(value) && V8_STRENC_ASCII(value) && V8_STRREP_SEQ(value))
#define TWOBYTE_SEQSTR(value) \
(V8_TYPE_STRING(value) && !V8_STRENC_ASCII(value) && V8_STRREP_SEQ(value))
#define IS_CONSSTR(value) \
(V8_TYPE_STRING(value) && V8_STRREP_CONS(value))
#define ASCII_EXTSTR(value) \
(V8_TYPE_STRING(value) && V8_STRENC_ASCII(value) && V8_STRREP_EXT(value))
/*
* General helper macros
*/
#define COPYIN_UINT8(addr) (*(uint8_t*) copyin((addr), sizeof(uint8_t)))
#define COPYIN_UINT32(addr) (*(uint32_t*) copyin((addr), sizeof(uint32_t)))
#define COPYIN_UINT64(addr) (*(uint64_t*) copyin((addr), sizeof(uint64_t)))
#if defined(__i386)
# define COPYIN_PTR(addr) COPYIN_UINT32(addr)
# define off_t uint32_t
# define APPEND_PTR(p) APPEND_PTR_32(p)
#else
# define COPYIN_PTR(addr) COPYIN_UINT64(addr)
# define off_t uint64_t
# define APPEND_PTR(p) APPEND_PTR_64(p)
#endif
#define APPEND_CHR(c) (this->buf[this->off++] = (c))
#define APPEND_CHR4(s0, s1, s2, s3) \
APPEND_CHR(s0); \
APPEND_CHR(s1); \
APPEND_CHR(s2); \
APPEND_CHR(s3);
#define APPEND_CHR8(s0, s1, s2, s3, s4, s5, s6, s7) \
APPEND_CHR4(s0, s1, s2, s3) \
APPEND_CHR4(s4, s5, s6, s7)
#define APPEND_DGT(i, d) \
(((i) / (d)) ? APPEND_CHR('0' + ((i)/(d) % 10)) : 0)
#define APPEND_NUM(i) \
APPEND_DGT((i), 100000); \
APPEND_DGT((i), 10000); \
APPEND_DGT((i), 1000); \
APPEND_DGT((i), 100); \
APPEND_DGT((i), 10); \
APPEND_DGT((i), 1);
#define APPEND_HEX(d) \
APPEND_CHR((d) < 10 ? '0' + (d) : 'a' - 10 + (d))
#define APPEND_PTR_32(p) \
APPEND_HEX((p >> 28) & 0xf); \
APPEND_HEX((p >> 24) & 0xf); \
APPEND_HEX((p >> 20) & 0xf); \
APPEND_HEX((p >> 16) & 0xf); \
APPEND_HEX((p >> 12) & 0xf); \
APPEND_HEX((p >> 8) & 0xf); \
APPEND_HEX((p >> 4) & 0xf); \
APPEND_HEX((p) & 0xf);
#define APPEND_PTR_64(p) \
APPEND_PTR_32(p >> 32) \
APPEND_PTR_32(p)
/*
* The following macros are used to output ASCII SeqStrings, ConsStrings, and
* Node.js ExternalStrings. To represent each string, we use three fields:
*
* "str": a pointer to the string itself
*
* "len": the string length
*
* "attrs": the type identifier for the string, which indicates the
* encoding and representation. We're only interested in strings
* whose representation is one of:
*
* SeqOneByteString stored directly as a char array inside the object
*
* SeqTwoByteString stored as a UTF-16 char array inside the object
*
* ConsString pointer to two strings that should be concatenated
*
* ExternalString pointer to a char* outside the V8 heap
*/
/*
* Load "len" and "attrs" for the given "str".
*/
#define LOAD_STRFIELDS(str, len, attrs) \
len = SMI_VALUE(COPYIN_PTR(str + V8_OFF_STR_LENGTH)); \
this->map = V8_MAP_PTR(COPYIN_PTR(str + V8_OFF_HEAPOBJ_MAP)); \
attrs = COPYIN_UINT8(this->map + V8_OFF_MAP_ATTRS);
#define APPEND_SEQSTR(str, len, attrs) \
APPEND_SEQONEBYTESTR(str, len, attrs) \
APPEND_SEQTWOBYTESTR(str, len, attrs)
/*
* Print out the given SeqOneByteString, or do nothing if the string is not an ASCII
* SeqOneByteString.
