Linux ip-172-26-7-228 5.4.0-1103-aws #111~18.04.1-Ubuntu SMP Tue May 23 20:04:10 UTC 2023 x86_64
Your IP : 3.15.142.42
Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 269
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.23)
Description: GCC Quad-Precision Math Library
A library, which provides quad-precision mathematical functions on targets
supporting the __float128 datatype. The library is used to provide on such
targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-modules-5.4.0-1075-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69691
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1075.80~18.04.1
Config-Version: 5.4.0-1075.80~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 252
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-apt
Version: 1.6.5ubuntu0.5
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
The apt_pkg Python interface will provide full access to the internal
libapt-pkg structures allowing Python programs to easily perform a
variety of functions.
.
This package contains locales.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: zerofree
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.4-1
Depends: e2fslibs (>= 1.37), libc6 (>= 2.4)
Description: zero free blocks from ext2, ext3 and ext4 file-systems
Zerofree finds the unallocated blocks with non-zero value content in
an ext2, ext3 or ext4 file-system and fills them with zeroes
(zerofree can also work with another value than zero). This is mostly
useful if the device on which this file-system resides is a disk
image. In this case, depending on the type of disk image, a secondary
utility may be able to reduce the size of the disk image after
zerofree has been run. Zerofree requires the file-system to be
unmounted or mounted read-only.
.
The usual way to achieve the same result (zeroing the unused
blocks) is to run "dd" to create a file full of zeroes that takes up
the entire free space on the drive, and then delete this file. This
has many disadvantages, which zerofree alleviates:
* it is slow;
* it makes the disk image (temporarily) grow to its maximal extent;
* it (temporarily) uses all free space on the disk, so other
concurrent write actions may fail.
.
Zerofree has been written to be run from GNU/Linux systems installed
as guest OSes inside a virtual machine. If this is not your case, you
almost certainly don't need this package. (One other use case would
be to erase sensitive data a little bit more securely than with a
simple "rm").
Original-Maintainer: Thibaut Paumard <thibaut@debian.org>
Homepage: https://frippery.org/uml/
Package: node-lockfile
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.4.1-1
Depends: nodejs
Description: Asynchronous file lock module for Node.js
This module provides asynchronous and synchronous concurrent file
locking. It supports timeouts, expirations, and retrying upon failure.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/lockfile
Package: linux-modules-5.4.0-1047-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69396
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1047.49~18.04.1
Config-Version: 5.4.0-1047.49~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.3.0-1032-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64641
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1032.34~18.04.2
Config-Version: 5.3.0-1032.34~18.04.2
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libgs9-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7319
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 9.26~dfsg+0-0ubuntu0.18.04.18
Recommends: fonts-droid-fallback
Description: interpreter for the PostScript language and for PDF - common files
GPL Ghostscript is used for PostScript/PDF preview and printing.
Usually as a back-end to a program such as ghostview, it can display
PostScript and PDF documents in an X11 environment.
.
This package provides common architecture-independent files needed by
the GPL Ghostscript library.
.
By default, GPL Ghostscript uses a font from the fonts-droid package to
approximate glyphs in PDFs for which the requested CJK TrueType font
is missing. If the fonts-droid package is not installed, these glyphs
will be rendered as bullets.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.5-3
Depends: libc6 (>= 2.17)
Description: replacement for GNU Pth using system threads
nPth is a non-preemptive threads implementation using an API very
similar to the one known from GNU Pth. It has been designed as a
replacement of GNU Pth for non-ancient operating systems. In
contrast to GNU Pth it is based on the system's standard threads
implementation. Thus nPth allows the use of libraries which are not
compatible to GNU Pth.
Original-Maintainer: Eric Dorland <eric@debian.org>
Homepage: https://www.gnupg.org/
Package: chrpath
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.16-2
Depends: libc6 (>= 2.14)
Description: Tool to edit the rpath in ELF binaries
chrpath allows you to change the rpath (where the application looks
for libraries) in an application. It does not (yet) allow you to
add an rpath if there isn't one already.
Original-Maintainer: Tollef Fog Heen <tfheen@debian.org>
Homepage: https://alioth.debian.org/projects/chrpath/
Package: node-brace-expansion
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1.8-1
Depends: nodejs, node-balanced-match (>= 0.2.0), node-concat-map (>= 0.0.1)
Description: Brace expansion as known from sh/bash for Node.js
node-brace-expansion provides brace expansion as known from sh/bash for
Node.js. It provides the expand() method to return an array of all possible
and valid expansions of the string argument. If none are found, the string
is returned as the only item in the array.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/juliangruber/brace-expansion
Package: linux-image-5.4.0-1047-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9229
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1047.49~18.04.1
Config-Version: 5.4.0-1047.49~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1047-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1047-aws
Conflicts: linux-image-unsigned-5.4.0-1047-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: fdisk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 427
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Replaces: util-linux (<< 2.30.1-0ubuntu4~)
Depends: libc6 (>= 2.14), libfdisk1 (>= 2.31.1), libmount1 (>= 2.24.2), libncursesw5 (>= 6), libsmartcols1 (>= 2.28~rc1), libtinfo5 (>= 6)
Breaks: util-linux (<< 2.30.1-0ubuntu4~)
Description: collection of partitioning utilities
This package contains the classic fdisk, sfdisk and cfdisk partitioning
utilities from the util-linux suite.
.
The utilities included in this package allow you to partition
your hard disk. The utilities supports both modern and legacy
partition tables (eg. GPT, MBR, etc).
.
The fdisk utility is the classical text-mode utility.
The cfdisk utilitity gives a more userfriendly curses based interface.
The sfdisk utility is mostly for automation and scripting uses.
Important: yes
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Provides: host
Depends: libbind9-160 (= 1:9.11.3+dfsg-1ubuntu1.18), libdns1100 (= 1:9.11.3+dfsg-1ubuntu1.18), libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libisccfg160 (= 1:9.11.3+dfsg-1ubuntu1.18), liblwres160 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4)
Description: DNS lookup utility (deprecated)
This package provides /usr/bin/host, a simple utility (bundled with the
BIND 9.X sources) which can be used for converting domain names to IP
addresses and the reverse.
.
This utility is deprecated, use dig or delv from the dnsutils package.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.20-3
Depends: perl
Description: Data tables pertaining to HTML
HTML-Tagset contains data tables useful in dealing with HTML. For instance,
it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
which cannot have content. It provides no functions or methods.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Tagset
Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: iputils
Version: 3:20161105-1ubuntu2
Provides: ping
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
The ping command sends ICMP ECHO_REQUEST packets to a host in order to
test if the host is reachable via the network.
.
This package includes a ping6 utility which supports IPv6 network
connections.
Original-Maintainer: Noah Meyerhans <noahm@debian.org>
Package: libfontconfig1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2092
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.12.6-0ubuntu2
Provides: libfontconfig-dev
Depends: libfontconfig1 (= 2.12.6-0ubuntu2), libexpat1-dev, libfreetype6-dev (>= 2.1.7), pkg-config
Description: generic font configuration library - development
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the static libraries and headers needed for the
development of applications using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Keith Packard <keithp@debian.org>
Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.7.9-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
libXi provides an X Window System client interface to the XINPUT
extension to the X protocol.
.
The Input extension allows setup and configuration of multiple input devices,
and hotplugging of input devices (to be added and removed on the fly).
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXi
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org/
Package: ubuntu-advantage-tools
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 17
Conffiles:
/etc/cron.daily/ubuntu-advantage-tools 36de53e7c2d968f951b11c64be101b91
/etc/update-motd.d/80-esm 6ffbbf00021b4ea4255cff378c99c898
/etc/update-motd.d/80-livepatch 1a3172ffaa815d12b58648f117ffb67e
Description: management tools for Ubuntu Advantage
Ubuntu Advantage is the professional package of tooling, technology
and expertise from Canonical, helping organisations around the world
manage their Ubuntu deployments.
.
Subscribers to Ubuntu Advantage will find helpful tools for accessing
services in this package.
Homepage: https://buy.ubuntu.com
Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 234
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20170329-1
Depends: libc6 (>= 2.17), libtinfo5 (>= 6)
Description: BSD editline and history libraries
Command line editor library provides generic line editing,
history, and tokenization functions.
.
It slightly resembles GNU readline.
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Homepage: http://www.thrysoee.dk/editline/
Package: graphviz
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 3004
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.40.1-2
Depends: libann0, libc6 (>= 2.15), libcdt5, libcgraph6, libexpat1 (>= 2.0.1), libgcc1 (>= 1:3.0), libgd3 (>= 2.1.0~alpha~), libglib2.0-0 (>= 2.16.0), libgts-0.7-5 (>= 0.7.6), libgvc6, libgvpr2, liblab-gamut1, libstdc++6 (>= 5), libx11-6, libxaw7, libxmu6, libxt6
Recommends: fonts-liberation
Suggests: gsfonts, graphviz-doc
Conflicts: gdtclft
Description: rich set of graph drawing tools
Graph drawing addresses the problem of visualizing structural information
by constructing geometric representations of abstract graphs and networks.
Automatic generation of graph drawings has important applications in key
technologies such as database design, software engineering, VLSI and
network design and visual interfaces in other domains. Situations where
these tools might be particularly useful include:
.
* you would like to restructure a program and first need to understand
the relationships between its types, procedures, and source files
* you need to find the bottlenecks in an Internet backbone - not only
individual links, but their relationships
* you're debugging a protocol or microarchitecture represented as a
finite state machine and need to figure out how a certain
error state arises
* you would like to browse a database schema, knowledge base, or
distributed program represented graphically
* you would like to see an overview of a collection of linked documents
* you would like to discover patterns and communities of interest in a
database of telephone calls or e-mail messages
.
This package contains the command-line tools.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: linux-image-5.4.0-1075-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10315
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1075.80~18.04.1
Config-Version: 5.4.0-1075.80~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1075-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1075-aws
Conflicts: linux-image-unsigned-5.4.0-1075-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1075.80~18.04.1)
Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1487
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cryptography
Version: 2.1.4-1ubuntu1.4
Depends: python3 (>= 3~), python3-asn1crypto (>= 0.21.0~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3-idna (>= 2.1), python3-six (>= 1.4.1), python3:any (>= 3.4~), libc6 (>= 2.14), libssl1.1 (>= 1.1.1)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Breaks: python3-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 3)
The cryptography library is designed to be a "one-stop-shop" for
all your cryptographic needs in Python.
.
As an alternative to the libraries that came before it, cryptography
tries to address some of the issues with those libraries:
- Lack of PyPy and Python 3 support.
- Lack of maintenance.
- Use of poor implementations of algorithms (i.e. ones with known
side-channel attacks).
- Lack of high level, "Cryptography for humans", APIs.
- Absence of algorithms such as AES-GCM.
- Poor introspectability, and thus poor testability.
- Extremely error prone APIs, and bad defaults.
.
This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>
Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
/etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
/etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
Contains configuration files and directories required for
authentication to work on Debian systems. This package is required
on almost all installations.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: linux-image-5.4.0-1049-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9258
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1049.51~18.04.1
Config-Version: 5.4.0-1049.51~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1049-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1049-aws
Conflicts: linux-image-unsigned-5.4.0-1049-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1279
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vim
Version: 2:8.0.1453-1ubuntu1.13
Provides: editor
Depends: vim-common (= 2:8.0.1453-1ubuntu1.13), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Suggests: indent
Conffiles:
/etc/vim/vimrc.tiny 103fa7ce385b40469f20b73473aa866c
Description: Vi IMproved - enhanced vi editor - compact version
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains a minimal version of Vim compiled with no GUI and
a small subset of features. This package's sole purpose is to provide
the vi binary for base installations.
.
If a vim binary is wanted, try one of the following more featureful
packages: vim, vim-nox, vim-athena, vim-gtk, or vim-gtk3.
Homepage: https://vim.sourceforge.io/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Package: liblist-moreutils-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.416-1build3
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.4), libexporter-tiny-perl
Description: Perl module with additional list functions not found in List::Util
List::MoreUtils provides some trivial but commonly needed functionality on
lists which is not going to go into List::Util.
.
All of the functions are implementable in only a couple of lines of Perl
code. Using the functions from this module however should give slightly better
performance as everything is implemented in C. The pure-Perl implementation of
these functions only serves as a fallback in case the C portions of this module
could not be compiled on this machine.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/List-MoreUtils
Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Depends: libtinfo5 (= 6.1-1ubuntu1.18.04.1), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: python3-requests-toolbelt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 172
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: all
Source: python-requests-toolbelt
Version: 0.8.0-1+ubuntu18.04.1+certbot+1
Depends: python3-requests, python3:any (>= 3.4~)
Description: Utility belt for advanced users of python3-requests
Collection of utilities for python3-requests
It provides transport adapters: FingerprintAdapter, SSLAdapter,
SourceAddressAdapter, SocketOptionsAdapter, TCPKeepAliveAdapter
and authenticators: AuthHandler, GuessAuth, HTTPProxyDigestAuth
Also a cookiejar, streaming helpers and more.
Homepage: https://pypi.python.org/pypi/requests-toolbelt
Package: libsepol1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1738
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.7-1ubuntu0.1
Provides: libsepol-dev
Depends: libsepol1 (= 2.7-1ubuntu0.1)
Conflicts: libsepol-dev
Description: SELinux binary policy manipulation library and development files
libsepol allows programs to easily modify SELinux binary policies. This
means changing the default values for booleans, or reading the policy for
analysis.
.
This package contains the headers and archives used for linking it into your
programs.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.4.6-2
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf (>> 2.50), automaken, gfortran | fortran95-compiler, gcj-jdk
Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4
Description: Generic library support script
This is GNU libtool, a generic library support script. Libtool hides
the complexity of generating special library types (such as shared
libraries) behind a consistent interface. To use libtool, add the
new generic library building commands to your Makefile, Makefile.in,
or Makefile.am. See the documentation for details. Libtool supports
building static libraries on all platforms.
.
Libtool supports generation of C, C++, Fortran and Java libraries.
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>
Homepage: http://www.gnu.org/software/libtool/
Package: libcom-err2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.4
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.44.1-1ubuntu1.4)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
libcomerr is an attempt to present a common error-handling mechanism to
manipulate the most common form of error code in a fashion that does not
have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: node-spdx-expression-parse
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.4-1
Depends: nodejs
Description: parse SPDX license expressions
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/kemitchell/spdx-expression-parse.js#readme
Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 211
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.17)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libkpathsea6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Depends: libc6 (>= 2.4)
Breaks: texlive-base (<< 2014), texlive-binaries (<< 2014)
Description: TeX Live: path search library for TeX (runtime part)
This package contains the runtime part of the Kpathsea[rch] library,
which implements generic path searching, configuration, and
TeX-specific file searching.
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: libnet-domain-tld-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.75-1
Depends: perl
Description: list of currently available Top-level Domains (TLDs)
The purpose of Net::Domain::TLD is to provide the user with a current list of
available top level domain names including new ICANN additions and ccTLDs.
It provides two functions:
.
- tld_exists - returns whether a certain top-level domain exists
- tld - returns various lists of top-level domains
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-Domain-TLD
Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 552
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: jquery
Version: 3.2.1-1
Replaces: jquery
Recommends: javascript-common
Breaks: movabletype-opensource (<< 5.1.4+dfsg-3~)
Conflicts: jquery
Description: JavaScript library for dynamic web applications
jQuery is a fast, concise, JavaScript Library that simplifies how you
traverse HTML documents, handle events, perform animations, and add Ajax
interactions to your web pages. jQuery is designed to change the way
that you write JavaScript.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: http://jquery.com/
Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 188
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lvm2 (2.02.176-4.1ubuntu3)
Version: 2:1.02.145-4.1ubuntu3
Depends: libc6 (>= 2.14), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.141), liblvm2cmd2.02 (>= 2.02.176)
Description: Linux Kernel Device Mapper event daemon
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains a daemon to monitor events of devmapper devices.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.24+nmu5ubuntu1
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
The libpaper paper-handling library automates recognition of many
different paper types and sizes for programs that need to deal with
printed output.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Package: libtexlua52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Depends: libc6 (>= 2.14)
Description: TeX Live: Lua 5.2, modified for use with LuaTeX
The Lua 5.2 library as used within LuaTeX.
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: node-normalize-package-data
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3.5-2
Depends: nodejs, node-hosted-git-info, node-is-builtin-module, node-semver (>= 2), node-validate-npm-package-license
Description: Normalizes package metadata - Node.js module
This module is used by node-read-package-json to normalize data it
reads from a package.json file typically found in Node.js modules,
but in principle it could come from any source.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/meryn/normalize-package-data
Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
library providing __atomic built-in functions. When an atomic call cannot
be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-image-5.4.0-1080-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10319
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1080.87~18.04.1
Config-Version: 5.4.0-1080.87~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1080-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1080-aws
Conflicts: linux-image-unsigned-5.4.0-1080-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1080.87~18.04.1)
Package: libxaw7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 487
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxaw
Version: 2:1.0.13-1
Depends: libc6 (>= 2.15), libx11-6, libxext6, libxmu6, libxpm4, libxt6
Description: X11 Athena Widget library
libXaw7 provides the second version of Xaw, the Athena Widgets toolkit,
which is largely used by legacy X applications. This version is the
most common version, as version 6 is considered deprecated, and version
8, which adds Xprint support, is unsupported and not widely used.
In general, use of a more modern toolkit such as GTK+ is recommended.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXaw
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libapr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.6.3-2
Depends: libc6 (>= 2.15), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Homepage: http://apr.apache.org/
Package: libpython3-stdlib
Status: install ok installed
Priority: important
Section: python
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.6.7-1~18.04
Depends: libpython3.6-stdlib (>= 3.6.7-1~)
Description: interactive high-level object-oriented language (default python3 version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python 3 version (currently v3.6).
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: linux-modules-4.15.0-1063-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 60724
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1063.67
Config-Version: 4.15.0-1063.67
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libwmf-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 800
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libwmf
Version: 0.2.8.4-12
Depends: libwmf0.2-7 (= 0.2.8.4-12), libfreetype6-dev, x11proto-core-dev, libx11-dev, zlib1g-dev
Suggests: libwmf-doc
Description: Windows metafile conversion development
Windows metafile (WMF) is a picture format used by many Windows
programs, e.g. Microsoft Word. libwmf is a library for interpreting
metafile images and either displaying them using X or converting them
to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
.
This package contains the static library and header files.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: python3-s3transfer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-s3transfer
Version: 0.1.13-1
Depends: python3-botocore, python3:any (>= 3.3.2-2~)
Description: Amazon S3 Transfer Manager for Python3
S3transfer is a Python library for managing Amazon S3 transfers.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/boto/s3transfer
Package: linux-modules-5.4.0-1099-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69686
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1099.107~18.04.1
Config-Version: 5.4.0-1099.107~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: liblxc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 752
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 3.0.1-0ubuntu1~18.04.2
Depends: cgroup-lite | systemd, liblxc-common (= 3.0.1-0ubuntu1~18.04.2), rsync, libc6 (>= 2.27), libcap2 (>= 1:2.10), libgnutls30 (>= 3.5.0), libseccomp2 (>= 2.1.0), libselinux1 (>= 1.32)
Recommends: lxcfs, uidmap
Description: Linux Containers userspace tools (library)
Containers are insulated areas inside a system, which have their own namespace
for filesystem, network, PID, IPC, CPU and memory allocation and which can be
created using the Control Group and Namespace features included in the Linux
kernel.
.
This package contains the libraries.
Homepage: https://linuxcontainers.org
Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.176ubuntu2.3)
Version: 4:7.4.0-1ubuntu2.3
Depends: cpp-7 (>= 7.4.0-1~)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: GNU C preprocessor (cpp)
The GNU C preprocessor is a macro processor that is used automatically
by the GNU C compiler to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
.
This is a dependency package providing the default GNU C preprocessor.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-image-5.4.0-1035-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9139
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1035.37~18.04.1
Config-Version: 5.4.0-1035.37~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1035-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1035-aws
Conflicts: linux-image-unsigned-5.4.0-1035-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: imagemagick-6-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 460
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.7.4+dfsg-16ubuntu6.15
Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~)
Provides: imagemagick-common
Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~)
Conffiles:
/etc/ImageMagick-6/coder.xml 184715fdf06bd9fc835dc62929e8d36f
/etc/ImageMagick-6/colors.xml 27d44e4d5e96d3db5a8cf834b44b69a5
/etc/ImageMagick-6/delegates.xml 5a6c13b9a15988fa171e72039396fb6c
/etc/ImageMagick-6/log.xml 63b78f245752f5332d587e8f0917a085
/etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
/etc/ImageMagick-6/mime.xml 7691ca051247d9da165f154a1c41b411
/etc/ImageMagick-6/policy.xml d8a213b5e56725a93d99004d46ac7f70
/etc/ImageMagick-6/quantization-table.xml 0bc6653bd4f56e8a8f108c72c612c8b6
/etc/ImageMagick-6/thresholds.xml 04d4a80687f7073ae81c91907889db42
/etc/ImageMagick-6/type-apple.xml 94406299efa71b566167341c4bfa069a
/etc/ImageMagick-6/type-dejavu.xml 09bd5cf793568d2a5e185d475bc45b96
/etc/ImageMagick-6/type-ghostscript.xml d7fdef0a5e8ff7446600ede4e04f6acf
/etc/ImageMagick-6/type-windows.xml 21d3ea0e2b51ded4e3870d401897a9d8
/etc/ImageMagick-6/type.xml d0caa5ce47ac32e40980d1ee7bf882eb
Description: image manipulation programs -- infrastructure
imagemagick-common contains the filesystem infrastructure required for
further installation of imagemagick in any configuration; it does not provide
a full installation of binaries, libraries, and utilities
required to run imagemagick.
.
This package is independent of channel depth.
Homepage: http://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.6.12ubuntu0.2
Provides: libapt-pkg (= 1.6.12ubuntu0.2)
Depends: libbz2-1.0, libc6 (>= 2.27), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), libsystemd0 (>= 221), libudev1 (>= 183), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.6.12ubuntu0.2)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
This library provides the common functionality for searching and
managing packages as well as information about packages.
Higher-level package managers can depend upon this library.
.
This includes:
* retrieval of information about packages from multiple sources
* retrieval of packages and all dependent packages
needed to satisfy a request either through an internal
solver or by interfacing with an external one
* authenticating the sources and validating the retrieved data
* installation and removal of packages in the system
* providing different transports to retrieve data over cdrom, ftp,
http(s), rsh as well as an interface to add more transports like
tor+http(s) (apt-transport-tor).
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: libaudit1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.8.2-1ubuntu1
Depends: libaudit-common (>= 1:2.8.2-1ubuntu1), libc6 (>= 2.14), libcap-ng0
Description: Dynamic library for security auditing
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: linux-aws-5.4-headers-5.4.0-1097
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71125
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1097.105~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1097/debian.README.gz for details
Package: linux-headers-5.4.0-1101-aws
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 12523
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1101.109~18.04.1
Provides: linux-headers, linux-headers-3.0
Depends: linux-aws-5.4-headers-5.4.0-1101, libc6 (>= 2.14), libelf1 (>= 0.142), libssl1.1 (>= 1.1.0)
Description: Linux kernel headers for version 5.4.0 on 64 bit x86 SMP
This package provides kernel header files for version 5.4.0 on
64 bit x86 SMP.
.
This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-5.4.0-1101/debian.README.gz for details.
Package: php-symfony-debug
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 3.4.6+dfsg-1ubuntu0.1
Depends: php-common, php-psr-log (>= 1.0), php-psr-log (<< 2~~)
Description: tools to make debugging of PHP code easier
The Symfony Debug Component contains various tools to assist
PHP code debugging.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/3.4/components/debug.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-yaml
Status: install ok installed
Priority: important
Section: python
Installed-Size: 459
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pyyaml
Version: 3.12-1build2
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can
parse all examples from the specification. The parsing algorithm is simple
enough to be a reference for YAML parser implementors. A simple extension API
is also provided. The package is built using libyaml for improved speed.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/yaml/pyyaml
Package: libpython3.6-stdlib
Status: install ok installed
Priority: important
Section: python
Installed-Size: 7824
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.6
Version: 3.6.9-1~18.04ubuntu1.12
Replaces: libpython3.6-testsuite (<< 3.6.6-2), python3-distutils (<< 3.6.5-2)
Depends: libpython3.6-minimal (= 3.6.9-1~18.04ubuntu1.12), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libffi6 (>= 3.0.4), liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: libmpdec2 (<< 2.4.2), libpython3.6-testsuite (<< 3.6.6-2), python3-distutils (<< 3.6.5-2), python3-numpy (<< 1:1.12.1-3.1), python3-tk (<< 3.6.4~rc1-2)
Description: Interactive high-level object-oriented language (standard library, version 3.6)
Python is a high-level, interactive, object-oriented language. Its 3.6 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 3.6's standard library. It is normally not
used on its own, but as a dependency of python3.6.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: node-qs
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.2.4-1ubuntu1
Depends: nodejs
Description: Parse, stringify query strings for Node.js
This module can parse or stringify query strings, and supports
nested objects with brackets notation.
Parameters `depth` and `parameterLimit` help prevent abusive
user input.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/hapijs/qs
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libgts-0.7-5
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 416
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gts
Version: 0.7.6+darcs121130-4
Replaces: libgts-0.7-1, libgts-dev (<< 0.7.6+darcs121130-4)
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.16.0)
Recommends: libgts-bin
Description: library to deal with 3D computational surface meshes
The GNU Triangulated Surface Library is intended to provide a simple and
efficient library to scientists dealing with 3D surfaces meshed with
interconnected triangles.
.
This package contains the shared libraries.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://gts.sourceforge.net/
Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4143
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Replaces: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), ncurses-base (<< 5.7+20100313-1), suckless-tools (<< 39)
Breaks: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), suckless-tools (<< 39)
Description: additional terminal type definitions
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains all of the numerous terminal definitions not found in
the ncurses-base package.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: texlive-latex-recommended
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 30517
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-base
Version: 2017.20180305-1
Replaces: texlive-htmlxml (<< 2017), texlive-latex-extra (<< 2017.20171003), texlive-luatex (<< 2017.20171003)
Depends: tex-common (>= 6), texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437), texlive-latex-base (>= 2017.20170628)
Suggests: texlive-latex-recommended-doc, texlive-pstricks
Breaks: texlive-base (<< 2017.20170628), texlive-latex-extra (<< 2017.20171003), texlive-luatex (<< 2017.20171003)
Description: TeX Live: LaTeX recommended packages
A collection of recommended add-on packages for LaTeX which have widespread
use.
.
This package includes the following CTAN packages:
.
anysize -- A simple package to set up document margins
.
beamer -- A LaTeX class for producing presentations and slides
.
booktabs -- Publication quality tables in LaTeX
.
breqn -- Automatic line breaking of displayed equations
.
caption -- Customising captions in floating environments
.
cite -- Improved citation handling in LaTeX
.
cmap -- Make PDF files searchable and copyable
.
crop -- Support for cropmarks
.
ctable -- Flexible typesetting of table and figure floats using key/value
directives
.
eso-pic -- Add picture commands (or backgrounds) to every page
.
euenc -- Unicode font encoding definitions for XeTeX
.
euler -- Use AMS Euler fonts for math
.
etoolbox -- e-TeX tools for LaTeX
.
extsizes -- Extend the standard classes' size options
.
fancybox -- Variants of \fbox and other games with boxes
.
fancyref -- A LaTeX package for fancy cross-referencing
.
fancyvrb -- Sophisticated verbatim text
.
filehook -- Hooks for input files
.
float -- Improved interface for floating objects
.
fontspec -- Advanced font selection in XeLaTeX and LuaLaTeX
.
fp -- Fixed point arithmetic
.
index -- Extended index for LaTeX including multiple indexes
.
jknapltx -- Miscellaneous packages by Joerg Knappen
.
koma-script -- A bundle of versatile classes and packages
.
latexbug -- Bug-classification for LaTeX related bugs
.
l3experimental -- Experimental LaTeX3 concepts
.
l3kernel -- LaTeX3 programming conventions
.
l3packages -- High-level LaTeX3 concepts
.
lineno -- Line numbers on paragraphs
.
listings -- Typeset source code listings using LaTeX
.
lwarp -- Converts LaTeX to HTML
.
mathspec -- Specify arbitrary fonts for mathematics in XeTeX
.
mathtools -- Mathematical tools to use with amsmath
.
mdwtools -- Miscellaneous tools by Mark Wooding
.
memoir -- Typeset fiction, non-fiction and mathematical books
.
metalogo -- Extended TeX logo macros
.
microtype -- Subliminal refinements towards typographical perfection
.
ms -- Various LaTeX packages by Martin Schroder
.
ntgclass -- "European" versions of standard classes
.
parskip -- Layout with zero \parindent, non-zero \parskip
.
pdfpages -- Include PDF documents in LaTeX
.
polyglossia -- An alternative to babel for XeLaTeX and LuaLaTeX
.
powerdot -- A presentation class
.
psfrag -- Replace strings in encapsulated PostScript figures
.
rcs -- Use RCS (revision control system) tags in LaTeX documents
.
sansmath -- Maths in a sans font
.
section -- Modifying section commands in LaTeX
.
seminar -- Make overhead slides
.
sepnum -- Print numbers in a "friendly" format
.
setspace -- Set space between lines
.
subfig -- Figures broken into subfigures
.
textcase -- Case conversion ignoring mathematics, etc
.
thumbpdf -- Thumbnails for pdfTeX and dvips/ps2pdf
.
translator -- Easy translation of strings in LaTeX
.
typehtml -- Typeset HTML directly from LaTeX
.
ucharcat -- Implementation of the (new in 2015) XeTeX \Ucharcat command in
lua, for LuaTeX
.
underscore -- Control the behaviour of "_" in text
.
unicode-math -- Unicode mathematics support for XeTeX and LuaTeX
.
xcolor -- Driver-independent color extensions for LaTeX and pdfLaTeX
.
xkeyval -- Extension of the keyval package
.
xltxtra -- "Extras" for LaTeX users of XeTeX
.
xunicode -- Generate Unicode characters from accented glyphs
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: debhelper
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 11.1.6ubuntu2
Replaces: dh-systemd (<< 1.38), pkg-create-dbgsym
Provides: debhelper-compat (= 9), debhelper-compat (= 10), debhelper-compat (= 11)
Depends: autotools-dev, dh-autoreconf (>= 17~), dh-strip-nondeterminism (>= 0.028~), dpkg (>= 1.19.0.5~), dpkg-dev (>= 1.19.0.5~), file (>= 3.23), libdpkg-perl (>= 1.17.14), man-db, po-debconf, perl
Suggests: dh-make, dwz
Breaks: cmake (<< 3.9~), dh-systemd (<< 1.38), meson (<< 0.40.0~)
Conflicts: pkg-create-dbgsym
Description: helper programs for debian/rules
A collection of programs that can be used in a debian/rules file to
automate common tasks related to building Debian packages. Programs
are included to install various files into your package, compress
files, fix file permissions, integrate your package with the Debian
menu system, debconf, doc-base, etc. Most Debian packages use debhelper
as part of their build process.
Original-Maintainer: Debhelper Maintainers <debhelper@packages.debian.org>
Package: cloud-guest-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 57
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-utils
Version: 0.30-0ubuntu5
Replaces: cloud-utils (<< 0.27-0ubuntu3)
Depends: e2fsprogs (>= 1.4), util-linux (>= 2.17.2), python3:any
Recommends: gdisk | util-linux (>= 2.26.3)
Breaks: cloud-utils (<< 0.27-0ubuntu3)
Description: cloud guest utilities
This package contains programs useful inside cloud instance.
It contains 'growpart' for resizing a partition during boot.
Package: fail2ban
Status: install ok unpacked
Priority: optional
Section: net
Installed-Size: 1698
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.10.2-2
Depends: python3:any (>= 3.3.2-2~), lsb-base (>= 2.0-7)
Recommends: python, iptables | nftables, whois, python3-pyinotify, python3-systemd
Suggests: mailx, system-log-daemon, monit, sqlite3
Conffiles:
/etc/bash_completion.d/fail2ban newconffile
/etc/default/fail2ban newconffile
/etc/fail2ban/action.d/abuseipdb.conf newconffile
/etc/fail2ban/action.d/apf.conf newconffile
/etc/fail2ban/action.d/badips.conf newconffile
/etc/fail2ban/action.d/badips.py newconffile
/etc/fail2ban/action.d/blocklist_de.conf newconffile
/etc/fail2ban/action.d/bsd-ipfw.conf newconffile
/etc/fail2ban/action.d/cloudflare.conf newconffile
/etc/fail2ban/action.d/complain.conf newconffile
/etc/fail2ban/action.d/dshield.conf newconffile
/etc/fail2ban/action.d/dummy.conf newconffile
/etc/fail2ban/action.d/firewallcmd-allports.conf newconffile
/etc/fail2ban/action.d/firewallcmd-common.conf newconffile
/etc/fail2ban/action.d/firewallcmd-ipset.conf newconffile
/etc/fail2ban/action.d/firewallcmd-multiport.conf newconffile
/etc/fail2ban/action.d/firewallcmd-new.conf newconffile
/etc/fail2ban/action.d/firewallcmd-rich-logging.conf newconffile
/etc/fail2ban/action.d/firewallcmd-rich-rules.conf newconffile
/etc/fail2ban/action.d/helpers-common.conf newconffile
/etc/fail2ban/action.d/hostsdeny.conf newconffile
/etc/fail2ban/action.d/ipfilter.conf newconffile
/etc/fail2ban/action.d/ipfw.conf newconffile
/etc/fail2ban/action.d/iptables-allports.conf newconffile
/etc/fail2ban/action.d/iptables-common.conf newconffile
/etc/fail2ban/action.d/iptables-ipset-proto4.conf newconffile
/etc/fail2ban/action.d/iptables-ipset-proto6-allports.conf newconffile
/etc/fail2ban/action.d/iptables-ipset-proto6.conf newconffile
/etc/fail2ban/action.d/iptables-multiport-log.conf newconffile
/etc/fail2ban/action.d/iptables-multiport.conf newconffile
/etc/fail2ban/action.d/iptables-new.conf newconffile
/etc/fail2ban/action.d/iptables-xt_recent-echo.conf newconffile
/etc/fail2ban/action.d/iptables.conf newconffile
/etc/fail2ban/action.d/mail-buffered.conf newconffile
/etc/fail2ban/action.d/mail-whois-common.conf newconffile
/etc/fail2ban/action.d/mail-whois-lines.conf newconffile
/etc/fail2ban/action.d/mail-whois.conf newconffile
/etc/fail2ban/action.d/mail.conf newconffile
/etc/fail2ban/action.d/mynetwatchman.conf newconffile
/etc/fail2ban/action.d/netscaler.conf newconffile
/etc/fail2ban/action.d/nftables-allports.conf newconffile
/etc/fail2ban/action.d/nftables-common.conf newconffile
/etc/fail2ban/action.d/nftables-multiport.conf newconffile
/etc/fail2ban/action.d/nginx-block-map.conf newconffile
/etc/fail2ban/action.d/npf.conf newconffile
/etc/fail2ban/action.d/nsupdate.conf newconffile
/etc/fail2ban/action.d/osx-afctl.conf newconffile
/etc/fail2ban/action.d/osx-ipfw.conf newconffile
/etc/fail2ban/action.d/pf.conf newconffile
/etc/fail2ban/action.d/route.conf newconffile
/etc/fail2ban/action.d/sendmail-buffered.conf newconffile
/etc/fail2ban/action.d/sendmail-common.conf newconffile
/etc/fail2ban/action.d/sendmail-geoip-lines.conf newconffile
/etc/fail2ban/action.d/sendmail-whois-ipjailmatches.conf newconffile
/etc/fail2ban/action.d/sendmail-whois-ipmatches.conf newconffile
/etc/fail2ban/action.d/sendmail-whois-lines.conf newconffile
/etc/fail2ban/action.d/sendmail-whois-matches.conf newconffile
/etc/fail2ban/action.d/sendmail-whois.conf newconffile
/etc/fail2ban/action.d/sendmail.conf newconffile
/etc/fail2ban/action.d/shorewall-ipset-proto6.conf newconffile
/etc/fail2ban/action.d/shorewall.conf newconffile
/etc/fail2ban/action.d/smtp.py newconffile
/etc/fail2ban/action.d/symbiosis-blacklist-allports.conf newconffile
/etc/fail2ban/action.d/ufw.conf newconffile
/etc/fail2ban/action.d/xarf-login-attack.conf newconffile
/etc/fail2ban/fail2ban.conf newconffile
/etc/fail2ban/filter.d/3proxy.conf newconffile
/etc/fail2ban/filter.d/apache-auth.conf newconffile
/etc/fail2ban/filter.d/apache-badbots.conf newconffile
/etc/fail2ban/filter.d/apache-botsearch.conf newconffile
/etc/fail2ban/filter.d/apache-common.conf newconffile
/etc/fail2ban/filter.d/apache-fakegooglebot.conf newconffile
/etc/fail2ban/filter.d/apache-modsecurity.conf newconffile
/etc/fail2ban/filter.d/apache-nohome.conf newconffile
/etc/fail2ban/filter.d/apache-noscript.conf newconffile
/etc/fail2ban/filter.d/apache-overflows.conf newconffile
/etc/fail2ban/filter.d/apache-pass.conf newconffile
/etc/fail2ban/filter.d/apache-shellshock.conf newconffile
/etc/fail2ban/filter.d/assp.conf newconffile
/etc/fail2ban/filter.d/asterisk.conf newconffile
/etc/fail2ban/filter.d/botsearch-common.conf newconffile
/etc/fail2ban/filter.d/common.conf newconffile
/etc/fail2ban/filter.d/counter-strike.conf newconffile
/etc/fail2ban/filter.d/courier-auth.conf newconffile
/etc/fail2ban/filter.d/courier-smtp.conf newconffile
/etc/fail2ban/filter.d/cyrus-imap.conf newconffile
/etc/fail2ban/filter.d/directadmin.conf newconffile
/etc/fail2ban/filter.d/domino-smtp.conf newconffile
/etc/fail2ban/filter.d/dovecot.conf newconffile
/etc/fail2ban/filter.d/dropbear.conf newconffile
/etc/fail2ban/filter.d/drupal-auth.conf newconffile
/etc/fail2ban/filter.d/ejabberd-auth.conf newconffile
/etc/fail2ban/filter.d/exim-common.conf newconffile
/etc/fail2ban/filter.d/exim-spam.conf newconffile
/etc/fail2ban/filter.d/exim.conf newconffile
/etc/fail2ban/filter.d/freeswitch.conf newconffile
/etc/fail2ban/filter.d/froxlor-auth.conf newconffile
/etc/fail2ban/filter.d/groupoffice.conf newconffile
/etc/fail2ban/filter.d/gssftpd.conf newconffile
/etc/fail2ban/filter.d/guacamole.conf newconffile
/etc/fail2ban/filter.d/haproxy-http-auth.conf newconffile
/etc/fail2ban/filter.d/horde.conf newconffile
/etc/fail2ban/filter.d/ignorecommands/apache-fakegooglebot newconffile
/etc/fail2ban/filter.d/kerio.conf newconffile
/etc/fail2ban/filter.d/lighttpd-auth.conf newconffile
/etc/fail2ban/filter.d/mongodb-auth.conf newconffile
/etc/fail2ban/filter.d/monit.conf newconffile
/etc/fail2ban/filter.d/murmur.conf newconffile
/etc/fail2ban/filter.d/mysqld-auth.conf newconffile
/etc/fail2ban/filter.d/nagios.conf newconffile
/etc/fail2ban/filter.d/named-refused.conf newconffile
/etc/fail2ban/filter.d/nginx-botsearch.conf newconffile
/etc/fail2ban/filter.d/nginx-http-auth.conf newconffile
/etc/fail2ban/filter.d/nginx-limit-req.conf newconffile
/etc/fail2ban/filter.d/nsd.conf newconffile
/etc/fail2ban/filter.d/openhab.conf newconffile
/etc/fail2ban/filter.d/openwebmail.conf newconffile
/etc/fail2ban/filter.d/oracleims.conf newconffile
/etc/fail2ban/filter.d/pam-generic.conf newconffile
/etc/fail2ban/filter.d/perdition.conf newconffile
/etc/fail2ban/filter.d/php-url-fopen.conf newconffile
/etc/fail2ban/filter.d/phpmyadmin-syslog.conf newconffile
/etc/fail2ban/filter.d/portsentry.conf newconffile
/etc/fail2ban/filter.d/postfix.conf newconffile
/etc/fail2ban/filter.d/proftpd.conf newconffile
/etc/fail2ban/filter.d/pure-ftpd.conf newconffile
/etc/fail2ban/filter.d/qmail.conf newconffile
/etc/fail2ban/filter.d/recidive.conf newconffile
/etc/fail2ban/filter.d/roundcube-auth.conf newconffile
/etc/fail2ban/filter.d/screensharingd.conf newconffile
/etc/fail2ban/filter.d/selinux-common.conf newconffile
/etc/fail2ban/filter.d/selinux-ssh.conf newconffile
/etc/fail2ban/filter.d/sendmail-auth.conf newconffile
/etc/fail2ban/filter.d/sendmail-reject.conf newconffile
/etc/fail2ban/filter.d/sieve.conf newconffile
/etc/fail2ban/filter.d/slapd.conf newconffile
/etc/fail2ban/filter.d/sogo-auth.conf newconffile
/etc/fail2ban/filter.d/solid-pop3d.conf newconffile
/etc/fail2ban/filter.d/squid.conf newconffile
/etc/fail2ban/filter.d/squirrelmail.conf newconffile
/etc/fail2ban/filter.d/sshd.conf newconffile
/etc/fail2ban/filter.d/stunnel.conf newconffile
/etc/fail2ban/filter.d/suhosin.conf newconffile
/etc/fail2ban/filter.d/tine20.conf newconffile
/etc/fail2ban/filter.d/uwimap-auth.conf newconffile
/etc/fail2ban/filter.d/vsftpd.conf newconffile
/etc/fail2ban/filter.d/webmin-auth.conf newconffile
/etc/fail2ban/filter.d/wuftpd.conf newconffile
/etc/fail2ban/filter.d/xinetd-fail.conf newconffile
/etc/fail2ban/filter.d/zoneminder.conf newconffile
/etc/fail2ban/jail.conf newconffile
/etc/fail2ban/jail.d/defaults-debian.conf newconffile
/etc/fail2ban/paths-arch.conf newconffile
/etc/fail2ban/paths-common.conf newconffile
/etc/fail2ban/paths-debian.conf newconffile
/etc/fail2ban/paths-opensuse.conf newconffile
/etc/init.d/fail2ban newconffile
/etc/logrotate.d/fail2ban newconffile
/etc/monit/monitrc.d/fail2ban newconffile
Description: ban hosts that cause multiple authentication errors
Fail2ban monitors log files (e.g. /var/log/auth.log,
/var/log/apache/access.log) and temporarily or persistently bans
failure-prone addresses by updating existing firewall rules. Fail2ban
allows easy specification of different actions to be taken such as to ban
an IP using iptables or hostsdeny rules, or simply to send a notification
email.
.
By default, it comes with filter expressions for various services
(sshd, apache, qmail, proftpd, sasl etc.) but configuration can be
easily extended for monitoring any other text file. All filters and
actions are given in the config files, thus fail2ban can be adopted
to be used with a variety of files and firewalls. Following recommends
are listed:
.
- iptables/nftables -- default installation uses iptables for banning.
nftables is also suported. You most probably need it
- whois -- used by a number of *mail-whois* actions to send notification
emails with whois information about attacker hosts. Unless you will use
those you don't need whois
- python3-pyinotify -- unless you monitor services logs via systemd, you
need pyinotify for efficient monitoring for log files changes
Original-Maintainer: Yaroslav Halchenko <debian@onerussian.com>
Homepage: http://www.fail2ban.org
Package: tree
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 103
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7.0-5
Depends: libc6 (>= 2.14)
Description: displays an indented directory tree, in color
Tree is a recursive directory listing command that produces a depth indented
listing of files, which is colorized ala dircolors if the LS_COLORS environment
variable is set and output is to tty.