*/
#define APPEND_SEQONEBYTESTR(str, len, attrs) \
dtrace:helper:ustack: \
/!this->done && len > 0 && ASCII_SEQSTR(attrs)/ \
{ \
copyinto(str + V8_OFF_STR_CHARS, len, this->buf + this->off); \
this->off += len; \
}
/*
* LOOP_ITER: macro to paste "block" while "ivar" is less than "dynmax" and
* "statmax". The subsequent LOOP_{4,8} macros facilitate pasting the same
* thing 4 and 8 times, respectively. Like much of the rest of the code in this
* file, this is regrettably necessary given the constraints under which we're
* expected to run.
*/
#define LOOP_ITER(ivar, dynmax, statmax, block) \
((ivar) < (dynmax)) && ((ivar) < (statmax)) && (block); (ivar)++;
#define LOOP_4(block) \
block \
block \
block \
block \
#define LOOP_8(block) \
LOOP_4(block) \
LOOP_4(block)
/*
* Print out the given SeqTwoByteString, or do nothing if the string is not an ASCII
* SeqTwoByteString. NOTE: if you bump MAX_TWOBYTESTR_CHARS, you'll also need
* to modify the LOOP_* macro calls below to match.
*/
#define MAX_TWOBYTESTR_CHARS 128
#define MAX_TWOBYTESTR_BYTES (2 * MAX_TWOBYTESTR_CHARS)
#define TO_ASCII(c) ((c) < 128 ? (c) : '?')
#define APPEND_SEQTWOBYTESTR(str, len, attrs) \
dtrace:helper:ustack: \
/!this->done && len > 0 && TWOBYTE_SEQSTR(attrs)/ \
{ \
this->i = 0; \
this->stbuf = (uint16_t *)alloca(MAX_TWOBYTESTR_BYTES + 2); \
copyinto(str + V8_OFF_TWOBYTESTR_CHARS, \
MAX_TWOBYTESTR_BYTES, this->stbuf); \
this->stbuf[MAX_TWOBYTESTR_BYTES - 1] = '\0'; \
this->stbuf[MAX_TWOBYTESTR_BYTES] = '\0'; \
\
LOOP_8(LOOP_8(LOOP_4(LOOP_ITER(this->i, len, \
MAX_TWOBYTESTR_CHARS, \
APPEND_CHR(TO_ASCII(this->stbuf[this->i])))))) \
\
this->i = 0; \
this->stbuf = 0; \
}
/*
* Print out the given Node.js ExternalString, or do nothing if the string is
* not an ASCII ExternalString.
*/
#define APPEND_NODESTR(str, len, attrs) \
dtrace:helper:ustack: \
/!this->done && len > 0 && ASCII_EXTSTR(attrs)/ \
{ \
this->resource = COPYIN_PTR(str + V8_OFF_EXTSTR_RSRC); \
this->dataptr = COPYIN_PTR(this->resource + NODE_OFF_EXTSTR_DATA); \
copyinto(this->dataptr, len, this->buf + this->off); \
this->off += len; \
}
/*
* Recall that each ConsString points to two other strings which are
* semantically concatenated. Of course, these strings may themselves by
* ConsStrings, but in D we can only expand this recursion to a finite level.
* Thankfully, function and script names are generally not more than a few
* levels deep, so we unroll the expansion up to three levels. Even this is
* pretty hairy: we use strings "s0", ..., "s13", (each with "str", "len", and
* "attr" fields -- see above) to store the expanded strings. We expand the
* original string into s0 and s7, then s0 into s1 and s4, etc:
*
*
* +---- str ----+
* / \ <-- 1st expansion
* / \
* s0 s7
* / \ / \
* / \ / \ <-- 2nd expansion
* / \ / \
* s1 s4 s8 s11
* / \ / \ / \ / \ <-- 3rd expansion
* s2 s3 s5 s6 s9 s10 s12 s13
*
* Of course, for a given string, any of these expansions may not be needed.
* For example, we may expand str and find that s0 is already a SeqString,
* while s7 requires further expansion. So when we expand a ConsString, we
* zero the length of the string itself, and then at the end we print out
* all non-zero-length strings in order (including both internal nodes and
* leafs in the tree above) to get the final output.
*/
#define EXPAND_START() \
dtrace:helper:ustack: \
/!this->done/ \
{ \
this->s0str = this->s1str = this->s2str = (off_t) 0; \
this->s3str = this->s4str = this->s5str = (off_t) 0; \
this->s6str = this->s7str = this->s8str = (off_t) 0; \
this->s9str = this->s10str = this->s11str = (off_t) 0; \
this->s12str = this->s13str = (off_t) 0; \
\
this->s0len = this->s1len = this->s2len = (off_t) 0; \
this->s3len = this->s4len = this->s5len = (off_t) 0; \
this->s6len = this->s7len = this->s8len = (off_t) 0; \
this->s9len = this->s10len = this->s11len = (off_t) 0; \
this->s12len = this->s13len = (off_t) 0; \
\
this->s0attrs = this->s1attrs = this->s2attrs = 0; \
this->s3attrs = this->s4attrs = this->s5attrs = 0; \
this->s6attrs = this->s7attrs = this->s8attrs = 0; \
this->s9attrs = this->s10attrs = this->s11attrs = 0; \
this->s12attrs = this->s13attrs = 0; \
}
/*
* Expand the ConsString "str" (represented by "str", "len", and "attrs") into
* strings "s1" (represented by "s1s", "s1l", and "s1a") and "s2" (represented
* by "s2s", "s2l", "s2a"). If "str" is not a ConsString, do nothing.
*/
#define EXPAND_STR(str, len, attrs, s1s, s1l, s1a, s2s, s2l, s2a) \
dtrace:helper:ustack: \
/!this->done && len > 0 && IS_CONSSTR(attrs)/ \
{ \
len = 0; \
\
s1s = COPYIN_PTR(str + V8_OFF_CONSSTR_CAR); \
LOAD_STRFIELDS(s1s, s1l, s1a) \
\
s2s = COPYIN_PTR(str + V8_OFF_CONSSTR_CDR); \
LOAD_STRFIELDS(s2s, s2l, s2a) \
}
/*
* Print out a ConsString by expanding it up to three levels and printing out
* the resulting SeqStrings.
*/
#define APPEND_CONSSTR(str, len, attrs) \
EXPAND_START() \
EXPAND_STR(str, len, attrs, \
this->s0str, this->s0len, this->s0attrs, \
this->s7str, this->s7len, this->s7attrs) \
EXPAND_STR(this->s0str, this->s0len, this->s0attrs, \
this->s1str, this->s1len, this->s1attrs, \
this->s4str, this->s4len, this->s4attrs) \
EXPAND_STR(this->s1str, this->s1len, this->s1attrs, \
this->s2str, this->s2len, this->s2attrs, \
this->s3str, this->s3len, this->s3attrs) \
EXPAND_STR(this->s4str, this->s4len, this->s4attrs, \
this->s5str, this->s5len, this->s5attrs, \
this->s6str, this->s6len, this->s6attrs) \
EXPAND_STR(this->s7str, this->s7len, this->s7attrs, \
this->s8str, this->s8len, this->s8attrs, \
this->s11str, this->s11len, this->s11attrs) \
EXPAND_STR(this->s8str, this->s8len, this->s8attrs, \
this->s9str, this->s9len, this->s9attrs, \