Original-Maintainer: Florian Ernst <florian@debian.org>
Homepage: http://mama.indstate.edu/users/ice/tree/
Package: nodejs-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 5861
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: nodejs
Version: 8.10.0~dfsg-2ubuntu0.4
Replaces: nodejs (<< 6.11.2~dfsg-3)
Recommends: nodejs
Conflicts: nodejs (<< 6.11.2~dfsg-3)
Description: API documentation for Node.js, the javascript platform
Node.js is a platform built on Chrome's JavaScript runtime for easily
building fast, scalable network applications. Node.js uses an
event-driven, non-blocking I/O model that makes it lightweight and
efficient, perfect for data-intensive real-time applications that run
across distributed devices.
.
Node.js is bundled with several useful libraries to handle server
tasks:
.
System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
.
This package contains API documentation for nodejs.
Homepage: http://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1078-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69719
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1078.84~18.04.1
Config-Version: 5.4.0-1078.84~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-aws-5.4-headers-5.4.0-1101
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71142
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1101.109~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1101/debian.README.gz for details
Package: console-setup
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 446
Maintainer: Ubuntu Installer Team <ubuntu-installer@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.178ubuntu2.7
Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.178ubuntu2.7)
Pre-Depends: debconf (>= 1.5.34)
Suggests: lsb-base (>= 3.0-6), locales
Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6)
Conflicts: console-setup-mini
Description: console font and keymap setup program
This package provides the console with the same keyboard
configuration scheme as the X Window System. As a result, there is no
need to duplicate or change the keyboard files just to make simple
customizations such as the use of dead keys, the key functioning as
AltGr or Compose key, the key(s) to switch between Latin and
non-Latin mode, etc.
.
The package also installs console fonts supporting many of the
world's languages. It provides an unified set of font faces - the
classic VGA, the simplistic Fixed, and the cleaned Terminus,
TerminusBold and TerminusBoldVGA.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1307
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.15.10-2ubuntu0.1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.7.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~)
Description: Cairo 2D vector graphics library
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends. Paths consist
of line segments and cubic splines and can be rendered at any width
with various join and cap styles. All colors may be specified with
optional translucence (opacity/alpha) and combined using the
extended Porter/Duff compositing algebra as found in the X Render
Extension.
.
Cairo exports a stateful rendering API similar in spirit to the path
construction, text, and painting operators of PostScript, (with the
significant addition of translucence in the imaging model). When
complete, the API is intended to support the complete imaging model of
PDF 1.4.
.
This package contains the shared libraries.
Homepage: https://cairographics.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libisc169
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libc6 (>= 2.25), libjson-c3 (>= 0.10), libssl1.1 (>= 1.1.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Description: ISC Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisc shared library used by BIND's daemons and
clients.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: linux-image-4.15.0-1065-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 8277
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1065.69
Config-Version: 4.15.0-1065.69
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-4.15.0-1065-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-doc-4.15.0 | linux-aws-source-4.15.0, linux-aws-tools, linux-headers-4.15.0-1065-aws
Description: Linux kernel image for version 4.15.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 4.15.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 497
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libapt-inst2.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 473
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.6.12ubuntu0.2
Provides: libapt-inst (= 1.6.12ubuntu0.2)
Depends: libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: deb package format runtime library
This library provides methods to query and extract information
from deb packages. This includes the control data and the package
file content.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: libtool-bin
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 386
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libtool
Version: 2.4.6-2
Replaces: libtool (<< 2.4.2-1.8~)
Depends: libtool (>= 2.4.6-2)
Description: Generic library support script (libtool binary)
This is GNU libtool, a generic library support script. Libtool hides
the complexity of generating special library types (such as shared
libraries) behind a consistent interface. To use libtool, add the
new generic library building commands to your Makefile, Makefile.in,
or Makefile.am. See the documentation for details. Libtool supports
building static libraries on all platforms.
.
Libtool supports generation of C, C++, Fortran and Java libraries.
.
This package contains the libtool binary only.
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>
Homepage: http://www.gnu.org/software/libtool/
Package: linux-image-5.4.0-1060-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9344
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1060.63~18.04.1
Config-Version: 5.4.0-1060.63~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1060-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1060-aws
Conflicts: linux-image-unsigned-5.4.0-1060-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libtiff-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: tiff
Version: 4.0.9-5ubuntu0.10
Depends: libtiff5-dev (>= 4.0.9-1)
Recommends: pkg-config
Description: Tag Image File Format library (TIFF), development files, current version
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
.
This transitional package should be used in Build-Depends to ease the change.
Homepage: http://libtiff.maptools.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 553
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.12.6-0ubuntu2
Provides: libfontconfig
Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.2.1), fontconfig-config (>= 2.12.6-0ubuntu2)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the runtime library needed to launch applications
using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Keith Packard <keithp@debian.org>
Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1471
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.15-1
Suggests: man-browser
Breaks: manpages-dev (<< 4.13-3)
Description: Manual pages about using a GNU/Linux system
This package contains GNU/Linux manual pages for these sections:
4 = Devices (e.g. hd, sd).
5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
.
Sections 1, 6 and 8 are provided by the respective applications. This
package only includes the intro man page describing the section.
.
The man pages describe syntaxes of several system files.
Original-Maintainer: Martin Schulze <joey@debian.org>
Homepage: https://www.kernel.org/doc/man-pages/
Package: libnss-systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 370
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.57
Depends: libc6 (>= 2.25), systemd (= 237-3ubuntu10.57)
Description: nss module providing dynamic user and group name resolution
nss-systemd is a plug-in module for the GNU Name Service Switch (NSS)
functionality of the GNU C Library (glibc), providing UNIX user and group name
resolution for dynamic users and groups allocated through the DynamicUser=
option in systemd unit files. See systemd.exec(5) for details on this
option.
.
Installing this package automatically adds the module to /etc/nsswitch.conf.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: python3-incremental
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: incremental
Version: 16.10.1-3
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-click, python3-twisted
Description: Library for versioning Python projects.
Incremental is a small library that versions your Python projects.
.
This package provides the Python 3.x module.
Original-Maintainer: Free Ekanayaka <freee@debian.org>
Homepage: https://github.com/hawkowl/incremental
Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7831
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.26.1-6ubuntu0.7
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.38), libscalar-list-utils-perl (<< 1:1.46.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.27), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.26.0, perlapi-5.26.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), debconf (<< 1.5.61), dh-haskell (<< 0.3), intltool (<< 0.51.0-4), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6700), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.38), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.46.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.27), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.26.1~), perl-modules (<< 5.26.1~), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
Perl is a scripting language used in many system scripts and utilities.
.
This package provides a Perl interpreter and the small subset of the
standard run-time library required to perform basic tasks. For a full
Perl installation, install "perl" (and its dependencies, "perl-modules-5.26"
and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libudev1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.57
Depends: libc6 (>= 2.25)
Description: libudev shared library
This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1408
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.21-1ubuntu1
Depends: libc6 (>= 2.15), libunwind8
Description: System call tracer
strace is a system call tracer, i.e. a debugging tool which prints out
a trace of all the system calls made by a another process/program.
The program to be traced need not be recompiled for this, so you can
use it on binaries for which you don't have source.
.
System calls and signals are events that happen at the user/kernel
interface. A close examination of this boundary is very useful for bug
isolation, sanity checking and attempting to capture race conditions.
Homepage: https://strace.io
Original-Maintainer: Steve McIntyre <93sam@debian.org>
Package: linux-aws-5.4-headers-5.4.0-1060
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 70933
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1060.63~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1060/debian.README.gz for details
Package: libunistring2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1569
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 0.9.9-0ubuntu1
Depends: libc6 (>= 2.14)
Description: Unicode string library for C
The 'libunistring' library implements Unicode strings (in the UTF-8,
UTF-16, and UTF-32 encodings), together with functions for Unicode
characters (character names, classifications, properties) and
functions for string processing (formatted output, width, word
breaks, line breaks, normalization, case folding, regular
expressions).
.
This package contains the shared library.
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: http://www.gnu.org/software/libunistring/
Package: libnettle6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 376
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.4.1-0ubuntu0.18.04.1
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the symmetric and one-way cryptographic
algorithms. To avoid having this package depend on libgmp, the
asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Package: texlive-extra-utils
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 25433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-extra
Version: 2017.20180305-2
Depends: tex-common (>= 6), libunicode-linebreak-perl, python, texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437), texlive-latex-base (>= 2017.20170628)
Recommends: ghostscript, libfile-homedir-perl, libyaml-tiny-perl, ruby | ruby-interpreter, texlive-latex-recommended
Suggests: chktex, dvidvi, dvipng, fragmaster, lacheck, latexdiff, latexmk, purifyeps, xindy
Breaks: texlive-base (<< 2017.20170628)
Description: TeX Live: TeX auxiliary programs
Various useful, but non-essential, support programs. Includes programs and
macros for DVI file manipulation, literate programming, patgen, and the TeX
Works Editor.
.
This package includes the following CTAN packages:
.
a2ping -- Advanced PS, PDF, EPS converter
.
adhocfilelist -- '\listfiles' entries from the command line
.
arara -- Automation of LaTeX compilation
.
bibtex8 -- A fully 8-bit adaptation of BibTeX 0.99
.
bibtexu -- BibTeX variant supporting Unicode (UTF-8)
.
bundledoc -- Bundle together all the files needed to build a LaTeX document
.
checklistings -- Pass verbatim contents through a compiler and reincorporate
the resulting output
.
ctan-o-mat -- Upload or validate a package for CTAN
.
ctan_chk -- CTAN guidelines verifier and corrector for uploading projects
.
ctanify -- Prepare a package for upload to CTAN
.
ctanupload -- Support for users uploading to CTAN
.
ctie -- C version of tie (merging Web change files)
.
cweb -- A Web system in C
.
de-macro -- Expand private macros in a document
.
detex -- Strip TeX from a source file
.
dtl -- Tools to dis-assemble and re-assemble DVI files
.
dtxgen -- Creates a template for a self-extracting .dtx file
.
dvi2tty -- Produce ASCII from DVI
.
dviasm -- A utility for editing DVI files
.
dvicopy -- Copy DVI files, flattening VFs
.
dviinfox -- Perl script to print DVI meta information
.
dviljk -- DVI to Laserjet output
.
dvipos -- support DVI pos: specials used by ConTeXt DVI output
.
dvisvgm -- Convert DVI files to Scalable Vector Graphics format (SVG)
.
findhyph -- Find hyphenated words in a document
.
hook-pre-commit-pkg -- Pre-commit git hook for LaTeX package developpers
.
hyphenex -- US English hyphenation exceptions file
.
installfont -- A bash script for installing a LaTeX font family
.
latex-git-log -- Typeset git log information
.
latex-papersize -- Calculate LaTeX settings for any font and paper size
.
latex2man -- Translate LaTeX-based manual pages into Unix man format
.
latex2nemeth -- Convert LaTeX source to Braille with math in Nemeth
.
latexfileversion -- Prints the version and date of a LaTeX class or style
file
.
latexpand -- Expand \input and \include in a LaTeX document
.
latexindent -- Indent a LaTeX document, highlighting the programming
structure
.
ltxfileinfo -- Print version information for a LaTeX file
.
ltximg -- Split LaTeX files to sanitise a conversion process
.
listings-ext -- Automated input of source
.
make4ht -- A build system for tex4ht
.
match_parens -- Find mismatches of parentheses, braces, (angle) brackets, in
texts
.
mflua -- configuration and base files for MFLua
.
mkjobtexmf -- Generate a texmf tree for a particular job
.
patgen -- Generate hyphenation patterns
.
pdfbook2 -- Create booklets from PDF files
.
pdfcrop -- Crop PDF graphics
.
pdfjam -- Shell scripts interfacing to pdfpages
.
pdflatexpicscale -- Support software for downscaling graphics to be included
by pdfLaTeX
.
pdftools -- PDF-related utilities, including PostScript-to-PDF conversion
.
pdfxup -- Create n-up PDF pages with minimal margins
.
pfarrei -- LaTeX support of pastors' and priests' work
.
pkfix -- Replace pk fonts in PostScript with Type 1 fonts
.
pkfix-helper -- Make PostScript files accessible to pkfix
.
pythontex -- Run Python from within a document, typesetting the results
.
seetexk -- Utilities for manipulating DVI files
.
srcredact -- A tool for redacting sources
.
sty2dtx -- Create a .dtx file from a .sty file
.
synctex -- engine-level feature synchronizing output and source
.
tex4ebook -- Convertor from LaTeX to ebook formats
.
texcount -- Count words in a LaTeX document
.
texdef -- Display the definitions of TeX commands
.
texdiff -- Compare documents and produce tagged merge
.
texdirflatten -- Collect files related to a LaTeX job in a single directory
.
texfot -- Filter clutter from the output of a TeX run
.
texliveonfly -- On-the-fly download of missing TeX live packages
.
texloganalyser -- Analyse TeX logs
.
texosquery -- Cross-platform Java application to query OS information
.
texware -- Utility programs for use with TeX
.
tie -- Allow multiple web change files
.
tpic2pdftex -- Use tpic commands in pdfTeX
.
typeoutfileinfo -- Display class/package/file information
.
web -- The original literate programming system
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: libxinerama1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxinerama
Version: 2:1.1.3-1
Depends: libc6 (>= 2.2.5), libx11-6 (>= 2:1.4.99.1), libxext6
Pre-Depends: multiarch-support
Description: X11 Xinerama extension library
libXinerama provides an X Window System client interface to the XINERAMA
extension to the X protocol.
.
The Xinerama (also known as panoramiX) extension allows for multiple screens
attached to a single display to be treated as belonging together, and to give
desktop applications a better idea of the monitor layout.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxapian30
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2512
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xapian-core
Version: 1.4.5-1ubuntu0.1
Depends: libc6 (>= 2.15), libgcc1 (>= 1:3.4), libstdc++6 (>= 5.2), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: xapian-tools
Description: Search engine library
This package contains the core Xapian runtime library.
.
The Xapian search engine library is a highly adaptable toolkit which allows
developers to easily add advanced indexing and search facilities to their own
applications. It implements the probabilistic model of information retrieval,
and provides facilities for performing ranked free-text searches, relevance
feedback, phrase searching, boolean searching, stemming, and simultaneous
update and searching. It is highly scalable, and is capable of working with
collections containing hundreds of millions of documents.
Homepage: https://xapian.org/
Original-Maintainer: Olly Betts <olly@survex.com>
Package: python3-pbr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 291
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-pbr
Version: 3.1.1-3ubuntu3
Depends: python3-pkg-resources, python3-six, python3:any (>= 3.3.2-2~)
Description: inject useful and sensible default behaviors into setuptools - Python 3.x
PBR (Python Build Reasonableness) is a library that injects some useful and
sensible default behaviors into your setuptools run. PBR can:
* Manage version number based on git revisions and tags (Version file).
* Generate AUTHORS file from git log
* Generate ChangeLog from git log
* Generate Sphinx autodoc stub files for your whole module
* Store your dependencies in a pip requirements file
* Use your README file as a long_description
* Smartly find packages under your root package
.
PBR is only mildly configurable. The basic idea is that there's a decent way
to run things and if you do, you should reap the rewards, because then it's
simple and repeatable. If you want to do things differently, cool! But you've
already got the power of Python at your fingertips, so you don't really need
PBR.
.
PBR builds on top of the work that d2to1 started to provide for declarative
configuration. d2to1 is itself an implementation of the ideas behind
distutils2. Although distutils2 is now abandoned in favor of work towards PEP
426 and Metadata 2.0, declarative config is still a great idea and
specifically important in trying to distribute setup code as a library when
that library itself will alter how the setup is processed. As Metadata 2.0 and
other modern Python packaging PEPs come out, PBR aims to support them as
quickly as possible.
.
This package provides support for Python 3.x.
Homepage: https://pypi.python.org/pypi/pbr
Original-Maintainer: Debian OpenStack <openstack-devel@lists.alioth.debian.org>
Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1593
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.17.1-1ubuntu0.18
Replaces: git (<< 1:1.7.4~rc1), git-core (<< 1:1.7.0.4-1.)
Breaks: git (<< 1:1.7.4~rc1)
Description: fast, scalable, distributed revision control system (manual pages)
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides reference documentation for use by the 'man'
utility and the 'git help' command.
Homepage: https://git-scm.com/
Original-Maintainer: Gerrit Pape <pape@smarden.org>
Package: node-ansi-color-table
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-1
Depends: nodejs, node-ansi
Description: Color and format tables for ansi output - Node.js module
This module outputs borderless tables to stdout or to a writable stream,
with ansi colors and formatting support.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/quimcalpe/ansi-color-table
Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: distro-info
Version: 0.18ubuntu0.18.04.1
Depends: distro-info-data, python3:any (>= 3.3.2-2~)
Description: information about distributions' releases (Python 3 module)
Information about all releases of Debian and Ubuntu.
.
This package contains a Python 3 module for parsing the data in
distro-info-data. There is also a command line interface in the distro-info
package.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>
Package: ufw
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 818
Maintainer: Jamie Strandboge <jamie@ubuntu.com>
Architecture: all
Version: 0.35-5
Depends: iptables, lsb-base (>= 3.0-6), ucf, python3:any (>= 3.3.2-2~), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~)
Suggests: rsyslog
Conffiles:
/etc/default/ufw ef91ecde4a64da5c98da8968849804d5
/etc/init.d/ufw 4156943ab8a824fcf4b04cc1362eb230
/etc/logrotate.d/ufw 12b1fb7cee76fc46f161e1ead1a22ce6
/etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1
/etc/ufw/sysctl.conf 7723079fc108eda8f57eddab3079c70a
Description: program for managing a Netfilter firewall
The Uncomplicated FireWall is a front-end for iptables, to make managing a
Netfilter firewall easier. It provides a command line interface with syntax
similar to OpenBSD's Packet Filter. It is particularly well-suited as a
host-based firewall.
Homepage: https://launchpad.net/ufw
Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.2-1
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: X11 Session Management library
This package provides the main interface to the X11 Session Management
library, which allows for applications to both manage sessions, and make use
of session managers to save and restore their state for later use.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libSM
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-image-5.4.0-1096-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10320
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1096.104~18.04.1
Config-Version: 5.4.0-1096.104~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1096-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1096-aws
Conflicts: linux-image-unsigned-5.4.0-1096-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1096.104~18.04.1)
Package: eatmydata
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libeatmydata
Version: 105-6
Depends: libeatmydata1 (>= 105-6)
Description: Library and utilities designed to disable fsync and friends
This package contains a small LD_PRELOAD library (libeatmydata) and a couple
of helper utilities designed to transparently disable fsync and friends (like
open(O_SYNC)). This has two side-effects: making software that writes data
safely to disk a lot quicker and making this software no longer crash safe.
.
You will find eatmydata useful if particular software calls fsync(), sync()
etc. frequently but the data it stores is not that valuable to you and you may
afford losing it in case of system crash. Data-to-disk synchronization calls
are typically very slow on modern file systems and their extensive usage might
slow down software significantly. It does not make sense to accept such a hit
in performance if data being manipulated is not very important.
.
On the other hand, do not use eatmydata when you care about what software
stores or it manipulates important components of your system. The library is
called libEAT-MY-DATA for a reason.
Original-Maintainer: Mattia Rizzolo <mattia@debian.org>
Homepage: https://launchpad.net/libeatmydata
Package: node-osenv
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.1.4-1
Depends: nodejs
Description: Environment settings lookup module for Node.js
node-osenv looks for hostname, user, prompt, tmpdir, home, path,
editor, shell in environment variables, utilities like hostname or
whoami, with appropriate default values.
It supports the same platforms as Node.js does.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/osenv
Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.12+dfsg-6ubuntu0.18.04.4
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
GNU cpio is a tool for creating and extracting archives, or copying
files from one place to another. It handles a number of cpio formats
as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: librsvg2-bin
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: librsvg
Version: 2.40.20-2ubuntu0.2
Depends: libc6 (>= 2.4), libcairo2 (>= 1.6.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.2.0), librsvg2-2 (>= 2.40.20-2ubuntu0.2)
Description: command-line and graphical viewers for SVG files
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package includes a command-line utility to convert the SVG files
to the PNG format and a graphical SVG viewer.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: keyboard-configuration
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 2557
Maintainer: Ubuntu Installer Team <ubuntu-installer@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.178ubuntu2.7
Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47)
Depends: liblocale-gettext-perl
Pre-Depends: debconf (>= 1.5.34)
Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47)
Description: system-wide keyboard preferences
This package maintains the keyboard preferences in
/etc/default/keyboard. Other packages can use the information
provided by this package in order to configure the keyboard on the
console or in X Window.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.16-11
Replaces: popt
Depends: libc6 (>= 2.27)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
Original-Maintainer: Michael Jeanson <mjeanson@debian.org>
Homepage: http://rpm5.org/
Package: node-npmlog
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.4-1
Depends: nodejs, node-ansi
Description: Logger with custom levels and colored output for Node.js
node-npmlog is a basic logger module used by npm.
.
npm is the package manager bundled with Node.js.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/npmlog
Package: libpathplan4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Depends: libc6 (>= 2.15)
Conflicts: libgraphviz4
Description: rich set of graph drawing tools - pathplan library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the pathplan library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: libhttp-parser2.7.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: http-parser
Version: 2.7.1-2ubuntu0.1
Depends: libc6 (>= 2.2.5)
Description: parser for HTTP messages written in C
It parses both requests and responses. The parser is designed to be used in
performance HTTP applications. It does not make any syscalls nor allocations,
it does not buffer data, it can be interrupted at anytime. Depending on your
architecture, it only requires about 40 bytes of data per message stream (in
a web server that is per connection).
Homepage: https://github.com/joyent/http-parser
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: powermgmt-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.33
Description: common utils for power management
This package contains utilities for power management; beside certain
mostly obsolete scripts, you'd want this package for "on_ac_power"
which lets you determine whether the system is powered from battery
or an abundant supply. It's recommended to use this tool over a
simple sysfs check, ConditionACPower or other ad-hoc methods which
notoriously fail to account for unobvious quirks, both old and new.
Original-Maintainer: Adam Borowski <kilobyte@angband.pl>
Package: libxt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1373
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.1.5-1
Depends: libxt6 (= 1:1.1.5-1), libx11-dev, x11proto-core-dev, libsm-dev
Suggests: libxt-doc
Description: X11 toolkit intrinsics library (development headers)
libXt provides the X Toolkit Intrinsics, an abstract widget library upon
which other toolkits are based. Xt is the basis for many toolkits, including
the Athena widgets (Xaw), and LessTif (a Motif implementation).
.
This package contains the development headers for the library found in
libxt6. Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 24-1ubuntu3
Depends: libc6 (>= 2.17), libkmod2 (= 24-1ubuntu3), lsb-base
Breaks: oss-compat (= 4)
Conffiles:
/etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
/etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
/etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
/etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
/etc/modprobe.d/blacklist-framebuffer.conf 662be7eaefa6b67fcddb5d90981e1c29
/etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
/etc/modprobe.d/blacklist.conf bc6754fa320733c6d239a4bb0148ffd7
/etc/modprobe.d/iwlwifi.conf f27bc645e93e20c8e532325d190ac8ee
Description: tools for managing Linux kernel modules
This package contains a set of programs for loading, inserting, and
removing kernel modules for Linux.
It replaces module-init-tools.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2build1
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
Contains the runtime environment required by programs that make use
of extended attributes.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/attr/
Package: libsm-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.2-1
Depends: libsm6 (= 2:1.2.2-1), x11proto-core-dev, libice-dev (>= 1:1.0.0-1)
Suggests: libsm-doc
Description: X11 Session Management library (development headers)
This package provides the main interface to the X11 Session Management
library, which allows for applications to both manage sessions, and make use
of session managers to save and restore their state for later use.
.
This package contains the development headers for the library found in libsm6.
Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libSM
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-image-5.4.0-1065-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10307
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1065.68~18.04.1
Config-Version: 5.4.0-1065.68~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1065-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1065-aws
Conflicts: linux-image-unsigned-5.4.0-1065-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1065.68~18.04.1)
Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.4
Depends: libc6 (>= 2.14), libkrb5support0 (>= 1.16)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime cryptography libraries used by
applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: linux-image-4.15.0-1021-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 7842
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1021.21
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-4.15.0-1021-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-doc-4.15.0 | linux-aws-source-4.15.0, linux-aws-tools, linux-headers-4.15.0-1021-aws
Description: Linux kernel image for version 4.15.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 4.15.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-ansi
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.3.0-2ubuntu1
Depends: nodejs
Description: Advanced ANSI formatting tool for Node.js
node-ansi is a module for Node.js that provides an easy-to-use API
for writing ANSI escape codes to Stream instances.
ANSI escape codes are used to do fancy things in a terminal window,
like render text in colors, delete characters, lines, the entire window,
or hide and show the cursor, and lots more.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/TooTallNate/ansi.js
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.4
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.17)
Description: command-line interface parsing library
libss provides a simple command-line interface parser which will
accept input from the user, parse the command into an argv argument
vector, and then dispatch it to a handler function.
.
It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: libisccc160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4)
Description: Command Channel Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisccc shared library used by BIND's daemons
and clients, particularly rndc.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: linux-image-4.15.0-1060-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 8247
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1060.62
Config-Version: 4.15.0-1060.62
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-4.15.0-1060-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-doc-4.15.0 | linux-aws-source-4.15.0, linux-aws-tools, linux-headers-4.15.0-1060-aws
Description: Linux kernel image for version 4.15.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 4.15.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libestr0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libestr
Version: 0.1.10-2.1
Depends: libc6 (>= 2.14)
Description: Helper functions for handling strings (lib)
The 'libestr' library contains some essential string manipulation
functions and more, like escaping special characters.
.
This package contains the shared library.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://libestr.sourceforge.net/
Package: libexpat1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 444
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.2.5-3ubuntu0.9
Depends: libc6 (>= 2.25)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
This package contains the runtime, shared library of expat, the C
library for parsing XML. Expat is a stream-oriented parser in
which an application registers handlers for things the parser
might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper
Version: 1.1.24+nmu5ubuntu1
Replaces: libpaper1 (<< 1.1.10), libpaperg (<< 1.1.9)
Depends: libc6 (>= 2.4), libpaper1
Description: library for handling paper characteristics (utilities)
The libpaper paper-handling library automates recognition of many
different paper types and sizes for programs that need to deal with
printed output.
.
This package contains utilities for setting the system's default
paper type and for accessing paper type information from shell
scripts.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Package: libicu60
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 31075
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 60.2-3ubuntu3.2
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Breaks: openttd (<= 1.7.1-1)
Description: International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains the runtime
libraries for ICU.
Homepage: http://www.icu-project.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: node-is-builtin-module
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 15
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-1
Depends: nodejs, node-builtin-modules (>= 1.0.0)
Description: Check if string matches name of a Node.js builtin module
Check if a string matches the name of a Node.js builtin module.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/sindresorhus/is-builtin-module
Package: php-psr-log
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.2-1
Depends: php-common
Description: common interface for logging libraries
The main goal is to allow libraries to receive a Psr\Log\LoggerInterface object
and write logs to it in a simple and universal way. Frameworks and CMSs that
have custom needs MAY extend the interface for their own purpose, but SHOULD
remain compatible with this document. This ensures that the third-party
libraries an application uses can write to the centralized application logs.
.
The LoggerInterface exposes eight methods to write logs to the eight RFC 5424
levels (debug, info, notice, warning, error, critical, alert, emergency).
.
A ninth method, log, accepts a log level as first argument. Calling this method
with one of the log level constants MUST have the same result as calling the
level-specific method. Calling this method with a level not defined by this
specification MUST throw a Psr\Log\InvalidArgumentException if the
implementation does not know about the level. Users SHOULD NOT use a custom
level without knowing for sure the current implementation supports it.
.
Note that this is not a logger of its own. It is merely an interface that
describes a logger. See the specification for more details.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/php-fig/log
Package: python3-pam
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-pam
Version: 0.4.2-13.2ubuntu4
Depends: python3 (<< 3.7), python3 (>= 3.6~), libc6 (>= 2.4), libpam0g (>= 0.99.7.1)
Suggests: python3-pam-dbg
Description: Python interface to the PAM library
This module makes the PAM (Pluggable Authentication Modules) functions
available in Python 3. With this module you can write Python 3 applications
that implement authentication services using PAM.
Original-Maintainer: Dima Barsky <dima@debian.org>
Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.18-1
Replaces: mailtools (<= 1.15-1)
Provides: libmail-perl, mailtools
Depends: perl, libnet-perl, libtimedate-perl, libnet-smtp-ssl-perl
Conflicts: mailtools (<= 1.15-1)
Description: Manipulate email in perl programs
This is a set of perl modules which provide an easy interface to
manipulating email in an object-oriented fashion.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/dist/MailTools/
Package: libparted2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.2-20
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16)
Suggests: parted, libparted-dev, libparted-i18n (= 3.2-20)
Breaks: python-parted (<< 3.6-5)
Description: disk partition manipulator - shared library
GNU Parted is a program that allows you to create, destroy, resize,
move, and copy disk partitions. This is useful for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
.
This package contains the shared library.
Original-Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Homepage: http://www.gnu.org/software/parted
Package: libfftw3-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: fftw3
Version: 3.3.7-1
Replaces: libfftw3-dev (<< 3.3.2-1)
Depends: libc6 (>= 2.7), libfftw3-double3 (>= 3.3.5), libfftw3-long3 (>= 3.3.5), libfftw3-quad3 (>= 3.3.5), libfftw3-single3 (>= 3.3.5)
Breaks: libfftw3-dev (<< 3.3.2-1)
Description: Library for computing Fast Fourier Transforms - Tools
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast.
.
This package contains the wisdom management tools.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 487-0.1
Depends: libc6 (>= 2.14), libtinfo5 (>= 6), debianutils (>= 1.8)
Description: pager program similar to more
This package provides "less", a file pager (that is, a memory-efficient
utility for displaying text one screenful at a time). Less has many
more features than the basic pager "more". As part of the GNU project,
it is widely regarded as the standard pager on UNIX-derived systems.
.
Also provided are "lessecho", a simple utility for ensuring arguments
with spaces are correctly quoted; "lesskey", a tool for modifying the
standard (vi-like) keybindings; and "lesspipe", a filter for specific
types of input, such as .doc or .txt.gz files.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.greenwoodsoftware.com/less/
Package: php-symfony-finder
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 3.4.6+dfsg-1ubuntu0.1
Depends: php-common
Description: find files and directories
The Symfony Finder Component provides an intuitive interface to
find files and directories.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/3.4/components/finder.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: python3-roman
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-roman
Version: 2.0.0-3
Depends: python3:any (>= 3.3.2-2~)
Description: module for generating/analyzing Roman numerals for Python 3
This module converts from and to Roman numerals. It can convert numbers
from 1 to 4999 and understands the common shortcuts (IX == 9), but not
illegal ones (MIM == 1999).
.
This package includes Python 3 modules.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/roman/
Package: libpcre3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2159
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.43-1+ubuntu18.04.1+deb.sury.org+1
Depends: libc6-dev, libpcre3 (= 2:8.43-1+ubuntu18.04.1+deb.sury.org+1), libpcre16-3 (= 2:8.43-1+ubuntu18.04.1+deb.sury.org+1), libpcre32-3 (= 2:8.43-1+ubuntu18.04.1+deb.sury.org+1), libpcrecpp0v5 (= 2:8.43-1+ubuntu18.04.1+deb.sury.org+1)
Description: Perl 5 Compatible Regular Expression Library - development files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
This package contains the development files, including headers, static
libraries, and documentation.
Package: linux-image-5.4.0-1085-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10291
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1085.92~18.04.1
Config-Version: 5.4.0-1085.92~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1085-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1085-aws
Conflicts: linux-image-unsigned-5.4.0-1085-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1085.92~18.04.1)
Package: linux-modules-5.4.0-1049-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69440
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1049.51~18.04.1
Config-Version: 5.4.0-1049.51~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.1-9.1ubuntu1
Replaces: make-guile
Depends: libc6 (>= 2.27)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
GNU Make is a utility which controls the generation of executables
and other target files of a program from the program's source
files. It determines automatically which pieces of a large program
need to be (re)created, and issues the commands to (re)create
them. Make can be used to organize any task in which targets (files)
are to be automatically updated based on input files whenever the
corresponding input is newer --- it is not limited to building
computer programs. Indeed, Make is a general purpose dependency
solver.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>
Homepage: http://www.gnu.org/software/make/
Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 338
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.2-1.3ubuntu0.1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
The native format of liblzma is XZ; it also supports raw (headerless)
streams and the older LZMA format used by lzma. (For 7-Zip's related
format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: libjson-glib-1.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: json-glib
Version: 1.4.2-3ubuntu0.18.04.1
Description: GLib JSON manipulation library (common files)
JSON-GLib is a library for parsing, generating and manipulating JavaScript
Object Notation (JSON) data streams using the GLib type system. It allows
manipulating JSON data types with a Document Object Model API. It also
allows serializing and deserializing simple or complex GObjects to and
from JSON data types.
.
This package contains the translations files.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fontconfig
Version: 2.12.6-0ubuntu2
Replaces: fontconfig (<< 2.3.2-2)
Depends: ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont
Conflicts: fontconfig (<< 2.3.2-2)
Conffiles:
/etc/fonts/conf.avail/10-antialias.conf 3629dcc380ac8c5b0306febc33b5667b
/etc/fonts/conf.avail/10-autohint.conf 2f1cac91d6c79102f0de9956d39037d5
/etc/fonts/conf.avail/10-hinting-full.conf 7355ccf563673bba3a624a9743f08ecd
/etc/fonts/conf.avail/10-hinting-medium.conf 37e71080d951c5a10bde8fae35054a53
/etc/fonts/conf.avail/10-hinting-none.conf 3fda7e38a4df988da0145785727a0c35
/etc/fonts/conf.avail/10-hinting-slight.conf e5e7ba1dabdf33446e2eecea658fd249
/etc/fonts/conf.avail/10-no-sub-pixel.conf 3ce5b92d9984c968827c70f9c89cfef9
/etc/fonts/conf.avail/10-scale-bitmap-fonts.conf b19465d66bd1530132fb1a397e538346
/etc/fonts/conf.avail/10-sub-pixel-bgr.conf 3d239181743d3ebfbbfa2bafe211ae0c
/etc/fonts/conf.avail/10-sub-pixel-rgb.conf 2ac915a20e9b2b969d81c9b359afffce
/etc/fonts/conf.avail/10-sub-pixel-vbgr.conf 29d7b694ec6d7260a475fe9d9a45a9a0
/etc/fonts/conf.avail/10-sub-pixel-vrgb.conf 15bc20b8895b039e23952c637bcc1a70
/etc/fonts/conf.avail/10-unhinted.conf 532865fefdf3e37ceeb77010accb3b47
/etc/fonts/conf.avail/11-lcdfilter-default.conf a877f23d2e9179ef3a1ee0ab6a9e2b15
/etc/fonts/conf.avail/11-lcdfilter-legacy.conf 7eeabd78833172177d7f92d39ec273ce
/etc/fonts/conf.avail/11-lcdfilter-light.conf f6f338937c5a7a0254ab27a5532a79a0
/etc/fonts/conf.avail/20-unhint-small-vera.conf 6fb496d0bb963a54d5db870955ddd771
/etc/fonts/conf.avail/25-unhint-nonlatin.conf a5379350710f56a807962f3f06d3ffc1
/etc/fonts/conf.avail/30-metric-aliases.conf 8aee43360f3d9187cb106058010ad7e5
/etc/fonts/conf.avail/40-nonlatin.conf 369218e37e97e775509af39d8068af9d
/etc/fonts/conf.avail/45-generic.conf 4f38c1c74a35ad3f3b0019d2e70a0ced
/etc/fonts/conf.avail/45-latin.conf ad179863cb00202a2439ef508c0ce47f
/etc/fonts/conf.avail/49-sansserif.conf 22278b0b48e5864d9c7fcbc178da0db3
/etc/fonts/conf.avail/50-user.conf d01cf387e9d7ebacb173629853094d76
/etc/fonts/conf.avail/51-local.conf a2fa562c168c2c4cc0c2480bfdc0f8eb
/etc/fonts/conf.avail/53-monospace-lcd-filter.conf c26a2fcc075fe704fefc68d13219cb20
/etc/fonts/conf.avail/60-generic.conf 52ab5417c77e350131006a99c08a2962
/etc/fonts/conf.avail/60-latin.conf 49e8e27d0791250540cb4b598adbbd84
/etc/fonts/conf.avail/65-fonts-persian.conf 4600ab82eed76e726bffb2fc99d1f1b7
/etc/fonts/conf.avail/65-khmer.conf ce66ea0c26f43091ab70092f3f7024d4
/etc/fonts/conf.avail/65-nonlatin.conf fde2fbf08ea245a4bb0640a8128d5c03
/etc/fonts/conf.avail/69-unifont.conf 49a6cb52e1cf23e0f691807a3e8c105d
/etc/fonts/conf.avail/70-force-bitmaps.conf 6423e63e204d4ea4629cd3f58636fcdc
/etc/fonts/conf.avail/70-no-bitmaps.conf dccfa658875eea3b30514d7a8bc306bc
/etc/fonts/conf.avail/70-yes-bitmaps.conf 91c414090c7d8bfe557785fe845cb6bd
/etc/fonts/conf.avail/80-delicious.conf fcad9a0561af18b7965910ccea55453f
/etc/fonts/conf.avail/90-synthetic.conf 7659edb861f44ff8e9f4e31567d24e47
/etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729
/etc/fonts/fonts.conf e5a20933b7971c1cb7d858913709dcba
Description: generic font configuration library - configuration
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Keith Packard <keithp@debian.org>
Package: liblab-gamut1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2480
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Depends: libc6 (>= 2.2.5)
Description: rich set of graph drawing tools - liblab_gamut library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the liblab_gamut library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: python3-pil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1370
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pillow
Version: 5.1.0-1ubuntu0.8
Replaces: python3-imaging (<< 1.1.7+2.0.0-1.1)
Provides: python3-pillow
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), mime-support | python3-pil.imagetk, libc6 (>= 2.14), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), libtiff5 (>= 4.0.3), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwebpmux3 (>= 0.6.1-2ubuntu0.18.04.1), zlib1g (>= 1:1.1.4)
Recommends: python3-olefile
Suggests: python-pil-doc, python3-pil-dbg
Breaks: python3-imaging (<< 1.1.7+2.0.0-1.1)
Conflicts: python3-imaging (<< 1.1.7+2.0.0-1.1)
Description: Python Imaging Library (Python3)
The Python Imaging Library (PIL) adds an image object to your Python
interpreter. You can load images from a variety of file formats, and
apply a rich set of image operations to them.
.
Image Objects:
o Bilevel, greyscale, palette, true colour (RGB), true colour with
transparency (RGBA).
o colour separation (CMYK).
o Copy, cut, paste operations.
o Flip, transpose, resize, rotate, and arbitrary affine transforms.
o Transparency operations.
o Channel and point operations.
o Colour transforms, including matrix operations.
o Image enhancement, including convolution filters.
.
File Formats:
o Full (Open/Load/Save): BMP, EPS (with ghostscript), GIF, IM, JPEG,
MSP, PDF, PNG, PPM, TIFF, XBM.
o Read only (Open/Load): ARG, CUR, DCX, FLI, FPX, GBR, GD, ICO, IMT, IPTC,
MCIDAS, MPEG, PhotoCD, PCX, PIXAR, PSD, TGA, SGI, SUN, TGA, WMF, XPM.
o Save only: PDF, EPS (without ghostscript).
Homepage: http://python-pillow.github.io/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: klibc-utils
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: klibc
Version: 2.0.4-9ubuntu2.1
Depends: libklibc (= 2.0.4-9ubuntu2.1)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
This package contains a collection of programs that are linked
against klibc. These duplicate some of the functionality of a
regular Linux toolset, but are typically much smaller than their
full-function counterparts. They are intended for inclusion in
initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: maximilian attems <maks@debian.org>
Package: libbz2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1ubuntu0.2
Replaces: bzip2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1ubuntu0.2), libc6-dev | libc-dev
Recommends: bzip2-doc
Description: high-quality block-sorting file compressor library - development
Static libraries and include files for the bzip2 compressor library.
.
bzip2 is a freely available, patent free, high-quality data compressor.
It typically compresses files to within 10% to 15% of the best available
techniques, whilst being around twice as fast at compression and six
times faster at decompression.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: libsynctex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: TeX Live: SyncTeX parser library
Library for SyncTeX parsing support.
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: libidn2-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 146
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.0.4-1.1ubuntu0.2
Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) library
Libidn2 implements the revised algorithm for internationalized domain
names called IDNA2008/TR46.
.
This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>
Package: libxmlsec1-openssl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.25-1build1
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0), libxml2 (>= 2.7.4), libxmlsec1 (>= 1.2.25)
Description: Openssl engine for the XML security library
The XML Security Library implements standards related to secure handling
of XML data.
.
This package provides dynamic libraries for use by applications.
Specifically, it provides the openssl implementation of the XML security
library cryptography functions.
Homepage: http://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: update-manager-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:18.04.11.4
Replaces: update-manager (<< 1:0.146.2)
Depends: python3:any (>= 3.2~), python3-update-manager (= 1:18.04.11.4), python3-distro-info, distro-info-data, lsb-release, ubuntu-release-upgrader-core (>= 1:18.04.9)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: computer-janitor (<= 1.11-0ubuntu1), update-manager (<< 1:0.146.2)
Description: manage release upgrades
This is the core of update-manager and the release upgrader
Package: linux-modules-5.4.0-1072-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69680
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1072.77~18.04.1
Config-Version: 5.4.0-1072.77~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libjs-node-uuid
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: node-uuid
Version: 1.4.7-5
Recommends: javascript-common
Description: simple and fast RFC4122 UUID generation - JavaScript library
Node-uuid provides simple, fast generation of RFC4122 UUIDs.
.
* Generate RFC4122 version 1 or version 4 UUIDs
* Runs in Node.js and web browsers
* Cryptographically strong random number generation on supporting platforms
* Small footprint
.
This package provides node-uuid usable directly in web browsers.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/broofa/node-uuid
Package: linux-modules-5.4.0-1066-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69653
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1066.69~18.04.1
Config-Version: 5.4.0-1066.69~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libperl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 17060
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.26.1-6ubuntu0.7
Depends: perl:any (= 5.26.1-6ubuntu0.7), libperl5.26 (= 5.26.1-6ubuntu0.7), libc6-dev | libc-dev
Description: Perl library: development files
Files for developing applications which embed a Perl interpreter.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
This package contains the library files needed to run software using
libxcb-render, the render extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: libevent-2.1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 370
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.8-stable-4build1
Depends: libc6 (>= 2.17)
Description: Asynchronous event notification library
Libevent is an asynchronous event notification library that provides a
mechanism to execute a callback function when a specific event occurs
on a file descriptor or after a timeout has been reached.
.
It is meant to replace the asynchronous event loop found in
event driven network servers. Currently, libevent supports /dev/poll,
kqueue(2), event ports, select(2), poll(2) and epoll(4).
.
For backward compatibility and to transition to "libevent_core only"
or "libevent_core + libevent_extra", the libevent source package builds
the libevent library that includes everything in libevent_core and
libevent_extra.
Homepage: http://libevent.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.04-1
Depends: libio-socket-ssl-perl, perl
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
for its network operations. Due to the nature of Net::SMTP's new method, it is
not overridden to make use of a default port for the SMTPS service. Perhaps
future versions will be smart like that. Port 465 is usually what you want,
and it's not a pain to specify that.
.
This package is deprecated. Net::SMTP (in perl core) has support for SMTP
over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Net-SMTP-SSL
Package: pollinate
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 53
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 4.33-0ubuntu1~18.04.1
Depends: curl, adduser, xxd | vim-common
Conffiles:
/etc/default/pollinate a9f810379e139b53608f090ebd954954
/etc/pollinate/entropy.ubuntu.com.pem 9f437b2251c81f7ddf7624ac761ba249
Description: seed the pseudo random number generator
This client will connect to one or more Pollen (entropy-as-a-service)
servers over an (optionally) encrypted connection and retrieve a random
seed over HTTP or HTTPS.
This is particularly useful at the first boot of cloud images and in
virtual machines, to seed a system's random number generator at
genesis, and is intended to supplement the /etc/init.d/urandom init script.
It can be used on physical machines, as well, to supplement the seeding
of the pseudo random number generator.
Homepage: http://launchpad.net/pollinate
Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.6-2
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
libnetfilter_conntrack is a userspace library providing a programming
interface (API) to the in-kernel connection tracking state table.
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/
Package: python3.6
Status: install ok installed
Priority: important
Section: python
Installed-Size: 329
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.6.9-1~18.04ubuntu1.12
Depends: python3.6-minimal (= 3.6.9-1~18.04ubuntu1.12), libpython3.6-stdlib (= 3.6.9-1~18.04ubuntu1.12), mime-support
Suggests: python3.6-venv, python3.6-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.6)
Python is a high-level, interactive, object-oriented language. Its 3.6 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libgvc6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1677
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Replaces: libgv-php5
Depends: libc6 (>= 2.27), libcairo2 (>= 1.2.4), libcdt5, libcgraph6, libexpat1 (>= 2.0.1), libgd3 (>= 2.1.0~alpha~), libglib2.0-0 (>= 2.16.0), libgts-0.7-5 (>= 0.7.6), libltdl7 (>= 2.4.6), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libpathplan4, libx11-6, zlib1g (>= 1:1.1.4)
Breaks: libgv-php5
Conflicts: libgraphviz4, libgvc5
Description: rich set of graph drawing tools - gvc library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the gvc library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: linux-image-5.4.0-1101-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 10324
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1101.109~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1101-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1101-aws
Conflicts: linux-image-unsigned-5.4.0-1101-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1101.109~18.04.1)
Package: linux-modules-5.4.0-1055-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69501
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1055.58~18.04.1
Config-Version: 5.4.0-1055.58~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpam-systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 371
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.57
Depends: libc6 (>= 2.25), libpam0g (>= 0.99.7.1), systemd (= 237-3ubuntu10.57), libpam-runtime (>= 1.0.1-6), dbus, systemd-sysv
Description: system and service manager - PAM module
This package contains the PAM module which registers user sessions in
the systemd control group hierarchy for logind.
.
If in doubt, do install this package.
.
Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: php-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 2619
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Version: 3.4.4-4+ubuntu18.04.1+deb.sury.org+1
Provides: php5.6-imagick, php7.0-imagick, php7.1-imagick, php7.2-imagick, php7.3-imagick, php7.4-imagick
Depends: phpapi-20190902 | phpapi-20180731 | phpapi-20170718 | phpapi-20160303 | phpapi-20151012 | phpapi-20131226, libc6 (>= 2.14), libmagickcore-6.q16-3 (>= 8:6.9.6.8), libmagickwand-6.q16-3 (>= 8:6.9.6.8)
Pre-Depends: php-common (>= 2:69~)
Recommends: ghostscript, ttf-dejavu-core
Conffiles:
/etc/php/5.6/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
/etc/php/7.0/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
/etc/php/7.1/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
/etc/php/7.2/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
/etc/php/7.3/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
/etc/php/7.4/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
Description: Provides a wrapper to the ImageMagick library
Imagick is a native php extension to create and modify images using the
ImageMagick API.
This extension requires ImageMagick version 6.2.4+ and PHP 5.1.3+.
.
IMPORTANT: Version 2.x API is not compatible with earlier versions.
Homepage: http://pecl.php.net/package/imagick
Package: linux-modules-5.4.0-1032-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65657
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1032.33~18.04.1
Config-Version: 5.4.0-1032.33~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
This package contains helper binaries used by the standard set of PAM
modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: linux-aws-5.4-headers-5.4.0-1092
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71122
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1092.100~18.04.2
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1092/debian.README.gz for details
Package: libemail-valid-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.202-1
Depends: perl, libmailtools-perl, libnet-dns-perl, libnet-domain-tld-perl, netbase
Description: Perl module for checking the validity of Internet email addresses
Email::Valid determines whether an email address is well-formed, and
optionally, whether a mail host exists for the domain.
.
Please note that there is no way to determine whether an address targets
a valid recipient without actually attempting to deliver a message.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Email-Valid
Package: node-hosted-git-info
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.5.0-1
Depends: nodejs
Description: Provides metadata from Github, Bitbucket and Gitlab
Provides metadata and conversions from repository urls for Github, Bitbucket
and Gitlab
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/npm/hosted-git-info
Package: libptexenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Depends: libc6 (>= 2.4), libkpathsea6
Breaks: texlive-base (<< 2014), texlive-binaries (<< 2014)
Description: TeX Live: pTeX encoding library
library for encoding support in pTeX, a Japanese TeX engine.
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 674
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 1.6.5ubuntu0.5
Replaces: python-apt (<< 0.7.98+nmu1)
Provides: python3.6-apt
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libapt-inst2.0 (>= 1.6.5~), libapt-pkg5.0 (>= 1.6.5~), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), python-apt-common
Recommends: lsb-release, iso-codes
Suggests: python3-apt-dbg, python-apt-doc, apt
Breaks: python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
The apt_pkg Python 3 interface will provide full access to the internal
libapt-pkg structures allowing Python 3 programs to easily perform a
variety of functions, such as:
.
- Access to the APT configuration system
- Access to the APT package information database
- Parsing of Debian package control files, and other files with a
similar structure
.
The included 'aptsources' Python interface provides an abstraction of
the sources.list configuration on the repository and the distro level.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: python3-dbus
Status: install ok installed
Priority: important
Section: python
Installed-Size: 393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-python
Version: 1.2.6-1
Provides: python3.6-dbus
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.4~), libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.40)
Recommends: python3-gi
Suggests: python-dbus-doc, python3-dbus-dbg
Description: simple interprocess messaging system (Python 3 interface)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
This package provides a Python 3 interface to D-Bus.
.
See the dbus description for more information about D-Bus in general.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings#Python
Package: libip4tc0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.1-2ubuntu2
Depends: libc6 (>= 2.14)
Description: netfilter libip4tc library
The user-space iptables (IPv4) C library from the Netfilter xtables framework.
.
iptables IPv4 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libpam-cap
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap2
Version: 1:2.25-1.2
Replaces: libcap2-bin (<< 1:2.22-1.1)
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), libpam-runtime (>= 1.1.3-2~)
Breaks: libcap2-bin (<< 1:2.22-1.1)
Conffiles:
/etc/security/capability.conf fa5804a90b16addeec23008102b4746d
Description: POSIX 1003.1e capabilities (PAM module)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains the PAM module for enforcing capabilities on users and
groups at PAM session start time.
Original-Maintainer: Christian Kastner <ckk@debian.org>
Homepage: http://sites.google.com/site/fullycapable/
Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
'grep' is a utility to search for text in files; it can be used from the
command line or in scripts. Even if you don't want to use it, other packages
on your system probably will.
.
The GNU family of grep utilities may be the "fastest grep in the west".
GNU grep is based on a fast lazy-state deterministic matcher (about
twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
search for a fixed string that eliminates impossible text from being
considered by the full regexp matcher without necessarily having to
look at every character. The result is typically many times faster
than Unix grep or egrep. (Regular expressions containing backreferencing
will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/
Package: glib-networking-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib-networking
Version: 2.56.0-1ubuntu0.1
Recommends: glib-networking
Description: network-related giomodules for GLib - data files
This package contains data files and translations for the GIO network
extensions in glib-networking.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: liblxc-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1318
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 3.0.1-0ubuntu1~18.04.2
Replaces: lxc-common, lxc-templates (<< 3.0.0~beta1-0ubuntu1~), lxc-utils (<< 3.0.0~beta2-0ubuntu2~), lxc1 (<< 3.0.0~beta2-0ubuntu2~)
Provides: lxc-common
Depends: liblxc1 (= 3.0.1-0ubuntu1~18.04.2), libc6 (>= 2.17)
Breaks: lxc-templates (<< 3.0.0~beta1-0ubuntu1~), lxc-utils (<< 3.0.0~beta2-0ubuntu2~), lxc1 (<< 3.0.0~beta2-0ubuntu2~)
Conflicts: lxc-common
Conffiles:
/etc/apparmor.d/abstractions/lxc/container-base ebe5b2890dfe8e4185bf78775ad3dae3
/etc/apparmor.d/abstractions/lxc/start-container b4a8dee8b0df3406ec4e56184719cf89
/etc/apparmor.d/lxc-containers 78fd8b29fb81887bdab6313b3f5e6b3d
/etc/apparmor.d/lxc/lxc-default eae02786d40a1ff7d317362d181f6eee
/etc/apparmor.d/lxc/lxc-default-cgns 128c9d5468f16fdbd41033393c03b104
/etc/apparmor.d/lxc/lxc-default-with-mounting 5e239a4100457fc09b4f02327283259d
/etc/apparmor.d/lxc/lxc-default-with-nesting 0bbb509f3cb98028c754b9a3eb84d556
/etc/apparmor.d/usr.bin.lxc-start e3822e488353a11a11387a4b3a3132b2
Description: Linux Containers userspace tools (common tools)
Containers are insulated areas inside a system, which have their own namespace
for filesystem, network, PID, IPC, CPU and memory allocation and which can be
created using the Control Group and Namespace features included in the Linux
kernel.
.
This package contains a few binaries and security profiles required by
all liblxc users.
Homepage: https://linuxcontainers.org
Package: info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 585
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.5.0.dfsg.1-2
Replaces: texinfo (<< 4.7-2)
Provides: info-browser
Depends: libc6 (>= 2.15), libtinfo5 (>= 6), install-info
Suggests: texinfo-doc-nonfree
Description: Standalone GNU Info documentation browser
The Info file format is an easily-parsable representation for online
documents. This program allows you to view Info documents, like the
ones stored in /usr/share/info.
.
Much of the software in Debian comes with its online documentation in
the form of Info files, so it is most likely you will want to install it.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Package: libapt-pkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 214
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.1.33build1
Depends: perl-base (>= 5.26.1-2ubuntu1), perlapi-5.26.1, libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: Perl interface to libapt-pkg
A Perl interface to APT's libapt-pkg which provides modules for configuration
file/command line parsing, version comparison, inspection of the binary
package cache and source package details.
Original-Maintainer: Brendan O'Dea <bod@debian.org>
Package: python3-rfc3339
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyrfc3339
Version: 1.0-4
Depends: python3-tz, python3:any (>= 3.3.2-2~)
Description: parser and generator of RFC 3339-compliant timestamps (Python 3)
pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python
datetime.datetime objects.
.
This is the Python 3 module.
Original-Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/pyRFC3339
Package: libmagickcore-6.q16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.7.4+dfsg-16ubuntu6.15
Depends: libbz2-1.0, libc6 (>= 2.14), libfftw3-double3 (>= 3.3.5), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:3.3.1), libgomp1 (>= 4.9), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.6), liblzma5 (>= 5.1.1alpha+20120614), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, gsfonts
Suggests: libmagickcore-6.q16-3-extra
Description: low-level image manipulation library -- quantum depth Q16
The MagickCore API is a low-level interface between the C programming language
and the ImageMagick image processing libraries and is recommended for
wizard-level programmers only. Unlike the MagickWand C API which uses only a
few opaque types and accessors, with MagickCore you almost exclusively access
the structure members directly.
.
This package contains the C libraries needed to run executables that make
use of MagickCore.
.
This version of libmagickcore is compiled for a channel
depth of 16 bits (Q16).
Homepage: http://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Package: libharfbuzz-icu0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 1.7.2-1ubuntu1
Depends: libc6 (>= 2.4), libharfbuzz0b (>= 0.9.4), libicu60 (>= 60.1-1~)
Description: OpenType text shaping engine ICU backend
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains the ICU backend.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: composer
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1820
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.6.3-1
Depends: php-cli, php-common, php-json-schema, php-composer-ca-bundle (>= 1.0), php-composer-ca-bundle (<< 2~~), php-composer-semver (>= 1.0), php-composer-semver (<< 2~~), php-composer-spdx-licenses (>= 1.2), php-composer-spdx-licenses (<< 2~~), jsonlint (>= 1.4), jsonlint (<< 2~~), php-symfony-console, php-symfony-finder, php-symfony-process, php-symfony-filesystem, php-cli-prompt (>= 1.0), php-cli-prompt (<< 2~~), php-psr-log (>= 1.0), php-psr-log (<< 2~~)
Recommends: git
Suggests: fossil, mercurial, subversion, php-zip
Description: dependency manager for PHP
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
.
It behaves like Bundler (Ruby), npm (Node), etc.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://getcomposer.org/
Package: linux-modules-5.3.0-1019-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64309
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1019.21~18.04.1
Config-Version: 5.3.0-1019.21~18.04.1
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: tex-common
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 162
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 6.09
Replaces: dvipdfmx, tetex-base (<= 3.0-10)
Depends: ucf
Pre-Depends: dpkg (>= 1.16.1)
Suggests: debhelper (>= 9)
Breaks: alqalam (<= 0.2-5), cm-super (<= 0.3.4-4), cm-super-minimal (<= 0.3.4-7), context-doc-nonfree (<= 2012.06.27-1), gregoriotex (<= 2.0-1.1), itrans (<= 5.3-10), jadetex (<= 3.13-12), ko.tex-base (<= 0.1.0+20071012-1), ko.tex-extra (<= 0.1.0+20071012-1), latex-cjk-chinese (<< 4.8.2+git20111216-2), latex-cjk-chinese-arphic-bkai00mp (<= 1.21+nmu1), latex-cjk-chinese-arphic-bsmi00lp (<= 1.21+nmu1), latex-cjk-chinese-arphic-gbsn00lp (<= 1.21+nmu1), latex-cjk-chinese-arphic-gkai00mp (<= 1.21+nmu1), latex-cjk-japanese-wadalab (<= 0.20050817-15), latex-cjk-thai (<= 4.8.2+git20111216-1), latex-fonts-sipa-arundina (<= 0.2.0-1), latex-fonts-thai-tlwg (<= 1:0.5.0-1), latex-sanskrit (<= 2.2-8), lmodern (<= 2.004.1-3.1), luatex (<< 0.70.1), musixtex (<= 1:0.115-2), scalable-cyrfonts-tex (<= 4.15), tex-gyre (<= 2.004.1-2.1), texlive-base (<< 2015), texlive-binaries (<< 2015), texlive-common (<< 2010), texlive-lang-arab (<< 2012), thailatex (<< 2013), tipa (<= 2:1.3-15)
Conflicts: context (<= 2011.05.18.20110627-1), tetex-base (<< 2007), texlive-common (<< 2009)
Conffiles:
/etc/texmf/texmf.d/00debian.cnf ca40c66f144b4bafc3e59a2dd32ecb9c
/etc/texmf/web2c/mktex.cnf 9c342b3465afe4c13049c55218e23eaf
Description: common infrastructure for building and installing TeX
This package contains a number of scripts and common configuration
files that are needed to install a TeX System.
.
It also contains debhelper-like programs useful for building TeX
packages.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Package: php-composer-ca-bundle
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1.0-1
Depends: ca-certificates, php-common
Description: utility library to find a path to the system CA bundle
The ca-bundle library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/ca-bundle
Package: xfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3876
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.9.0+nmu1ubuntu2
Replaces: xfsdump (<< 3.0.0)
Provides: fsck-backend
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libreadline5 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsdump, acl, attr, quota
Breaks: xfsdump (<< 3.0.0)
Description: Utilities for managing the XFS filesystem
A set of commands to use the XFS filesystem, including mkfs.xfs.
.
XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
support large files and large filesystems, extended attributes,
variable block sizes, is extent based, and makes extensive use of
Btrees (directories, extents, free space) to aid both performance
and scalability.
.
Refer to the documentation at http://oss.sgi.com/projects/xfs/
for complete details.
Homepage: http://xfs.org/
Original-Maintainer: XFS Development Team <linux-xfs@vger.kernel.org>
Package: libarchive-zip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 268
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.60-1ubuntu0.1
Depends: perl
Description: Perl module for manipulation of ZIP archives
The Archive::Zip module allows a Perl program to create, manipulate,
read, and write Zip archive files.
.
Zip archives can be created, or you can read from existing zip files.
Once created, they can be written to files, streams, or strings.
.
Members can be added, removed, extracted, replaced, rearranged, and
enumerated. They can also be renamed or have their dates, comments,
or other attributes queried or modified. Their data can be
compressed or uncompressed as needed. Members can be created from
members in existing Zip files, or from existing directories, files,
or strings.
Homepage: https://metacpan.org/release/Archive-Zip
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: x11proto-core-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2018.4-4
Depends: x11proto-dev
Description: transitional dummy package
This is a transitional dummy package, it can be safely removed.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org/
Package: byobu
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 650
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 5.125-0ubuntu1
Replaces: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Provides: byobu-extras, screen-profiles, screen-profiles-extras
Depends: debconf (>= 0.5) | debconf-2.0, python3:any (>= 3.3.2-2~), gettext-base, net-tools, python3, python3-newt, tmux (>= 1.5), gawk
Recommends: pastebinit, sensible-utils, run-one
Suggests: apport, ccze, gnome-terminal | xterm, gnupg, lsb-release, po-debconf, screen, speedometer, ttf-ubuntu-font-family (>= 0.80-0ubuntu1~medium), update-notifier-common, vim, wireless-tools
Breaks: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Enhances: screen
Conffiles:
/etc/byobu/backend 9f19a0102abedf38ec2174039d0d0d6d
/etc/byobu/socketdir 774a796c75a097ffd7c5c7492cb39568
/etc/profile.d/Z97-byobu.sh d3fffff67e2a324cc1111f05cb9cc53b
Description: text window manager, shell multiplexer, integrated DevOps environment
Byobu is Ubuntu's powerful text-based window manager, shell multiplexer, and
integrated DevOps environment.
.
Using Byobu, you can quickly create and move between different windows
over a single SSH connection or TTY terminal, split each of those windows into
multiple panes, monitor dozens of important statistics about your system,
detach and reattach to sessions later while your programs continue to run in
the background.
Homepage: http://byobu.org
Package: dh-autoreconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 17
Depends: perl, debhelper, autoconf, automake, autopoint, libtool (>= 2.4.2)
Breaks: dpatch (<< 2.0.38+nmu1~), quilt (<< 0.63-8.2~)
Enhances: cdbs, debhelper
Description: debhelper add-on to call autoreconf and clean up after the build
dh-autoreconf provides a debhelper sequence addon named 'autoreconf' and two
commands, dh_autoreconf and dh_autoreconf_clean.
.
The dh_autoreconf command creates a list of the files and their checksums,
calls autoreconf and then creates a second list for the new files.
.
The dh_autoreconf_clean command compares these two lists and removes all
files which have been added or changed (files may be excluded if needed).
.
For CDBS users, a rule is provided to call the dh-autoreconf programs at
the right time.
Original-Maintainer: Julian Andres Klode <jak@debian.org>
Package: doxygen-latex
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: doxygen
Version: 1.8.13-10
Depends: doxygen (>= 1.8.13-10), texlive-extra-utils, texlive-latex-extra, texlive-latex-recommended, texlive-font-utils, ghostscript, texlive-fonts-recommended, cm-super-minimal
Description: Documentation system for C, C++, Java, Python and other languages
Doxygen is a documentation system for C, C++, Java, Objective-C, Python, IDL
and to some extent PHP, C#, and D. It can generate an on-line class browser
(in HTML) and/or an off-line reference manual (in LaTeX) from a set of
documented source files.
.
This dependency package adds dependencies for all LaTeX packages required
to build documents using the default stylesheet.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://www.stack.nl/~dimitri/doxygen/
Package: libcryptsetup12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 375
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.0.2-1ubuntu1.1
Depends: libgpg-error0 (>= 1.10-0.1), libargon2-0 (>= 0~20160406~), libc6 (>= 2.15), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.8.0), libjson-c3 (>= 0.11), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Package: libxdamage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdamage
Version: 1:1.1.4-3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 damaged region extension library
libXdamage provides an X Window System client interface to the DAMAGE
extension to the X protocol.
.
The Damage extension provides for notification of when on-screen regions have
been 'damaged' (altered).
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdamage
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org
Package: libmspack0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.6-3ubuntu0.3
Depends: libc6 (>= 2.14)
Description: library for Microsoft compression formats (shared library)
The purpose of libmspack is to provide both compression and decompression of
some loosely related file formats used by Microsoft. The intention is to
support all of the following formats: COMPRESS.EXE [SZDD],
Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/
Original-Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Package: dosfstools
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 211
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.1-1
Depends: libc6 (>= 2.14), libudev1 (>= 183)
Description: utilities for making and checking MS-DOS FAT filesystems
The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
respectively make and check MS-DOS FAT filesystems.
Original-Maintainer: Andreas Bombe <aeb@debian.org>
Homepage: https://github.com/dosfstools/dosfstools
Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 525
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4.29-1ubuntu4.27
Replaces: apache2.2-bin, apache2.2-common
Provides: httpd, httpd-cgi
Depends: lsb-base, procps, perl, mime-support, apache2-bin (= 2.4.29-1ubuntu4.27), apache2-utils (= 2.4.29-1ubuntu4.27), apache2-data (= 2.4.29-1ubuntu4.27), perl:any
Pre-Depends: dpkg (>= 1.17.14)
Recommends: ssl-cert
Suggests: www-browser, apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, ufw
Conflicts: apache2.2-bin, apache2.2-common
Conffiles:
/etc/apache2/apache2.conf 20589b50379161ebc8cb35f761af2646
/etc/apache2/conf-available/charset.conf 46ea15bcd82c11ea0973aa8842b1dc56
/etc/apache2/conf-available/localized-error-pages.conf cfd0ae5e448102514efe8b97181d19c9
/etc/apache2/conf-available/other-vhosts-access-log.conf 60d5d57995317aedb02bd2a20b366717
/etc/apache2/conf-available/security.conf f2e736bb593323988d1ebdabee67729f
/etc/apache2/conf-available/serve-cgi-bin.conf 21abde7dadc1020140b9ab796d06fd29
/etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
/etc/apache2/magic a6d370833a02f53db6a0a30800704994
/etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
/etc/apache2/mods-available/actions.conf 8736884dbc596bcfdbb392409c96fde5
/etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
/etc/apache2/mods-available/alias.conf c6e9f26152898c38e58211c8b362d5c3
/etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
/etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
/etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
/etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
/etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
/etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
/etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
/etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
/etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
/etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
/etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
/etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
/etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
/etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
/etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
/etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
/etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
/etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
/etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
/etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
/etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
/etc/apache2/mods-available/autoindex.conf bfba7d77669e02b869b92e98215d58fc
/etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
/etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
/etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
/etc/apache2/mods-available/cache_disk.conf b716cf836c9f00dae0366a39f511b76d
/etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
/etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
/etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
/etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
/etc/apache2/mods-available/cgid.conf e8a2836392051bde889cf9c137058273
/etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
/etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
/etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
/etc/apache2/mods-available/dav.load ed469867552a1145b8c3ffa5780ff83e
/etc/apache2/mods-available/dav_fs.conf 162db96239f13b5416f369b6306d9db6
/etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
/etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
/etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
/etc/apache2/mods-available/deflate.conf c0df9dcfde4448823efb0c0dd3b0d749
/etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
/etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
/etc/apache2/mods-available/dir.conf fe4bc5fa3b3cc7a241fe57f8fabc55a1
/etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
/etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
/etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
/etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
/etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
/etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
/etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
/etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
/etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
/etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
/etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
/etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
/etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
/etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
/etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
/etc/apache2/mods-available/info.conf 4a4aa21e0bb474d420c9a3e1c3320677
/etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
/etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
/etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
/etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
/etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
/etc/apache2/mods-available/ldap.conf 344968a263507c1991a160427e51ed9c
/etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
/etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
/etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
/etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
/etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
/etc/apache2/mods-available/mime.conf 59b91eabeee56dc73e9bfeab93422911
/etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
/etc/apache2/mods-available/mime_magic.conf ebeaf79afde03c805e795bb51eec155f
/etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
/etc/apache2/mods-available/mpm_event.conf d868a76835101a66be2863362ef9f81a
/etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
/etc/apache2/mods-available/mpm_prefork.conf 26e539a16e51c4feddd2eedc568692e6
/etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
/etc/apache2/mods-available/mpm_worker.conf 2673a5a3f030bfb704bee034ce3a183c
/etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
/etc/apache2/mods-available/negotiation.conf 443398efdd41085bc1a70047f6e61c95
/etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
/etc/apache2/mods-available/proxy.conf b516d96935974214588d525edd7aed6d
/etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
/etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
/etc/apache2/mods-available/proxy_balancer.conf 5e9113f9556e17c0fec6c81232651791
/etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
/etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
/etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
/etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
/etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
/etc/apache2/mods-available/proxy_ftp.conf dd9beba82c2838bcfd51a05dfb540929
/etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
/etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
/etc/apache2/mods-available/proxy_html.conf 5b60af3b1796f2db4b5f7a8a7941f1bc
/etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
/etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
/etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
/etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
/etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
/etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
/etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
/etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
/etc/apache2/mods-available/reqtimeout.conf 40b45155afb3d14263d12e6fc4a98513
/etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
/etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
/etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
/etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
/etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
/etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
/etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
/etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
/etc/apache2/mods-available/setenvif.conf 533f5f92761c2c24d6820f1d7d1c45ad
/etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
/etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
/etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
/etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
/etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
/etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
/etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
/etc/apache2/mods-available/ssl.conf 6c30f44f4e2ad6bc51c917294aa8e34b
/etc/apache2/mods-available/ssl.load 838b292226d2da6ceb3f1c793696ca12
/etc/apache2/mods-available/status.conf 5d3689f109baf304af4f145249ca6326
/etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
/etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
/etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
/etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
/etc/apache2/mods-available/userdir.conf 3a3142e84136336db8b940553a076983
/etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
/etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
/etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
/etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
/etc/apache2/ports.conf a961f23471d985c2b819b652b7f64321
/etc/apache2/sites-available/000-default.conf f3066f67070ab9b1ad9bab81ca05330a
/etc/apache2/sites-available/default-ssl.conf 801f4c746a88b4228596cb260a4220c4
/etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
/etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
/etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
/etc/init.d/apache2 9d22fb30358e61a6f190a0d09c5120bf
/etc/logrotate.d/apache2 15238daf142d206ffedd128f9b2d78ce
/etc/ufw/applications.d/apache2-utils.ufw.profile f8d4fd920e598ceb4379613c6261f6af
Description: Apache HTTP Server
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
Installing this package results in a full installation, including the
configuration files, init scripts and support scripts.
Homepage: http://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: linux-modules-5.4.0-1071-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69675
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1071.76~18.04.1
Config-Version: 5.4.0-1071.76~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 23.1-1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Description: utilities that use the proc file system
This package contains miscellaneous utilities that use the proc FS:
.
- fuser: identifies processes that are using files or sockets.
- killall: kills processes by name (e.g. "killall -HUP named").
- peekfd: shows the data traveling over a file descriptor.
- pstree: shows currently running processes as a tree.
- prtstat: print the contents of /proc/<pid>/stat
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://psmisc.sf.net/
Package: linux-image-5.4.0-1028-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9077
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1028.29~18.04.1
Config-Version: 5.4.0-1028.29~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1028-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1028-aws
Conflicts: linux-image-unsigned-5.4.0-1028-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2n-1ubuntu5.13
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 228
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.44
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
These are the canonical master copies of the user database files
(/etc/passwd and /etc/group), containing the Debian-allocated user and
group IDs. The update-passwd tool is provided to keep the system databases
synchronized with these master files.
Package: liblqr-1-0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 733
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblqr
Version: 0.4.2-2.1
Provides: liblqr-dev
Depends: liblqr-1-0 (= 0.4.2-2.1)
Conflicts: liblqr-dev
Description: converts plain array images into multi-size representation (developments files)
The LiquidRescale (lqr) library provides a C/C++ API for performing
non-uniform resizing of images by the seam-carving technique.
.
The library takes images in plain array format as input and converts
them to a multi-size representation.
.
Following is a list of features:
.
* Areas in the image can be marked for preservation or discard
* Once the image has been fully processed, the scaling can be done
in real-time. In fact, the information can be saved and read out
later without any further processing
* The resizing is done with a single function which automatically
performs all the necessary operations; it can also work in
successive steps without wasting computational time
* Possibility to tune the carving operation by letting the seams be
less connected, or more rigid, or both
* Can export and import the visibility map (the seams)
* Other images can be attached and undergo the same carving process
as the parent image
* The automatic feature detection algorithm can be tuned by
selecting among different energy gradient functions
* Reports progress through a customizable interface
* A signalling system permits one to cleanly handle errors
.
The library implements the algorithm described in the paper "Seam
Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
Shamir, which can be found at
http://www.faculty.idc.ac.il/arik/imret.pdf
.
This package contains the development files.
Original-Maintainer: Bernd Zeimetz <bzed@debian.org>
Homepage: http://liblqr.wikidot.com/
Package: linux-headers-4.15.0-1021-aws
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11019
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1021.21
Provides: linux-headers, linux-headers-3.0
Depends: linux-aws-headers-4.15.0-1021, libc6 (>= 2.14), libelf1 (>= 0.142), libssl1.1 (>= 1.1.0)
Description: Linux kernel headers for version 4.15.0 on 64 bit x86 SMP
This package provides kernel header files for version 4.15.0 on
64 bit x86 SMP.
.
This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-4.15.0-1021/debian.README.gz for details.
Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.40.20-2ubuntu0.2
Depends: libc6 (>= 2.4), libcairo2 (>= 1.10.0), libcroco3 (>= 0.6.2), libfontconfig1 (>= 2.12), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.36.0), libpangocairo-1.0-0 (>= 1.36.0), libpangoft2-1.0-0 (>= 1.37.2), libxml2 (>= 2.8.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package contains the runtime library, necessary to run
applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.30.0-1ubuntu1
Depends: libc6 (>= 2.14)
Description: library implementing HTTP/2 protocol (shared library)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs a shared library.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>
Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.8.3~dfsg-1ubuntu0.1
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
Underscore is a utility-belt library for JavaScript that provides a lot
of the functional programming support that you would expect in
Prototype.js (or Ruby), but without extending any of the built-in
JavaScript objects. It's the tie to go along with jQuery's tux.
.
Underscore provides 60-odd functions that support both the usual
functional suspects: map, select, invoke - as well as more specialized
helpers: function binding, javascript templating, deep equality
testing, and so on. It delegates to built-in functions, if present, so
modern browsers will use the native implementations of forEach, map,
reduce, filter, every, some and indexOf.
Homepage: http://underscorejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: linux-aws-5.4-headers-5.4.0-1088
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71102
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1088.96~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1088/debian.README.gz for details
Package: python3-serial
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 367
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyserial
Version: 3.4-2
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-wxgtk3.0 | python3-wxgtk
Description: pyserial - module encapsulating access for the serial port
This module encapsulates the access for the serial port. It provides
back-ends for standard Python running on Windows, Linux, BSD (possibly
any POSIX compliant system). The module named "serial" automatically
selects the appropriate back-end.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://pyserial.sourceforge.net/
Package: node-delayed-stream
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.5-1
Depends: nodejs
Description: Buffer stream events for later handling - module for Node.js
node-delayed-stream can delay stream responses, and can be used
to combine streams one after another.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/felixge/node-delayed-stream
Package: liblcms2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 9071
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.9-1ubuntu0.1
Replaces: liblcms-dev
Provides: liblcms-dev
Depends: liblcms2-2 (= 2.9-1ubuntu0.1)
Conflicts: liblcms-dev
Description: Little CMS 2 color management library development headers
LittleCMS 2 intends to be a small-footprint color management engine, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC) of color management. Little CMS 2 is a full
implementation of ICC specification 4.2 plus all addendums. It fully supports
all V2 and V4 profiles, including abstract, devicelink and named color
profiles.
.
This package contains the development headers used for building software that
uses Little CMS.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <tweber@debian.org>
Package: liblz4-1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 0.0~r131-2ubuntu3.1
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
LZ4 is a very fast lossless compression algorithm, providing compression speed
at 400 MB/s per core, scalable with multi-cores CPU. It also features an
extremely fast decoder, with speed in multiple GB/s per core, typically
reaching RAM speed limits on multi-core systems.
.
This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Package: texlive-latex-extra
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 49042
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-extra
Version: 2017.20180305-2
Replaces: luasseq (<< 2015), texlive-htmlxml (<< 2017), texlive-humanities (<< 2017.20170620), texlive-luatex (<< 2017.20171022), texlive-science (<< 2017.20180125)
Depends: tex-common (>= 6), preview-latex-style, python, texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437), texlive-latex-recommended (>= 2017.20170628), texlive-pictures (>= 2017.20170628)
Recommends: texlive-fonts-recommended, texlive-plain-generic
Suggests: python-pygments, icc-profiles, libfile-which-perl, libspreadsheet-parseexcel-perl, texlive-latex-extra-doc
Breaks: dblatex (<< 0.3.8-2~), texlive-base (<< 2017.20170628), texlive-humanities (<< 2017.20170620), texlive-latex-recommended (<< 2017.20171003), texlive-luatex (<< 2017.20171022), texlive-pstricks (<< 2017.20171031), texlive-science (<< 2017.20180125)
Description: TeX Live: LaTeX additional packages
A very large collection of add-on packages for LaTeX.
.
This package includes the following CTAN packages:
.
2up -- Macros to print two-up
.
ESIEEcv -- Curriculum vitae for French use
.
GS1 -- Typeset EAN barcodes using TeX rules, only
.
HA-prosper -- Patches and improvements for prosper
.
Tabbing -- Tabbing with accented letters
.
a0poster -- Support for designing posters on large paper
.
a4wide -- "Wide" a4 layout
.
a5comb -- Support for a5 paper sizes
.
abraces -- Asymmetric over-/underbraces in maths
.
abstract -- Control the typesetting of the abstract environment
.
achemso -- Support for American Chemical Society journal submissions
.
acro -- Typeset acronyms
.
acronym -- Expand acronyms at least once
.
acroterm -- Manage and index acronyms and terms
.
actuarialangle -- Angle symbol denoting a duration in actuarial and
financial notation
.
actuarialsymbol -- Actuarial symbols of life contingencies and financial
mathematics
.
addfont -- easier use of fonts without LaTeX support
.
addlines -- A user-friendly wrapper around \enlargethispage
.
adjmulticol -- Adjusting margins for multicolumn and single column output
.
adjustbox -- Graphics package-alike macros for "general" boxes
.
adrconv -- BibTeX styles to implement an address database
.
advdate -- Print a date relative to "today"
.
akktex -- A collection of packages and classes
.
akletter -- Comprehensive letter support
.
alertmessage -- Alert messages for LaTeX
.
alnumsec -- Alphanumeric section numbering
.
alterqcm -- Multiple choice questionnaires in two column tables
.
altfont -- Alternative font handling in LaTeX
.
amsaddr -- Alter the position of affiliations in amsart
.
animate -- Create PDF animations from graphics files and inline graphics
.
anonchap -- Make chapters be typeset like sections
.
answers -- Setting questions (or exercises) and answers
.
anyfontsize -- Select any font size in LaTeX
.
appendix -- Extra control of appendices
.
appendixnumberbeamer -- Manage frame numbering in appendixes in beamer
.
apptools -- Tools for customising appendices
.
arcs -- Draw arcs over and under text
.
arrayjobx -- Array data structures for (La)TeX
.
arraysort -- Sort arrays (or portions of them)
.
arydshln -- Draw dash-lines in array/tabular
.
asciilist -- Environments AsciiList and AsciiDocList for prototyping nested
lists in LaTeX.
.
assignment -- A class file for typesetting homework and lab assignments
.
assoccnt -- Associate counters, making them step when a master steps
.
attachfile -- Attach arbitrary files to a PDF document
.
aurl -- Extends the hyperref package with a mechanism for hyperlinked URLs
abbreviated with prefixes
.
authoraftertitle -- Make author, etc., available after \maketitle
.
authorarchive -- Adds self-archiving information to scientific papers
.
authorindex -- Index citations by author names
.
autonum -- Automatic equation references
.
autopdf -- Conversion of graphics to pdfLaTeX-compatible formats
.
avremu -- An 8-Bit Microcontroller Simulator written in LaTeX
.
background -- Placement of background material on pages of a document
.
bankstatement -- A LaTeX class for bank statements based on csv data
.
bashful -- Invoke bash commands from within LaTeX
.
basicarith -- Macros for typesetting basic arithmetic
.
bchart -- Draw simple bar charts in LaTeX
.
beamer2thesis -- Thesis presentations using beamer
.
beameraudience -- Assembling beamer frames according to audience
.
beamercolorthemeowl -- A flexible beamer color theme to maximize visibility
.
beamerdarkthemes -- Dark color themes for beamer
.
beamerposter -- Extend beamer and a0poster for custom sized posters
.
beamersubframe -- Reorder frames in the PDF file
.
beamertheme-cuerna -- A beamer theme with 4 colour palettes.
.
beamertheme-detlevcm -- A beamer theme designed for use in the University of
Leeds
.
beamertheme-epyt -- A simple and clean theme for LaTeX beamer class
.
beamertheme-metropolis -- A modern LaTeX beamer theme
.
beamertheme-phnompenh -- A simple beamer theme
.
beamertheme-saintpetersburg -- A beamer theme that incorporates colours and
fonts of Saint Petersburg State University
.
beamertheme-upenn-bc -- Beamer themies for Boston College and the University
of Pennsylvania
.
beamerthemejltree -- Contributed beamer theme
.
beamerthemenirma -- A Beamer theme for academic presentations
.
beton -- Use Concrete fonts
.
bewerbung -- Typesetting job application
.
bez123 -- Support for Bezier curves
.
bezos -- Packages by Javier Bezos
.
bhcexam -- An exam class designed for Mathematics Teachers in China
.
bibletext -- Insert Bible passages by their reference
.
bigfoot -- Footnotes for critical editions
.
bigints -- Writing big integrals
.
biochemistry-colors -- Colors used to display amino acids, nucleotides,
sugars or atoms in biochemistry
.
bizcard -- Typeset business cards
.
blindtext -- Producing 'blind' text for testing
.
blkarray -- Extended array and tabular
.
block -- A block letter style for the letter class
.
blowup -- Upscale or downscale all pages of a document
.
bnumexpr -- Extends eTeX's \numexpr...\relax construct to big integers
.
boites -- Boxes that may break across pages
.
bold-extra -- Use bold small caps and typewriter fonts
.
bookcover -- A class for book covers and dust jackets
.
bookest -- Extended book class
.
booklet -- Aids for printing simple booklets
.
boolexpr -- A boolean expression evaluator and a switch command
.
bophook -- Provides an At-Begin-Page hook
.
boxedminipage -- A package for producing framed minipages
.
boxedminipage2e -- Framed minipages of a specified total width (text and
frame combined)
.
boxhandler -- Flexible Captioning and Deferred Box/List Printing
.
bracketkey -- Produce bracketed identification keys
.
braket -- Dirac bra-ket and set notations
.
breakurl -- Line-breakable \url-like links in hyperref when compiling via
dvips/ps2pdf
.
bullcntr -- Display list item counter as regular pattern of bullets
.
bussproofs -- Proof trees in the style of the sequent calculus
.
bxcalc -- Extend the functionality of the calc package
.
bxdpx-beamer -- Dvipdfmx extras for use with beamer
.
bxdvidriver -- Enables specifying a driver option effective only in DVI
output
.
bxenclose -- Enclose the document body with some pieces of code
.
bxnewfont -- Enhanced \newfont command
.
bxpapersize -- Synchronize output paper size with layout paper size
.
bxpdfver -- Specify version and compression level of output PDF files
.
bxtexlogo --
.
calcage -- Calculate the age of something, in years
.
calctab -- Language for numeric tables
.
calculator -- Use LaTeX as a scientific calculator
.
calrsfs -- Copperplate calligraphic letters in LaTeX
.
cals -- Multipage tables with wide range of features
.
calxxxx-yyyy -- Print a calendar for a group of years
.
cancel -- Place lines through maths formulae
.
canoniclayout -- Create canonical page layouts with memoir
.
capt-of -- Captions on more than floats
.
captcont -- Retain float number across several floats
.
captdef -- Declare free-standing \caption commands
.
carbohydrates -- Carbohydrate molecules with chemfig
.
cases -- Numbered cases environment
.
casyl -- Typeset Cree/Inuktitut in Canadian Aboriginal Syllabics
.
catchfilebetweentags -- Catch text delimited by docstrip tags
.
catechis -- Macros for typesetting catechisms
.
catoptions -- Preserving and recalling standard catcodes
.
cbcoptic -- Coptic fonts and LaTeX macros for general usage and for
philology
.
ccaption -- Continuation headings and legends for floats
.
cclicenses -- Typeset Creative Commons licence logos
.
cd -- Typeset CD covers
.
cd-cover -- Typeset CD covers
.
cdpbundl -- Business letters in the Italian style
.
cellspace -- Ensure minimal spacing of table cells
.
censor -- Facilities for controlling restricted text in a document
.
changebar -- Generate changebars in LaTeX documents
.
changelayout -- Change the layout of individual pages and their text
.
changepage -- Margin adjustment and detection of odd/even pages
.
changes -- Manual change markup
.
chappg -- Page numbering by chapter
.
chapterfolder -- Package for working with complicated folder structures
.
cheatsheet -- A simple cheatsheet class
.
chet -- LaTeX layout inspired by harvmac
.
chextras -- A companion package for the Swiss typesetter
.
childdoc -- Directly compile \include'd child documents
.
chkfloat -- Warn whenever a float is placed "to far away"
.
chletter -- Class for typesetting letters to Swiss rules
.
chngcntr -- Change the resetting of counters
.
chronology -- Provides a horizontal timeline
.
circ -- Macros for typesetting circuit diagrams
.
classics -- Cite classic works
.
classpack -- XML mastering for LaTeX classes and packages
.
clefval -- Key/value support with a hash
.
cleveref -- Intelligent cross-referencing
.
clipboard -- Copy and paste into and across documents
.
clock -- Graphical and textual clocks for TeX and LaTeX
.
cloze -- A LuaLaTeX package for creating cloze texts
.
cmdstring -- Get command name reliably
.
cmdtrack -- Check used commands
.
cmsd -- Interfaces to the CM Sans Serif Bold fonts
.
cnltx -- LaTeX tools and documenting facilities
.
cntformats -- A different way to read counters
.
cntperchap -- Store counter values per chapter
.
codedoc -- LaTeX code and documentation in LaTeX-format file
.
codepage -- Support for variant code pages
.
codesection -- Provides an environment that may be conditionally included
.
collcell -- Collect contents of a tabular cell as argument to a macro
.
collectbox -- Collect and process macro arguments as boxes
.
colordoc -- Coloured syntax highlights in documentation
.
colorinfo -- Retrieve colour model and values for defined colours
.
coloring -- Define missing colors by their names
.
colorspace -- Provides PDF color spaces
.
colortab -- Shade cells of tables and halign
.
colorwav -- Colours by wavelength of visible light
.
colorweb -- Extend the color package colour space
.
colourchange -- colourchange
.
combelow -- Typeset "comma-below" letters, as in Romanian
.
combine -- Bundle individual documents into a single document
.
comma -- Formats a number by inserting commas
.
commado -- Expandable iteration on comma-separated and filename lists
.
comment -- Selectively include/exclude portions of text
.
concepts -- Keeping track of formal 'concepts' for a particular field
.
concprog -- Concert programmes
.
constants -- Automatic numbering of constants
.
continue -- Prints 'continuation' marks on recto pages of multipage
documents
.
contour -- Print a coloured contour around text
.
contracard -- Generate calling cards for dances
.
conv-xkv -- Create new key-value syntax
.
cooking -- Typeset recipes
.
cooking-units -- Typeset and convert units for cookery books and recipes
.
cool -- COntent-Oriented LaTeX
.
coollist -- Manipulate COntent Oriented LaTeX Lists
.
coolstr -- String manipulation in LaTeX
.
coolthms -- Reference items in a theorem environment
.
cooltooltips -- Associate a pop-up window and tooltip with PDF hyperlinks
.
coordsys -- Draw cartesian coordinate systems
.
copyedit -- Copyediting support for LaTeX documents
.
copyrightbox -- Provide copyright notices for images in a document
.
coseoul -- Context sensitive outline elements
.
counttexruns -- Count compilations of a document
.
courseoutline -- Prepare university course outlines
.
coursepaper -- Prepare university course papers
.
coverpage -- Automatic cover page creation for scientific papers
.
cprotect -- Allow verbatim, etc., in macro arguments
.
crbox -- Boxes with crossed corners
.
crossreference -- Crossreferences within documents
.
crossreftools -- Expandable extraction of cleveref data
.
csquotes -- Context sensitive quotation facilities
.
css-colors -- Named colors for web-safe design
.
csvsimple -- Simple CSV file processing
.
cuisine -- Typeset recipes
.
currency -- Format currencies in a consistent way
.
currfile -- Provide file name and path of input files
.
currvita -- Typeset a curriculum vitae
.
cutwin -- Cut a window in a paragraph, typeset material in it
.
cv -- A package for creating a curriculum vitae
.
cv4tw -- LaTeX CV class, with extended details
.
cweb-latex -- A LaTeX version of CWEB
.
cyber -- Annotate compliance with cybersecurity requirements
.
cybercic -- "Controls in Contents" for the cyber package
.
dashbox -- Draw dashed boxes
.
dashrule -- Draw dashed rules
.
dashundergaps -- Underline with dotted or dashed lines
.
dataref -- Manage references to experimental data
.
datatool -- Tools to load and manipulate data
.
dateiliste -- Extensions of the \listfiles concept
.
datenumber -- Convert a date into a number and vice versa
.
datetime -- Change format of \today with commands for current time
.
datetime2 -- Formats for dates, times and time zones
.
datetime2-bahasai -- Bahasai language module for the datetime2 package
.
datetime2-basque -- Basque language module for the datetime2 package
.
datetime2-breton -- breton language module for the datetime2 package
.
datetime2-bulgarian -- Bulgarian language module for the datetime2 package
.
datetime2-catalan -- catalan language module for the datetime2 package
.
datetime2-croatian -- croatian language module for the datetime2 package
.
datetime2-czech -- czech language module for the datetime2 package
.
datetime2-danish -- danish language module for the datetime2 package
.
datetime2-dutch -- dutch language module for the datetime2 package
.
datetime2-en-fulltext -- English Full Text styles for the datetime2 package
.
datetime2-english -- English language module for the datetime2 package
.
datetime2-esperanto -- Esperanto language module for the datetime2 package
.
datetime2-estonian -- Estonian language module for the datetime2 package
.
datetime2-finnish -- Finnish language module for the datetime2 package
.
datetime2-french -- French language module for the datetime2 package
.
datetime2-galician -- galician language module for the datetime2 package
.
datetime2-german -- German language module for the datetime2 package
.
datetime2-greek -- Greek language module for the datetime2 package
.
datetime2-hebrew -- Hebrew language module for the datetime2 package
.
datetime2-icelandic -- Icelandic language module for the datetime2 package
.
datetime2-irish -- Irish Gaelic Language Module for the datetime2 Package
.
datetime2-italian -- Italian language module for the datetime2 package
.
datetime2-it-fulltext -- Italian full text styles for the datetime2 package
.
datetime2-latin -- Latin language module for the datetime2 package
.
datetime2-lsorbian -- Lower Sorbian language module for the datetime2
package
.
datetime2-magyar -- magyar language module for the datetime2 package
.
datetime2-norsk -- Norsk language module for the datetime2 package
.
datetime2-polish -- polish language module for the datetime2 package
.
datetime2-portuges -- Portuguese language module for the datetime2 package
.
datetime2-romanian -- Romanian language module for the datetime2 package
.
datetime2-russian -- russian language module for the datetime2 package
.
datetime2-samin -- Northern Sami language module for the datetime2 package
.
datetime2-scottish -- Scottish Gaelic Language Module for the datetime2
Package
.
datetime2-serbian -- serbian language module for the datetime2 package
.
datetime2-slovak -- slovak language module for the datetime2 package
.
datetime2-slovene -- slovene language module for the datetime2 package
.
datetime2-spanish -- Spanish language module for the datetime2 package
.
datetime2-swedish -- swedish language module for the datetime2 package
.
datetime2-turkish -- turkish language module for the datetime2 package
.
datetime2-ukrainian -- Ukrainian language module for the datetime2 package
.
datetime2-usorbian -- Upper Sorbian language module for the datetime2
package
.
datetime2-welsh -- Welsh language module for the datetime2 package
.
dblfloatfix -- Fixes for twocolumn floats
.
decimal -- LaTeX package for the English raised decimal point
.
decorule -- Decorative swelled rule using font character
.
delimtxt -- Read and parse text tables
.
denisbdoc -- A personal dirty package for documenting packages
.
diagbox -- Table heads with diagonal lines
.
diagnose -- A diagnostic tool for a TeX installation
.
dialogl -- Macros for constructing interactive LaTeX scripts
.
dichokey -- Construct dichotomous identification keys
.
dinbrief -- German letter DIN style
.
directory -- An address book using BibTeX
.
dirtytalk -- A package to typeset quotations easier
.
dlfltxb -- Macros related to "Introdktion til LaTeX"
.
dnaseq -- Format DNA base sequences
.
doclicense -- Support for putting documents under a license
.
docmfp -- Document non-LaTeX code
.
docmute -- Input files ignoring LaTeX preamble, etc
.
doctools -- Tools for the documentation of LaTeX code
.
documentation -- Documentation support for C, Java and assembler code
.
doi -- Create correct hyperlinks for DOI numbers
.
dotarrow -- Extendable dotted arrows
.
dotseqn -- Flush left equations with dotted leaders to the numbers
.
download -- Allow LaTeX to download files using an external process
.
dox -- Extend the doc package
.
dpfloat -- Support for double-page floats
.
dprogress -- LaTeX-relevant log information for debugging
.
drac -- Declare active character substitution, robustly
.
draftcopy -- Identify draft copies
.
draftfigure -- Replace figures with a white box and additional features.