this->s10str, this->s10len, this->s10attrs) \
EXPAND_STR(this->s11str, this->s11len, this->s11attrs, \
this->s12str, this->s12len, this->s12attrs, \
this->s13str, this->s13len, this->s13attrs) \
\
APPEND_SEQSTR(str, len, attrs) \
APPEND_SEQSTR(this->s0str, this->s0len, this->s0attrs) \
APPEND_SEQSTR(this->s1str, this->s1len, this->s1attrs) \
APPEND_SEQSTR(this->s2str, this->s2len, this->s2attrs) \
APPEND_SEQSTR(this->s3str, this->s3len, this->s3attrs) \
APPEND_SEQSTR(this->s4str, this->s4len, this->s4attrs) \
APPEND_SEQSTR(this->s5str, this->s5len, this->s5attrs) \
APPEND_SEQSTR(this->s6str, this->s6len, this->s6attrs) \
APPEND_SEQSTR(this->s7str, this->s7len, this->s7attrs) \
APPEND_SEQSTR(this->s8str, this->s8len, this->s8attrs) \
APPEND_SEQSTR(this->s9str, this->s9len, this->s9attrs) \
APPEND_SEQSTR(this->s10str, this->s10len, this->s10attrs) \
APPEND_SEQSTR(this->s11str, this->s11len, this->s11attrs) \
APPEND_SEQSTR(this->s12str, this->s12len, this->s12attrs) \
APPEND_SEQSTR(this->s13str, this->s13len, this->s13attrs) \
/*
* Print out the given SeqString, ConsString, or ExternalString.
* APPEND_CONSSTR implicitly handles SeqStrings as the degenerate case of an
* expanded ConsString.
*/
#define APPEND_V8STR(str, len, attrs) \
APPEND_CONSSTR(str, len, attrs) \
APPEND_NODESTR(str, len, attrs)
/*
* In this first clause we initialize all variables. We must explicitly clear
* them because they may contain values left over from previous iterations.
*/
dtrace:helper:ustack:
{
/* input */
this->fp = arg1;
/* output/flow control */
this->buf = (char*) alloca(128);
this->off = 0;
this->done = 0;
/* program state */
this->ctx = (off_t) 0;
this->marker = (off_t) 0;
this->func = (off_t) 0;
this->shared = (off_t) 0;
this->map = (off_t) 0;
this->attrs = 0;
this->funcrawnamestr = (off_t) 0;
this->hassharedname = 0;
this->funcnamelen = 0;
this->funcnameattrs = 0;
this->script = (off_t) 0;
this->scriptattrs = 0;
this->scriptnamestr = (off_t) 0;
this->scriptnamelen = 0;
this->scriptnameattrs = 0;
this->position = 0;
this->line_ends = (off_t) 0;
this->le_attrs = 0;
/* binary search fields */
this->bsearch_min = 0;
this->bsearch_max = 0;
this->ii = 0;
}
/*
* Like V8, we first check if we've got an ArgumentsAdaptorFrame. We've got
* nothing to add for such frames, so we bail out quickly.
*/
dtrace:helper:ustack:
{
this->ctx = COPYIN_PTR(this->fp + V8_OFF_FP_CONTEXT);
}
dtrace:helper:ustack:
/IS_SMI(this->ctx) && SMI_VALUE(this->ctx) == V8_FT_ADAPTOR/
{
this->done = 1;
APPEND_CHR8('<','<',' ','a','d','a','p','t');
APPEND_CHR8('o','r',' ','>','>','\0','\0','\0');
stringof(this->buf);
}
/*
* Check for other common frame types for which we also have nothing to add.