.
draftwatermark -- Put a grey textual watermark on document pages
.
dtk -- Document class for the journal of DANTE
.
dtxdescribe -- Describe additional object types in dtx source files
.
dtxgallery -- A small collection of minimal DTX examples
.
ducksay -- Draw ASCII art of animals saying a specified message
.
dvdcoll -- A class for typesetting DVD archives
.
dynamicnumber -- Dynamically typeset numbers and values in LaTeX through
"symbolic links"
.
dynblocks -- A simple way to create dynamic blocks for Beamer
.
ean13isbn -- Print EAN13 for ISBN
.
easy -- A collection of easy-to-use macros
.
easy-todo -- To-do notes in a document
.
easyfig -- Simplifying the use of common figures
.
easyformat -- Add easier bolds and italics
.
easylist -- Lists using a single active character
.
easyreview -- Package to provide a way to review (or perform editorial
process) in LaTeX
.
ebezier -- Device independent picture environment enhancement
.
ecclesiastic -- Typesetting Ecclesiastic Latin
.
ecv -- A fancy Curriculum Vitae class
.
ed -- Editorial Notes for LaTeX documents
.
edmargin -- Multiple series of endnotes for critical editions
.
eemeir -- Adjust the gender of words in a document
.
efbox -- Extension of \fbox, with controllable frames and colours
.
egplot -- Encapsulate Gnuplot sources in LaTeX documents
.
elements -- Provides properties of chemical elements
.
ellipsis -- Fix uneven spacing around ellipses in LaTeX text mode
.
elmath -- Mathematics in Greek texts
.
elocalloc -- Local allocation macros for LaTeX 2015
.
elpres -- A simple class for electronic presentations
.
elzcards -- Typeset business cards, index cards and flash cards easily
.
emarks -- Named mark registers with e-TeX
.
embedall -- Embed source files into the generated PDF
.
embrac -- Upright brackets in emphasised text
.
emptypage -- Make empty pages really empty
.
emulateapj -- Produce output similar to that of APJ
.
endfloat -- Move floats to the end, leaving markers where they belong
.
endheads -- Running headers of the form "Notes to pp.xx-yy"
.
endnotes -- Place footnotes at the end
.
engpron -- Helps to type the pronunciation of English words
.
engrec -- Enumerate with lower- or uppercase Greek letters
.
enotez -- Support for end-notes
.
enumitem -- Control layout of itemize, enumerate, description
.
enumitem-zref -- Extended references to items for enumitem package
.
envbig -- Printing addresses on envelopes
.
environ -- A new interface for environments in LaTeX
.
envlab -- Addresses on envelopes or mailing labels
.
epigraph -- A package for typesetting epigraphs
.
epiolmec -- Typesetting the Epi-Olmec Language
.
eqell -- Sympathetically spaced ellipsis after punctuation
.
eqlist -- Description lists with equal indentation
.
eqnalign -- Make eqnarray behave like align
.
eqname -- Name tags for equations
.
eqparbox -- Create equal-widthed parboxes
.
errata -- Error markup for LaTeX documents
.
esami -- Typeset exams with scrambled questions and answers
.
esdiff -- Simplify typesetting of derivatives
.
esint -- Extended set of integrals for Computer Modern
.
esint-type1 -- Font esint10 in Type 1 format
.
etaremune -- Reverse-counting enumerate environment
.
etextools -- e-TeX tools for LaTeX users and package writers
.
etoc -- Completely customisable TOCs
.
eukdate -- UK format dates, with weekday
.
eulerpx -- A modern interface for the Euler math fonts
.
europasscv -- Unofficial class for the new version of the Europass
curriculum vitae
.
europecv -- Unofficial class for European curricula vitae
.
everyhook -- Hooks for standard TeX token lists
.
everypage -- Provide hooks to be run on every page of a document
.
exam -- Package for typesetting exam scripts
.
exam-n -- Exam class, focused on collaborative authoring
.
examdesign -- LaTeX class for typesetting exams
.
example -- Typeset examples for TeX courses
.
examplep -- Verbatim phrases and listings in LaTeX
.
exceltex -- Get data from Excel files into LaTeX
.
excludeonly -- Prevent files being \include-ed
.
exercise -- Typeset exercises, problems, etc. and their answers
.
exercises -- Typeset exercises and solutions with automatic addition of
points
.
exp-testopt -- Expandable \@testopt (and related) macros
.
expdlist -- Expanded description environments
.
export -- Import and export values of LaTeX registers
.
exsheets -- Create exercise sheets and exams
.
exsol -- Exercises and solutions from the same source, into a book
.
extract -- Extract parts of a document and write to another document
.
facsimile -- Document class for preparing faxes
.
factura -- Typeset and calculate invoices according to Venezuelan law
.
fancyhandout -- A LaTeX class for producing nice-looking handouts
.
fancylabel -- Complex labelling with LaTeX
.
fancynum -- Typeset numbers
.
fancypar -- Decoration of individual paragraphs
.
fancyslides -- Custom presentation class built upon LaTeX Beamer
.
fancytabs -- Fancy page border tabs
.
fancytooltips -- Include a wide range of material in PDF tooltips
.
fcolumn -- Typesetting financial tables
.
fetchcls -- Fetch the current class name
.
ffslides -- Freeform slides based on the article class
.
fgruler -- draw rulers on the foreground or in the text
.
fibeamer -- Beamer theme for thesis defense presentations at Masaryk
University (Brno, Czech Republic)
.
fifo-stack -- FIFO and stack implementation for package writers
.
figsize -- Auto-size graphics
.
filecontents -- Extended filecontents and filecontents* environments
.
filecontentsdef -- filecontents + macro + verbatim
.
filedate -- Access and compare info and modification dates
.
fileinfo -- Enhanced display of LaTeX File Information
.
filemod -- Provide file modification times, and compare them
.
fink -- The LaTeX2e File Name Keeper
.
finstrut -- Adjust behaviour of the ends of footnotes
.
fithesis -- Thesis class and template for Masaryk University (Brno, Czech
Republic)
.
fixcmex -- Fully scalable version of Computer Modern Math Extension font
.
fixfoot -- Multiple use of the same footnote text
.
fixme -- Collaborative annotation tool for LaTeX
.
fixmetodonotes -- Add notes on document development
.
fjodor -- A selection of layout styles
.
flabels -- Labels for files and folders
.
flacards -- Generate flashcards for printing
.
flagderiv -- Flag style derivation package
.
flashcards -- A class for typesetting flashcards
.
flashmovie -- Directly embed flash movies into PDF files
.
flipbook -- Typeset flipbook animations, in the corners of documents
.
flippdf -- Horizontal flipping of pages with pdfLaTeX
.
floatflt -- Wrap text around floats
.
floatrow -- Modifying the layout of floats
.
flowfram -- Create text frames for posters, brochures or magazines
.
fmp -- Include Functional MetaPost in LaTeX
.
fmtcount -- Display the value of a LaTeX counter in a variety of formats
.
fn2end -- Convert footnotes to endnotes
.
fnbreak -- Warn for split footnotes
.
fncychap -- Seven predefined chapter heading styles
.
fncylab -- Alter the format of \label references
.
fnpara -- Footnotes in paragraphs
.
fnpct -- Manage footnote marks' interaction with punctuation
.
fnumprint -- Print a number in 'appropriate' format
.
foilhtml -- Interface between foiltex and LaTeX2HTML
.
fontaxes -- Additional font axes for LaTeX
.
fonttable -- Print font tables from a LaTeX document
.
footmisc -- A range of footnote options
.
footmisx -- A range of footnote options
.
footnotebackref -- Back-references from footnotes
.
footnotehyper -- hyperref aware footnote.sty
.
footnoterange -- References to ranges of footnotes
.
footnpag -- Per-page numbering of footnotes
.
forarray -- Using array structures in LaTeX
.
foreign -- Systematic treatment of 'foreign' words in documents
.
forloop -- Iteration in LaTeX
.
formlett -- Letters to multiple recipients
.
forms16be -- Initialize form properties using big-endian encoding
.
formular -- Create forms containing field for manual entry
.
fragments -- Fragments of LaTeX code
.
frame -- Framed boxes for Plain TeX
.
framed -- Framed or shaded regions that can break across pages
.
frankenstein -- A collection of LaTeX packages
.
frege -- Typeset fregean Begriffsschrift
.
ftcap -- Allows \caption at the beginning of a table-environment
.
ftnxtra -- Extend the applicability of the \footnote command
.
fullblck -- Left-blocking for letter class
.
fullminipage -- Minipage spanning a complete page
.
fullwidth -- Adjust margins of text block
.
fundus-calligra -- Support for the calligra font in LaTeX documents
.
fundus-cyr -- Support for Washington University Cyrillic fonts
.
fundus-sueterlin -- Sutterlin
.
fvextra -- Extensions and patches for fancyvrb
.
fwlw -- Get first and last words of a page
.
g-brief -- Letter document class
.
gauss -- A package for Gaussian operations
.
gcard -- Arrange text on a sheet to fold into a greeting card
.
gcite -- Citations in a reader-friendly style
.
gender -- Gender neutrality for languages with grammatical gender
.
genmpage -- Generalization of LaTeX's minipages
.
getfiledate -- Find the date of last modification of a file
.
getitems -- Gathering items from a list-like environment
.
ginpenc -- Modification of inputenc for German
.
gitfile-info -- Get git metadata for a specific file
.
gitinfo -- Access metadata from the git distributed version control system
.
gitinfo2 -- Access metadata from the git distributed version control system
.
gitlog -- Typesetting git changelogs
.
gloss -- Create glossaries using BibTeX
.
glossaries -- Create glossaries and lists of acronyms
.
glossaries-danish -- Danish language module for glossaries package
.
glossaries-dutch -- Dutch language module for glossaries package
.
glossaries-english -- English language module for glossaries package
.
glossaries-extra -- An extension to the glossaries package
.
glossaries-finnish -- Finnish language module for glossaries package
.
glossaries-french -- French language module for glossaries package
.
glossaries-german -- German language module for glossaries package
.
glossaries-irish -- Irish language module for glossaries package
.
glossaries-italian -- Italian language module for glossaries package
.
glossaries-magyar -- Magyar language module for glossaries package
.
glossaries-polish -- Polish language module for glossaries package
.
glossaries-portuges -- Portuges language module for glossaries package
.
glossaries-serbian -- Serbian language module for glossaries package
.
glossaries-spanish -- Spanish language module for glossaries package
.
gmdoc -- Documentation of LaTeX packages
.
gmdoc-enhance -- Some enhancements to the gmdoc package
.
gmiflink -- Simplify usage of \hypertarget and \hyperlink
.
gmutils -- Support macros for other packages
.
gmverb -- A variant of LaTeX \verb, verbatim and shortvrb
.
graphbox -- Extend graphicx to improve placement of graphics
.
graphicx-psmin -- Reduce size of PostScript files by not repeating images
.
graphicxbox -- Insert a graphical image as a background
.
grayhints -- Produce 'gray hints' to a variable text field
.
grfpaste -- Include fragments of a dvi file
.
grid -- Grid typesetting in LaTeX
.
grid-system -- Page organisation, modelled on CSS facilities
.
gridset -- Grid, a.k.a. in-register, setting
.
gridslides -- Free form slides with blocks placed on a grid
.
guitlogo -- Macros for typesetting the GuIT logo
.
halloweenmath -- Scary and creepy math symbols with AMS-LaTeX integration
.
hackthefootline -- Footline selection and configuration for LaTeX beamer's
standard themes
.
handout -- Create handout for auditors of a talk
.
hang -- Environments for hanging paragraphs and list items
.
hanging -- Hanging paragraphs
.
hardwrap -- Hard wrap text to a certain character length
.
harnon-cv -- A CV document class with a vertical timeline for experience
.
harpoon -- Extra harpoons, using the graphics package
.
hc -- Replacement for the LaTeX classes
.
he-she -- Alternating pronouns to aid gender-neutral writing
.
hhtensor -- Print vectors, matrices, and tensors
.
histogr -- Draw histograms with the LaTeX picture environment
.
hitec -- Class for documentation
.
hletter -- Flexible letter typesetting with flexible page headings
.
hpsdiss -- A dissertation class
.
hrefhide -- Suppress hyper links when printing
.
hvindex -- Support for indexing
.
hypdvips -- Hyperref extensions for use with dvips
.
hyper -- Hypertext cross referencing
.
hypernat -- Allow hyperref and natbib to work together
.
hyperxmp -- Embed XMP metadata within a LaTeX document
.
hyphenat -- Disable/enable hypenation
.
idxcmds -- Semantic commands for adding formatted index entries
.
idxlayout -- Configurable index layout, responsive to KOMA-Script and memoir
.
iffont -- Conditionally load fonts with fontspec
.
ifmslide -- Presentation slides for screen and printouts
.
ifmtarg -- If-then-else command for processing potentially empty arguments
.
ifnextok -- Utility macro: peek ahead without ignoring spaces
.
ifoddpage -- Determine if the current page is odd or even
.
ifplatform -- Conditionals to test which platform is being used
.
ifthenx -- Extra tests for \ifthenelse
.
iitem -- Multiple level of lists in one list-like environment
.
image-gallery -- Create an overview of pictures from a digital camera or
from other sources
.
imakeidx -- A package for producing multiple indexes
.
import -- Establish input relative to a directory
.
incgraph -- Sophisticated graphics inclusion in a PDF document
.
indextools -- Producing multiple indices
.
inlinedef -- Inline expansions within definitions
.
inputtrc -- Trace which file loads which
.
interactiveworkbook -- LaTeX-based interactive PDF on the Web
.
interfaces -- Set parameters for other packages, conveniently
.
inversepath -- Calculate inverse file paths
.
invoice -- Generate invoices
.
invoice2 -- Intelligent invoices with LaTeX3
.
iso -- Generic ISO standards typesetting macros
.
iso10303 -- Typesetting the STEP standards
.
isodate -- Tune the output format of dates according to language
.
isodoc -- A LaTeX class for typesetting letters and invoices
.
isonums -- Display numbers in maths mode according to ISO 31-0
.
isopt -- writing a TeX length with a space between number and unit
.
isorot -- Rotation of document elements
.
isotope -- A package for typesetting isotopes
.
issuulinks -- Produce external links instead of internal ones
.
iwhdp -- Halle Institute for Economic Research (IWH) Discussion Papers
.
jlabels -- Make letter-sized pages of labels
.
jslectureplanner -- Creation and management of university course material
.
jumplines -- Articles with teasers and continuation later on
.
jvlisting -- A replacement for LaTeX's verbatim package
.
kantlipsum -- Generate sentences in Kant's style
.
kerntest -- Print tables and generate control files to adjust kernings
.
keycommand -- Simple creation of commands with key-value arguments
.
keyfloat -- provides a key/value interface for generating floats
.
keyreader -- A robust interface to xkeyval
.
keystroke -- Graphical representation of keys on keyboard
.
keyval2e -- A lightweight and robust key-value parser
.
keyvaltable -- Re-usable tables separating content and presentation
.
kix -- Typeset KIX codes
.
knowledge -- Displaying, hyperlinking, and indexing notions in a document
.
koma-moderncvclassic -- Makes the style and command of moderncv (style
classic) available for koma-classes and thus compatible with BibLaTeX
.
koma-script-sfs -- Koma-script letter class option for Finnish
.
komacv -- Typesetting a beautiful CV with various style options
.
komacv-rg -- LaTeX packages that aid in creating CVs based on the komacv
class and creating related documents
.
ktv-texdata -- Extract subsets of documents
.
l3build -- A testing and building system for (La)TeX
.
labbook -- Typeset laboratory journals
.
labels -- Print sheets of sticky labels
.
labelschanged -- identifies labels which cause endless "may have changed"
warnings
.
lastpackage -- Indicates the last loaded package
.
lastpage -- Reference last page for Page N of M type footers
.
latex-tds -- A structured copy of the LaTeX distribution
.
latexdemo -- Demonstrate LaTeX code with its resulting output
.
latexgit -- A LaTeX git wrapper
.
layouts -- Display various elements of a document's layout
.
lazylist -- Lists in TeX's "mouth"
.
lccaps -- Lowercased (spaced) small capitals
.
lcd -- Alphanumerical LCD-style displays
.
lcg -- Generate random integers
.
leading -- Define leading with a length
.
leaflet -- Create small handouts (flyers)
.
leftidx -- Left and right subscripts and superscripts in math mode
.
leipzig -- Typeset and index linguistic gloss abbreviations
.
lengthconvert -- Express lengths in arbitrary units
.
lettre -- Letters and faxes in French
.
lettrine -- Typeset dropped capitals
.
lewis -- Draw Lewis structures
.
lhelp -- Miscellaneous helper packages
.
libgreek -- Use Libertine or Biolinum Greek glyphs in mathematics
.
limap -- Typeset maps and blocks according to the Information Mapping(r)
method
.
linegoal -- A "dimen" that returns the space left on the line
.
linop -- Typeset linear operators as they appear in quantum theory or linear
algebra
.
lipsum -- Easy access to the Lorem Ipsum dummy text
.
lisp-on-tex -- Execute LISP code in a LaTeX document
.
listing -- Produce formatted program listings
.
listlbls -- Creates a list of all labels used throughout a document
.
listliketab -- Typeset lists as tables
.
listofsymbols -- Create and manipulate lists of symbols
.
lkproof -- LK Proof figure macros
.
lmake -- Process lists to do repetitive actions
.
locality -- Various macros for keeping things local
.
localloc -- Macros for localizing TeX register allocations
.
logbox -- e-TeX showbox facilities for exploration purposes
.
logical-markup-utils -- Packages for language-dependent inline quotes and
dashes
.
logpap -- Generate logarithmic graph paper with LaTeX
.
longfbox -- Draw framed boxes with standard CSS attributes that can break
over multiple pages
.
longfigure -- Provides a figure-like environment that break over pages
.
longnamefilelist -- Tidy \listfiles with long file names
.
loops -- General looping macros for use with LaTeX
.
lsc -- Typesetting Live Sequence Charts
.
lstaddons -- Add-on packages for listings: autogobble and line background
.
lt3graph -- Provide a graph datastructure for experimental LaTeX3
.
ltablex -- Table package extensions
.
ltabptch -- Bug fix for longtable
.
ltxdockit -- Documentation support
.
ltxindex -- A LaTeX package to typeset indices with GNU's Texindex
.
ltxkeys -- A robust key parser for LaTeX
.
ltxnew -- A simple means of creating commands
.
ltxtools -- A collection of LaTeX API macros
.
lua-check-hyphen -- Mark hyphenations in a document, for checking
.
luatodonotes -- Add editing annotations in a LuaLaTeX document
.
macroswap -- Swap the definitions of two LaTeX macros
.
magaz -- Magazine layout
.
mailing -- Macros for mail merging
.
mailmerge -- Repeating text field substitution
.
makebarcode -- Print various kinds 2/5 and Code 39 bar codes
.
makebase -- Typeset counters in a different base
.
makebox -- Defines a \makebox* command
.
makecell -- Tabular column heads and multilined cells
.
makecirc -- A MetaPost library for drawing electrical circuit diagrams
.
makecmds -- The new \makecommand command always (re)defines a command
.
makedtx -- Perl script to help generate dtx and ins files
.
makeglos -- Include a glossary into a document
.
mandi -- Macros for introductory physics and astronomy
.
manfnt -- LaTeX support for the TeX book symbols
.
manuscript -- Emulate look of a document typed on a typewriter
.
marginfit -- Improved margin notes
.
marginfix -- Patch \marginpar to avoid overfull margins
.
marginnote -- Notes in the margin, even where \marginpar fails
.
markdown -- A package for converting and rendering markdown documents inside
TeX
.
mathalfa -- General package for loading maths alphabets in LaTeX
.
mathastext -- Use the text font in maths mode
.
mathexam -- Package for typesetting exams
.
mathfam256 -- Extend math family up to 256 for pLaTeX/upLaTeX/Lamed
.
maybemath -- Make math bold or italic according to context
.
mbenotes -- Notes in tables or images
.
mcaption -- Put captions in the margin
.
mceinleger -- Creating covers for music cassettes
.
mcexam -- Create randomized Multiple Choice questions
.
mcite -- Multiple items in a single citation
.
mciteplus -- Enhanced multiple citations
.
mdframed -- Framed environments that can split at page boundaries
.
media9 -- Multimedia inclusion package with Adobe Reader-9/X compatibility
.
medstarbeamer -- Beamer document class for MedStar Health Research Institute
.
meetingmins -- Format written minutes of meetings
.
memexsupp -- Experimental memoir support
.
memory -- Containers for data in LaTeX
.
mensa-tex -- Typeset simple school cafeteria menus
.
menu -- Typesetting menus
.
menukeys -- Format menu sequences, paths and keystrokes from lists
.
method -- Typeset method and variable declarations
.
metre -- Support for the work of classicists
.
mfirstuc -- Uppercase the first letter of a word
.
mftinc -- Pretty-print Metafont source
.
midpage -- Environment for vertical centring
.
minibox -- A simple type of box for LaTeX
.
minidocument -- creates miniature documents inside other LaTeX documents
.
minifp -- Fixed-point real computations to 8 decimals
.
minipage-marginpar -- Minipages with marginal notes
.
minitoc -- Produce a table of contents for each chapter, part or section
.
minorrevision -- Quote and refer to a manuscript for minor revisions
.
minted -- Highlighted source code for LaTeX
.
minutes -- Typeset the minutes of meetings
.
mla-paper -- Proper MLA formatting
.
mlist -- Logical markup for lists
.
mmap -- Include CMap resources in PDF files from pdfTeX
.
mnotes -- Margin annotation for collaborative writing
.
moderncv -- A modern curriculum vitae class
.
modernposter -- a modern LaTeX poster theme
.
moderntimeline -- Timelines for use with moderncv
.
modref -- Customisation of cross-references in LaTeX
.
modroman -- Write numbers in lower case roman numerals
.
modular -- Relative section headings for modular documents
.
monofill -- Alignment of plain text
.
moodle -- Generating Moodle quizzes via LaTeX
.
moreenum -- More enumeration options
.
morefloats -- Increase the number of simultaneous LaTeX floats
.
morehype -- Hypertext tools for use with LaTeX
.
moresize -- Allows font sizes up to 35.83pt
.
moreverb -- Extended verbatim
.
morewrites -- Always room for a new write stream
.
movie15 -- Multimedia inclusion package
.
mparhack -- Work around a LaTeX bug in marginpars
.
mpostinl -- Embed MetaPost figures within LaTeX documents
.
msc -- Draw MSC diagrams
.
msg -- A package for LaTeX localisation
.
mslapa -- Michael Landy's APA citation style
.
mtgreek -- Use italic and upright greek letters with mathtime
.
multenum -- Multi-column enumerated lists
.
multiaudience -- Several versions of output from the same source
.
multibbl -- Multiple bibliographies
.
multicap -- Format captions inside multicols
.
multidef -- Quickly define several similar macros
.
multienv -- Multiple environments using a "key=value" syntax
.
multiexpand -- Variations on the primitive command \expandafter
.
multilang -- A LaTeX package for maintaining multiple translations of a
document
.
multirow -- Create tabular cells spanning multiple rows
.
mversion -- Keeping track of document versions
.
mwe -- Packages and image files for MWEs
.
mycv -- A list-driven CV class, allowing TikZ decorations
.
mylatexformat -- Build a format based on the preamble of a LaTeX file
.
nag -- Detecting and warning about obsolete LaTeX commands
.
nameauth -- Name authority mechanism for consistency in body text and index
.
namespc -- Rudimentary C++-like namespaces in LaTeX
.
ncclatex -- An extended general-purpose class
.
ncctools -- A collection of general packages for LaTeX
.
needspace -- Insert pagebreak if not enough space
.
nestquot -- Alternate quotes between double and single with nesting
.
newcommand -- Generate new LaTeX command definitions
.
newenviron -- Processing an environment's body
.
newfile -- User level management of LaTeX input and output
.
newlfm -- Write letters, facsimiles, and memos
.
newspaper -- Typeset newsletters to resemble newspapers
.
newunicodechar -- Definitions of the meaning of Unicode characters
.
newvbtm -- Define your own verbatim-like environment
.
newverbs -- Define new versions of \verb, including short verb versions
.
nextpage -- Generalisations of the page advance commands
.
nfssext-cfr -- Extensions to the LaTeX NFSS
.
nicefilelist -- Provide \listfiles alignment
.
niceframe -- Support for fancy frames
.
nicetext -- Minimal markup for simple text (Wikipedia style) and
documentation
.
nlctdoc -- Package documentation class
.
noconflict -- Resolve macro name conflict between packages
.
noindentafter -- Tool to prevent paragraph indentation after
environments/macros
.
noitcrul -- Improved underlines in mathematics
.
nolbreaks -- No line breaks in text
.
nomencl -- Produce lists of symbols as in nomenclature
.
nomentbl -- Nomenclature typeset in a longtable
.
nonfloat -- Non-floating table and figure captions
.
nonumonpart -- Prevent page numbers on part pages
.
nopageno -- No page numbers in LaTeX documents
.
normalcolor -- Changing \normalcolor
.
notes -- Mark sections of a document
.
notespages -- Filling documents with notes pages and notes areas
.
notestex -- An all-in-one LaTeX notes package for students
.
notoccite -- Prevent trouble from citations in table of contents, etc
.
nowidow -- Avoid widows
.
nox -- Adaptable tables
.
ntheorem -- Enhanced theorem environment
.
numberedblock -- Print a block of code, with unique index number
.
numname -- Convert a number to its English expression
.
numprint -- Print numbers with separators and exponent if necessary
.
numspell -- Spelling cardinal and ordinal numbers
.
ocg-p -- PDF OCG support in LaTeX
.
ocgx -- Use OCGs within a PDF document without JavaScript
.
ocgx2 -- Drop-in replacement for 'ocgx' and 'ocg-p'
.
ocr-latex -- LaTeX support for ocr fonts
.
octavo -- Typeset books following classical design and layout
.
oldstyle -- Old style numbers in OT1 encoding
.
onlyamsmath -- Inhibit use of non-amsmath mathematics markup when using
amsmath
.
opcit -- Footnote-style bibliographical references
.
optidef -- Environments for writing optimization problems
.
optional -- Facilitate optional printing of parts of a document
.
options -- Provides convenient key-value options for LaTeX package writers
.
outline -- List environment for making outlines
.
outliner -- Change section levels easily
.
outlines -- Produce "outline" lists
.
outlining -- Create outlines for scientific documents
.
overlays -- Incremental slides
.
overpic -- Combine LaTeX commands over included graphics
.
pagecolor -- Interrogate page colour
.
pagecont -- Page numbering that continues between documents
.
pagenote -- Notes at end of document
.
pagerange -- Flexible and configurable page range typesetting
.
pageslts -- Variants of last page labels
.
paper -- Versions of article class, tuned for scholarly publications
.
papercdcase -- Origami-style folding paper CD case
.
papermas -- Compute the mass of a printed version of a document
.
papertex -- Class for newspapers, etc
.
paracol -- Multiple columns with texts "in parallel"
.
parades -- Tabulators and space between paragraphs in galley approach
.
paralist -- Enumerate and itemize within paragraphs
.
paresse -- Define simple macros for greek letters
.
parnotes -- Notes after every paragraph (or elsewhere)
.
parselines -- Apply a macro to each line of an environment
.
pas-cours -- Macros useful in preparing teaching material
.
pas-cv -- Flexible typesetting of Curricula Vitae
.
pas-tableur -- Create a spreadsheet layout
.
patch -- Patch loaded packages, etc.
.
patchcmd -- Change the definition of an existing command
.
pauldoc -- German LaTeX package documentation
.
pawpict -- Using graphics from PAW
.
pax -- Extract and reinsert PDF annotations with pdfTeX
.
pbox -- A variable-width \parbox command
.
pbsheet -- Problem sheet class
.
pdf14 -- Restore PDF 1.4 to a TeX live 2010 format
.
pdfcomment -- A user-friendly interface to pdf annotations
.
pdfcprot -- Activating and setting of character protruding using pdfLaTeX
.
pdfmarginpar -- Generate marginpar-equivalent PDF annotations
.
pdfpagediff -- Find difference between two PDF's
.
pdfprivacy -- A LaTeX package to remove or suppress pdf meta-data
.
pdfreview -- Annotate PDF files with margin notes
.
pdfscreen -- Support screen-based document design
.
pdfslide -- Presentation slides using pdfTeX
.
pdfsync -- Provide links between source and PDF
.
pdfwin -- customizable windows for screen viewing of TeX documents
.
pdfx -- PDF/X and PDF/A support for pdfTeX
.
pecha -- Print Tibetan text in the classic pecha layout style
.
perltex -- Define LaTeX macros in terms of Perl code
.
permute -- Support for symmetric groups
.
petiteannonce -- A class for small advertisements
.
phffullpagefigure -- Figures which fill up a whole page
.
phfnote -- Basic formatting for short documents
.
phfparen -- Parenthetic math expressions made simpler and less redundant
.
phfqit -- Macros for typesetting Quantum Information Theory
.
phfquotetext -- Quote verbatim text without white space formatting
.
phfsvnwatermark -- Watermarks with version control information from SVN
.
phfthm -- Goodies for theorems and proofs
.
philex -- Cross references for named and numbered environments
.
phonenumbers -- Typesetting telephone numbers with LaTeX.
.
photo -- A float environment for photographs
.
piff -- Macro tools by Mike Piff
.
pkgloader -- Managing the options and loading order of other packages
.
placeins -- Control float placement
.
plantslabels -- Write labels for plants
.
plates -- Arrange for "plates" sections of documents
.
plweb -- Literate Programming for Prolog with LaTeX
.
polynom -- Macros for manipulating polynomials
.
polynomial -- Typeset (univariate) polynomials
.
polytable -- Tabular-like environments with named columns
.
postcards -- Facilitates mass-mailing of postcards (junkmail)
.
poster-mac -- Make posters and banners with TeX
.
ppr-prv -- Prosper preview
.
preprint -- A bundle of packages provided "as is"
.
pressrelease -- A class for typesetting press releases
.
prettyref -- Make label references "self-identify"
.
printlen -- Print lengths using specified units
.
probsoln -- Generate problem sheets and their solution sheets
.
program -- Typesetting programs and algorithms
.
progress -- Creates an overview of a document's state
.
progressbar -- Visualize shares of total amounts in the form of a
(progress-)bar
.
proofread -- Commands for inserting annotations
.
properties -- Load properties from a file
.
prosper -- LaTeX class for high quality slides
.
protex -- Literate programming package
.
protocol -- A class for minutes of meetings
.
psfragx -- A psfrag eXtension
.
pstool -- Support for psfrag within pdfLaTeX
.
pstring -- typeset sequences with justification pointers
.
pxgreeks -- Shape selection for PX fonts Greek letters
.
pygmentex -- Use Pygments to format code listings in documents
.
python -- Embed Python code in LaTeX
.
qcm -- A LaTeX2e class for making multiple choice questionnaires
.
qstest -- Bundle for unit tests and pattern matching
.
qsymbols -- Maths symbol abbreviations
.
quicktype -- LaTeX package for quick typesetting
.
quotchap -- Decorative chapter headings
.
quoting -- Consolidated environment for displayed text
.
quotmark -- Consistent quote marks
.
ran_toks -- Randomise token strings
.
randtext -- Randomise the order of characters in strings
.
rccol -- Decimal-centered optionally rounded numbers in tabular
.
rcs-multi -- Typeset RCS version control in multiple-file documents
.
rcsinfo -- Support for the revision control system
.
readarray -- Read, store and recall array-formatted data
.
realboxes -- Variants of common box-commands that read their content as real
box and not as macro argument
.
recipe -- A LaTeX class to typeset recipes
.
recipebook -- Typeset 5.5" x 8" recipes for browsing or printing
.
recipecard -- Typeset recipes in note-card-sized boxes
.
rectopma -- Recycle top matter
.
refcheck -- Check references (in figures, table, equations, etc)
.
refenums -- Define reference labels items with names of their own
.
reflectgraphics -- Techniques for reflecting graphics
.
refman -- Format technical reference manuals
.
refstyle -- Advanced formatting of cross references
.
regcount -- Display the allocation status of the TeX registers
.
regexpatch -- High level patching of commands
.
register -- Typeset programmable elements in digital hardware (registers)
.
regstats -- Information about register use
.
relenc -- A "relaxed" font encoding
.
relsize -- Set the font size relative to the current font size
.
repeatindex -- Repeat items in an index after a page or column break
.
repltext -- Control how text gets copied from a PDF file
.
rjlparshap -- Support for use of \parshape in LaTeX
.
rlepsf -- Rewrite labels in EPS graphics
.
rmpage -- A package to help change page layout parameters in LaTeX
.
robustcommand -- Declare robust command, with \newcommand checks
.
robustindex -- Create index with pagerefs
.
romanbar -- Write roman number with "bars"
.
romanbarpagenumber -- Typesetting roman page numbers
.
romanneg -- Roman page numbers negative
.
romannum -- Generate roman numerals instead of arabic digits
.
rotfloat -- Rotate floats
.
rotpages -- Typeset sets of pages upside-down and backwards
.
roundbox -- Round boxes in LaTeX
.
rterface -- Access to R analysis from within a document
.
rtkinenc -- Input encoding with fallback procedures
.
rulercompass -- A TikZ library for straight-edge and compass diagrams
.
rvwrite -- Increase the number of available output streams in LaTeX
.
sanitize-umlaut -- sanitize umlauts for MakeIndex and pdfLaTeX
.
sauerj -- A bundle of utilities by Jonathan Sauer
.
savefnmark -- Save name of the footnote mark for reuse
.
savesym -- Redefine symbols where names conflict
.
savetrees -- Optimise the use of each page of a LaTeX document
.
scale -- Scale document by sqrt(2) or magstep(2)
.
scalebar -- Create scalebars for maps, diagrams or photos
.
scalerel -- Constrained scaling and stretching of objects
.
scanpages -- Support importing and embellishing scanned documents
.
scrlttr2copy -- A letter class option file for the automatic creation of
copies
.
sdrt -- Macros for Segmented Discourse Representation Theory
.
secdot -- Section numbers with trailing dots
.
sectionbox -- Create fancy boxed ((sub)sub)sections
.
sectionbreak -- LaTeX support for section breaks
.
sectsty -- Control sectional headers
.
seealso -- Improve the performance of \see macros with makeindex
.
selectp -- Select pages to be output
.
semantic -- Help for writing programming language semantics
.
semantic-markup -- Meaningful semantic markup in the spirit of the Text
Encoding Initiative
.
semioneside -- Put only special contents on left-hand pages in two sided
layout
.
semproc -- Seminar proceedings
.
sepfootnotes -- Support footnotes and endnotes from separate files
.
seqsplit -- Split long sequences of characters in a neutral way
.
sesstime -- Session and timing information in lecture notes
.
sf298 -- Standard form 298
.
sffms -- Typesetting science fiction/fantasy manuscripts
.
sfmath -- Sans-serif mathematics
.
shadethm -- Theorem environments that are shaded
.
shadow -- Shadow boxes
.
shadowtext -- Produce text with a shadow behind it
.
shapepar -- A macro to typeset paragraphs in specific shapes
.
shdoc -- Float environment to document the shell commands of a terminal
session
.
shipunov -- A collection of LaTeX packages and classes
.
shorttoc -- Table of contents with different depths
.
show2e -- Variants of \show for LaTeX2e
.
showcharinbox -- Show characters inside a box
.
showdim -- Variants on printing dimensions
.
showexpl -- Typesetting LaTeX source code
.
showhyphens -- Show all possible hyphenations in LuaLaTeX
.
showlabels -- Show label commands in the margin
.
sidecap -- Typeset captions sideways
.
sidenotes -- Typeset notes containing rich content, in the margin
.
silence -- Selective filtering of error messages and warnings
.
simplecd -- Simple CD, DVD covers for printing
.
simplecv -- A simple class for writing curricula vitae
.
simpleinvoice -- Easy typesetting of invoices
.
sitem -- Save the optional argument of \item
.
skb -- Tools for a repository of long-living documents
.
skdoc -- Documentation and extraction for packages and document classes
.
skeycommand -- Create commands using parameters and keyval in parallel
.
skeyval -- Key-value parsing combining features of xkeyval and pgfkeys
.
skrapport -- 'Simple' class for reports, etc.
.
slantsc -- Access different-shaped small-caps fonts
.
smalltableof -- Create listoffigures etc. in a single chapter
.
smartunits -- Converting between common metric and Imperial units
.
smartref -- Extend LaTeX's \ref capability
.
snapshot -- List the external dependencies of a LaTeX document
.
snotez -- Typeset notes, in the margin
.
soul -- Hyphenation for letterspacing, underlining, and more
.
spark-otf -- Support OpenType Spark fonts
.
sparklines -- Drawing sparklines: intense, simple, wordlike graphics
.
sphack -- Patch LaTeX kernel spacing macros
.
splitindex -- Unlimited number of indexes
.
spot -- Spotlight highlighting for Beamer
.
spotcolor -- Spot colours for pdfLaTeX
.
spreadtab -- Spreadsheet features for LaTeX tabular environments
.
spverbatim -- Allow line breaks within \verb and verbatim output
.
srbook-mem -- Support for use of memoir in Serbian
.
srcltx -- Jump between DVI and TeX files
.
sseq -- Typesetting spectral sequence charts
.
sslides -- Slides with headers and footers
.
stack -- Tools to define and use stacks
.
stackengine -- Highly customised stacking of objects, insets, baseline
changes, etc
.
standalone -- Compile TeX pictures stand-alone or as part of a document
.
statistik -- Store statistics of a document
.
stdclsdv -- Provide sectioning information for package writers
.
stealcaps -- "Steal" small capitals
.
stdpage -- Standard pages with n lines of at most m characters each
.
stex -- An Infrastructure for Semantic Preloading of LaTeX Documents
.
storebox -- Storing information for reuse
.
storecmd -- Store the name of a defined command in a container
.
stringstrings -- String manipulation for cosmetic and programming
application
.
sttools -- Various macros
.
stubs -- Create tear-off stubs at the bottom of a page
.
studenthandouts -- Management and styling of student handout projects
.
subdepth -- Unify maths subscript height
.
subeqn -- Package for subequation numbering
.
subeqnarray -- Equation array with sub numbering
.
subfigmat -- Automates layout when using the subfigure package
.
subfigure -- Deprecated: Figures divided into subfigures
.
subfiles -- Individual typesetting of subfiles of a "main" document
.
subfloat -- Sub-numbering for figures and tables
.
substitutefont -- Easy font substitution
.
substr -- Deal with substrings in strings
.
supertabular -- A multi-page tables package
.
svg -- Include and extract SVG pictures in LaTeX documents
.
svgcolor -- Define SVG named colours
.
svn -- Typeset Subversion keywords
.
svn-multi -- Subversion keywords in multi-file LaTeX documents
.
svn-prov -- Subversion variants of \Provides... macros
.
svninfo -- Typeset Subversion keywords
.
syntax -- Creation of syntax diagrams
.
syntrace -- Labels for tracing in a syntax tree
.
synttree -- Typeset syntactic trees
.
tabfigures -- Maintain vertical alignment of figures
.
tableaux -- Construct tables of signs and variations
.
tablefootnote -- Permit footnotes in tables
.
tableof -- Tagging tables of contents
.
tablestyles --
.
tablists -- Tabulated lists of short items
.
tabls -- Better vertical spacing in tables and arrays
.
tabstackengine -- "Tabbing" front-end to stackengine
.
tabto-ltx -- "Tab" to a measured position in the line
.
tabu -- Flexible LaTeX tabulars
.
tabularborder -- Remove excess space at left and right of tabular
.
tabularcalc -- Calculate formulas in a tabular environment
.
tabularew -- A variation on the tabular environment
.
tabulary -- Tabular with variable width columns balanced
.
tagging -- Document configuration with tags
.
tagpair -- Word-by-word glosses, translations, and bibliographic
attributions
.
talk -- A LaTeX class for presentations
.
tamefloats -- Experimentally use \holdinginserts with LaTeX floats
.
tasks -- Horizontally columned lists
.
tcldoc -- Doc/docstrip for tcl
.
tcolorbox -- Coloured boxes, for LaTeX examples and theorems, etc
.
tdclock -- A ticking digital clock package for PDF output
.
technics -- A package to format technical documents
.
ted -- A (primitive) token list editor
.
templatetools -- Commands useful in LaTeX templates
.
termcal -- Print a class calendar
.
termlist -- Label any kind of term with a continuous counter
.
testhyphens -- Testing hyphenation patterns
.
testidx -- Dummy text for testing index styles and indexing applications
.
tex-label -- Place a classification on each page of a document
.
texlogos -- Ready-to-use LaTeX logos
.
texmate -- Comprehensive chess annotation in LaTeX
.
texments -- Using the Pygments highlighter in LaTeX
.
texpower -- Create dynamic online presentations with LaTeX
.
texshade -- Package for setting nucleotide and peptide alignments
.
texvc -- Use MediaWiki LaTeX commands
.
textfit -- Fit text to a desired size
.
textmerg -- Merge text in TeX and LaTeX
.
textpos -- Place boxes at arbitrary positions on the LaTeX page
.
textualicomma -- Use the textual comma character as decimal separator in
math mode
.
theoremref -- References with automatic theorem names
.
thinsp -- A stretchable \thinspace for LaTeX
.
thmtools -- Extensions to theorem environments
.
threadcol -- Organize document columns into PDF "article thread"
.
threeparttable -- Tables with captions and notes all the same width
.
threeparttablex -- Notes in longtables
.
thumb -- Thumb marks in documents
.
thumbs -- Create thumb indexes
.
thumby -- Create thumb indexes for printed books
.
ticket -- Make labels, visiting-cards, pins with LaTeX
.
titlecaps -- Setting rich-text input into Titling Caps
.
titlefoot -- Add special material to footer of title page
.
titlepic -- Add picture to title page of a document
.
titleref -- A "\titleref" command to cross-reference section titles
.
titlesec -- Select alternative section titles
.
titling -- Control over the typesetting of the \maketitle command
.
tocbibind -- Add bibliography/index/contents to Table of Contents
.
tocdata -- Adds names to chapters, sections, figures in the TOC and LOF.
.
tocloft -- Control table of contents, figures, etc
.
tocvsec2 -- Section numbering and table of contents control
.
todo -- Make a to-do list for a document
.
todonotes -- Marking things to do in a LaTeX document
.
tokenizer -- A tokenizer
.
toolbox -- Tool macros
.
topfloat -- Move floats to the top of the page
.
totcount -- Find the last value of a counter
.
totpages -- Count pages in a document, and report last page number
.
translations -- Internationalisation of LaTeX2e packages
.
trfsigns -- Typeset transform signs
.
trimspaces -- Trim spaces around an argument or within a macro
.
trivfloat -- Quick float definitions in LaTeX
.
trsym -- Symbols for transformations
.
truncate -- Truncate text to a specified width
.
tucv -- Support for typesetting a CV or resumee
.
turnthepage -- Provide "turn page" instructions
.
twoinone -- Print two pages on a single page
.
twoup -- Print two virtual pages on each physical page
.
txgreeks -- Shape selection for TX fonts Greek letters
.
type1cm -- Arbitrary size font selection in LaTeX
.
typed-checklist -- Typesetting tasks, goals, milestones, artifacts, and more
in LaTeX
.
typeface -- Select a balanced set of fonts
.
typoaid -- Macros for font diagnostics
.
typogrid -- Print a typographic grid
.
uassign -- Environments and options for typesetting university assignments
.
ucs -- Extended UTF-8 input encoding support for LaTeX
.
uebungsblatt -- A LaTeX class for writing exercise sheets
.
umoline -- Underline text allowing line breaking
.
underlin -- Underlined running heads
.
underoverlap -- Position decorations over and under expressions
.
undolabl -- Override existing labels
.
units -- Typeset units
.
unravel -- Watching TeX digest tokens
.
upmethodology -- Writing specifications such as for UP-based methodologies
.
upquote -- Show "realistic" quotes in verbatim
.
uri -- Hyperlinks for a wide range of URIs
.
ushort -- Shorter (and longer) underlines and underbars
.
uspace -- Giving meaning to various Unicode space characters
.
uwmslide -- Slides with a simple Power Point like appearance
.
variablelm -- Font definitions for the variable Latin Modern fonts
.
varindex -- Luxury frontend to the \index command
.
varsfromjobname -- Extract variables from the name of the LaTeX file
.
varwidth -- A variable-width minipage
.
vdmlisting -- Typesetting VDM in ASCII syntax
.
verbasef -- VERBatim Automatic Splitting of External Files
.
verbatimbox -- Deposit verbatim text in a box
.
verbatimcopy -- Make copies of text documents from within LaTeX
.
verbdef -- Define commands which expand to verbatim text
.
verbments -- Syntax highlighting of source code in LaTeX documents
.
version -- Conditionally include text
.
versions -- Optionally omit pieces of text
.
versonotes -- Display brief notes on verso pages
.
vertbars -- Mark vertical rules in margin of text
.
vgrid -- Overlay a grid on the printed page
.
vhistory -- Support for creating a change log
.
vmargin -- Set various page dimensions
.
volumes -- Typeset only parts of a document, with complete indexes etc
.
vpe -- Source specials for PDF output
.
vruler -- Numbering text
.
vwcol -- Variable-width multiple text columns
.
wallcalendar -- A wall calendar class with custom layouts
.
wallpaper -- Easy addition of wallpapers (background images) to LaTeX
documents, including tiling
.
warning -- Global warnings at the end of the logfile
.
warpcol -- Relative alignment of rows in numeric columns in tabulars
.
was -- A collection of small packages by Walter Schmidt
.
widetable -- An environment for typesetting tables of specified width
.
williams -- Miscellaneous macros by Peter Williams
.
withargs -- Ephemeral macro use
.
wordcount -- Estimate the number of words in a LaTeX document
.
wordlike -- Simulating word processor layout
.
wrapfig -- Produces figures which text can flow around
.
wtref -- Extend LaTeX's cross-reference system
.
xargs -- Define commands with many optional arguments
.
xassoccnt -- Associated counters stepping simultaneously
.
xcntperchap -- Track the number of subsections etc. that occur in a
specified tracklevel
.
xcolor-material -- Defines the 256 colors from Google Material Color Palette
.
xcolor-solarized -- Defines the 16 colors from Ethan Schoonover's Solarized
palette
.
xcomment -- Allows selected environments to be included/excluded
.
xdoc -- Extending the LaTeX doc system
.
xellipsis -- Extremely configurable ellipses with formats for various style
manuals
.
xfor -- A reimplementation of the LaTeX for-loop macro
.
xhfill -- Extending \hrulefill
.
xifthen -- Extended conditional commands
.
xint -- Expandable operations on long numbers
.
xltabular -- Longtable support with possible X-column specifier
.
xmpincl -- Include eXtensible Metadata Platform data in pdfLaTeX
.
xnewcommand -- Define \global and \protected commands with \newcommand
.
xoptarg -- Expandable macros that take an optional argument
.
xpatch -- Extending etoolbox patching commands
.
xpeek -- Define commands that peek ahead in the input stream
.
xprintlen -- Print TeX lengths in a variety of units
.
xpunctuate -- Process trailing punctuation which may be redundant
.
xsavebox -- Saveboxes for repeating content without code replication, based
on PDF Form XObjects
.
xsim -- eXercise Sheets IMproved
.
xstring -- String manipulation for (La)TeX
.
xtab -- Break tables across pages
.
xurl -- Allow url break at any alphanumerical character
.
xwatermark -- Graphics and text watermarks on selected pages
.
xytree -- Tree macros using XY-Pic
.
yafoot -- A bundle of miscellaneous footnote packages
.
yaletter -- Extremely flexible macros for letters, envelopes, and label
sheets
.
yagusylo -- A symbol loader
.
ycbook -- A versatile book class
.
ydoc -- Macros for documentation of LaTeX classes and packages
.
yplan -- Daily planner type calendar
.
zebra-goodies -- A collection of handy macros for paper writing
.
zed-csp -- Typesetting Z and CSP format specifications
.
ziffer -- Conversion of punctuation in maths mode
.
zwgetfdate -- Get package or file date
.
zwpagelayout -- Page layout and crop-marks
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2919
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02-2ubuntu8.25
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.02-2ubuntu8.25)
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.02-2ubuntu8.25)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS binaries)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This package contains a version of GRUB that has been built for use with
traditional PC/BIOS architecture. It will not automatically install GRUB
as the active boot loader, nor will it automatically update grub.cfg on
upgrade, so most people should install grub-pc instead.
Homepage: http://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1084-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10299
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1084.91~18.04.1
Config-Version: 5.4.0-1084.91~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1084-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1084-aws
Conflicts: linux-image-unsigned-5.4.0-1084-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1084.91~18.04.1)
Package: docutils-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 639
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.14+dfsg-3
Depends: sgml-base (>= 1.28), xml-core (>= 0.14)
Recommends: python-docutils | python3-docutils
Conffiles:
/etc/emacs/site-start.d/50python-docutils.el 4990891acb4f250008e154560e9f235d
/etc/sgml/docutils-common.cat 07d0fedda91cf07511ba147169574df9
Description: text processing system for reStructuredText - common data
reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
markup syntax and parser system. It is useful for in-line program documentation
(such as Python docstrings), for quickly creating simple web pages, and for
standalone documents.
.
The purpose of the Docutils project is to create a set of tools for
processing reStructuredText documentation into useful formats, such as HTML,
LaTeX, ODT or Unix manpages.
.
This package includes data and configuration files.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://docutils.sourceforge.net/
Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.7-25.1build1
Depends: libc6 (>= 2.4)
Description: GNU time program for measuring CPU resource usage
The 'time' command runs another program, then displays information
about the resources used by that program, collected by the system while
the program was running. You can select which information is reported
and the format in which it is shown, or have 'time' save the information
in a file instead of display it on the screen.
.
The resources that 'time' can report on fall into the general
categories of time, memory, I/O, and IPC calls.
.
The GNU version can format the output in arbitrary ways by using a
printf-style format string to include various resource measurements.
Original-Maintainer: Bob Proulx <bob@proulx.com>
Homepage: http://www.gnu.org/software/time
Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.3-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Pre-Depends: multiarch-support
Description: X11 miscellaneous extension library
libXext provides an X Window System client interface to several extensions to
the X protocol.
.
The supported protocol extensions are:
- DOUBLE-BUFFER (DBE), the Double Buffer extension;
- DPMS, the VESA Display Power Management System extension;
- Extended-Visual-Information (EVI), an extension for gathering extra
information about the X server's visuals;
- LBX, the Low Bandwidth X extension;
- MIT-SHM, the MIT X client/server shared memory extension;
- MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
- Multi-Buffering, the multi-buffering and stereo display extension;
- SECURITY, the X security extension;
- SHAPE, the non-rectangular shaped window extension;
- SYNC, the X synchronization extension;
- TOG-CUP, the Open Group's Colormap Utilization extension;
- XC-APPGROUP, the X Consortium's Application Group extension;
- XC-MISC, the X Consortium's resource ID querying extension;
- XTEST, the X test extension (this is one of two client-side
implementations; the other is in the libXtst library, provided by the
libxtst6 package);
.
libXext also provides a small set of utility functions to aid authors of
client APIs for X protocol extensions.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: landscape-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 396
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: landscape-client
Version: 18.01-0ubuntu3.1
Replaces: landscape-client-ui (<< 16.04), landscape-client-ui-install (<< 16.04)
Depends: python3:any (>= 3.5~), debconf (>= 0.5) | debconf-2.0, python3-twisted, python3-configobj, python3-apt, ca-certificates, python3-gdbm, lsb-release, lsb-base, adduser, bc, lshw, libpam-modules
Breaks: landscape-client-ui (<< 16.04), landscape-client-ui-install (<< 16.04)
Description: Landscape administration system client - Common files
Landscape is a web-based tool for managing Ubuntu systems. This
package is necessary if you want your machine to be managed in a
Landscape account.
.
This package provides the core libraries, as well as the landscape-sysinfo
command. It also sets up the landscape user, landscape directories, and the
hook that runs landscape-sysinfo on startup.
Original-Maintainer: Landscape Team <landscape-team@canonical.com>
Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.4
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
This package provides a number of small utilities which are used
primarily by the installation scripts of Debian packages, although
you may use them directly.
.
The specific utilities included are:
add-shell installkernel ischroot remove-shell run-parts savelog
tempfile which
Original-Maintainer: Clint Adams <clint@debian.org>
Package: python3-certbot-apache
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 397
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot-apache
Version: 0.31.0-1+ubuntu18.04.1+certbot+1
Replaces: python-certbot-apache (<< 0.20.0~), python-letsencrypt-apache
Depends: apache2, certbot (>= 0.26.0~), python3-acme (>= 0.25.0~), python3-augeas, python3-certbot (>= 0.26.0~), python3-mock, python3-pkg-resources, python3-zope.component, python3-zope.interface, python3:any (>= 3.3.2-2~)
Suggests: python-certbot-apache-doc
Breaks: python-certbot-apache (<< 0.20.0~), python-letsencrypt-apache
Description: Apache plugin for Certbot
The objective of Certbot, Let's Encrypt, and the ACME (Automated
Certificate Management Environment) protocol is to make it possible
to set up an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This is
accomplished by running a certificate management agent on the web
server.
.
This agent is used to:
.
- Automatically prove to the Let's Encrypt CA that you control the website
- Obtain a browser-trusted certificate and set it up on your web server
- Keep track of when your certificate is going to expire, and renew it
- Help you revoke the certificate if that ever becomes necessary.
.
This package contains the Apache plugin to the main application.
Homepage: https://letsencrypt.org/
Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:5.0.3-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
libXfixes provides an X Window System client interface to the 'XFIXES'
extension to the X protocol.
.
It provides support for Region types, and some cursor functions.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXfixes
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libltdl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 921
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-2
Replaces: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20)
Provides: libltdl3-dev, libltdl7-dev
Depends: libltdl7 (= 2.4.6-2)
Recommends: libtool
Suggests: libtool-doc
Conflicts: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20), libtool1.4
Description: System independent dlopen wrapper for GNU libtool
This package contains the header files and static libraries for the
libltdl package.
.
A small library that aims at hiding the various difficulties of
dlopening libraries from programmers. It is a system independent
dlopen wrapper for GNU libtool.
.
It supports the following dlopen interfaces:
* dlopen (Solaris, Linux and various BSD flavors)
* shl_load (HP-UX)
* LoadLibrary (Win16 and Win32)
* load_add_on (BeOS)
* GNU DLD (emulates dynamic linking for static libraries)
* libtool's dlpreopen
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>
Homepage: http://www.gnu.org/software/libtool/
Package: po-debconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 412
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.0.20
Depends: perl, gettext (>= 0.16), intltool-debian (>= 0.34.2+20060512)
Recommends: libmail-sendmail-perl, libcompress-zlib-perl
Suggests: libmail-box-perl
Description: tool for managing templates file translations with gettext
This package is an alternative to debconf-utils, and provides tools
for managing translated debconf templates files with common gettext
utilities.
Original-Maintainer: Herbert Parentes Fortes Neto <hpfn@debian.org>
Package: linux-image-5.4.0-1030-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9110
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1030.31~18.04.1
Config-Version: 5.4.0-1030.31~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1030-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1030-aws
Conflicts: linux-image-unsigned-5.4.0-1030-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: mime-support
Status: install ok installed
Priority: important
Section: net
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.60ubuntu1
Recommends: bzip2, file, xz-utils
Conffiles:
/etc/mime.types 4561fade4c4fc48e526e72871c470eec
/etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
As these files can be used by all MIME compliant programs, they
have been moved into their own package that others can depend upon.
.
Other packages add themselves as viewers/editors/composers/etc by
using the provided "update-mime" program.
.
In addition, the commands "see", "edit", "compose", and "print"
will display, alter, create, and print (respectively) any file using
a program determined from the entries in the mime.types and mailcap
files.
Original-Maintainer: Mime-Support Maintainers <mime-support@plessy.org>
Package: gsettings-desktop-schemas
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.28.0-1ubuntu1
Depends: dconf-gsettings-backend | gsettings-backend
Breaks: gnome-control-center (<< 1:3.19.92), gnome-settings-daemon (<< 3.19.92), gnome-shell (<< 3.10.0), mutter (<< 3.19.92), nautilus (<< 3.7.92)
Description: GSettings desktop-wide schemas
gsettings-desktop-schemas contains a collection of GSettings schemas for
settings shared by various components of a desktop.
Homepage: http://www.gnome.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libcairo2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.15.10-2ubuntu0.1
Provides: libcairo-dev
Depends: libcairo2 (= 1.15.10-2ubuntu0.1), libcairo-gobject2 (= 1.15.10-2ubuntu0.1), libcairo-script-interpreter2 (= 1.15.10-2ubuntu0.1), libfontconfig1-dev (>= 2.2.95), libfreetype6-dev (>= 2.1.10), libx11-dev, libxrender-dev (>= 0.6), libxext-dev, libpng-dev, libsm-dev, libpixman-1-dev (>= 0.22.0), libxcb1-dev (>= 1.6), libxcb-render0-dev (>= 1.6), libxcb-shm0-dev, libglib2.0-dev
Suggests: libcairo2-doc
Description: Development files for the Cairo 2D graphics library
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends.
.
This package contains the development libraries, header files needed by
programs that want to compile with Cairo.
Homepage: https://cairographics.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libio-socket-inet6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.72-2
Depends: perl, libsocket6-perl
Description: object interface for AF_INET6 domain sockets
IO::Socket::INET6 provides an object interface to create and use sockets
in the AF_INET6 domain. It is built upon the IO::Socket interface and
inherits all the methods defined by IO::Socket.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-Socket-INET6
Package: libxml-namespacesupport-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.12-1
Depends: perl
Description: Perl module for supporting simple generic namespaces
XML::NamespaceSupport offers a simple way to process namespace-based XML
names. It also helps maintain a prefix-to-namespace URI map and provides a
number of basic checks.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-NamespaceSupport
Package: ureadahead
Status: install ok triggers-pending
Priority: required
Section: admin
Installed-Size: 73
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: amd64
Version: 0.100.0-20
Replaces: readahead
Provides: readahead
Depends: e2fslibs (>= 1.37), libblkid1 (>= 2.16), libc6 (>= 2.4), libnih1 (>= 1.0.0), init-system-helpers (>= 1.18~)
Conflicts: readahead, systemd (<< 217)
Description: Read required files in advance
über-readahead is used during boot to read files in advance of when
they are needed such that they are already in the page cache,
improving boot performance.
.
Its data files are regenerated on the first boot after install, and
either monthly thereafter or when packages with init scripts or
configs are installed or updated.
.
ureadahead requires a kernel patch included in the Ubuntu kernel.
Triggers-Pending: /etc/init.d
Package: php5.6-xsl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 280
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Depends: php5.6-common, php5.6-xml
Description: XSL module for PHP (dummy)
This package is a transitional dummy package and can be safely
removed.
Homepage: http://www.php.net/
Package: python3
Status: install ok installed
Priority: important
Section: python
Installed-Size: 187
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.6.7-1~18.04
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.6 (>= 3.6.7-1~), libpython3-stdlib (= 3.6.7-1~18.04)
Pre-Depends: python3-minimal (= 3.6.7-1~18.04)
Suggests: python3-doc (>= 3.6.7-1~18.04), python3-tk (>= 3.6.7-1~), python3-venv (>= 3.6.7-1~18.04)
Description: interactive high-level object-oriented language (default python3 version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python 3 version (currently v3.6).
Homepage: https://www.python.org/
Cnf-Extra-Commands: python
Cnf-Priority-Bonus: 5
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: update-notifier-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1378
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: update-notifier
Version: 3.192.1.3
Replaces: update-notifier (<< 0.75.1)
Depends: python3:any, python3-apt, python3-dbus, python3-debian, python3-debconf | debconf (<< 1.5.64~), patch, update-manager-core (>= 1:17.04.2)
Pre-Depends: dpkg (>= 1.15.7.2), apt (>= 1.1~)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Suggests: policykit-1
Conffiles:
/etc/apt/apt.conf.d/10periodic 03ddb526e156071de0667748b6ac1d33
/etc/apt/apt.conf.d/15update-stamp b9de0ac9e2c9854b1bb213e362dc4e41
/etc/apt/apt.conf.d/20archive 9e28a07261e6ad5ede22d5286291ca23
/etc/apt/apt.conf.d/99update-notifier 8c8636b1123964162e9a1127f237ba7b
/etc/cron.daily/update-notifier-common ac3a73308ace1070b9980c2bc56fb416
/etc/cron.weekly/update-notifier-common 0cfcd026510cd5005e6eb703ccde3d73
/etc/update-motd.d/90-updates-available 65bcef3f6859b2c2a15649e29d3654b7
/etc/update-motd.d/95-hwe-eol 070a28086b1a1fc7548ac3cfe493d23f
/etc/update-motd.d/98-fsck-at-reboot 16003ee8c8c80a565a98a7696cee04c0
/etc/update-motd.d/98-reboot-required 1c4d534d0abd44d566899e47c4f22786
Description: Files shared between update-notifier and other packages
Apt setup files and reboot notification scripts shared between
update-notifier and other packages, notably for server use cases.
Package: libio-pty-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:1.08-1.1build4
Provides: libio-tty-perl
Depends: libc6 (>= 2.4), perl (>= 5.26.0-4), perlapi-5.26.0
Description: Perl module for pseudo tty IO
IO::Pty provides I/O handles to the master- and slave-side of a
pseudo tty.
Original-Maintainer: Jörgen Hägg <jh@debian.org>
Package: libwind0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libc6 (>= 2.14), libcom-err2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - stringprep implementation
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the stringprep library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: gsfonts
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 4439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:8.11+urwcyr1.0.7~pre44-4.4
Conflicts: gs (<< 5.50-5), gs-aladdin (<< 6.50-4), gsfonts-x11 (<< 0.13)
Conffiles:
/etc/ghostscript/fontmap.d/10gsfonts.conf 39b53e1126184b434b52585a113fe125
Description: Fonts for the Ghostscript interpreter(s)
These are free look-alike fonts of the Adobe PostScript fonts.
Recommended for all flavors of Ghostscript (gs-gpl, gs-afpl and gs-esp).
Original-Maintainer: Masayuki Hatta (mhatta) <mhatta@debian.org>
Homepage: http://www.ghostscript.com/
Package: linux-image-5.3.0-1023-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9138
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1023.25~18.04.1
Config-Version: 5.3.0-1023.25~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1023-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1023-aws
Conflicts: linux-image-unsigned-5.3.0-1023-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: ttf-dejavu-core
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: fonts-dejavu
Version: 2.37-1
Depends: fonts-dejavu-core
Description: transitional dummy package
This package is a dummy transitional package. It can be safely removed.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: http://dejavu-fonts.org/
Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cffi
Version: 1.11.5-1
Replaces: python3-cffi (<< 1)
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.1~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python3-cffi (<< 1)
Description: Foreign Function Interface for Python 3 calling C code - runtime
Convenient and reliable way of calling C code from Python 3.
.
The aim of this project is to provide a convenient and reliable way of calling
C code from Python. It keeps Python logic in Python, and minimises the C
required. It is able to work at either the C API or ABI level, unlike most
other approaches, that only support the ABI level.
.
This package contains the runtime support for pre-built cffi modules.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://cffi.readthedocs.org/
Package: libasan4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1441
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.23), libgcc1
Description: AddressSanitizer -- a fast memory error detector
AddressSanitizer (ASan) is a fast memory error detector. It finds
use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-modules-5.4.0-1068-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69654
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1068.72~18.04.1
Config-Version: 5.4.0-1068.72~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libgcrypt20
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.8.1-4ubuntu1.3
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.25)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
libgcrypt contains cryptographic functions. Many important free
ciphers, hash algorithms and public key signing algorithms have been
implemented:
.
Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
Poly1305, Camellia, ChaCha20, IDEA, Salsa, Blake-2, CRC, MD2, MD4, MD5,
RIPE-MD160, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512,
SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
(Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: xxd
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: vim
Version: 2:8.0.1453-1ubuntu1.13
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.3.4)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
xxd creates a hex dump of a given file or standard input. It can also convert
a hex dump back to its original binary form.
Homepage: https://vim.sourceforge.io/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Package: libtext-levenshtein-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.13-1
Depends: perl, perl (>= 5.19.7) | libunicode-collate-perl (>= 1.04)
Description: implementation of the Levenshtein edit distance
Text::Levenshtein implements the Levenshtein edit distance. The Levenshtein
edit distance is a measure of the degree of proximity between two strings.
This distance is the number of substitutions, deletions or insertions
("edits") needed to transform one string into the other one (and vice versa).
When two strings have distance 0, they are the same.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-Levenshtein
Package: libilmbase-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 583
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ilmbase
Version: 2.2.0-11ubuntu2
Replaces: libopenexr-dev (<< 1.6)
Depends: libilmbase12 (= 2.2.0-11ubuntu2)
Breaks: libopenexr-dev (<< 1.6)
Description: development files for IlmBase
This package provides the development files for IlmBase, a set of
utility libraries released by ILM and used by OpenEXR. Install this
package if you want to compile a program that makes use of these
libraries.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: http://www.openexr.com
Package: php5.6-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 116
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-curl
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14), libcurl4 (>= 7.18.0)
Description: CURL module for PHP
This package provides the CURL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: python3-olefile
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: olefile
Version: 0.45.1-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python module to read/write MS OLE2 files
Python package to parse, read and write Microsoft OLE2 files (also called
Structured Storage, Compound File Binary Format or Compound Document File
Format), such as Microsoft Office 97-2003 documents, vbaProject.bin in
MS Office 2007+ files, Image Composer and FlashPix files, Outlook MSG files,
StickyNotes, several Microscopy file formats, McAfee antivirus quarantine
files, etc.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.decalage.info/olefile
Package: libllvm6.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59703
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-6.0
Version: 1:6.0-1ubuntu2
Replaces: libllvm3.9v4
Depends: libc6 (>= 2.15), libedit2 (>= 2.11-20080614), libffi6 (>= 3.0.4), libgcc1 (>= 1:3.4), libstdc++6 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.2.0)
Breaks: libllvm3.9v4
Description: Modular compiler and toolchain technologies, runtime library
LLVM is a collection of libraries and tools that make it easy to build
compilers, optimizers, just-in-time code generators, and many other
compiler-related programs.
.
This package contains the LLVM runtime library.
Homepage: http://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Package: geoip-database
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 6834
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 20180315-1
Recommends: libgeoip1
Description: IP lookup command line tools that use the GeoIP library (country database)
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the free GeoLiteCountry database.
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: http://www.maxmind.com/
Package: libglib2.0-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.56.4-0ubuntu0.18.04.9
Replaces: libglib2.0-bin (<< 2.54.2-5~), libglib2.0-dev (<< 2.53)
Depends: python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libglib2.0-0 (>= 2.39.4), python3-distutils
Breaks: libglib2.0-bin (<< 2.54.2-5~), libglib2.0-dev (<< 2.53)
Description: Development utilities for the GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package is needed to compile programs against libglib2.0-0. It contains
development utilities typically run during compilation and should not be
installed directly. Use libglib2.0-dev instead.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: sudo
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1724
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.8.21p2-3ubuntu1.6
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.27), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules, lsb-base
Conflicts: sudo-ldap
Conffiles:
/etc/pam.d/sudo aa40f755f85bb33c9e79bd537e2979be
/etc/sudoers edcf6528783ecffd3f248c8089dc298e
/etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6
Description: Provide limited super user privileges to specific users
Sudo is a program designed to allow a sysadmin to give limited root
privileges to users and log root activity. The basic philosophy is to give
as few privileges as possible but still allow people to get their work done.
.
This version is built with minimal shared library dependencies, use the
sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: http://www.sudo.ws/
Original-Maintainer: Bdale Garbee <bdale@gag.com>
Package: iso-codes
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 18648
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.79-1
Suggests: isoquery
Description: ISO language, territory, currency, script codes and their translations
This package provides the ISO 639, ISO 639-3, and ISO 639-5 language
code lists, the ISO 4217 currency code list, the ISO 3166 territory
code list, the ISO 3166-2 sub-territory list, and the ISO 15924
script code list as XML files.
.
More importantly, it also provides their translations to be used by
other programs.
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Homepage: https://salsa.debian.org/iso-codes-team/iso-codes
Package: libjs-inherits
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: node-inherits
Version: 2.0.3-1
Description: Exposes inherits function from Node.js environment
node-inherits exposes standard inherits implementation of Node.js util
module, and allows bundlers such as browserify to not include full util
package in client code.
.
It is recommended to use this module for all code that requires only
the inherits function and that has a chance to run in a browser too.
.
This is the browser module.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/inherits
Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 319
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.34-1ubuntu0.18.04.2
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.11)
Description: PNG library - runtime (version 1.6)
libpng is a library implementing an interface for reading and writing
PNG (Portable Network Graphics) format files.
.
This package contains the runtime library files needed to run software
using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: linux-modules-5.4.0-1039-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69379
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1039.41~18.04.1
Config-Version: 5.4.0-1039.41~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-tunnel-agent
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.3.1-1
Depends: nodejs
Description: HTTP proxy tunneling agent module for Node.js
node-tunnel-agent is an HTTP CONNECT tunnel client module
for Node.js.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/mikeal/tunnel-agent
Package: libfastjson4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 0.99.8-2
Depends: libc6 (>= 2.14)
Description: fast json library for C
The libfastjson library is a fork from json-c with a focus on performance.
.
This package contains the shared library.
Original-Maintainer: Michael Biebl <biebl@debian.org>
Homepage: https://github.com/rsyslog/libfastjson
Package: libadns1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: adns
Version: 1.5.0~rc1-1.1ubuntu1
Depends: libc6 (>= 2.16)
Suggests: adns-tools
Description: Asynchronous-capable DNS client library
adns is a resolver library for C (and C++) programs. In contrast
with the existing interfaces, gethostbyname et al and libresolv, it
can be used in an asynchronous, non-blocking manner, and has a
convenient interface which doesn't require the application to handle
any DNS data formats. Many queries can be handled simultaneously.
.
This package contains the runtime library.
Homepage: http://www.chiark.greenend.org.uk/~ian/adns/
Original-Maintainer: Ian Jackson <ijackson@chiark.greenend.org.uk>
Package: gcc-7
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 27325
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 7.5.0-3ubuntu1~18.04
Replaces: cpp-7 (<< 7.1.1-8), gccgo-7 (<< 7.5.0-3ubuntu1~18.04)
Provides: c-compiler
Depends: cpp-7 (= 7.5.0-3ubuntu1~18.04), gcc-7-base (= 7.5.0-3ubuntu1~18.04), libcc1-0 (>= 7.5.0-3ubuntu1~18.04), binutils (>= 2.30), libgcc-7-dev (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libgmp10 (>= 2:5.0.1~), libisl19 (>= 0.15), libmpc3, libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Suggests: gcc-7-multilib, gcc-7-doc (>= 7), gcc-7-locales (>= 7), libgcc1-dbg (>= 1:7.5.0-3ubuntu1~18.04), libgomp1-dbg (>= 7.5.0-3ubuntu1~18.04), libitm1-dbg (>= 7.5.0-3ubuntu1~18.04), libatomic1-dbg (>= 7.5.0-3ubuntu1~18.04), libasan4-dbg (>= 7.5.0-3ubuntu1~18.04), liblsan0-dbg (>= 7.5.0-3ubuntu1~18.04), libtsan0-dbg (>= 7.5.0-3ubuntu1~18.04), libubsan0-dbg (>= 7.5.0-3ubuntu1~18.04), libcilkrts5-dbg (>= 7.5.0-3ubuntu1~18.04), libmpx2-dbg (>= 7.5.0-3ubuntu1~18.04), libquadmath0-dbg (>= 7.5.0-3ubuntu1~18.04)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libncursesw5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 343
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Depends: libtinfo5 (= 6.1-1ubuntu1.18.04.1), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.17025-1
Depends: perl
Description: Perl module for error/exception handling in an OO-ish way
The Error module provides two interfaces. Firstly "Error" provides a
procedural interface to exception handling. Secondly "Error" is a base class
for errors/exceptions that can either be thrown, for subsequent catch, or can
simply be recorded.
.
Errors in the class "Error" should not be thrown directly, but the user
should throw errors from a sub-class of "Error".
.
Warning: Using the "Error" module is no longer recommended due to the
black-magical nature of its syntactic sugar, which often tends to break. Its
maintainers have stopped actively writing code that uses it, and discourage
people from doing so.
.
Recommended alternatives are Exception::Class (libexception-class-perl),
Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
(libtry-tiny-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Error
Package: libdjvulibre21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1618
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.27.1-8ubuntu0.4
Replaces: libdjvulibre1, libdjvulibre15
Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libjpeg8 (>= 8c), libstdc++6 (>= 5), libdjvulibre-text (>= 3.5.27.1-8ubuntu0.4)
Conflicts: libdjvulibre1
Description: Runtime support for the DjVu image format
DjVu runtime library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <bap@debian.org>
Package: linux-image-5.4.0-1068-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10307
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1068.72~18.04.1
Config-Version: 5.4.0-1068.72~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1068-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1068-aws
Conflicts: linux-image-unsigned-5.4.0-1068-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1068.72~18.04.1)
Package: dconf-service
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: d-conf
Version: 0.26.0-2ubuntu3
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.44.0), libdconf1 (= 0.26.0-2ubuntu3)
Recommends: dconf-gsettings-backend
Description: simple configuration storage system - D-Bus service
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains the DConf service, which applications talk to
using D-Bus in order to obtain their settings. It is mostly used by the
GSettings backend.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.58.0-2ubuntu3.24
Depends: libc6 (>= 2.17), libcurl4 (= 7.58.0-2ubuntu3.24), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
curl is a command line tool for transferring data with URL syntax, supporting
DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
based upload, proxies, cookies, user+password authentication (Basic, Digest,
NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
busload of other useful tricks.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: gettext
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 6482
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.19.8.1-6ubuntu0.3
Depends: libc6 (>= 2.17), libcroco3 (>= 0.6.2), libgomp1 (>= 4.9), libtinfo5 (>= 6), libunistring2 (>= 0.9.7), libxml2 (>= 2.9.1), gettext-base, dpkg (>= 1.15.4) | install-info
Recommends: curl | wget | lynx
Suggests: gettext-doc, autopoint, libasprintf-dev, libgettextpo-dev
Breaks: autopoint (<= 0.17-11)
Description: GNU Internationalization utilities
Interesting for authors or maintainers of other packages or programs
which they want to see internationalized.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: ltrace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.7.3-6ubuntu1
Depends: libc6 (>= 2.14), libelf1 (>= 0.131), libselinux1 (>= 1.32)
Conffiles:
/etc/ltrace.conf f67e1097893416df68c30b65ed908992
Description: Tracks runtime library calls in dynamically linked programs
ltrace is a debugging program which runs a specified command until it
exits. While the command is executing, ltrace intercepts and records
the dynamic library calls which are called by
the executed process and the signals received by that process.
It can also intercept and print the system calls executed by the program.
.
The program to be traced need not be recompiled for this, so you can
use it on binaries for which you don't have the source handy.
.
You should install ltrace if you need a sysadmin tool for tracking the
execution of processes.
Original-Maintainer: Juan Cespedes <cespedes@debian.org>
Package: nodejs
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 18063
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.10.0~dfsg-2ubuntu0.4
Replaces: nodejs-legacy
Provides: nodejs-abi-57
Depends: libc-ares2 (>= 1.11.0~rc1), libc6 (>= 2.14), libgcc1 (>= 1:3.4), libhttp-parser2.7.1 (>= 2.7.1), libicu60 (>= 60.1-1~), libnghttp2-14 (>= 1.25.0), libssl1.0.0 (>= 1.0.2~beta3), libstdc++6 (>= 5.2), libuv1 (>= 1.18.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates, nodejs-doc
Conflicts: nodejs-legacy
Description: evented I/O for V8 javascript
Node.js is a platform built on Chrome's JavaScript runtime for easily
building fast, scalable network applications. Node.js uses an
event-driven, non-blocking I/O model that makes it lightweight and
efficient, perfect for data-intensive real-time applications that run
across distributed devices.
.
Node.js is bundled with several useful libraries to handle server
tasks:
.
System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
Homepage: http://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-2ubuntu0.1
Depends: libaprutil1 (= 1.6.1-2ubuntu0.1), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the SQLite3 database driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1588
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4.18-2ubuntu1.3
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
/etc/bash.bashrc 3aa8b92d1dd6ddf4daaedc019662f1dc
/etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
/etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
/etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
Bash is an sh-compatible command language interpreter that executes
commands read from the standard input or from a file. Bash also
incorporates useful features from the Korn and C shells (ksh and csh).
.
Bash is ultimately intended to be a conformant implementation of the
IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
.
The Programmable Completion Code, by Ian Macdonald, is now found in
the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 3006
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.30-21ubuntu1~18.04.9
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0), binutils-common (= 2.30-21ubuntu1~18.04.9)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: linux-image-5.4.0-1066-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10307
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1066.69~18.04.1
Config-Version: 5.4.0-1066.69~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1066-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1066-aws
Conflicts: linux-image-unsigned-5.4.0-1066-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1066.69~18.04.1)
Package: python3-mock
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 281
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-mock
Version: 2.0.0-3
Depends: python3-pbr (>= 1.3), python3-six (>= 1.9), python3:any (>= 3.3.2-2~)
Suggests: python-mock-doc
Description: Mocking and Testing Library (Python3 version)
mock provides a core mock.Mock class that is intended to reduce the
need to create a host of trivial stubs throughout your test suite.
After performing an action, you can make assertions about which methods
/ attributes were used and arguments they were called with. You can
also specify return values and set specific attributes in the normal
way.
.
This package contains the Python 3 version of the library.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/testing-cabal/mock
Package: node-balanced-match
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.4.2-1
Depends: nodejs
Description: Match balanced character pairs in Node.js
node-balanced-match allows matching balanced string pairs, like { and } or
<b> and </b> in Node.js.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/juliangruber/balanced-match
Package: linux-image-4.15.0-1063-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 8267
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1063.67
Config-Version: 4.15.0-1063.67
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-4.15.0-1063-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-doc-4.15.0 | linux-aws-source-4.15.0, linux-aws-tools, linux-headers-4.15.0-1063-aws
Description: Linux kernel image for version 4.15.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 4.15.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3000-2
Replaces: timedate
Provides: timedate
Depends: perl
Breaks: timedate
Description: collection of modules to manipulate date/time information
TimeDate is a collection of Perl modules useful for manipulating date and
time information. Date::Parse can parse absolute date specifications in a
wide variety of input formats and many languages (via Date::Language).
.
This package also includes Date::Format, which can format dates into strings,
as well as Time::Zone, which contains miscellaneous time zone functions.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/TimeDate
Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 381
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.9-1ubuntu0.1
Depends: libc6 (>= 2.14)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
LittleCMS 2 intends to be a small-footprint color management engine, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC) of color management. LittleCMS 2 is a full
implementation of ICC specification 4.2 plus all addendums. It fully supports
all V2 and V4 profiles, including abstract, devicelink and named color
profiles.
.
This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <tweber@debian.org>
Package: libnet-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 133
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.26-1
Depends: perl
Description: Perl extension for manipulating IPv4/IPv6 addresses
Net::IP provides functions to deal with IPv4/IPv6 addresses.
The module can be used as a class, allowing the user to instantiate IP
objects, which can be single IP addresses, prefixes, or ranges of addresses.
There is also a procedural way of accessing most of the functions. Most
subroutines can take either IPv4 or IPv6 addresses transparently.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/Net-IP/
Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3ubuntu7.4
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
This package includes manpages that are relevant to the various ISC DHCP
packages.
.
The dhcp-options manpage describes available options for dhcpd and dhclient.
The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Package: lxd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 19896
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.1-0ubuntu1~18.04.1
Depends: acl, adduser, dnsmasq-base, ebtables, iproute2, iptables, liblxc1 (>= 2.1.0~), lsb-base (>= 3.0-6), lxcfs, lxd-client (= 3.0.1-0ubuntu1~18.04.1), passwd (>= 1:4.1.5.1-1ubuntu5~), rsync, squashfs-tools, uidmap (>= 1:4.1.5.1-1ubuntu5~), xdelta3, xz-utils, libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libsqlite3-0 (>= 3.7.15)
Recommends: apparmor
Suggests: criu, lxd-tools
Conffiles:
/etc/dnsmasq.d-available/lxd c72be7e51163b9fa73e2eb8986958986
/etc/init.d/lxd 9d2a101c9d9a5484f16607f4d7e10c4d
/etc/logrotate.d/lxd 312901c6c80bd878756257952fd24068
/etc/sysctl.d/10-lxd-inotify.conf 278c217e18c2aae80d847838869e4ffd
Description: Container hypervisor based on LXC - daemon
LXD offers a REST API to remotely manage containers over the network,
using an image based workflow and with support for live migration.
.
This package contains the LXD daemon.
Built-Using: golang-1.10 (= 1.10.1-1ubuntu2)
Homepage: https://linuxcontainers.org/
Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.1-1
Depends: libc6 (>= 2.4)
Description: SMBIOS/DMI table decoder
Dmidecode reports information about the system's hardware as described in the
system BIOS according to the SMBIOS/DMI standard.
.
This information typically includes system manufacturer, model name, serial
number, BIOS version, asset tag as well as a lot of other details of varying
level of interest and reliability depending on the manufacturer. This will
often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
USB).