*/
dtrace:helper:ustack:
/!this->done/
{
this->marker = COPYIN_PTR(this->fp + V8_OFF_FP_CONTEXT);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_ENTRY/
{
this->done = 1;
APPEND_CHR8('<','<',' ','e','n','t','r','y');
APPEND_CHR4(' ','>','>','\0');
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_ENTRYCONSTRUCT/
{
this->done = 1;
APPEND_CHR8('<','<',' ','e','n','t','r','y');
APPEND_CHR8('_','c','o','n','s','t','r','u');
APPEND_CHR4('t',' ','>','>');
APPEND_CHR('\0');
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_EXIT/
{
this->done = 1;
APPEND_CHR8('<','<',' ','e','x','i','t',' ');
APPEND_CHR4('>','>','\0','\0');
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_INTERNAL/
{
this->done = 1;
APPEND_CHR8('<','<',' ','i','n','t','e','r');
APPEND_CHR8('n','a','l',' ','>','>','\0','\0');
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_CONSTRUCT/
{
this->done = 1;
APPEND_CHR8('<','<',' ','c','o','n','s','t');
APPEND_CHR8('r','u','c','t','o','r',' ','>');
APPEND_CHR4('>','\0','\0','\0');
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && IS_SMI(this->marker) &&
SMI_VALUE(this->marker) == V8_FT_STUB/
{
this->done = 1;
APPEND_CHR8('<','<',' ','s','t','u','b',' ');
APPEND_CHR4('>','>','\0','\0');
stringof(this->buf);
}
/*
* Now check for internal frames that we can only identify by seeing that
* there's a Code object where there would be a JSFunction object for a
* JavaScriptFrame.
*/
dtrace:helper:ustack:
/!this->done/
{
this->func = COPYIN_PTR(this->fp + V8_OFF_FP_FUNC);
this->map = V8_MAP_PTR(COPYIN_PTR(this->func + V8_OFF_HEAPOBJ_MAP));
this->attrs = COPYIN_UINT8(this->map + V8_OFF_MAP_ATTRS);
}
dtrace:helper:ustack:
/!this->done && this->attrs == V8_IT_CODE/
{
this->done = 1;
APPEND_CHR8('<','<',' ','i','n','t','e','r');
APPEND_CHR8('n','a','l',' ','c','o','d','e');
APPEND_CHR4(' ','>','>','\0');
stringof(this->buf);
}
/*
* At this point, we're either looking at a JavaScriptFrame or an
* OptimizedFrame. For now, we assume JavaScript and start by grabbing the
* function name.
*/
dtrace:helper:ustack:
/!this->done/
{
this->map = 0;
this->attrs = 0;
this->shared = COPYIN_PTR(this->func + V8_OFF_FUNC_SHARED);
this->funcrawnamestr = COPYIN_PTR(this->shared + V8_OFF_RAW_NAME);
this->hassharedname = this->funcrawnamestr !=
NO_SHARED_FUNCTION_NAME_SENTINEL;
}
dtrace:helper:ustack:
/!this->done && this->hassharedname/
{
LOAD_STRFIELDS(this->funcrawnamestr, this->funcnamelen,
this->funcnameattrs);
}
dtrace:helper:ustack:
/!this->done && this->funcnamelen == 0/
{
/*
* This is an anonymous function, but if it was invoked as a method of
* some object then V8 will have computed an inferred name that we can
* include in the stack trace.
*/
APPEND_CHR8('(','a','n','o','n',')',' ','a');
APPEND_CHR('s');
APPEND_CHR(' ');
this->funcrawnamestr = COPYIN_PTR(this->shared + V8_OFF_SHARED_IDENT);
LOAD_STRFIELDS(this->funcrawnamestr, this->funcnamelen,
this->funcnameattrs);
}
dtrace:helper:ustack:
/!this->done && this->funcnamelen == 0/
{
APPEND_CHR('(');
APPEND_CHR4('a','n','o','n');
APPEND_CHR(')');
}
APPEND_V8STR(this->funcrawnamestr, this->funcnamelen, this->funcnameattrs)
/*
* Now look for the name of the script where the function was defined. The
* "script" itself may be undefined for special functions like "RegExp".
*/
dtrace:helper:ustack:
/!this->done/
{
this->script = COPYIN_PTR(this->shared + V8_OFF_SHARED_SCRIPT);
this->map = V8_MAP_PTR(COPYIN_PTR(this->script + V8_OFF_HEAPOBJ_MAP));
this->scriptattrs = COPYIN_UINT8(this->map + V8_OFF_MAP_ATTRS);
}
dtrace:helper:ustack:
/!this->done && !V8_TYPE_SCRIPT(this->scriptattrs)/
{
APPEND_CHR('\0');
this->done = 1;
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done/
{
this->scriptnamestr = COPYIN_PTR(this->script + V8_OFF_SCRIPT_NAME);
LOAD_STRFIELDS(this->scriptnamestr, this->scriptnamelen,
this->scriptnameattrs);
}
dtrace:helper:ustack:
/!this->done && this->scriptnamelen != 0/
{
APPEND_CHR4(' ','a','t',' ');
}
APPEND_V8STR(this->scriptnamestr, this->scriptnamelen, this->scriptnameattrs)
/*
* Now look for file position and line number information.