.
Beware that DMI data have proven to be too unreliable to be blindly trusted.
Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Original-Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net>
Homepage: http://nongnu.org/dmidecode/
Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-3.1ubuntu0.18.04.1
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
JBIG-KIT provides a portable library of compression and decompression functions
with a documented interface that you can include very easily into your image or
document processing software.
.
This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Replaces: e2fsprogs (<< 1.34-1)
Depends: libc6 (>= 2.25)
Recommends: uuid-runtime
Description: Universally Unique ID library
The libuuid library generates and parses 128-bit Universally Unique
IDs (UUIDs). A UUID is an identifier that is unique within the space
of all such identifiers across both space and time. It can be used for
multiple purposes, from tagging objects with an extremely short lifetime
to reliably identifying very persistent objects across a network.
.
See RFC 4122 for more information.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: libcairo-script-interpreter2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.15.10-2ubuntu0.1
Depends: libc6 (>= 2.14), libcairo2 (>= 1.14.0), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), liblzo2-2, zlib1g (>= 1:1.1.4)
Description: Cairo 2D vector graphics library (script interpreter)
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends.
.
This package contains the script interpreter for executing and manipulating
cairo execution traces.
Homepage: https://cairographics.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1061-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69567
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1061.64~18.04.1
Config-Version: 5.4.0-1061.64~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.12-1
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
GNU libsigsegv is a library that allows handling page faults in a
portable way. It is used e.g. for generational garbage collectors
and stack overflow handlers.
.
This package contains the shared library.
Original-Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Homepage: http://www.gnu.org/software/libsigsegv/
Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpm
Version: 1.20.7-5
Depends: libc6 (>= 2.15)
Suggests: gpm
Description: General Purpose Mouse - shared library
This package provides a library that handles mouse requests
and delivers them to applications. See the description for the 'gpm'
package for more information.
Original-Maintainer: Axel Beckert <abe@debian.org>
Homepage: https://nico.schottelius.org/software/gpm/
Package: libgtk-3-common
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 408
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.22.30-1ubuntu4
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: libgtk-3-0
Conffiles:
/etc/gtk-3.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf
Description: common files for the GTK+ graphical user interface library
GTK+ is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK+ is suitable
for projects ranging from small one-off tools to complete application
suites.
.
This package contains the common files which the libraries need.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libdb5.3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1729
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-13.1ubuntu1.1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
This is the runtime package for programs that use the v5.3 Berkeley
database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Package: linux-modules-5.3.0-1028-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64601
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1028.30~18.04.1
Config-Version: 5.3.0-1028.30~18.04.1
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1196
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.84-1ubuntu0.2
Depends: perl (>= 5.26.1-6ubuntu0.3), perl-openssl-abi-1.1, perlapi-5.26.1, libc6 (>= 2.14), libssl1.1 (>= 1.1.1)
Description: Perl module for Secure Sockets Layer (SSL)
Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
(SSL) functions of the SSLeay library directly from your perl scripts. It
is useful if you want to program robots that access secure web servers or
if you want to build your own applications over SSL encrypted tunnels. If
you just want to view web pages on https servers, you do not need this -
your web browser already knows to do that.
Homepage: https://metacpan.org/release/Net-SSLeay
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.4ubuntu1
Depends: libc6-dev | libc-dev, gcc (>= 4:7.2), g++ (>= 4:7.2), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
If you do not plan to build Debian packages, you don't need this
package. Starting with dpkg (>= 1.14.18) this package is required
for building Debian packages.
.
This package contains an informational list of packages which are
considered essential for building Debian packages. This package also
depends on the packages on that list, to make it easy to have the
build-essential packages installed.
.
If you have this package installed, you only need to install whatever
a package specifies as its build-time dependencies to build the
package. Conversely, if you are determining what your package needs
to build-depend on, you can always leave out the packages this
package depends on.
.
This package is NOT the definition of what packages are
build-essential; the real definition is in the Debian Policy Manual.
This package contains merely an informational list, which is all
most people need. However, if this package and the manual disagree,
the manual is correct.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: php5.6-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 180
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-opcache
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.27)
Description: Zend OpCache module for PHP
This package provides the Zend OpCache module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libldap-common
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.4.45+dfsg-1ubuntu1.11
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
/etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP common files for libraries
These are common files for the run-time libraries for the OpenLDAP
(Lightweight Directory Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 2793
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:8.0.1453-1ubuntu1.13
Provides: editor
Depends: vim-common (= 2:8.0.1453-1ubuntu1.13), vim-runtime (= 2:8.0.1453-1ubuntu1.13), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libgpm2 (>= 1.20.7), libpython3.6 (>= 3.6.5), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
Vim is an almost compatible version of the UNIX editor Vi.
.
Many new features have been added: multi level undo, syntax
highlighting, command line history, on-line help, filename
completion, block operations, folding, Unicode support, etc.
.
This package contains a version of vim compiled with a rather
standard set of features. This package does not provide a GUI
version of Vim. See the other vim-* packages if you need more
(or less).
Homepage: https://vim.sourceforge.io/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Package: libpthread-stubs0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpthread-stubs
Version: 0.3-4
Description: pthread stubs not provided by native libc, development files
This library provides weak aliases for pthread functions not provided
in libc or otherwise available by default. Libraries like libxcb rely
on pthread stubs to use pthreads optionally, becoming thread-safe when
linked to libpthread, while avoiding any performance hit when running
single-threaded. libpthread-stubs supports this behavior even on
platforms which do not supply all the necessary pthread stubs.
.
On platforms which already supply all the necessary pthread stubs, this
package ships only the pkg-config file pthread-stubs.pc, to allow
libraries to unconditionally express a dependency on pthread-stubs and
still obtain correct behavior.
Original-Maintainer: XCB Developers <xcb@lists.freedesktop.org>
Package: linux-modules-5.4.0-1041-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69381
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1041.43~18.04.1
Config-Version: 5.4.0-1041.43~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2954
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-1
Replaces: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Breaks: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Conffiles:
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
/etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
/etc/fonts/conf.avail/57-dejavu-sans-mono.conf d3e4d007a9ac6c47243b5994f1d195e3
/etc/fonts/conf.avail/57-dejavu-sans.conf 29cfe6c581fe2dbc222525ce00097002
/etc/fonts/conf.avail/57-dejavu-serif.conf 1dca2f4ec93842e94f3919f7e0c8f7a9
/etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
/etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
/etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
DejaVu provides an expanded version of the Vera font family aiming for
quality and broader Unicode coverage while retaining the original Vera
style. DejaVu currently works towards conformance with the Multilingual
European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
fonts provide serif, sans and monospaced variants.
.
This package only contains the sans, sans-bold, serif, serif-bold,
mono and mono-bold variants. For additional variants, see the
ttf-dejavu-extra package.
.
DejaVu fonts are intended for use on low-resolution devices (mainly
computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: http://dejavu-fonts.org/
Package: libgvpr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 530
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Replaces: libgvpr1
Depends: libc6 (>= 2.15), libcdt5, libcgraph6
Conflicts: libgraphviz4
Description: rich set of graph drawing tools - gvpr library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the gvpr library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: poppler-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 12219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.4.8-2
Replaces: cmap-adobe-cns1 (<= 0+20090930-2), cmap-adobe-gb1 (<= 0+20090930-2), cmap-adobe-japan1 (<= 0+20090930-2), cmap-adobe-japan2 (<= 0+20090930-2), cmap-adobe-korea1 (<= 1.20100103-3), gs-cjk-resource (<= 1.20100103-3)
Provides: cmap-adobe-cns1, cmap-adobe-gb1, cmap-adobe-japan1, cmap-adobe-japan2, cmap-adobe-korea1, gs-cjk-resource
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~)
Breaks: cmap-adobe-cns1 (<= 0+20090930-2), cmap-adobe-gb1 (<= 0+20090930-2), cmap-adobe-japan1 (<= 0+20090930-2), cmap-adobe-japan2 (<= 0+20090930-2), cmap-adobe-korea1 (<= 1.20100103-3), gs-aladdin (<= 6.50-5), gs-cjk-resource (<= 1.20100103-3)
Enhances: ghostscript
Conffiles:
/etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33
/etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0
/etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4
/etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c
/etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed
Description: encoding data for the poppler PDF rendering library
This package provides the CMap tables required to display PDF documents
containing CJK characters with libpoppler. They were previously provided
by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and
gs-cjk-resource.
.
Users who want to view or create PDF files in Chinese, Japanese, or
Korean without embedded fonts will need this package.
Original-Maintainer: Hideki Yamane <henrich@debian.org>
Homepage: https://poppler.freedesktop.org/
Package: python3-twisted-bin
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: twisted
Version: 17.9.0-2ubuntu0.3
Depends: python3 (<< 3.7), python3 (>= 3.6~), libc6 (>= 2.4)
Suggests: python3-twisted-bin-dbg
Description: Event-based framework for internet applications
It includes a web server, a telnet server, a multiplayer RPG engine, a
generic client and server for remote object access, and APIs for creating
new protocols.
Homepage: https://twistedmatrix.com/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: initramfs-tools-core
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 268
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.130ubuntu3.6
Replaces: initramfs-tools (<< 0.121~)
Depends: busybox-initramfs (>= 1:1.22.0-17~), initramfs-tools-bin (= 0.130ubuntu3.6), klibc-utils (>= 2.0.4-8~), cpio, kmod | module-init-tools, udev, coreutils (>= 8.24)
Suggests: bash-completion
Breaks: busybox-initramfs (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~)
Conffiles:
/etc/initramfs-tools/initramfs.conf 1f4c9bc107b078479d0c5303ba477548
Description: generic modular initramfs generator (core tools)
This package contains the mkinitramfs program that can be used to
create a bootable initramfs for a Linux kernel. The initramfs should
be loaded along with the kernel and is then responsible for mounting
the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: g++-7
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 26062
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Provides: c++-compiler, c++abi2-dev
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), gcc-7 (= 7.5.0-3ubuntu1~18.04), libstdc++-7-dev (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.14), libgmp10 (>= 2:5.0.1~), libisl19 (>= 0.15), libmpc3, libmpfr6 (>= 3.1.3), zlib1g (>= 1:1.1.4)
Suggests: g++-7-multilib, gcc-7-doc (>= 7), libstdc++6-7-dbg (>= 7.5.0-3ubuntu1~18.04)
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: python3-commandnotfound
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: command-not-found
Version: 18.04.5
Replaces: command-not-found (<< 0.3ubuntu7)
Depends: command-not-found-data (= 18.04.5), lsb-release, python3-apt, python3-gdbm, python3:any (>= 3.3.2-2~)
Description: Python 3 bindings for command-not-found.
This package will install the Python 3 library for command_not_found tool.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>
Package: fonts-ubuntu-console
Status: install ok installed
Priority: optional
Section: non-free/fonts
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-ubuntu
Version: 0.83-2
Replaces: fonts-ubuntu-font-family-console (<= 1:0.83-1~)
Breaks: fonts-ubuntu-font-family-console (<= 1:0.83-1~)
Description: console version of the Ubuntu Mono font
The Ubuntu Font Family is a set of contemporary sans-serif fonts developed
between 2010-2011. Dalton Maag performed the font design work and
implementation with funding from Canonical. The fonts have been the default
fonts for Ubuntu since 2010.
.
This package contains the "Ubuntu Mono" font converted to a bitmap version
for Linux console use. These fonts can be loaded from a virtual terminal by
executing "setfont /usr/share/consolefonts/UbuntuMono*.psf" .
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: https://design.ubuntu.com/font/
Package: linux-modules-5.4.0-1029-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65592
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1029.30~18.04.1
Config-Version: 5.4.0-1029.30~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: php5.6-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 527
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-mysql, php-mysqli, php-mysqlnd, php-pdo-mysql, php5.6-mysqli, php5.6-mysqlnd, php5.6-pdo-mysql
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.15)
Description: MySQL module for PHP
This package provides the MySQL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libcilkrts5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.6), libgcc1, libstdc++6
Description: Intel Cilk Plus language extensions (runtime)
Intel Cilk Plus is an extension to the C and C++ languages to support
data and task parallelism.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libdjvulibre-text
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 349
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: djvulibre
Version: 3.5.27.1-8ubuntu0.4
Replaces: djview3 (= 3.5.20-9), djvulibre-desktop (<< 3.5.20-9), libdjvulibre15
Description: Linguistic support files for libdjvulibre
Runtime linguistic support files for the libdjvulibre library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <bap@debian.org>
Package: linux-modules-5.4.0-1034-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65677
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1034.35~18.04.1
Config-Version: 5.4.0-1034.35~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 768
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apt
Version: 1.6.12ubuntu0.2
Depends: apt (= 1.6.12ubuntu0.2), libapt-inst2.0 (>= 1.0.5), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.14), libdb5.3, libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: package management related utility programs
This package contains some less used commandline utilities related
to package management with APT.
.
* apt-extracttemplates is used by debconf to prompt for configuration
questions before installation.
* apt-ftparchive is used to create Packages and other index files
needed to publish an archive of Debian packages
* apt-sortpkgs is a Packages/Sources file normalizer.
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.18.0-3
Depends: libc6 (>= 2.14)
Description: asynchronous event notification library - runtime library
Libuv is the asynchronous library behind Node.js. Very similar to libevent or
libev, it provides the main elements for event driven systems: watching and
waiting for availability in a set of sockets, and some other events like timers
or asynchronous messages. However, libuv also comes with some other extras
like:
* files watchers and asynchronous operations
* a portable TCP and UDP API, as well as asynchronous DNS resolution
* processes and threads management, and a portable inter-process
communications mechanism, with pipes and work queues
* a plugins mechanism for loading libraries dynamically
* interface with external libraries that also need to access the I/O.
.
This package includes the dynamic library against which you can link
your program.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/libuv/libuv
Package: install-info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.5.0.dfsg.1-2
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.14)
Pre-Depends: dpkg (>= 1.16.1)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Description: Manage installed documentation in info format
The install-info utility creates the index of all installed documentation
in info format and makes it available to info readers.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Package: linux-image-5.4.0-1072-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10311
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1072.77~18.04.1
Config-Version: 5.4.0-1072.77~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1072-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1072-aws
Conflicts: linux-image-unsigned-5.4.0-1072-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1072.77~18.04.1)
Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 402
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: php5.6-json
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 76
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-json
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14)
Description: JSON module for PHP
This package provides the JSON module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libeatmydata1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libeatmydata
Version: 105-6
Replaces: eatmydata (<< 82-1)
Depends: libc6 (>= 2.4)
Breaks: eatmydata (<< 82-1)
Description: Library and utilities to disable fsync and friends - shared library
This package contains the actual LD_PRELOAD library (libeatmydata) supporting
the operation of the eatmydata package. Users typically want to use or depend
on the eatmydata package instead of this one, so see its description for
further information.
Original-Maintainer: Mattia Rizzolo <mattia@debian.org>
Homepage: https://launchpad.net/libeatmydata
Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.25-1.2
Replaces: libcap-bin
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains additional utilities.
Original-Maintainer: Christian Kastner <ckk@debian.org>
Homepage: http://sites.google.com/site/fullycapable/
Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 545
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.66
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk3-perl, libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Breaks: apt-listchanges (<< 3.14), ubiquity (<< 17.10.2), update-notifier-common (<< 3.187~)
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
/etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
/etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
Debconf is a configuration management system for debian packages. Packages
use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: debconf-i18n
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 780
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.66
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.66), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
This package provides full internationalization for debconf, including
translations into all available languages, support for using translated
debconf templates, and support for proper display of multibyte character
sets.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-0ubuntu2.2
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>
Package: linux-image-5.4.0-1094-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10316
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1094.102~18.04.1
Config-Version: 5.4.0-1094.102~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1094-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1094-aws
Conflicts: linux-image-unsigned-5.4.0-1094-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1094.102~18.04.1)
Package: node-node-uuid
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: node-uuid
Version: 1.4.7-5
Depends: nodejs, libjs-node-uuid
Description: simple and fast RFC4122 UUID generation - Node.js module
Node-uuid provides simple, fast generation of RFC4122 UUIDs.
.
* Generate RFC4122 version 1 or version 4 UUIDs
* Runs in Node.js and web browsers
* Cryptographically strong random number generation on supporting platforms
* Small footprint
.
This package provides node-uuid usable with Node.js -
an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/broofa/node-uuid
Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3build1
Provides: perl-openssl-abi-1.1
Depends: libc6 (>= 2.2.5), libssl1.1 (>= 1.1.0)
Breaks: libcrypt-openssl-bignum-perl (<< 0.07-2), libcrypt-openssl-dsa-perl (<< 0.18-2), libcrypt-openssl-pkcs10-perl (<< 0.16-2), libcrypt-openssl-pkcs12-perl (<< 0.7-3), libcrypt-openssl-rsa-perl (<< 0.28-5), libcrypt-openssl-x509-perl (<< 1.8.7-3), libcrypt-smime-perl (<< 0.19-2), libcrypt-ssleay-perl (<< 0.73.04-2), libnet-ssleay-perl (<< 1.78-2)
Description: version compatibility baseline for Perl OpenSSL packages
A subset of Perl XS module packages expose the OpenSSL binary interface
to Perl code. This can lead to incompatibilities if these packages are
linked against different versions of OpenSSL.
.
This package provides a virtual package "perl-openssl-abi-x" that
corresponds to the libssl-dev package SONAME it was built against.
The packages that need to stay compatible with each other can depend
on this.
.
Tools are also provided for generating this dependency with minimum
hassle. See the instructions in README.Debian.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: plymouth-theme-ubuntu-text
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: plymouth
Version: 0.9.3-1ubuntu7
Provides: plymouth-theme
Depends: libc6 (>= 2.2.5), libplymouth4 (>= 0.9.2), plymouth (= 0.9.3-1ubuntu7), lsb-release
Description: boot animation, logger and I/O multiplexer - ubuntu text theme
Plymouth provides a boot-time I/O multiplexing framework - the most obvious
use for which is to provide an attractive graphical animation in place of
the text messages that normally get shown during boot. (The messages are
instead redirected to a logfile for later viewing.) However, in event-driven
boot systems Plymouth can also usefully handle user interaction such as
password prompts for encrypted file systems.
.
This package contains the default ubuntu-text text theme used when no
support for a graphical theme is found on your system.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.02.176-4.1ubuntu3
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.141), liblvm2app2.2 (>= 2.02.176), libreadline5 (>= 5.2), libsystemd0 (>= 222), libudev1 (>= 183), lsb-base, dmsetup (>= 1.02.145-2~), dmeventd
Suggests: thin-provisioning-tools
Conffiles:
/etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
/etc/init.d/lvm2-lvmetad c67e25f2c711f99b9cdaca291a143986
/etc/init.d/lvm2-lvmpolld 6ee7740a641d91e302d3fbfe42a14942
/etc/lvm/lvm.conf 9317d30ee93e0f72fac8dbbe95287e31
/etc/lvm/lvmlocal.conf eeccf159eb1e1af87ca0c141235822b2
/etc/lvm/profile/cache-mq.profile 9df1883c03bac9d3041e75745cb5e0ec
/etc/lvm/profile/cache-smq.profile d27b7f0947c6ac21944c05e6098b9850
/etc/lvm/profile/command_profile_template.profile 3bab119bec857c31a53725da2d0a9408
/etc/lvm/profile/lvmdbusd.profile ffa904d375ce53ebb6befe7d65cf391a
/etc/lvm/profile/metadata_profile_template.profile bccbaf503cb8f0adb5b4f841f7c1f735
/etc/lvm/profile/thin-generic.profile f57ede2b5b249024766c51a223e15ed5
/etc/lvm/profile/thin-performance.profile f4de81439550553043e04f019a48a827
Description: Linux Logical Volume Manager
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: ubuntu-mono
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5647
Maintainer: Ubuntu Artwork Team <ubuntu-art@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-themes
Version: 16.10+18.04.20181005-0ubuntu1
Depends: adwaita-icon-theme, hicolor-icon-theme, humanity-icon-theme
Description: Ubuntu Mono Icon theme
Dark and Light panel icons to make your desktop beautiful.
Homepage: https://launchpad.net/ubuntu-themes
Package: gir1.2-freedesktop
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.56.1-1
Provides: gir1.2-cairo-1.0 (= 1.56.1-1), gir1.2-dbus-1.0 (= 1.56.1-1), gir1.2-dbusglib-1.0 (= 1.56.1-1), gir1.2-fontconfig-2.0 (= 1.56.1-1), gir1.2-freetype2-2.0 (= 1.56.1-1), gir1.2-gl-1.0 (= 1.56.1-1), gir1.2-libxml2-2.0 (= 1.56.1-1), gir1.2-xfixes-4.0 (= 1.56.1-1), gir1.2-xft-2.0 (= 1.56.1-1), gir1.2-xlib-2.0 (= 1.56.1-1), gir1.2-xrandr-1.3 (= 1.56.1-1)
Depends: gir1.2-glib-2.0 (= 1.56.1-1)
Description: Introspection data for some FreeDesktop components
GObject Introspection is a project for providing machine readable
introspection data of the API of C libraries. This introspection
data can be used in several different use cases, for example
automatic code generation for bindings, API verification and documentation
generation.
.
GObject Introspection contains tools to generate and handle the
introspection data.
.
This package contains small pieces of introspection data for the Cairo,
FontConfig, FreeType, GL, and some XOrg libraries. They are
distributed in this package temporarily, while the original sources
do not include support for GObject Introspection. They are far from
complete and only include what is necessary for other introspection
packages to work properly.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection
Package: libisc-export169
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 472
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libc6 (>= 2.25), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Description: Exported ISC Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libisc shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: libjson-c3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.12.1-1.3ubuntu0.3
Depends: libc6 (>= 2.14)
Description: JSON manipulation library - shared library
This library allows you to easily construct JSON objects in C,
output them as JSON formatted strings and parse JSON formatted
strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki
Original-Maintainer: fabien boucher <fabien.dot.boucher@gmail.com>
Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 330
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.29-1ubuntu4.27
Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Description: Apache HTTP Server (utility programs for web servers)
Provides some add-on programs useful for any web server. These include:
- ab (Apache benchmark tool)
- fcgistarter (Start a FastCGI program)
- logresolve (Resolve IP addresses to hostnames in logfiles)
- htpasswd (Manipulate basic authentication files)
- htdigest (Manipulate digest authentication files)
- htdbm (Manipulate basic authentication files in DBM format, using APR)
- htcacheclean (Clean up the disk cache)
- rotatelogs (Periodically stop writing to a logfile and open a new one)
- split-logfile (Split a single log including multiple vhosts)
- checkgid (Checks whether the caller can setgid to the specified group)
- check_forensic (Extract mod_log_forensic output from Apache log files)
- httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: http://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-20ubuntu0.18.04.6
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-20ubuntu0.18.04.6)
Description: PolicyKit Authentication Agent API
PolicyKit is a toolkit for defining and handling the policy that
allows unprivileged processes to speak to privileged processes.
.
This package contains a library for accessing the authentication agent.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: php5.6-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 6296
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-calendar, php-ctype, php-exif, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php5.6-calendar, php5.6-ctype, php5.6-exif, php5.6-fileinfo, php5.6-ftp, php5.6-gettext, php5.6-iconv, php5.6-pdo, php5.6-phar, php5.6-posix, php5.6-shmop, php5.6-sockets, php5.6-sysvmsg, php5.6-sysvsem, php5.6-sysvshm, php5.6-tokenizer
Depends: php-common (>= 1:73), ucf, libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libisns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 979
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: open-isns
Version: 0.97-2build1
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Recommends: netbase
Description: Internet Storage Name Service - shared libraries
Open-iSNS is an implementation of the Internet Storage Name Service
(iSNS), according to RFC 4171, which facilitates automated discovery,
management, and configuration of iSCSI and Fibre Channel devices on a
TCP/IP network.
.
This package provides the libisns shared library for use in client
applications.
Homepage: https://github.com/open-iscsi/open-isns
Original-Maintainer: Debian iSCSI Maintainers <pkg-iscsi-maintainers@lists.alioth.debian.org>
Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 641
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.58.0-2ubuntu3.24
Depends: libc6 (>= 2.17), libgnutls30 (>= 3.5.6), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libldap-2.4-2 (>= 2.4.7), libnettle6, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: node-nopt
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.6-3
Depends: node-abbrev, nodejs
Description: Command-line option parser for Node.js
Full featured option parser, with support for :
* types (String, path, url, Number, Date, Boolean, NaN, Stream, Array)
* error handling
* abbreviations
* shorthands
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/nopt
Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.89+dfsg-0.1
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Suggests: perl
Description: Utility to list open files
Lsof is a Unix-specific diagnostic tool. Its name stands
for LiSt Open Files, and it does just that. It lists
information about any files that are open, by processes
currently running on the system.
Original-Maintainer: Norbert Tretkowski <nobse@debian.org>
Homepage: http://people.freebsd.org/~abe/
Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.19.1-5build1
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.4), libunistring2 (>= 0.9.7)
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
Libpsl allows checking domains against the Public Suffix List.
It can be used to avoid privacy-leaking 'super-cookies',
'super domain' certificates, for domain highlighting purposes
sorting domain lists by site and more.
.
Please see https://publicsuffix.org for more detailed information.
.
This package contains runtime libraries.
Original-Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Homepage: https://github.com/rockdaboot/libpsl
Package: policykit-1
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.105-20ubuntu0.18.04.6
Depends: dbus, libpam-systemd, libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-20ubuntu0.18.04.6), libpolkit-backend-1-0 (= 0.105-20ubuntu0.18.04.6), libpolkit-gobject-1-0 (= 0.105-20ubuntu0.18.04.6)
Breaks: gdm3 (<< 3.8.4-7~)
Conffiles:
/etc/dbus-1/system.d/org.freedesktop.PolicyKit1.conf 09f96e58327bd8fe5cfdd28e56cef236
/etc/pam.d/polkit-1 7c794427f656539b0d4659b030904fe0
/etc/polkit-1/localauthority.conf.d/50-localauthority.conf 2adb9d174807b0a3521fabf03792fbc8
/etc/polkit-1/localauthority.conf.d/51-ubuntu-admin.conf c4dbd2117c52f367f1e8b8c229686b10
/etc/polkit-1/nullbackend.conf.d/50-nullbackend.conf 1619df1aeee5c92bf19446a820274e5a
Description: framework for managing administrative policies and privileges
PolicyKit is an application-level toolkit for defining and handling the policy
that allows unprivileged processes to speak to privileged processes.
.
It is a framework for centralizing the decision making process with respect to
granting access to privileged operations for unprivileged (desktop)
applications.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libdjvulibre-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 5848
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.27.1-8ubuntu0.4
Depends: libdjvulibre21 (= 3.5.27.1-8ubuntu0.4), libjpeg-dev
Description: Development files for the DjVu image format
DjVu image format static library and development files.
.
DjVu is a set of compression technologies, a file format, and a
software platform for the delivery over the Web of digital documents,
scanned documents, and high resolution images.
.
DjVu documents download and display extremely quickly, and look
exactly the same on all platforms. DjVu can be seen as a superior
alternative to PDF and Postscript for digital documents, to TIFF (and
PDF) for scanned documents, to JPEG for photographs and pictures, and
to GIF for large palettized images. DjVu is the only Web format that
is practical for distributing high-resolution scanned documents in
color.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <bap@debian.org>
Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
This package provides commands which can be used to display the system's
DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Michael Meskes <meskes@debian.org>
Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1361
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:2.8-1ubuntu1
Conffiles:
/etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
/etc/profile.d/bash_completion.sh 6caf94804f6065c3bb5099a70229efbd
Description: programmable completion for the bash shell
bash completion extends bash's standard completion behavior to achieve
complex command lines with just a few keystrokes. This project was
conceived to produce programmable completion routines for the most
common Linux/UNIX commands, reducing the amount of typing sysadmins
and programmers need to do on a daily basis.
Homepage: https://github.com/scop/bash-completion
Original-Maintainer: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
Package: grub-pc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 556
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02-2ubuntu8.25
Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub2 (<< 2.02-2ubuntu8.25)
Depends: debconf (>= 0.5) | debconf-2.0, grub-common (= 2.02-2ubuntu8.25), grub2-common (= 2.02-2ubuntu8.25), grub-pc-bin (= 2.02-2ubuntu8.25), ucf, grub-gfxpayload-lists
Conflicts: grub (<< 0.97-54), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-xen
Conffiles:
/etc/kernel/postrm.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c obsolete
/etc/kernel/postinst.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c obsolete
Description: GRand Unified Bootloader, version 2 (PC/BIOS version)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This package contains a version of GRUB that has been built for use with
traditional PC/BIOS architecture.
Homepage: http://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.11-2.1
Depends: libc6 (>= 2.14)
Description: Libraries for controlling NUMA policy
Library to control specific NUMA (Non-Uniform Memory Architecture)
scheduling or memory placement policies.
Original-Maintainer: Ian Wienand <ianw@debian.org>
Homepage: http://oss.sgi.com/projects/libnuma/
Package: multiarch-support
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1.5
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
This is a transitional package used to ensure multiarch support is present
in ld.so before unpacking libraries to the multiarch directories. It can
be removed once nothing on the system depends on it.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: tzdata
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3000
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2023c-0ubuntu0.18.04
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-buster
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
This package contains data required for the implementation of
standard local time for many representative locations around the
globe. It is updated periodically to reflect changes made by
political bodies to time zone boundaries, UTC offsets, and
daylight-saving rules.
Homepage: https://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Package: python3-zope.event
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: zope.event
Version: 4.2.0-1
Depends: python3-pkg-resources, python3:any (>= 3.3.2-2~)
Description: Very basic event publishing system
This package provides a simple event system. It provides an event publishing
system and a very simple event-dispatching system on which more sophisticated
event dispatching systems can be built. For example, a type-based event
dispatching system that builds on zope.event can be found in zope.component.
.
This is the Python 3 library.
Original-Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Homepage: http://pypi.python.org/pypi/zope.event
Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.51
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv
Description: metapackage ensuring an init system is installed
This package is a metapackage which allows you to select from the available
init systems while ensuring that one of these is available on the system at
all times.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Important: yes
Package: python3-constantly
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: constantly
Version: 15.1.0-1
Depends: python3:any (>= 3.3.2-2~)
Description: Symbolic constants in Python
A library that provides symbolic constant support. It includes
collections and constants with text, numeric, and bit flag
values.
.
Originally twisted.python.constants from the Twisted project.
.
This package provides the Python 3.x module.
Original-Maintainer: Free Ekanayaka <freee@debian.org>
Homepage: https://github.com/twisted/constantly
Package: grub-legacy-ec2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:1
Depends: debconf (>= 1.5.19) | cdebconf, ucf, debconf (>= 0.5) | debconf-2.0
Suggests: grub-legacy-doc
Conflicts: grub
Conffiles:
/etc/kernel/postinst.d/x-grub-legacy-ec2 48dc1f918172fc12627b12e2dbc6ce31
/etc/kernel/postrm.d/x-grub-legacy-ec2 e3e7d01340b454f90aaebfb48e478078
Description: Handles update-grub for ec2 instances
EC2 instances that use grub-legacy as a bootloader need a way to keep
/boot/grub/menu.lst up to date while not conflicting with grub-pc.
This package provides that.
Package: linux-image-5.4.0-1063-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10303
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1063.66~18.04.1
Config-Version: 5.4.0-1063.66~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1063-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1063-aws
Conflicts: linux-image-unsigned-5.4.0-1063-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1063.66~18.04.1)
Package: libklibc
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: klibc
Version: 2.0.4-9ubuntu2.1
Description: minimal libc subset for use with initramfs
klibc is intended to be a minimalistic libc subset for use with
initramfs. It is deliberately written for small size, minimal
entanglement, and portability, not speed. It is definitely a work in
progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: maximilian attems <maks@debian.org>
Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 237-3ubuntu10.57
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Recommends: libnss-systemd
Conflicts: file-rc, openrc (<< 0.20.4-2.1), systemd-shim, sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
This package provides the manual pages and links needed for systemd
to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: libipc-system-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.25-4
Depends: perl
Description: Perl module to run commands simply, with detailed diagnostics
IPC::System::Simple takes the hard work out of calling external commands; it
provides replacements for system() and the backtick operator that will either
succeed, or die with rich diagnostic messages on errors.
.
The module also includes the ability to specify acceptable exit values, trap
errors, or process diagnostics.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IPC-System-Simple
Package: libasn1-8-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 783
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libc6 (>= 2.14), libcom-err2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - ASN.1 library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the ASN.1 parser required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: mawk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17ubuntu3
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
Mawk is an interpreter for the AWK Programming Language. The AWK
language is useful for manipulation of data files, text retrieval and
processing, and for prototyping and experimenting with algorithms. Mawk
is a new awk meaning it implements the AWK language as defined in Aho,
Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
to the POSIX 1003.2 (draft 11.3) definition of the AWK language
which contains a few features not described in the AWK book, and mawk
provides a small number of extensions.
.
Mawk is smaller and much faster than gawk. It has some compile-time
limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: cryptsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:2.0.2-1ubuntu1.1
Replaces: cryptsetup-luks, hashalot (<< 0.3-2)
Provides: cryptsetup-luks
Depends: cryptsetup-bin (>= 2:1.6.0), dmsetup, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.15)
Recommends: busybox-static | busybox, console-setup, initramfs-tools (>= 0.129) | linux-initramfs-tool, kbd, plymouth
Suggests: dosfstools, keyutils, liblocale-gettext-perl
Breaks: hashalot (<< 0.3-2)
Conflicts: cryptsetup-luks
Conffiles:
/etc/cryptsetup-initramfs/conf-hook 7c1314c3f6ebb652e75fd5787206c47f
/etc/default/cryptdisks 756141f7eacf1a272a2f6e51646b3aa4
/etc/init.d/cryptdisks 20b58baefc1aed5021a28e2fb9439edd
/etc/init.d/cryptdisks-early e1cf19de7f8aae9e52a6aa7c244fe65d
Description: disk encryption support - startup scripts
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
Cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package includes support for
automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. Additional features are cryptoroot support through
initramfs-tools and several supported ways to read a passphrase or key.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Package: open-vm-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2093
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:11.0.5-4ubuntu0.18.04.2
Replaces: open-vm-tools-desktop (<< 2:10.0.7-3227872-2~)
Depends: libc6 (>= 2.16), libdrm2 (>= 2.4.3), libfuse2 (>= 2.6), libgcc1 (>= 1:3.3), libglib2.0-0 (>= 2.31.8), libmspack0 (>= 0.4), libssl1.1 (>= 1.1.0), libudev1 (>= 183), libxml2 (>= 2.7.4), libxmlsec1 (>= 1.2.25), libxmlsec1-openssl (>= 1.2.25), pciutils, iproute2, lsb-release
Recommends: ethtool, zerofree, fuse
Suggests: open-vm-tools-desktop, cloud-init
Breaks: open-vm-tools-desktop (<< 2:10.3.5-2~)
Conffiles:
/etc/init.d/open-vm-tools aeead08272288e4dfbaaf30d0c250726
/etc/pam.d/vmtoolsd c8d3eb12e396c1824018eea75e5f9d56
/etc/vmware-tools/poweroff-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/poweron-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/resume-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/scripts/vmware/network 7c883dc469e547173590875efbce5c89
/etc/vmware-tools/statechange.subr 9ebfc4a9aa22fe49491ad4ac47d4d22c
/etc/vmware-tools/suspend-vm-default 370468e5f19a306e29d39fbf7b72cf08
/etc/vmware-tools/tools.conf 76d7075ddb1a4266cb7e43f3a50181b7
/etc/vmware-tools/tools.conf.example d49268c5e6f8fbedf8ee70fcb2063591
/etc/vmware-tools/vgauth.conf f69cdba593a31a44773ccb174ba7d90c
/etc/vmware-tools/vgauth/schemas/XMLSchema-hasFacetAndProperty.xsd 9308e8b04cbf7d2748a287ace40878ea
/etc/vmware-tools/vgauth/schemas/XMLSchema-instance.xsd e1059f0307358c02766193e5e24c107b
/etc/vmware-tools/vgauth/schemas/XMLSchema.dtd 86eafc21ca4ab293b7515e453c2b5dfe
/etc/vmware-tools/vgauth/schemas/XMLSchema.xsd 54f86ef1a7a41930ba250151f143069b
/etc/vmware-tools/vgauth/schemas/catalog.xml de4f8846e6e571af9feddd834b33a9be
/etc/vmware-tools/vgauth/schemas/datatypes.dtd c61228050bb7c1c28a7f659f86a6e6c9
/etc/vmware-tools/vgauth/schemas/saml-schema-assertion-2.0.xsd 612084dbce32687eef288f56569de391
/etc/vmware-tools/vgauth/schemas/xenc-schema.xsd 4e7be0e2cae08227fd9ddb261c1e4e93
/etc/vmware-tools/vgauth/schemas/xml.xsd d4314590e7e7aaf6bcd508be0fd1c614
/etc/vmware-tools/vgauth/schemas/xmldsig-core-schema.xsd dff329f34df298d952d2e800a097c431
/etc/vmware-tools/vm-support d938342b0c8bb5ec4494e773829a42eb
/etc/vmware-tools/guestproxy-ssl.conf e0c751111a3a72264eb2923b99bf868c obsolete
Description: Open VMware Tools for virtual machines hosted on VMware (CLI)
The Open Virtual Machine Tools (open-vm-tools) project is an open source
implementation of VMware Tools. It is a suite of virtualization utilities and
drivers to improve the functionality, user experience and administration of
VMware virtual machines.
.
This package contains only the core user-space programs and libraries.
Homepage: https://github.com/vmware/open-vm-tools
Original-Maintainer: Bernd Zeimetz <bzed@debian.org>
Package: php-json-schema
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 194
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.2.6-1
Depends: php-cli, php-common
Description: implementation of JSON schema
JSON Schema defines the media type "application/schema+json", a JSON
based format for defining the structure of JSON data. JSON Schema
provides a contract for what JSON data is required for a given
application and how to interact with it. JSON Schema is intended to
define validation, documentation, hyperlink navigation, and interaction
control of JSON data.
.
This package provides a PHP library for validating JSON Structures
against a given Schema.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/justinrainbow/json-schema
Package: libfile-basedir-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.07-1
Depends: perl, libipc-system-simple-perl
Description: Perl module to use the freedesktop basedir specification
The File::BaseDir module can be used to find directories and files as
specified by the XDG Base Directory Specification. It takes care of
defaults and uses File::Spec to make the output platform specific.
.
For this module the XDG basedir specification 0.6 was used.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-BaseDir
Package: node-yallist
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 22
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.0.0-1
Depends: nodejs
Description: Yet Another Linked List
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/yallist#readme
Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 231
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6-5ubuntu1.2
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
This package provides the standard GNU file compression utilities, which
are also the default compression tools for Debian. They typically operate
on files with names ending in '.gz', but can also decompress files ending
in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>
Package: libelf1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.170-0.4ubuntu0.1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
The libelf1 package provides a shared library which allows reading and
writing ELF files on a high level. Third party programs depend on
this package to read internals of ELF files. The programs of the
elfutils package use it also to generate new ELF files.
.
This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>
Package: python3-zope.component
Status: install ok installed
Priority: extra
Section: zope
Installed-Size: 334
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: all
Source: zope.component
Version: 4.3.0-1+ubuntu18.04.1+certbot+3
Depends: python3-zope.hookable, python3-zope.interface (>= 4.1.0), python3-pkg-resources, python3-zope.event, python3:any (>= 3.3.2-2~)
Description: Zope Component Architecture
The core of the Zope Component Architecture. Together with the zope.interface
package, it provides facilities for defining, registering and looking up
components.
.
This is the Python 3 version.
Homepage: http://pypi.python.org/pypi/zope.component
Package: libubsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 337
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.4), libgcc1, libstdc++6
Description: UBSan -- undefined behaviour sanitizer (runtime)
UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
Various computations will be instrumented to detect undefined behavior
at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libirs160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4), libdns1100 (>= 1:9.11.3+dfsg), libisccfg160 (>= 1:9.10.6+dfsg)
Description: DNS Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libirs shared library used by BIND's daemons and
clients.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: libatspi2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.28.0-1
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.37.3), libx11-6
Recommends: at-spi2-core (= 2.28.0-1)
Description: Assistive Technology Service Provider Interface - shared library
This package contains the shared library for applications that wish to use
the at-spi interface.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Accessibility
Package: linux-modules-5.4.0-1037-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65693
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1037.39~18.04.1
Config-Version: 5.4.0-1037.39~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-slide
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1.6-1
Depends: nodejs
Description: Simple chain and asyncMap flow control module for Node.js
The flow control module used by npm, for chaining functions with a
clean and concise style, without the need for lots of inlined callbacks
functions. Results are optionally filled in an array given as argument.
.
node-slide also provides an asyncMap function.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/slide-flow-control
Package: python3-requests-unixsocket
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-requests-unixsocket
Version: 0.1.5-3
Depends: python3-requests, python3-urllib3, python3:any (>= 3.3.2-2~)
Description: Use requests to talk HTTP via a UNIX domain socket - Python 3.x
The requests-unixsocket makes it possible to talk using the HTTP protocol via
a UNIX domain socket. Internally, requests-unixsocket uses monkeypatching to
use the functionality of requests while making minimal changes.
.
Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
multipart files, and parameters with simple Python dictionaries, and access
the response data in the same way. It's powered by httplib and urllib3, but
it does all the hard work and crazy hacks for you.
.
This package contains the Python 3.x module.
Original-Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Homepage: https://github.com/msabramo/requests-unixsocket
Package: libtsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1023
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.23), libgcc1 (>= 1:3.3)
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-image-5.4.0-1103-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 10324
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1103.111~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1103-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1103-aws
Conflicts: linux-image-unsigned-5.4.0-1103-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1103.111~18.04.1)
Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.0.1), libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), libreadline7 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
GnuPG is GNU's tool for secure communication and data storage.
.
This package contains core utilities used by different tools in the
suite offered by GnuPG. It can be used to programmatically edit
config files for tools in the GnuPG suite, to launch or terminate
per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: run-one
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 44
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 1.17-0ubuntu1
Replaces: bikeshed (<< 1.8)
Depends: procps
Breaks: bikeshed (<< 1.8)
Enhances: anacron, cron
Description: run just one instance of a command and its args at a time
This utility will run just one instance at a time of some command and
unique set of arguments (useful for cronjobs, eg).
Homepage: http://launchpad.net/run-one
Package: linux-image-5.4.0-1097-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 10324
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1097.105~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1097-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1097-aws
Conflicts: linux-image-unsigned-5.4.0-1097-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1097.105~18.04.1)
Package: btrfs-tools
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: btrfs-progs
Version: 4.15.1-1build1
Depends: btrfs-progs
Description: transitional dummy package
This is a transitional dummy package. It can safely be removed.
Homepage: http://btrfs.wiki.kernel.org/
Original-Maintainer: Dimitri John Ledkov <xnox@debian.org>
Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3298
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.3-10
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.0), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
/etc/groff/man.local e6591616404c7c443f71ff21d27430d7
/etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
This package contains the traditional UN*X text formatting tools
troff, nroff, tbl, eqn, and pic. These utilities, together with the
man-db package, are essential for displaying the on-line manual pages.
.
groff-base is a stripped-down package containing the necessary components
to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
device (groff's default). Users who want a full groff installation, with
the standard set of devices, fonts, macros, and documentation, should
install the groff package.
Homepage: https://www.gnu.org/software/groff/
Package: linux-modules-4.15.0-1060-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 60703
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1060.62
Config-Version: 4.15.0-1060.62
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-which
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.0-1
Depends: nodejs, node-isexe
Description: Cross-platform 'which' module for Node.js
node-which finds the first instance of a specified executable
in the PATH environment variable, simulating the behaviour of
the standard "which" program.
node-which supports all platforms supported by Node.js.
.
This is the module only, the binary being totally useless.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/node-which
Package: texlive-pictures
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 20238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-base
Version: 2017.20180305-1
Replaces: prerex (<= 6.5.3-1), texlive-luatex (<< 2017.20171022)
Depends: tex-common (>= 6), python, texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437), texlive-latex-recommended (>= 2017.20170628)
Recommends: ruby | ruby-interpreter, tk
Suggests: dot2tex, prerex (>> 6.5.3-1), ruby-tcltk | libtcltk-ruby, texlive-latex-extra, texlive-pictures-doc, vprerex (>> 6.5.3-1)
Breaks: prerex (<= 6.5.3-1), texlive-base (<< 2017.20170628), texlive-luatex (<< 2017.20171022)
Description: TeX Live: Graphics, pictures, diagrams
Including TikZ, pict, etc., but MetaPost and PStricks are separate.
.
This package includes the following CTAN packages:
.
adigraph -- Augmenting directed graphs
.
aobs-tikz -- TikZ styles for creating overlaid pictures in beamer
.
askmaps -- Typeset American style Karnaugh maps
.
asyfig -- Commands for using Asymptote figures
.
asypictureb -- User-friendly integration of Asymptote into LaTeX
.
autoarea -- Automatic computation of bounding boxes with PiCTeX
.
bardiag -- LaTeX package for drawing bar diagrams
.
beamerswitch -- Convenient mode selection in Beamer documents
.
binarytree -- Drawing binary trees using TikZ
.
blochsphere -- Draw pseudo-3D diagrams of Bloch spheres
.
bloques -- Generate control diagrams
.
blox -- Draw block diagrams, using TikZ
.
bodegraph -- Draw Bode, Nyquist and Black plots with gnuplot and TikZ
.
bondgraph -- Create bond graph figures in LaTeX documents
.
bondgraphs -- Draws bond graphs in LaTeX, using PGF/TikZ
.
braids -- Draw braid diagrams with PGF/TikZ
.
bxeepic -- Eepic facilities using pict2e
.
cachepic -- Convert document fragments into graphics
.
callouts -- Put simple annotations and notes inside a picture
.
celtic -- A TikZ library for drawing celtic knots
.
chemfig -- Draw molecules with easy syntax
.
combinedgraphics -- Include graphic (EPS or PDF)/LaTeX combinations
.
circuitikz -- Draw electrical networks with TikZ
.
curve -- A class for making curriculum vitae
.
curve2e -- Extensions for package pict2e
.
curves -- Curves for LaTeX picture environment
.
dcpic -- Commutative diagrams in a LaTeX and TeX documents
.
diagmac2 -- Diagram macros, using pict2e
.
doc-pictex -- A summary list of PicTeX documentation
.
dottex -- Use dot code in LaTeX
.
dot2texi -- Create graphs within LaTeX using the dot2tex tool
.
dratex -- General drawing macros
.
drs -- Typeset Discourse Representation Structures (DRS)
.
duotenzor -- Drawing package for circuit and duotensor diagrams
.
dynkin-diagrams -- Draw Dynkin, Coxeter, and Satake diagrams using TikZ
.
ecgdraw -- draws electrocardiograms (ECG)
.
eepic -- Extensions to epic and the LaTeX drawing tools
.
ellipse -- Draw ellipses and elliptical arcs using the standard LaTeX2e
picture environment
.
endofproofwd -- An "end of proof" sign
.
epspdf -- Converter for PostScript, EPS and PDF
.
epspdfconversion -- On-the-fly conversion of EPS to PDF
.
esk -- Package to encapsulate Sketch files in LaTeX sources
.
fast-diagram -- Easy generation of FAST diagrams
.
fig4latex -- Management of figures for large LaTeX documents
.
fitbox -- Fit graphics on a page
.
flowchart -- Shapes for drawing flowcharts, using TikZ
.
forest -- Drawing (linguistic) trees
.
genealogytree -- Pedigree and genealogical tree diagrams
.
getmap -- Download OpenStreetMap maps for use in documents
.
gincltex -- Include TeX files as graphics (.tex support for
\includegraphics)
.
gnuplottex -- Embed Gnuplot commands in LaTeX documents
.
gradientframe -- Simple gradient frames around objects
.
grafcet -- Draw Grafcet/SFC with TikZ
.
graphicxpsd -- Adobe Photoshop Data format (PSD) support for graphicx
package
.
graphviz -- Write graphviz (dot+neato) inline in LaTeX documents
.
gtrlib-largetrees -- Library for genealogytree package aiming at large trees
.
harveyballs -- Create Harvey Balls using TikZ
.
here -- Emulation of obsolete package for "here" floats
.
hf-tikz -- A simple way to highlight formulas and formula parts
.
hobby -- An implementation of Hobby's algorithm for PGF/TikZ
.
hvfloat -- Rotating caption and object of floats independently
.
istgame -- Drawing Game Trees with TikZ
.
knitting -- Produce knitting charts, in Plain TeX or LaTeX
.
knittingpattern -- Create knitting patterns
.
ladder -- Draw simple ladder diagrams using TikZ
.
lapdf -- PDF drawing directly in TeX documents
.
latex-make -- Easy compiling of complex (and simple) LaTeX documents
.
lpic -- Put LaTeX material over included graphics
.
lroundrect -- LaTeX macros for utilizing the roundrect MetaPost routines
.
luamesh -- Computes and draws 2D Delaunay triangulation
.
luasseq -- Drawing spectral sequences in LuaLaTeX
.
maker -- Include Arduino or Processing code in LaTeX documents
.
makeshape -- Declare new PGF shapes
.
mathspic -- A Perl filter program for use with PiCTeX
.
miniplot -- A package for easy figure arrangement
.
mkpic -- Perl interface to mfpic
.
modiagram -- Drawing molecular orbital diagrams
.
neuralnetwork -- Graph-drawing for neural networks
.
numericplots -- Plot numeric data (including Matlab export) using PSTricks
.
pb-diagram -- A commutative diagram package using LAMSTeX or Xy-pic fonts
.
petri-nets -- A set TeX/LaTeX packages for drawing Petri nets
.
pgf -- Create PostScript and PDF graphics in TeX
.
pgf-blur -- PGF/TikZ package for "blurred" shadows
.
pgf-soroban -- Create images of the soroban using TikZ/PGF
.
pgf-spectra -- Draw continuous or discrete spectra using PGF/TikZ
.
pgf-umlcd -- Some LaTeX macros for UML Class Diagrams
.
pgf-umlsd -- Draw UML Sequence Diagrams
.
pgfgantt -- Draw Gantt charts with TikZ
.
pgfkeyx -- Extended and more robust version of pgfkeys
.
pgfmolbio -- Draw graphs typically found in molecular biology texts
.
pgfopts -- LaTeX package options with pgfkeys
.
pgfornament -- Drawing of Vectorian ornaments with PGF/TikZ
.
pgfplots -- Create normal/logarithmic plots in two and three dimensions
.
picinpar -- Insert pictures into paragraphs
.
pict2e -- New implementation of picture commands
.
pictex -- Picture drawing macros for TeX and LaTeX
.
pictex2 -- Adds relative coordinates and improves the \plot command
.
pinlabel -- A TeX labelling package
.
pixelart -- A package to draw pixel-art pictures
.
pmgraph -- "Poor man's" graphics
.
prerex -- Interactive editor and macro support for prerequisite charts
.
productbox -- Typeset a three-dimensional product box
.
pxpgfmark -- e-pTeX driver for PGF inter-picture connections
.
qcircuit -- Macros to generate quantum ciruits
.
qrcode -- Generate QR codes in LaTeX
.
randbild -- Marginal pictures
.
randomwalk -- Random walks using TikZ
.
reotex -- Draw Reo Channels and Circuits
.
rviewport -- Relative Viewport for Graphics Inclusion
.
sa-tikz -- TikZ library to draw switching architectures
.
schemabloc -- Draw block diagrams, using TikZ
.
scsnowman -- Snowman variants using TikZ
.
scratch -- Draw programs like "scratch"
.
setdeck -- Typeset cards for Set
.
signchart -- Create beautifully typeset sign charts
.
smartdiagram -- Generate diagrams from lists
.
spath3 -- Manipulate "soft paths" in PGF
.
spectralsequences -- Print spectral sequence diagrams using PGF/TikZ
.
swimgraf -- Graphical/textual representations of swimming performances
.
table-fct -- Draw a variations table of functions and a convexity table of
its graph.
.
texdraw -- Graphical macros, using embedded PostScript
.
ticollege -- Graphical representation of keys on a standard scientific
calculator
.
tipfr -- Produces calculator's keys with the help of TikZ
.
tikz-3dplot -- Coordinate transformation styles for 3d plotting in TikZ
.
tikz-bayesnet -- Draw Bayesian networks, graphical models and directed
factor graphs
.
tikz-cd -- Create commutative diagrams with TikZ
.
tikz-dependency -- A library for drawing dependency graphs
.
tikz-dimline -- Technical dimension lines using PGF/TikZ
.
tikz-feynhand -- Feynman diagrams with TikZ
.
tikz-feynman -- Feynman diagrams with TikZ
.
tikz-inet -- Draw interaction nets with TikZ
.
tikz-kalender -- A LaTeX based calendar using TikZ
.
tikz-karnaugh -- Typeset Karnaugh maps using TikZ
.
tikz-ladder -- Draw ladder diagrams using TikZ
.
tikz-layers -- TikZ provides graphical layers on TikZ: "behind", "above" and
"glass"
.
tikz-opm -- Typeset OPM diagrams
.
tikz-optics -- A library for drawing optical setups with TikZ
.
tikz-page -- Small macro to help building nice and complex layout materials
.
tikz-palattice -- Draw particle accelerator lattices with TikZ
.
tikz-qtree -- Use existing qtree syntax for trees in TikZ
.
tikz-relay -- TikZ library for typesetting electrical diagrams
.
tikz-sfc --
.
tikz-timing -- Easy generation of timing diagrams as TikZ pictures
.
tikzcodeblocks -- Helps to draw codeblocks like scratch, NEPO and PXT in
TikZ
.
tikzducks -- A little fun package for using rubber ducks in TikZ
.
tikzinclude -- Import TikZ images from colletions
.
tikzmark -- Use TikZ's method of remembering a position on a page
.
tikzorbital -- Atomic and molecular orbitals using TikZ
.
tikzpagenodes -- A single TikZ node for the whole page
.
tikzpfeile -- Draw arrows using PGF/TikZ
.
tikzpeople -- Draw people-shaped nodes in TikZ
.
tikzposter -- Create scientific posters using TikZ
.
tikzscale -- Resize pictures while respecting text size
.
tikzsymbols -- Some symbols created using TikZ
.
timing-diagrams -- Draw timing diagrams
.
tqft -- Drawing TQFT diagrams with TikZ/PGF
.
tkz-base -- Tools for drawing with a cartesian coordinate system
.
tkz-berge -- Macros for drawing graphs of graph theory
.
tkz-doc -- Documentation macros for the TKZ series of packages
.
tkz-euclide -- Tools for drawing Euclidean geometry
.
tkz-fct -- Tools for drawing graphs of functions
.
tkz-graph -- Draw graph-theory graphs
.
tkz-kiviat -- Draw Kiviat graphs
.
tkz-linknodes -- Link nodes in mathematical environments
.
tkz-orm -- Create Object-Role Model (ORM) diagrams
.
tkz-tab -- Tables of signs and variations using PGF/TikZ
.
tsemlines -- Support for the ancient \emline macro
.
tufte-latex -- Document classes inspired by the work of Edward Tufte
.
venndiagram -- Creating Venn diagrams with TikZ
.
visualpstricks -- Visual help for PSTricks based on images with minimum text
.
xpicture -- Extensions of LaTeX picture drawing
.
xypic -- Flexible diagramming macros
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: linux-image-5.4.0-1039-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9216
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1039.41~18.04.1
Config-Version: 5.4.0-1039.41~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1039-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1039-aws
Conflicts: linux-image-unsigned-5.4.0-1039-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-lru-cache
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.1.1-1
Depends: node-yallist, node-pseudomap, nodejs
Description: least-recently-used cache object for Node.js
A cache object that deletes the least-recently-used items.
This is the Node.js module.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/node-lru-cache
Package: language-selector-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1656
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: language-selector
Version: 0.188.1
Depends: python3:any (>= 3.3.2-2~), iso-codes, python3-apt (>= 0.7.12.0), python3-dbus, dbus, accountsservice (>= 0.6.29-1ubuntu6)
Pre-Depends: dpkg (>= 1.15.7.2)
Conffiles:
/etc/dbus-1/system.d/com.ubuntu.LanguageSelector.conf 7fa4258d2c6b90e20fe299c6eca727ff
/etc/fonts/conf.avail/30-cjk-aliases.conf a8c1e3ddb3c01a1974cd6ba8510277ca
/etc/fonts/conf.avail/64-language-selector-prefer.conf 4aef38bf760f429fe9edb4708c57f4fa
/etc/fonts/conf.avail/69-language-selector-ja.conf 77a350120d9912db62dc476a105ad150
/etc/fonts/conf.avail/69-language-selector-zh-cn.conf 213c5fccbf5f3ee348f993f085c8d99e
/etc/fonts/conf.avail/69-language-selector-zh-hk.conf c410ed2ab053091b7c2bf2fde0979246
/etc/fonts/conf.avail/69-language-selector-zh-mo.conf ae322c10c54d609bc37bed17c11cd32b
/etc/fonts/conf.avail/69-language-selector-zh-sg.conf eb0cdda5f96e73c75446af7f8676d494
/etc/fonts/conf.avail/69-language-selector-zh-tw.conf a981e8a61314aeb753c11d6c72d80cd9
/etc/fonts/conf.avail/99-language-selector-zh.conf bcbe0b7ba747248475e9413184103a2c
/etc/profile.d/cedilla-portuguese.sh eb7a23efe066237e69ad812ad771873c
Description: Language selector for Ubuntu
This package let you change and install language packs
in Ubuntu.
.
This package contains the common part of language-selector
Package: libglib2.0-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3675
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.56.4-0ubuntu0.18.04.9
Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libmount1 (>= 2.19.1), libpcre3, libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Description: GLib library of C routines
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package contains the shared libraries.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.0.4)
Version: 5.8+1.0.4
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
/etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
/etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
/etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
.
This package includes files needed by all versions of the client library,
e.g. /etc/mysql/my.cnf.
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Package: node-fstream-ignore
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.6-2
Depends: nodejs, node-minimatch (>= 0.2.0), node-fstream (>= 0.1.17), node-inherits
Description: Directory reader configurable by .ignore module for Node.js
node-fstream-ignore filters out files that match globs in `.ignore`
files throughout the tree, like how git ignores files based on a
`.gitignore` file.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/fstream-ignore
Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 476
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
.
gpgv is actually a stripped-down version of gpg which is only able
to check signatures. It is somewhat smaller than the fully-blown gpg
and uses a different (and simpler) way to check that the public keys
used to make the signature are valid. There are no configuration
files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: node-github-url-from-git
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.4.0-1
Depends: nodejs
Description: Convert github git or gist url to an http url - Node.js module
This module is a simple regular expression for parsing and converting
a git repository url from github to an http url. It supports gists as
well. It is used by npm and node-normalize-package-data.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/visionmedia/node-github-url-from-git
Package: xorg-sgml-doctools
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:1.11-1
Description: Common tools for building X.Org SGML documentation
This package contains tools for building the X.Org SGML documentation.
Currently it only includes various entity definitions for the current
release.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-image-5.4.0-1083-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10303
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1083.90~18.04.1
Config-Version: 5.4.0-1083.90~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1083-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1083-aws
Conflicts: linux-image-unsigned-5.4.0-1083-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1083.90~18.04.1)
Package: php5.6
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 283
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php
Depends: libapache2-mod-php5.6 | php5.6-fpm | php5.6-cgi, php5.6-common
Description: server-side, HTML-embedded scripting language (metapackage)
This package is a metapackage that, when installed, guarantees that you
have at least one of the four server-side versions of the PHP interpreter
installed. Removing this package won't remove PHP from your system, however
it may remove other packages that depend on this one.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1:2.25-1.2
Depends: libc6 (>= 2.14)
Description: POSIX 1003.1e capabilities (library)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains the shared library.
Original-Maintainer: Christian Kastner <ckk@debian.org>
Homepage: http://sites.google.com/site/fullycapable/
Package: python3-click
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 259
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-click
Version: 6.7-3
Depends: python3:any (>= 3.3.2-2~), python3-colorama
Description: Simple wrapper around optparse for powerful command line utilities - Python 3.x
Click is a Python package for creating beautiful command line interfaces
in a composable way with as little code as necessary. It's the "Command
Line Interface Creation Kit". It's highly configurable but comes with
sensible defaults out of the box.
.
It aims to make the process of writing command line tools quick and fun
while also preventing any frustration caused by the inability to implement
an intended CLI API.
.
This is the Python 3 compatible package.
Original-Maintainer: Alexandre Viau <aviau@debian.org>
Homepage: https://salsa.debian.org/debian/python-click.git
Package: python3-botocore
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 26312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-botocore
Version: 1.8.48+repack-1
Depends: python3-dateutil, python3-docutils, python3-jmespath, python3:any (>= 3.3.2-2~), python3-requests
Description: Low-level, data-driven core of boto 3 (Python 3)
A low-level interface to a growing number of Amazon Web Services.
The botocore package is the foundation for AWS-CLI.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/boto/botocore
Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-idna
Version: 2.6-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
A library to support the Internationalised Domain Names in Applications (IDNA)
protocol as specified in RFC 5891. This version of the protocol is often
referred to as “IDNA2008” and can produce different results from the earlier
standard from 2003.
.
The library is also intended to act as a suitable drop-in replacement for the
“encodings.idna” module that comes with the Python standard library but
currently only supports the older 2003 specification.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/kjd/idna
Package: libexporter-tiny-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.000000-2
Depends: perl
Description: tiny exporter similar to Sub::Exporter
Exporter::Tiny is an exporter for Perl with the features of
Sub::Exporter but only core dependencies.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Exporter-Tiny
Package: libgdk-pixbuf2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 523
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.36.11-2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.48.0), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libx11-6, shared-mime-info, libgdk-pixbuf2.0-common (= 2.36.11-2)
Recommends: libgdk-pixbuf2.0-bin
Description: GDK Pixbuf library
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.gtk.org/
Package: linux-aws-5.4-headers-5.4.0-1096
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71144
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1096.104~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1096/debian.README.gz for details
Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.31.1-0.4ubuntu3.7)
Version: 1:2.31.1-0.4ubuntu3.7
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.14), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
This package contains the bare minimum of BSD utilities needed for a
Debian system: logger, renice, script, scriptreplay, and wall. The
remaining standard BSD utilities are provided by bsdmainutils.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.20-1ubuntu1
Depends: libc6 (>= 2.14), libnewt0.52, libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
Whiptail is a "dialog" replacement using newt instead of ncurses. It
provides a method of displaying several different types of dialog boxes
from shell scripts. This allows a developer of a script to interact with
the user in a much friendlier manner.
Homepage: https://fedorahosted.org/newt/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-json-pointer
Version: 1.10-1
Depends: python3:any (>= 3.3.2-2~)
Description: resolve JSON pointers - Python 3.x
Python-json-pointer is a small library to resolve JSON pointers according to
the IETF draft specification. JSON Pointer defines a string syntax for
identifying a specific value within a JavaScript Object Notation (JSON)
document.
.
This package provides the module for Python 3.x.
Original-Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Homepage: https://github.com/stefankoegl/python-json-pointer
Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.16.0-1ubuntu1.1~18.04.4
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.14), libffi6 (>= 3.0.4)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - client library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships the library that implements the client side of
the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 214
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.5.8-2.10
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
from ash.
.
Since it executes scripts faster than bash, and has fewer library
dependencies (making it more robust against software or hardware
failures), it is used as the default system shell on Debian systems.
Original-Maintainer: Gerrit Pape <pape@smarden.org>
Homepage: http://gondor.apana.org.au/~herbert/dash/
Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse
Version: 2.9.7-1ubuntu1
Depends: libc6 (>= 2.17)
Suggests: fuse
Conflicts: fuse (<< 2.9.7-1ubuntu1)
Description: Filesystem in Userspace (library)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
.
This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: python3-update-manager
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:18.04.11.4
Replaces: update-manager-core (<< 1:0.163)
Depends: python3:any (>= 3.3.2-2~), python3-apt (>= 0.8.5~), python3-distupgrade, lsb-release
Suggests: python3-launchpadlib
Breaks: python3-distupgrade (<< 1:16.10.10), update-manager-core (<< 1:0.163)
Description: python 3.x module for update-manager
Python module for update-manager (UpdateManager).
.
This package contains the python 3.x version of this module.
Package: linux-modules-5.4.0-1048-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69420
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1048.50~18.04.1
Config-Version: 5.4.0-1048.50~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.15.10-2ubuntu0.1
Depends: libcairo2 (>= 1.10.0), libglib2.0-0 (>= 2.14.0)
Description: Cairo 2D vector graphics library (GObject library)
Cairo is a multi-platform library providing anti-aliased
vector-based rendering for multiple target backends.
.
This package contains the GObject library, providing wrapper GObject types
for all cairo types.
Homepage: https://cairographics.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: xkb-data
Status: install ok installed
Priority: important
Section: x11
Installed-Size: 3186
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.23.1-1ubuntu1
Breaks: libx11-6 (<< 2:1.4.3)
Description: X Keyboard Extension (XKB) configuration data
This package contains configuration data used by the X Keyboard
Extension (XKB), which allows selection of keyboard layouts when
using a graphical interface.
.
Every X11 vendor provides its own XKB data files, so keyboard layout
designers have to send their layouts to several places. The
xkeyboard-config project has been launched at FreeDesktop in order
to provide a central repository that could be used by all vendors.
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.4
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
This is the Cyrus SASL API implementation, version 2.1. See package
libsasl2-2 and RFC 2222 for more information.
.
This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Package: linux-aws-5.4-headers-5.4.0-1100
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71142
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1100.108~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1100/debian.README.gz for details
Package: libcurl4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 645
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.58.0-2ubuntu3.24
Replaces: libcurl3
Depends: libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: libbind9-160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libdns1100 (= 1:9.11.3+dfsg-1ubuntu1.18), libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libisccfg160 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4)
Description: BIND9 Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libbind9 shared library used by BIND's daemons and
clients.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1054-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69470
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1054.57~18.04.1
Config-Version: 5.4.0-1054.57~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libxcb-shm0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libxcb-shm0 (= 1.13-2~ubuntu18.04), libxcb1-dev
Description: X C Binding, shm extension, development files
This package contains the header and library files needed to build software
using libxcb-shm, the shm extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: libaugeas0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: augeas
Version: 1.10.1-2
Depends: libc6 (>= 2.27), libselinux1 (>= 1.32), libxml2 (>= 2.7.4), augeas-lenses
Suggests: augeas-tools
Description: Augeas configuration editing library and API
Augeas is a configuration editing tool. It parses configuration files in their
native formats and transforms them into a tree. Configuration changes are made
by manipulating this tree and saving it back into native config files.
.
The transformation works very hard to preserve comments and formatting
details. It is controlled by ``lens'' definitions that describe the file
format and the transformation into a tree.
Original-Maintainer: Hilko Bengen <bengen@debian.org>
Homepage: http://augeas.net/
Package: node-pseudomap
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.2-1
Depends: nodejs
Description: like ES6 `Map`, but without iterators
A thing that is a lot like ES6 `Map`, but without iterators, for use in
environments where `for..of` syntax and `Map` are not available.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/pseudomap#readme
Package: cloud-initramfs-copymods
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 23
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.40ubuntu1
Depends: initramfs-tools
Description: copy initramfs modules into root filesystem for later use
When booting with an external-to-root kernel and initramfs, you need
to ensure that /lib/modules contains any necessary modules not already
loaded.
.
This package arranges for the modules in the initramfs to be placed
into /lib/modules after the switchroot is done.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: linux-base
Status: install ok installed
Priority: important
Section: kernel
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.5ubuntu1.2
Depends: debconf (>= 0.5) | debconf-2.0
Description: Linux image base package
This package contains files and support scripts for all Linux
images.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.11.0-2
Depends: python3:any (>= 3.4~)
Description: Python 2 and 3 compatibility library (Python 3 interface)
Six is a Python 2 and 3 compatibility library. It provides utility
functions for smoothing over the differences between the Python versions
with the goal of writing Python code that is compatible on both Python
versions.
.
This package provides Six on the Python 3 module path. It is complemented
by python-six and pypy-six.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/six
Package: python3-icu
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 752
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pyicu
Version: 1.9.8-0ubuntu1
Provides: python3.6-icu
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.0), libicu60 (>= 60.1-1~), libstdc++6 (>= 4.9), python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~)
Description: Python 3 extension wrapping the ICU C++ API
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package provides an extension for
Python 3 which wraps the ICU C++ API.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/PyICU/
Package: libpangoxft-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.12), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.22.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, libxft2 (>> 2.1.1), libxrender1
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Depends: dirmngr (= 2.2.4-1ubuntu1.6), gnupg-l10n (= 2.2.4-1ubuntu1.6), gnupg-utils (= 2.2.4-1ubuntu1.6), gpg (= 2.2.4-1ubuntu1.6), gpg-agent (= 2.2.4-1ubuntu1.6), gpg-wks-client (= 2.2.4-1ubuntu1.6), gpg-wks-server (= 2.2.4-1ubuntu1.6), gpgsm (= 2.2.4-1ubuntu1.6), gpgv (= 2.2.4-1ubuntu1.6)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.4-1ubuntu1.6), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4), software-properties-common (<= 0.96.24.3)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the full suite of GnuPG tools for cryptographic
communications and data storage.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libsoup2.4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsoup2.4
Version: 2.62.1-1ubuntu0.4
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.39.90), libgssapi-krb5-2 (>= 1.14+dfsg), libsqlite3-0 (>= 3.5.9), libxml2 (>= 2.7.4), glib-networking (>= 2.32.0)
Description: HTTP library implementation in C -- Shared library
It was originally part of a SOAP (Simple Object Access Protocol)
implementation called Soup, but the SOAP and non-SOAP parts have now been
split into separate packages.
.
libsoup uses the Glib main loop and is designed to work well with GTK+
applications. This enables GNOME applications to access HTTP servers
on the network in a completely asynchronous fashion, very similar to
the GTK+ programming model (a synchronous operation mode is also
supported for those who want it).
.
Features:
* Both asynchronous (GMainLoop and callback-based) and synchronous APIs
* Automatically caches connections
* SSL Support using GnuTLS
* Proxy support, including authentication and SSL tunneling
* Client support for Digest, NTLM, and Basic authentication
* Server support for Digest and Basic authentication
* Basic client-side SOAP and XML-RPC support
.
This package contains the shared library.
Homepage: https://wiki.gnome.org/Projects/libsoup
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 554
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-21ubuntu1.2
Depends: libbz2-1.0, libc6 (>= 2.14)
Suggests: zip
Description: De-archiver for .zip files
InfoZIP's unzip program. With the exception of multi-volume archives
(ie, .ZIP files that are split across several disks using PKZIP's /& option),
this can handle any file produced either by PKZIP, or the corresponding
InfoZIP zip program.
.
This version supports encryption.
Homepage: http://www.info-zip.org/UnZip.html
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: libproxy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libproxy
Version: 0.4.15-1ubuntu0.2
Replaces: libproxy1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Conflicts: libproxy1
Description: automatic proxy configuration management library (shared)
libproxy is a lightweight library which makes it easy to develop
applications proxy-aware with a simple and stable API.
.
This package contains the shared library.
Homepage: https://libproxy.github.io/libproxy/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 5635
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 4.15.0-213.224
Replaces: linux-kernel-headers
Provides: aufs-dev, linux-kernel-headers
Conflicts: linux-kernel-headers
Description: Linux Kernel Headers for development
This package provides headers from the Linux kernel. These headers
are used by the installed headers for GNU glibc and other system
libraries. They are NOT meant to be used to build third-party modules for
your kernel. Use linux-headers-* packages for that.
Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1083
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.0.1-1
Depends: libc6 (>= 2.14), libgmp10
Breaks: libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~)
Description: multiple precision floating-point computation
MPFR provides a library for multiple-precision floating-point computation
with correct rounding. The computation is both efficient and has a
well-defined semantics. It copies the good ideas from the
ANSI/IEEE-754 standard for double-precision floating-point arithmetic
(53-bit mantissa).
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: http://www.mpfr.org/
Package: libtiff5-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 972
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.0.9-5ubuntu0.10
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.0.9-5ubuntu0.10), libtiffxx5 (= 4.0.9-5ubuntu0.10), zlib1g-dev
Conflicts: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~)
Description: Tag Image File Format library (TIFF), development files
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
Homepage: http://libtiff.maptools.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: python3-colorama
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-colorama
Version: 0.3.7-1
Depends: python3:any (>= 3.4~)
Description: Cross-platform colored terminal text in Python - Python 3.x
Python-colorama provides a simple cross-platform API to print colored terminal
text from Python applications.
.
ANSI escape character sequences are commonly used to produce colored terminal
text on Unix. Colorama provides some shortcuts to generate these sequences.
.
This has the happy side-effect that existing applications or libraries which
already use ANSI sequences to produce colored output on Linux.
.
This package provides the module for Python 3.
Original-Maintainer: Khalid El Fathi <khalid@elfathi.fr>
Homepage: http://pypi.python.org/pypi/colorama/
Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 370
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Replaces: bash-completion (<< 1:2.1-4.3~)
Depends: util-linux (>= 2.30.1-0ubuntu4~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.30.2), libsmartcols1 (>= 2.27~rc1)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
This package provides the mount(8), umount(8), swapon(8),
swapoff(8), and losetup(8) commands.
Important: yes
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: libhcrypto4-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libheimbase1-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - crypto library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the cryptographic library required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: linux-image-5.4.0-1089-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10315
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1089.97~18.04.1
Config-Version: 5.4.0-1089.97~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1089-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1089-aws
Conflicts: linux-image-unsigned-5.4.0-1089-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1089.97~18.04.1)
Package: libgnutls30
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1716
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.5.18-1ubuntu1.6
Depends: libc6 (>= 2.25), libgmp10 (>= 2:6), libhogweed4, libidn2-0 (>= 0.6), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.12), libunistring2 (>= 0.9.7), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
GnuTLS is a portable library which implements the Transport Layer
Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
Transport Layer Security (DTLS 1.0, 1.2) protocols.
.
GnuTLS features support for:
- TLS extensions: server name indication, max record size, opaque PRF
input, etc.
- authentication using the SRP protocol.
- authentication using both X.509 certificates and OpenPGP keys.
- TLS Pre-Shared-Keys (PSK) extension.
- Inner Application (TLS/IA) extension.
- X.509 and OpenPGP certificate handling.
- X.509 Proxy Certificates (RFC 3820).
- all the strong encryption algorithms (including SHA-256/384/512 and
Camellia (RFC 4132)).
.
This package contains the main runtime library.
Homepage: http://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1358
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.6.4-3ubuntu0.4
Depends: libc6 (>= 2.15), libxcb1 (>= 1.11.1), libx11-data
Description: X11 client-side library
This package provides a client interface to the X Window System, otherwise
known as 'Xlib'. It provides a complete API for the basic functions of the
window system.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.4
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27~101-g0780600+dfsg-3ubuntu2.4), libc6 (>= 2.15)
Recommends: libsasl2-modules (>= 2.1.27~101-g0780600+dfsg-3ubuntu2.4)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
This is the Cyrus SASL API implementation, version 2.1.
.
SASL is the Simple Authentication and Security Layer, a method for
adding authentication support to connection-based protocols. To use
SASL, a protocol includes a command for identifying and
authenticating a user to a server and for optionally negotiating
protection of subsequent protocol interactions. If its use is
negotiated, a security layer is inserted between the protocol and the
connection. See RFC 2222 for more information.
.
Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1092-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10312
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1092.100~18.04.2
Config-Version: 5.4.0-1092.100~18.04.2
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1092-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1092-aws
Conflicts: linux-image-unsigned-5.4.0-1092-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1092.100~18.04.2)
Package: libxml2-utils
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 176
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libxml2
Version: 2.9.10+dfsg-5+ubuntu18.04.1+deb.sury.org+3
Depends: libc6 (>= 2.14), libxml2 (>= 2.9.0)
Description: XML utilities
XML is a metalanguage to let you design your own markup language.
A regular markup language defines a way to describe information in
a certain class of documents (eg HTML). XML lets you define your
own customized markup languages for many classes of document. It
can do this because it's written in SGML, the international standard
metalanguage for markup languages.
.
This package provides xmllint, a tool for validating and reformatting
XML documents, and xmlcatalog, a tool to parse and manipulate XML or
SGML catalog files.
Homepage: http://xmlsoft.org
Package: dns-root-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2018013001
Description: DNS root data including root zone and DNSSEC key
This package contains various root zone related data as published
by IANA to be used by various DNS software as a common source
of DNS root zone data, namely:
.
* Root Hints (root.hints)
* Root Trust Anchors (root.key, root.ds)
Original-Maintainer: dns-root-data packagers <dns-root-data@packages.debian.org>
Homepage: https://data.iana.org/root-anchors/
Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 4030
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apache2
Version: 2.4.29-1ubuntu4.27
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: libapr1 (>= 1.6.2), libaprutil1 (>= 1.6.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libc6 (>= 2.14), libldap-2.4-2 (>= 2.4.7), liblua5.2-0, libnghttp2-14 (>= 1.15.0), libpcre3, libssl1.1 (>= 1.1.1), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), perl:any
Suggests: www-browser, apache2-doc, apache2-suexec-pristine | apache2-suexec-custom
Breaks: gridsite (<< 3.0.0~20170225gitd51b2fd-1~), libapache2-mod-dacs (<= 1.4.38a-2)
Description: Apache HTTP Server (modules and other binary files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains the binaries only and does not set up a working
web-server instance. Install the "apache2" package to get a fully working
instance.
Homepage: http://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libsystemd0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 657
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.57
Pre-Depends: libc6 (>= 2.27), libgcrypt20 (>= 1.8.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614)
Description: systemd utility library
The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: doxygen
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.13-10
Depends: libc6 (>= 2.14), libclang1-6.0 (>= 1:5.0~svn298832-1~), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libxapian30
Suggests: doxygen-latex, doxygen-doc, doxygen-gui, graphviz
Conflicts: graphviz (<< 1.12)
Description: Documentation system for C, C++, Java, Python and other languages
Doxygen is a documentation system for C, C++, Java, Objective-C, Python, IDL
and to some extent PHP, C#, and D. It can generate an on-line class browser
(in HTML) and/or an off-line reference manual (in LaTeX) from a set of
documented source files. There is also support for generating man pages
and for converting the generated output into Postscript, hyperlinked PDF
or compressed HTML. The documentation is extracted directly from the sources.
.
Install the doxygen-latex package to build LaTeX based documents.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://www.stack.nl/~dimitri/doxygen/
Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2024
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.19.0.5ubuntu2.4
Depends: perl, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils
Suggests: debian-keyring, gnupg | gnupg2, gpgv | gpgv2, gcc | c-compiler, binutils, patch, git, bzr
Breaks: dgit (<< 3.13~), patch (<< 2.7), pkg-kde-tools (<< 0.15.28~)
Description: Dpkg perl modules
This package provides the perl modules used by the scripts
in dpkg-dev. They cover a wide range of functionality. Among them
there are the following public modules:
.
- Dpkg: core variables
- Dpkg::Arch: architecture handling functions
- Dpkg::Build::Info: build information functions
- Dpkg::BuildFlags: set, modify and query compilation build flags
- Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
- Dpkg::BuildProfile: parse and manipulate build profiles
- Dpkg::Changelog: parse changelogs
- Dpkg::Changelog::Entry: represents a changelog entry
- Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
- Dpkg::Checksums: generate and parse checksums
- Dpkg::Compression: simple database of available compression methods
- Dpkg::Compression::Process: wrapper around compression tools
- Dpkg::Compression::FileHandle: transparently (de)compress files
- Dpkg::Conf: parse dpkg configuration files
- Dpkg::Control: parse and manipulate Debian control information
(.dsc, .changes, Packages/Sources entries, etc.)
- Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
- Dpkg::Control::Fields: manage (list of known) control fields
- Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
- Dpkg::Control::Info: parse files like debian/control
- Dpkg::Control::Tests: parse files like debian/tests/control
- Dpkg::Deps: parse and manipulate dependencies
- Dpkg::Exit: push, pop and run exit handlers
- Dpkg::Gettext: wrapper around Locale::gettext
- Dpkg::IPC: spawn sub-processes and feed/retrieve data
- Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
example)
- Dpkg::Interface::Storable: base object serializer
- Dpkg::Path: common path handling functions
- Dpkg::Source::Package: extract Debian source packages
- Dpkg::Substvars: substitute variables in strings
- Dpkg::Vendor: identify current distribution vendor
- Dpkg::Version: parse and manipulate Debian package versions
.
All the packages listed in Suggests or Recommends are used by some of the
modules.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: libzstd1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 519
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.3.3+dfsg-2ubuntu1.2
Depends: libc6 (>= 2.14)
Description: fast lossless compression algorithm
Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
real-time compression scenarios at zlib-level compression ratio.
.
This package contains the shared library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1166
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02-2ubuntu8.25
Replaces: grub, grub-common (<< 1.99-1), grub-coreboot (<< 2.02-2ubuntu8.25), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.04-1ubuntu47.4), grub-efi-arm (<< 2.02-2ubuntu8.25), grub-efi-arm64 (<< 2.04-1ubuntu47.4), grub-efi-ia32 (<< 2.02-2ubuntu8.25), grub-efi-ia64 (<< 2.02-2ubuntu8.25), grub-ieee1275 (<< 2.02-2ubuntu8.25), grub-legacy, grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02-2ubuntu8.25), grub-uboot (<< 2.02-2ubuntu8.25), grub-xen (<< 2.02-2ubuntu8.25), grub-yeeloong (<< 2.02-2ubuntu8.25)
Depends: grub-common (= 2.02-2ubuntu8.25), dpkg (>= 1.15.4) | install-info, libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-coreboot (<< 2.02-2ubuntu8.25), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.04-1ubuntu47.4), grub-efi-arm (<< 2.02-2ubuntu8.25), grub-efi-arm64 (<< 2.04-1ubuntu47.4), grub-efi-ia32 (<< 2.02-2ubuntu8.25), grub-efi-ia64 (<< 2.02-2ubuntu8.25), grub-ieee1275 (<< 2.02-2ubuntu8.25), grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02-2ubuntu8.25), grub-uboot (<< 2.02-2ubuntu8.25), grub-xen (<< 2.02-2ubuntu8.25), grub-yeeloong (<< 2.02-2ubuntu8.25), shim (<< 13)
Conflicts: grub-legacy
Conffiles:
/etc/kernel/postinst.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
/etc/kernel/postrm.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
Description: GRand Unified Bootloader (common files for version 2)
This package contains common files shared by the distinct flavours of GRUB.
The files in this package are specific to GRUB 2, and would break GRUB
Legacy if installed on the same system.
Homepage: http://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 859
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.2.4-1ubuntu1.6), pinentry-curses | pinentry, libassuan0 (>= 2.5.1), libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
/etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
/etc/logcheck/ignore.d.server/gpg-agent 040d545c7f33c0581fd2ae198dab1d7a
Description: GNU privacy guard - cryptographic agent
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the agent program gpg-agent which handles all
secret key material for OpenPGP and S/MIME use. The agent also
provides a passphrase cache, which is used by pre-2.1 versions of
GnuPG for OpenPGP operations. Without this package, trying to do
secret-key operations with any part of the modern GnuPG suite will
fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: whois
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 256
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.3.0
Depends: libc6 (>= 2.25)
Description: intelligent WHOIS client
This package provides a commandline client for the WHOIS (RFC 3912)
protocol, which queries online servers for information such as contact
details for domains and IP address assignments.
It can intelligently select the appropriate WHOIS server for most queries.
.
The package also contains mkpasswd, a features-rich front end to the
password encryption function crypt(3).
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: python3.6-minimal
Status: install ok installed
Priority: important
Section: python
Installed-Size: 8967
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.6
Version: 3.6.9-1~18.04ubuntu1.12
Depends: libpython3.6-minimal (= 3.6.9-1~18.04ubuntu1.12), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.25)
Recommends: python3.6
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.6)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.6-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 11887
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.27-3ubuntu1.5
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.27), locales-all (<< 2.27), nscd (<< 2.27)
Conflicts: openrc (<< 0.27-2~)
Conffiles:
/etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: linux-image-5.4.0-1029-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9077
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1029.30~18.04.1
Config-Version: 5.4.0-1029.30~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1029-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1029-aws
Conflicts: linux-image-unsigned-5.4.0-1029-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.4.0-1093-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69626
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1093.102~18.04.2
Config-Version: 5.4.0-1093.102~18.04.2
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python2.7
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 383
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 2.7.17-1~18.04ubuntu1.11
Replaces: python-profiler (<= 2.7.1-2), python2.7-minimal (<< 2.7.3-7~)
Depends: python2.7-minimal (= 2.7.17-1~18.04ubuntu1.11), libpython2.7-stdlib (= 2.7.17-1~18.04ubuntu1.11), mime-support
Suggests: python2.7-doc, binutils
Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4)
Conflicts: python-profiler (<= 2.7.1-2)
Description: Interactive high-level object-oriented language (version 2.7)
Python is a high-level, interactive, object-oriented language. Its 2.7 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: mlocate
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.26-2ubuntu3.1
Depends: libc6 (>= 2.14), adduser
Conflicts: findutils (<= 4.2.31-1), slocate (<= 3.1-1.1)
Conffiles:
/etc/cron.daily/mlocate fff913b768aa9c94f9012a8593446ebc
/etc/updatedb.conf 938f0f288ec268b7d59a0d6275566e6f
Description: quickly find files on the filesystem based on their name
mlocate is a new implementation of locate, a tool to find files
anywhere in the filesystem based on their name, using a fixed pattern
or a regular expression. Unlike other tools like find(1), locate uses
a previously created database to perform the search, allowing queries
to execute much faster. This database is updated periodically from
cron.
.
Several implementations of locate exist: the original implementation
from GNU's findutils, slocate, and mlocate. The advantages of mlocate
are:
.
* it indexes all the filesystem, but results of a search will only
include files that the user running locate has access to. It does
this by updating the database as root, but making it unreadable for
normal users, who can only access it via the locate binary. slocate
does this as well, but not the original locate.
.
* instead of re-reading all the contents of all directories each time
the database is updated, mlocate keeps timestamp information in its
database and can know if the contents of a directory changed without
reading them again. This makes updates much faster and less demanding
on the hard drive. This feature is only found in mlocate.
.
Installing mlocate will change the /usr/bin/locate binary to point to
mlocate via the alternatives mechanism. After installation, you may
wish to run /etc/cron.daily/mlocate by hand to create the database,
otherwise mlocate won't work until that script is run from cron itself
(since mlocate does not use the same database file as standard locate).
Also, you may wish to remove the "locate" package in order not to have
two different database files updated regularly on your system.
Homepage: https://pagure.io/mlocate
Original-Maintainer: Tollef Fog Heen <tfheen@debian.org>
Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 448
Maintainer: GD Team <team+gd@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.2.5-5.2+ubuntu18.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libwebp6 (>= 0.5.1), libxpm4, zlib1g (>= 1:1.1.4)
Suggests: libgd-tools
Description: GD Graphics Library
GD is a graphics library. It allows your code to quickly draw images
complete with lines, arcs, text, multiple colours, cut and paste from
other images, flood fills, and write out the result as a PNG file.
This is particularly useful in World Wide Web applications, where PNG is
one of the formats accepted for inline images by most browsers.
.
This is the runtime package of the library.
Homepage: http://www.libgd.org/
Package: libclang1-6.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-6.0
Version: 1:6.0-1ubuntu2
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.4), libllvm6.0 (>= 1:6.0~svn298832-1~), libstdc++6 (>= 6)
Description: C interface to the clang library
Clang project is a C, C++, Objective C and Objective C++ front-end
based on the LLVM compiler. Its goal is to offer a replacement to the
GNU Compiler Collection (GCC).