*/
dtrace:helper:ustack:
/!this->done/
{
this->position = COPYIN_UINT32(this->shared + V8_OFF_SHARED_FUNIDENT);
this->line_ends = COPYIN_PTR(this->script + V8_OFF_SCRIPT_LENDS);
this->map = V8_MAP_PTR(COPYIN_PTR(this->line_ends + V8_OFF_HEAPOBJ_MAP));
this->le_attrs = COPYIN_UINT8(this->map + V8_OFF_MAP_ATTRS);
}
dtrace:helper:ustack:
/!this->done && this->le_attrs != V8_IT_FIXEDARRAY && this->position == 0/
{
APPEND_CHR('\0');
this->done = 1;
stringof(this->buf);
}
dtrace:helper:ustack:
/!this->done && this->le_attrs != V8_IT_FIXEDARRAY/
{
/*
* If the line number array was not a valid FixedArray, it's probably
* undefined because V8 has not had to compute it yet. In this case we
* just show the raw position and call it a day.
*/
APPEND_CHR4(' ','p','o','s');
APPEND_CHR(' ');
APPEND_NUM(SMI_VALUE(this->position));
APPEND_CHR('\0');
this->done = 1;
stringof(this->buf);
}
/*
* At this point, we've got both a position in the script and an array
* describing where each line of the file ends. We can use this to compute the
* line number by binary searching the array. (This is also what V8 does when
* computing stack traces.)
*/
dtrace:helper:ustack:
/!this->done/
{
/* initialize binary search */
this->bsearch_line = this->position <
SMI_VALUE(COPYIN_PTR(this->line_ends + V8_OFF_FA_DATA)) ? 1 : 0;
this->bsearch_min = 0;
this->bsearch_max = this->bsearch_line != 0 ? 0 :
SMI_VALUE(COPYIN_PTR(this->line_ends + V8_OFF_FA_SIZE)) - 1;
}
/*
* Of course, we can't iterate the binary search indefinitely, so we hardcode 15
* iterations. That's enough to precisely identify the line number in files up
* to 32768 lines of code.
*/
#define BSEARCH_LOOP \
dtrace:helper:ustack: \
/!this->done && this->bsearch_max >= 1/ \
{ \
this->ii = (this->bsearch_min + this->bsearch_max) >> 1; \
} \
\
dtrace:helper:ustack: \
/!this->done && this->bsearch_max >= 1 && \
this->position > SMI_VALUE( \
COPYIN_PTR(this->line_ends + V8_OFF_FA_DATA + \
this->ii * sizeof (uint32_t)))/ \
{ \
this->bsearch_min = this->ii + 1; \
} \
\
dtrace:helper:ustack: \
/!this->done && this->bsearch_max >= 1 && \
this->position <= SMI_VALUE( \
COPYIN_PTR(this->line_ends + V8_OFF_FA_DATA + \
(this->ii - 1) * sizeof (uint32_t)))/ \
{ \
this->bsearch_max = this->ii - 1; \
}
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
BSEARCH_LOOP
dtrace:helper:ustack:
/!this->done && !this->bsearch_line/
{
this->bsearch_line = this->ii + 1;
}
dtrace:helper:ustack:
/!this->done/
{
APPEND_CHR(' ');
APPEND_CHR4('l','i','n','e');
APPEND_CHR(' ');
APPEND_NUM(this->bsearch_line);
APPEND_CHR('\0');
this->done = 1;
stringof(this->buf);
}
/* vim: set tabstop=8 softtabstop=8 shiftwidth=8 noexpandtab: */
|