.
Clang implements all of the ISO C++ 1998, 11 and 14 standards and also
provides most of the support of C++17.
.
This package contains the clang library.
.
The C Interface to Clang provides a relatively small API that exposes
facilities for parsing source code into an abstract syntax tree (AST),
loading already-parsed ASTs, traversing the AST, associating physical source
locations with elements within the AST, and other facilities that support
Clang-based development tools.
Homepage: http://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1057-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69535
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1057.60~18.04.1
Config-Version: 5.4.0-1057.60~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libiptc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.1-2ubuntu2
Depends: libc6 (>= 2.2.5)
Description: netfilter libiptc library
The user-space iptables C library from the Netfilter xtables framework.
.
iptables v4/v6 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1028-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65589
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1028.29~18.04.1
Config-Version: 5.4.0-1028.29~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: gir1.2-gdkpixbuf-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.36.11-2
Depends: gir1.2-glib-2.0 (>= 0.9.3), libgdk-pixbuf2.0-0 (>= 2.36.9)
Description: GDK Pixbuf library - GObject-Introspection
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
.
It can be used by packages using the GIRepository format to generate
dynamic bindings.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.gtk.org/
Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 870
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.29-1ubuntu4.27
Description: Apache HTTP Server (common files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains architecture-independent common files such as icons,
error pages and static index files.
Homepage: http://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: linux-modules-5.3.0-1035-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64655
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1035.37
Config-Version: 5.3.0-1035.37
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: os-prober
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 103
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.74ubuntu1
Depends: libc6 (>= 2.4), grub-common, dmsetup
Description: utility to detect other OSes on a set of drives
This package detects other OSes available on a system and outputs the
results in a generic machine-readable format.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libssl1.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 7081
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2n-1ubuntu5.13
Depends: libssl1.0.0 (= 1.0.2n-1ubuntu5.13)
Conflicts: libssl-dev
Description: Secure Sockets Layer toolkit - development files
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It contains development libraries, header files, and manpages for libssl
and libcrypto.
Homepage: https://www.openssl.org
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1069-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10311
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1069.73~18.04.1
Config-Version: 5.4.0-1069.73~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1069-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1069-aws
Conflicts: linux-image-unsigned-5.4.0-1069-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1069.73~18.04.1)
Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3766
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.35-2ubuntu2.16
Depends: libc6 (>= 2.14), libnspr4 (>= 2:4.12), libsqlite3-0 (>= 3.5.9)
Conflicts: libnss3-1d (<< 2:3.13.4-2)
Description: Network Security Service libraries
This is a set of libraries designed to support cross-platform development
of security-enabled client and server applications. It can support SSLv2
and v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
other security standards.
Homepage: http://www.mozilla.org/projects/security/pki/nss/
Original-Maintainer: Maintainers of Mozilla-related packages <pkg-mozilla-maintainers@lists.alioth.debian.org>
Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.36.11-2
Description: GDK Pixbuf library - data files
This package contains the common files and translations for the GDK
Pixbuf library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.gtk.org/
Package: libxrender-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1
Depends: libxrender1 (= 1:0.9.10-1), libx11-dev (>= 2:1.0.0), x11proto-render-dev, x11proto-core-dev
Description: X Rendering Extension client library (development files)
The X Rendering Extension (Render) introduces digital image composition as
the foundation of a new rendering model within the X Window System.
Rendering geometric figures is accomplished by client-side tessellation into
either triangles or trapezoids. Text is drawn by loading glyphs into the
server and rendering sets of them. The Xrender library exposes this
extension to X clients.
.
This package provides a static library and C header files.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXrender
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-modules-5.4.0-1083-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69733
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1083.90~18.04.1
Config-Version: 5.4.0-1083.90~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: overlayroot
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 65
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.40ubuntu1
Depends: cryptsetup, cryptsetup-bin, initramfs-tools
Suggests: haveged
Conffiles:
/etc/overlayroot.conf 40086f3ab7223af23f79225c60b4d47d
/etc/update-motd.d/97-overlayroot 51a409ec9a8608f9c5fa3f6605c78dd9
Description: use an overlayfs on top of a read-only root filesystem
This package adds functionality to an initramfs built by initramfs-tools.
When installed and configured, the initramfs will mount an overlayfs
filesystem on top of a read-only root volume.
.
The changes can be written to a in-memory temporary filesystem, a
filesystem on an existing block device, or a dmcrypt encrypted block
device.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 662
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 1.7.2-1ubuntu1
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.14), libfreetype6 (>= 2.7.1), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certifi
Version: 2018.1.18-2
Depends: python3:any (>= 3.4~), ca-certificates
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
Certifi is a carefully curated collection of Root Certificates for
validating the trustworthiness of SSL certificates while verifying
the identity of TLS hosts. It has been extracted from the Requests
project.
.
The version of certifi in this Debian package is patched to return
the location of Debian-provided CA certificates, instead of those
packaged by upstream.
.
This is the python3 package.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://certifi.io/en/latest/
Package: glib-networking-services
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib-networking
Version: 2.56.0-1ubuntu0.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.55.0), libproxy1v5 (>= 0.4.14), glib-networking-common (>= 2.56.0-1ubuntu0.1)
Recommends: glib-networking
Description: network-related giomodules for GLib - D-Bus services
This package contains D-Bus services that are used by the GIO network
extensions in glib-networking, for actions that need to be done in a
separate process.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: node-spdx-license-ids
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2.2-1
Depends: nodejs
Description: List of SPDX license identifiers
A list of SPDX license identifiers. The SPDX License List is a list of
commonly found licenses and exceptions used for open source and other
collaborative software.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/shinnn/spdx-license-ids#readme
Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1851
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.12-4ubuntu5.3
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, lsb-base, debconf (>= 0.5) | debconf-2.0, python3:any, libc6 (>= 2.17)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: fcitx-data (<< 1:4.2.9.1-1ubuntu2), media-hub, mediascanner2.0, messaging-app, webbrowser-app
Conffiles:
/etc/apparmor.d/abstractions/X e6facb406ee833df6d538f0060f5d99c
/etc/apparmor.d/abstractions/apache2-common a5e5f684da7023f93ffa8859d0c69223
/etc/apparmor.d/abstractions/apparmor_api/change_profile 9f4c0a621f4939af15588b7fe670dfe7
/etc/apparmor.d/abstractions/apparmor_api/examine f3b118b0344df2bcf4d18b81b45536bd
/etc/apparmor.d/abstractions/apparmor_api/find_mountpoint cf9e6513e00b441c0e3fbaf57b5c5110
/etc/apparmor.d/abstractions/apparmor_api/introspect 4c345c7e02de097f250c3ab12a442bed
/etc/apparmor.d/abstractions/apparmor_api/is_enabled d98f1c1f3f41075007943f3ef072bd99
/etc/apparmor.d/abstractions/aspell fdcbf54106fd1ee376d4ade77e720488
/etc/apparmor.d/abstractions/audio e03512df51c7e1fa248edfc7fdc13c04
/etc/apparmor.d/abstractions/authentication 4ca6d1cf0d2d782f23059939670643c2
/etc/apparmor.d/abstractions/base e8df433c17efd6e769e3a4c5d6870cb0
/etc/apparmor.d/abstractions/bash 4a5f51dc0fe10de2eba86b22351ae092
/etc/apparmor.d/abstractions/consoles c7e6e00c4845e9afb877359691946386
/etc/apparmor.d/abstractions/cups-client ea86b52242df406f0bc955039f990006
/etc/apparmor.d/abstractions/dbus db5bb2211ee5ecf1d2d4eb72c0e52617
/etc/apparmor.d/abstractions/dbus-accessibility 1a9829023057d91f2f709b49ded37c87
/etc/apparmor.d/abstractions/dbus-accessibility-strict 0e07c997566b1d71b9287c0a3dcb1292
/etc/apparmor.d/abstractions/dbus-session e9dabe52be01410c4e4c9a9e8ef9779d
/etc/apparmor.d/abstractions/dbus-session-strict 1b337318faff3bd439f86dfc4b040d1d
/etc/apparmor.d/abstractions/dbus-strict d2a901e0369ab95a244828e2d296276e
/etc/apparmor.d/abstractions/dconf 02249fe91402fccef01161a61c557098
/etc/apparmor.d/abstractions/dovecot-common 76f2f15c26a2a4f4ebe621848c696dcf
/etc/apparmor.d/abstractions/enchant a1ac9629b466be8a41cb5f87757f3363
/etc/apparmor.d/abstractions/fcitx 3c43cb38623c123d8a64a02aae42b452
/etc/apparmor.d/abstractions/fcitx-strict dbf5ff5b2fcbaa30bd47eb6789190485
/etc/apparmor.d/abstractions/fonts 8a01af3a688820730425d47b3e43d460
/etc/apparmor.d/abstractions/freedesktop.org f375c96c79327c0efb7638e47c325493
/etc/apparmor.d/abstractions/gnome 71a02a4641599afd988a361dc09c34fb
/etc/apparmor.d/abstractions/gnupg 7cde476e7fc1b5e3ae1ff8a15f0bd524
/etc/apparmor.d/abstractions/ibus 3e70b36c4931993a0a37d50fa6ddc1ec
/etc/apparmor.d/abstractions/kde c51da7a01bb8eaa94410a6394c2d05c3
/etc/apparmor.d/abstractions/kerberosclient 165918f6f7a43c7f8026ff330500a1ba
/etc/apparmor.d/abstractions/launchpad-integration 08239d10ba383041e97bc7f3962eb788
/etc/apparmor.d/abstractions/ldapclient f6d4bac77e72abbace3805ad95dc5fad
/etc/apparmor.d/abstractions/libpam-systemd fdeb09a6c1f0d201abfd5cd12262a3b7
/etc/apparmor.d/abstractions/likewise eda6f01c5c1f1f09bc85a7f3a1d3ebaf
/etc/apparmor.d/abstractions/mdns d4959c984a530f8c682e31f34927d57e
/etc/apparmor.d/abstractions/mir d40c45b5284efa1e7aa8e473bf3eaa63
/etc/apparmor.d/abstractions/mozc fde97592da93e4b4ec9667cc0a38cd11
/etc/apparmor.d/abstractions/mysql be34db29008a5c06387c6928b0536ecc
/etc/apparmor.d/abstractions/nameservice 697598c38e71181cb9b7f5353fdc1360
/etc/apparmor.d/abstractions/nis b2a829a4e26dd3ae92ec2f67536edc20
/etc/apparmor.d/abstractions/nvidia cf1d22b35ec9d678ad037f7dcc09a876
/etc/apparmor.d/abstractions/openssl 774ca398a166520a1cdb84d8b8a7b7dc
/etc/apparmor.d/abstractions/orbit2 98b6459f02e5c68e6ef83dced628ea5f
/etc/apparmor.d/abstractions/p11-kit dc059947c11d3f353c380ca7547390ce
/etc/apparmor.d/abstractions/perl 2efc405658e3cbcfdca9e95bfdecdcff
/etc/apparmor.d/abstractions/php 00a8102eef7749f675d988227ec3a4ff
/etc/apparmor.d/abstractions/php5 491c7cb0bc6d38adbe874d782359ca33
/etc/apparmor.d/abstractions/postfix-common 01ab59eb3ee004960446eb8afbc48bcb
/etc/apparmor.d/abstractions/private-files f2220f8a54fee55e89ec68b11bee8bfd
/etc/apparmor.d/abstractions/private-files-strict a78752cbf27bf539e256b592d522a9fd
/etc/apparmor.d/abstractions/python f0686901654e561535195d6978929cb3
/etc/apparmor.d/abstractions/ruby 2747c396fa14819b92683e23e8f5a889
/etc/apparmor.d/abstractions/samba 159f66945be45a89c2d15d3353e1c4a1
/etc/apparmor.d/abstractions/smbpass b4d3be08dff2a9e3b4f1a18ddb65c63c
/etc/apparmor.d/abstractions/ssl_certs 5ab2ce340de889398d1d3564456c29c4
/etc/apparmor.d/abstractions/ssl_keys 9a2a3a3daaaf3047bf17cb73a5eafcfb
/etc/apparmor.d/abstractions/svn-repositories 8bc8a123d9ce516c53b818b8a4fc0ed1
/etc/apparmor.d/abstractions/ubuntu-bittorrent-clients 1398edfc93d57694774bcad9b83e6764
/etc/apparmor.d/abstractions/ubuntu-browsers 6b2d87ce410afa18803b2df40bf632d8
/etc/apparmor.d/abstractions/ubuntu-browsers.d/java aff8e6f00e172b20735f61969fb8ab59
/etc/apparmor.d/abstractions/ubuntu-browsers.d/kde 15541761a5dbdc5ccd12e85e2afe4094
/etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto e60b3e4611a14d835d8b6fe0ffe27fc2
/etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia a4d49472876b6cfc23530f853ce4c7ea
/etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common 07e327f4e32e2333db1f609c87831b65
/etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity dd54584ceece9aa1ee9c3c71418cd9ae
/etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 006c96f21261b0c15e2f453527136973
/etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration a3146cbc94bc1d8172fa09135fb82d7c
/etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul a6d33002626e1d9a81a490e2f61509fa
/etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files 3e31dcbbf3c77dc50d31245357ad2c4c
/etc/apparmor.d/abstractions/ubuntu-console-browsers d560f0509cdc8ffcdfa1dc115eee88f1
/etc/apparmor.d/abstractions/ubuntu-console-email 1ebfacc8ac5cfba7f3d59baceae52af8
/etc/apparmor.d/abstractions/ubuntu-email 86920e7f6f3acbcd28b1d046d9de5a19
/etc/apparmor.d/abstractions/ubuntu-feed-readers b8eb233df01672f4941357487b39cda9
/etc/apparmor.d/abstractions/ubuntu-gnome-terminal 886de107666e17033b11aa3abb1ce054
/etc/apparmor.d/abstractions/ubuntu-helpers ce2542f656f59509856e18b0afad3e0d
/etc/apparmor.d/abstractions/ubuntu-konsole 2ba4958d99c66160f118b5cda90b26c7
/etc/apparmor.d/abstractions/ubuntu-media-players ff25e51b62d2bf5146134ae3c6530c6b
/etc/apparmor.d/abstractions/ubuntu-unity7-base 9adb20c938466802c326a75667d06a3f
/etc/apparmor.d/abstractions/ubuntu-unity7-launcher 96f03042c5465f46ddadf15691507414
/etc/apparmor.d/abstractions/ubuntu-unity7-messaging 4b9196db0bc697cb80f7e211edc78ae0
/etc/apparmor.d/abstractions/ubuntu-xterm bef5766269999b9e73ad6e11dd7930bd
/etc/apparmor.d/abstractions/user-download 87e37fbec5bf0c055db102d71205e2a0
/etc/apparmor.d/abstractions/user-mail c9951880d0b3d64365a870320fbc4d50
/etc/apparmor.d/abstractions/user-manpages c59f25e289e9a426807ab5830136aa42
/etc/apparmor.d/abstractions/user-tmp 93247b3296a7f0bff353eb9ee11fba06
/etc/apparmor.d/abstractions/user-write 5d5f3787434d3723fde32929c1496e49
/etc/apparmor.d/abstractions/video 2194baba2007ea20698441bc333f9446
/etc/apparmor.d/abstractions/wayland ba356d31c77b2505149d3635464f1f48
/etc/apparmor.d/abstractions/web-data 36eb024800c81ef69733027f1a27a907
/etc/apparmor.d/abstractions/winbind 3b37bfd8193e84c6d08809750346e7c1
/etc/apparmor.d/abstractions/wutmp 3cb05ef8e125c7c3edf00a505dd9e68f
/etc/apparmor.d/abstractions/xad 0b2fdc7be71e977e240d77338f414ec7
/etc/apparmor.d/abstractions/xdg-desktop d891f70210acc01e42c525012a1c3fc6
/etc/apparmor.d/local/README b2c6b40577b4099c584cdf731f5aeb0b
/etc/apparmor.d/tunables/alias 45dca5dd72a6c862d27caa936e6c00ad
/etc/apparmor.d/tunables/apparmorfs 5797c1a5b267c3f51d983ab8daf8f587
/etc/apparmor.d/tunables/dovecot 1b0d5ec63a9c87387142bdb2c94e7ede
/etc/apparmor.d/tunables/global 9bfa12c972f13c06aeff3e7b59c65b89
/etc/apparmor.d/tunables/home ec0b11e815b30dc6fbf4d05a41aff9f5
/etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
/etc/apparmor.d/tunables/kernelvars e40785bf1c0ef9d0ee466672d7ce2177
/etc/apparmor.d/tunables/multiarch 6ebecd63690d4a53f3e7ff6ae48941ca
/etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
/etc/apparmor.d/tunables/proc ffaa055ceb36031c973ffaece22a5fc0
/etc/apparmor.d/tunables/securityfs bb3695a39a1bb8a5399f76b95bacc40f
/etc/apparmor.d/tunables/sys ba0699f2f961179a3352cb3de3e9f586
/etc/apparmor.d/tunables/xdg-user-dirs 602eaa969d2dfa00a0ec16eed9b60b7f
/etc/apparmor/parser.conf 8fed7a9ec65d4f695e2aa14faf261c8b
/etc/apparmor/subdomain.conf df4dade439e2786fd1d227c99164563d
/etc/init.d/apparmor 458ba0335ba2c1c2dce836092bc736d6
Description: user-space parser utility for AppArmor
apparmor provides the system initialization scripts needed to use the
AppArmor Mandatory Access Control system, including the AppArmor Parser
which is required to convert AppArmor text profiles into machine-readable
policies that are loaded into the kernel for use with the AppArmor Linux
Security Module.
Homepage: http://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.37ubuntu0.18
Replaces: distro-info (<< 0.3~)
Breaks: distro-info (<< 0.18ubuntu0.18.04.1~)
Description: information about the distributions' releases (data files)
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
.
This package contains the data files.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>
Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdatrie
Version: 0.2.10-7
Depends: libc6 (>= 2.14)
Description: Double-array trie library
This package provides shared libraries needed to run programs that use the
datrie library. It is usually automatically installed.
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Homepage: https://linux.thai.net/projects/libthai
Package: libtiff5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 520
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.0.9-5ubuntu0.10
Depends: libc6 (>= 2.14), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library.
Homepage: http://libtiff.maptools.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 710
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.19.8.1-6ubuntu0.3
Depends: libc6 (>= 2.14)
Description: GNU Internationalization utilities for the base system
This package includes the gettext and ngettext programs which allow
other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: node-combined-stream
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.5-1
Depends: nodejs, node-delayed-stream
Description: Append streams one after another - module for Node.js
node-combined-stream can be used to append multiple streams one
after another.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/felixge/node-combined-stream
Package: python3-newt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.20-1ubuntu1
Provides: python3.6-newt
Depends: libnewt0.52 (= 0.52.20-1ubuntu1), python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.4)
Description: NEWT module for Python3
This module allows you to build a text UI for your Python3 scripts
using newt.
Homepage: https://fedorahosted.org/newt/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: libxau-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.8-1
Depends: libxau6 (= 1:1.0.8-1), x11proto-core-dev
Description: X11 authorisation library (development headers)
This package provides the main interface to the X11 authorisation handling,
which controls authorisation for X connections, both client-side and
server-side.
.
This package contains the development headers for the library found in libxau6.
Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXau
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-modules-4.15.0-1021-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 61433
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1021.21
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.25), libuuid1 (>= 2.16)
Description: fdisk partitioning library
The libfdisk library is used for manipulating partition tables. It is
the core of the fdisk, cfdisk, and sfdisk tools.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.0.39
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Suggests: openssl-blacklist
Description: simple debconf wrapper for OpenSSL
This package enables unattended installs of packages that
need to create SSL certificates.
.
It is a simple wrapper for OpenSSL's certificate request utility that
feeds it with the correct user variables.
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: linux-headers-5.4.0-1103-aws
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 12528
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1103.111~18.04.1
Provides: linux-headers, linux-headers-3.0
Depends: linux-aws-5.4-headers-5.4.0-1103, libc6 (>= 2.14), libelf1 (>= 0.142), libssl1.1 (>= 1.1.0)
Description: Linux kernel headers for version 5.4.0 on 64 bit x86 SMP
This package provides kernel header files for version 5.4.0 on
64 bit x86 SMP.
.
This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-5.4.0-1103/debian.README.gz for details.
Package: xsltproc
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libxslt
Version: 1.1.29-5ubuntu0.3
Depends: libc6 (>= 2.4), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25)
Description: XSLT 1.0 command line processor
XSLT is an XML language for defining transformations of XML files from
XML to some other arbitrary format, such as XML, HTML, plain text, etc.
using standard XSLT version 1.0 stylesheets.
.
This package contains a command line tool that facilitates XSLT
transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libjpeg-turbo8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 447
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1.5.2-0ubuntu5.18.04.6
Replaces: libjpeg8 (<< 8c-2ubuntu5)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libjpeg8 (<< 8c-2ubuntu5)
Description: IJG JPEG compliant runtime library.
Runtime library supporting the Independent JPEG Group's standard
for JPEG files.
.
This package contains the shared library which is a drop in
replacement for libjpeg8, which has better performance than
standard libjpeg by use of SIMD and other optimizations.
Homepage: http://libjpeg-turbo.virtualgl.org/
Package: linux-modules-5.4.0-1064-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69603
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1064.67~18.04.1
Config-Version: 5.4.0-1064.67~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpipeline1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 73
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.0-1
Depends: libc6 (>= 2.15)
Description: pipeline manipulation library
This is a C library for setting up and running pipelines of processes,
without needing to involve shell command-line parsing which is often
error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/
Package: libsoup-gnome2.4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsoup2.4
Version: 2.62.1-1ubuntu0.4
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.39.90), libsoup2.4-1 (>= 2.41.90)
Description: HTTP library implementation in C -- GNOME support library
It was originally part of a SOAP (Simple Object Access Protocol)
implementation called Soup, but the SOAP and non-SOAP parts have now been
split into separate packages.
.
libsoup uses the Glib main loop and is designed to work well with GTK+
applications. This enables GNOME applications to access HTTP servers
on the network in a completely asynchronous fashion, very similar to
the GTK+ programming model (a synchronous operation mode is also
supported for those who want it).
.
The GNOME support library is used for features which are important to
GNOME apps, but which require GNOME-specific libraries that non-GNOME
apps may not want to add dependencies on.
.
Features:
* Both asynchronous (GMainLoop and callback-based) and synchronous APIs
* Automatically caches connections
* SSL Support using GnuTLS
* Proxy support, including authentication and SSL tunneling
* Client support for Digest, NTLM, and Basic authentication
* Server support for Digest and Basic authentication
* Basic client-side SOAP and XML-RPC support
.
This package contains the GNOME support shared library.
Homepage: https://wiki.gnome.org/Projects/libsoup
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: preview-latex-style
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: auctex
Version: 11.91-1ubuntu1
Depends: tex-common (>= 6)
Breaks: preview-latex (<= 0.7.3-2)
Description: extraction of elements from LaTeX documents as graphics
The purpose of preview is the extraction of selected elements from a
LaTeX source, like formulas or graphics, into separate pages of a DVI
file. A flexible and convenient interface allows it to specify what
commands and constructs should be extracted. This works with DVI files
postprocessed by either Dvips and Ghostscript or dvipng, but it also
works when using PDFTeX for generating PDF files.
.
Currently, preview.sty is used by preview-latex, the WYSIWYG component of
the AUCTeX editing environment; for generation of previews in LyX; as
part of the operation of the ps4pdf and pst-pdf LaTeX packages; by the
tbook XML system and some other tools.
Homepage: http://www.gnu.org/software/auctex/preview-latex.html
Original-Maintainer: Davide G. M. Salvetti <salve@debian.org>
Package: librsvg2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.40.20-2ubuntu0.2
Depends: librsvg2-2 (= 2.40.20-2ubuntu0.2), librsvg2-common (= 2.40.20-2ubuntu0.2), gir1.2-rsvg-2.0 (= 2.40.20-2ubuntu0.2), libglib2.0-dev (>= 2.24.0), libgdk-pixbuf2.0-dev (>= 2.23.5-2), libcairo2-dev (>= 1.2.0)
Suggests: librsvg2-doc
Description: SAX-based renderer library for SVG files (development)
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package provides the necessary development libraries and include
files to allow you to develop with librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libroken18-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libc6 (>= 2.16)
Description: Heimdal Kerberos - roken support library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the library for roken support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: node-wrappy
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 15
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.2-1
Depends: nodejs
Description: Callback wrapping utility
Returns a wrapper function that returns a wrapped callback
The wrapper function should do some stuff, and return a
presumably different callback function.
This makes sure that own properties are retained, so that
decorations and such are not lost along the way.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/npm/wrappy
Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.69-11
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
/etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
The standard for FSF source packages. This is only useful if you
write your own programs or if you extensively modify other people's
programs.
.
For an extensive library of additional Autoconf macros, install the
`autoconf-archive' package.
.
This version of autoconf is not compatible with scripts meant for
Autoconf 2.13 or earlier.
Original-Maintainer: Ben Pfaff <pfaffben@debian.org>
Homepage: http://www.gnu.org/software/autoconf/
Package: initramfs-tools
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.130ubuntu3.6
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.130ubuntu3.6), linux-base
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), e2fsprogs (<< 1.42.13), elilo (<< 3.12-3.1~), initscripts (<< 2.88dsf-59.3~), isc-dhcp-client (<< 4.3.3-5ubuntu14), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), netplan.io (<< 0.36.2), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186)
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
/etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
/etc/kernel/postinst.d/initramfs-tools f9dcd9b9d4b6aa84c18407f2aeecb096
/etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
Description: generic modular initramfs generator (automation)
This package builds a bootable initramfs for Linux kernel packages. The
initramfs is loaded along with the kernel and is responsible for
mounting the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.37.5), libpangoft2-1.0-0 (>= 1.28.1)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: ghostscript
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 9.26~dfsg+0-0ubuntu0.18.04.18
Provides: postscript-viewer
Depends: libc6 (>= 2.4), libgs9 (= 9.26~dfsg+0-0ubuntu0.18.04.18), debconf | debconf-2.0
Recommends: gsfonts
Suggests: ghostscript-x
Description: interpreter for the PostScript language and for PDF
GPL Ghostscript is used for PostScript/PDF preview and printing.
Usually as a back-end to a program such as ghostview, it can display
PostScript and PDF documents in an X11 environment.
.
Furthermore, it can render PostScript and PDF files as graphics to be
printed on non-PostScript printers. Supported printers include common
dot-matrix, inkjet and laser models.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 567
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.43-1+ubuntu18.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14)
Description: Perl 5 Compatible Regular Expression Library - runtime files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
This package contains the runtime libraries.
Package: libfuse-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 583
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: fuse
Version: 2.9.7-1ubuntu1
Depends: libfuse2 (= 2.9.7-1ubuntu1), libselinux-dev
Suggests: fuse
Description: Filesystem in Userspace (development)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
.
This package contains the development files.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 263
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.3.5-2ubuntu0.18.04.2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: X.509 and CMS support library
KSBA (pronounced Kasbah) is a library to make X.509 certificates as
well as the CMS easily accessible by other applications. Both
specifications are building blocks of S/MIME and TLS.
.
KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
Encoder, Certificate Handling and CMS Handling.
.
This package contains the runtime library files.
Homepage: http://www.gnupg.org/related_software/libksba/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 503
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Replaces: bind9 (<< 1:9.11.2+dfsg-6)
Depends: bind9-host | host, libbind9-160 (= 1:9.11.3+dfsg-1ubuntu1.18), libdns1100 (= 1:9.11.3+dfsg-1ubuntu1.18), libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libisccfg160 (= 1:9.11.3+dfsg-1ubuntu1.18), liblwres160 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4), libirs160 (>= 1:9.10.6+dfsg), libkrb5-3 (>= 1.6.dfsg.2)
Suggests: rblcheck
Breaks: bind9 (<< 1:9.11.2+dfsg-6~)
Description: Clients provided with BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers various client programs related to DNS that are
derived from the BIND source tree.
.
- dig - query the DNS in various ways
- nslookup - the older way to do it
- nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libthai
Version: 0.1.27-2
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
LibThai is a set of Thai language support routines aimed to ease
developers' tasks to incorporate Thai language support in their applications.
It includes important Thai-specific functions e.g. word breaking, input and
output methods as well as basic character and string supports.
.
This package contains the shared libraries needed to run programs that use
the LibThai library.
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Homepage: https://linux.thai.net/projects/libthai
Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-1
Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.4.2), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
A small dumper for media content streamed over the RTMP protocol (like BBC's
iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
flv file, which can be played/transcoded with standard tools.
.
This package contains the shared libraries, header files needed by
programs that want to use librtmp.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://rtmpdump.mplayerhq.hu/
Package: humanity-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 20754
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.6.15
Depends: adwaita-icon-theme, hicolor-icon-theme
Description: Humanity Icon theme
Humanity and Humanity Dark are nice and well polished icon themes for
the GNOME desktop.
Package: php5.6-cgi
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8769
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-cgi, phpapi-20131226
Depends: libmagic1, libpcre3 (>= 2:8.41), mime-support, php5.6-cli, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), php5.6-json, php5.6-opcache, tzdata, ucf, libc6 (>= 2.27), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
/etc/apache2/conf-available/php5.6-cgi.conf 3ac6083f2d927670d3eaa3c798542e72
Description: server-side, HTML-embedded scripting language (CGI binary)
This package provides the /usr/lib/cgi-bin/php CGI interpreter built
for use in Apache 2 with mod_actions, or any other CGI httpd that
supports a similar mechanism. Note that MOST users probably
want the php5.6-fpm package.
.
The following extensions are built in: Core date ereg filter hash libxml
mhash openssl pcntl pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: linux-modules-5.4.0-1094-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69626
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1094.102~18.04.1
Config-Version: 5.4.0-1094.102~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-mime
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.4-1
Depends: nodejs
Description: library for mime-type mapping for Node.js
mime is a Node.js library for mime-type mapping.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/broofa/node-mime
Package: libdevmapper1.02.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 482
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.176-4.1ubuntu3)
Version: 2:1.02.145-4.1ubuntu3
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183)
Recommends: dmsetup (>= 2:1.02.145-4.1ubuntu3)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains the (user-space) shared library for accessing the
device-mapper; it allows usage of the device-mapper through a clean,
consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: python3-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 664
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: zope.interface
Version: 4.3.2-1build2
Provides: python3-zope, python3.6-zope.interface
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3-pkg-resources, python3:any (>= 3.3.2-2~), libc6 (>= 2.4)
Description: Interfaces for Python3
This package provides an implementation of object interfaces for Python.
Interfaces are a mechanism for labeling objects as conforming to a given API
or contract. So, this package can be considered as implementation of the
Design By Contract methodology support in Python.
.
This is the Python 3 version.
Original-Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Homepage: http://pypi.python.org/pypi/zope.interface
Package: perl-modules-5.26
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 18505
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.26.1-6ubuntu0.7
Replaces: libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.24), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.24), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.340000), libfile-spec-perl (<< 3.6700), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.42), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27400.02), liblocale-codes-perl (<< 3.42), liblocale-maketext-perl (<< 1.28), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999806), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20170922.26), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.10), libnet-ping-perl (<< 2.55), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.38), libtest-simple-perl (<< 1.302073), libtest-tester-perl (<< 1.302073), libtest-use-ok-perl (<< 1.302073), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.19), libversion-perl (<< 1:0.9917), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.09)
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libtest-tester-perl, libtest-use-ok-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, perl-modules, podlators-perl
Depends: perl-base (>= 5.26.1-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.26.1-1)
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.24), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.24), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.340000), libfile-spec-perl (<< 3.6700), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.42), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27400.02), liblocale-codes-perl (<< 3.42), liblocale-maketext-perl (<< 1.28), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999806), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20170922.26), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.10), libnet-ping-perl (<< 2.55), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.38), libtest-simple-perl (<< 1.302073), libtest-tester-perl (<< 1.302073), libtest-use-ok-perl (<< 1.302073), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.19), libversion-perl (<< 1:0.9917), maildirsync (<< 1.2-2.1), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.26.1~), podlators-perl (<< 4.09), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3), perl-modules (<< 5.22.0~)
Description: Core Perl modules
Architecture independent Perl modules. These modules are part of Perl and
required if the `perl' package is installed.
.
Note that this package only exists to save archive space and should be
considered an internal implementation detail of the `perl' package.
Other packages should not depend on `perl-modules-5.26' directly, they
should use `perl' (which depends on `perl-modules-5.26') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: netplan.io
Status: install ok installed
Priority: important
Section: net
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.40.1~18.04.4
Replaces: nplan (<< 0.34~)
Provides: nplan
Depends: libc6 (>= 2.27), libglib2.0-0 (>= 2.16.0), libuuid1 (>= 2.16), libyaml-0-2, iproute2, python3, python3-yaml, python3-netifaces, systemd (>= 235-3ubuntu3)
Suggests: network-manager | wpasupplicant
Breaks: network-manager (<< 1.2.2-0ubuntu4~), nplan (<< 0.34~)
Conflicts: netplan
Description: YAML network configuration abstraction for various backends
netplan reads YAML network configuration files which are written
by administrators, installers, cloud image instantiations, or other OS
deployments. During early boot it then generates backend specific
configuration files in /run to hand off control of devices to a particular
networking daemon.
.
Currently supported backends are networkd and NetworkManager.
Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.176ubuntu2.3)
Version: 4:7.4.0-1ubuntu2.3
Provides: c-compiler
Depends: cpp (>= 4:7.4.0-1ubuntu2.3), gcc-7 (>= 7.4.0-1~)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
.
This is a dependency package providing the default GNU C compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: gpg-wks-server
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Depends: gpg (= 2.2.4-1ubuntu1.6), gpg-agent (= 2.2.4-1ubuntu1.6), libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.21)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Description: GNU privacy guard - Web Key Service server
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package provides the GnuPG server for the Web Key Service
protocol.
.
A Web Key Service is a service that allows users to upload keys per
mail to be verified over https as described in
https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
.
For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 346
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.18-1
Depends: libc6 (>= 2.17), libsigsegv2 (>= 2.9)
Suggests: m4-doc
Description: macro processing language
GNU `m4' is an implementation of the traditional UNIX macro
processor. It is mostly SVR4 compatible, although it has some
extensions (for example, handling more than 9 positional parameters to
macros). `m4' also has builtin functions for including files, running
shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for
generating `configure' scripts, but not for running them.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/m4/
Package: linux-aws-5.4-headers-5.4.0-1103
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71153
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1103.111~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1103/debian.README.gz for details
Package: command-not-found
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 35
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Version: 18.04.5
Depends: python3-commandnotfound (= 18.04.5)
Suggests: snapd
Conffiles:
/etc/apt/apt.conf.d/50command-not-found 9bf399a111915919e5c6952f64a6f5eb
/etc/zsh_command_not_found 373832ecdbbde52cf4610789e940f10f
Description: Suggest installation of packages in interactive bash sessions
This package will install a handler for command_not_found that looks up
programs not currently installed but available from the repositories.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>
Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.29
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
This package creates the SGML infrastructure directories and provides
SGML catalog file support in compliance with the current Debian SGML
Policy draft:
.
* infrastructure directories:
- /etc/sgml
- /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
- /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
.
* update-catalog(8): tool for maintaining the root SGML catalog
file and the package SGML catalog files in the '/etc/sgml' directory.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: hdparm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 9.54+ds-1
Depends: libc6 (>= 2.14), lsb-base
Recommends: powermgmt-base
Suggests: apmd
Conffiles:
/etc/apm/event.d/20hdparm 69c0a826b29c8f40b7ca5e56e53d7f83
/etc/hdparm.conf 4af0e8f7db24f9a99d49070165c17cde
Description: tune hard disk parameters for high performance
Get/set device parameters for Linux SATA/IDE drives.
Provides a command line interface to various kernel interfaces supported by
the Linux SATA/PATA/SAS "libata" subsystem and the older IDE driver subsystem.
Many newer (2008 and later) USB drive enclosures now also support "SAT"
(SCSI-ATA Command Translation) and therefore may also work with hdparm.
Original-Maintainer: Alexandre Mestiashvili <alex@biotec.tu-dresden.de>
Homepage: http://sourceforge.net/projects/hdparm/
Package: node-block-stream
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.9-1ubuntu1
Depends: nodejs, node-inherits (>= 2)
Description: Stream of fixed-size blocks, with zero-padding when necessary
node-block-stream is a Node.js module providing a stream-like object that
reads or writes data as a stream of blocks.
A typical use of node-block-stream is processing tar archives.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/isaacs/block-stream
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libicu-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 42758
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 65.1-1+ubuntu18.04.1+deb.sury.org+1
Replaces: icu-devtools (<< 65.1-1~)
Depends: libicu65 (= 65.1-1+ubuntu18.04.1+deb.sury.org+1), icu-devtools (>= 65.1-1+ubuntu18.04.1+deb.sury.org+1), libc6-dev | libc-dev
Suggests: icu-doc
Breaks: icu-devtools (<< 65.1-1~)
Description: Development files for International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains the development
files for ICU.
Homepage: http://www.icu-project.org
Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 517
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 39.0.1-2ubuntu0.1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
The pkg_resources module provides an API for Python libraries to
access their resource files, and for extensible applications and
frameworks to automatically discover plugins. It also provides
runtime support for using C extensions that are inside zipfile-format
eggs, support for merging packages that have separately-distributed
modules or subpackages, and APIs for managing Python's current
"working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: ubuntu-release-upgrader-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:18.04.25
Replaces: update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Depends: python3:any (>= 3.2~), python3-distupgrade (= 1:18.04.25)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: software-properties (<< 0.9.27), update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Conffiles:
/etc/update-manager/meta-release 25ba16c3215bff43f0272d3d93103f15
/etc/update-manager/release-upgrades df41b4619e6054b4558a75e316923611
/etc/update-motd.d/91-release-upgrade 51540d8467fcf35f65e2873454746e54
Description: manage release upgrades
This is the core of the Ubuntu Release Upgrader
Package: libgdbm5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.14.1-6
Depends: libc6 (>= 2.14)
Suggests: gdbm-l10n (= 1.14.1-6)
Description: GNU dbm database routines (runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
Original-Maintainer: Dmitry Bogatov <KAction@gnu.org>
Homepage: https://gnu.org/software/gdbm
Package: bcache-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.8-2build1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libuuid1 (>= 2.16)
Recommends: initramfs-tools | linux-initramfs-tool
Description: bcache userspace tools
Bcache allows the use of SSDs to cache other block devices.
.
Documentation for the run-time interface is included in the kernel tree; in
Documentation/bcache.txt.
.
This package includes udev rules, initramfs support, and the utilities to
create a new bcache as well as inspect existing bcache partitions.
Original-Maintainer: David Mohr <david@mcbf.net>
Homepage: http://bcache.evilpiepirate.org/
Package: libgeoip1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: geoip
Version: 1.6.12-1
Depends: libc6 (>= 2.4)
Recommends: geoip-database
Suggests: geoip-bin
Description: non-DNS IP-to-country resolver library
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the shared library.
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: https://www.maxmind.com/
Package: linux-image-5.4.0-1058-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9323
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1058.61~18.04.3
Config-Version: 5.4.0-1058.61~18.04.3
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1058-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1058-aws
Conflicts: linux-image-unsigned-5.4.0-1058-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.4.0-1048-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9243
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1048.50~18.04.1
Config-Version: 5.4.0-1048.50~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1048-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1048-aws
Conflicts: linux-image-unsigned-5.4.0-1048-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: cloud-initramfs-dyn-netconf
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 31
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.40ubuntu1
Depends: initramfs-tools
Description: write a network interface file in /run for BOOTIF
This package provides an initramfs module that will write a simple
network interfaces formated file to /run/network/interfaces with
entries for any devices that were configured during initramfs.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: python-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 545
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 39.0.1-2ubuntu0.1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-setuptools
Description: Package Discovery and Resource Access using pkg_resources
The pkg_resources module provides an API for Python libraries to
access their resource files, and for extensible applications and
frameworks to automatically discover plugins. It also provides
runtime support for using C extensions that are inside zipfile-format
eggs, support for merging packages that have separately-distributed
modules or subpackages, and APIs for managing Python's current
"working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-gi
Status: install ok installed
Priority: important
Section: python
Installed-Size: 630
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pygobject
Version: 3.26.1-2
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libffi6 (>= 3.0.4), libgirepository-1.0-1 (>= 1.44.0), libglib2.0-0 (>= 2.41.1), gir1.2-glib-2.0 (>= 1.39.0)
Description: Python 3 bindings for gobject-introspection libraries
GObject is an abstraction layer that allows programming with an object
paradigm that is compatible with many languages. It is a part of Glib,
the core library used to build GTK+ and GNOME.
.
This package contains the Python 3 binding generator for libraries that
support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
package. With these packages, the libraries can be used from Python 3.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/PyGObject
Package: node-rimraf
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.6.2-1
Depends: nodejs, node-glob
Recommends: node-graceful-fs (>= 2)
Description: Deep deletion (like rm -rf) module for Node.js
node-rimraf is a Node.js module that provides asynchronous deep-deletion
of files and directories.
.
The `rimraf` executable is a faster alternative to the `rm -rf` shell
command.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/rimraf
Package: libnet-dns-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 928
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.10-2
Replaces: libnet-dns-sec-perl (<< 1.01)
Depends: perl, libdigest-hmac-perl, libio-socket-inet6-perl, libnet-ip-perl
Breaks: fpdns (<< 20130404~), libnet-dns-sec-perl (<< 1.01), spamassassin (<< 3.4.0-2~)
Description: Perform DNS queries from a Perl script
Net::DNS is a DNS resolver implemented in Perl supporting IPv6.
It allows the programmer to perform nearly any type of DNS query
from a Perl script.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://www.net-dns.org/
Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.2-20
Replaces: fsresize, parted1.6
Depends: libc6 (>= 2.11), libparted2 (= 3.2-20), libreadline7 (>= 6.0), libtinfo5 (>= 6)
Suggests: parted-doc
Conflicts: fsresize, parted1.6
Description: disk partition manipulator
GNU Parted is a program that allows you to create, destroy, resize,
move, and copy disk partitions. This is useful for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
.
This package contains the binary and manual page. Further
documentation is available in parted-doc.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
partitioning formats, as well as a "loop" (raw disk) type which
allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
file systems. Parted also has the ability to create and modify file
systems of some of these types, but using it to perform file system
operations is now deprecated.
.
The nature of this software means that any bugs could cause massive
data loss. While there are no such bugs known at the moment, they
could exist, so please back up all important files before running
it, and do so at your own risk.
Original-Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Homepage: http://www.gnu.org/software/parted
Package: lsb-release
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20170808ubuntu1
Depends: python3:any (>= 3.4~), distro-info-data
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
The lsb-release command is a simple tool to help identify the Linux
distribution being used and its compliance with the Linux Standard Base.
LSB conformance will not be reported unless the required metapackages are
installed.
.
While it is intended for use by LSB packages, this command may also
be useful for programmatically distinguishing between a pure Debian
installation and derived distributions.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.28-1ubuntu1
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.25), libselinux1 (>= 2.1.13)
Description: GNU core utilities
This package contains the basic file, shell and text manipulation
utilities which are expected to exist on every operating system.
.
Specifically, this package includes:
arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
csplit cut date dd df dir dircolors dirname du echo env expand expr
factor false flock fmt fold groups head hostid id install join link ln
logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
tail tee test timeout touch tr true truncate tsort tty uname unexpand
uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>
Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.10-2.1
Depends: libc6 (>= 2.14)
Description: classic UNIX line editor
ed is a line-oriented text editor. It is used to
create, display, modify and otherwise manipulate text
files.
.
red is a restricted ed: it can only edit files in the
current directory and cannot execute shell commands.
Original-Maintainer: Martin Zobel-Helas <zobel@debian.org>
Homepage: http://www.gnu.org/software/ed/
Package: lshw
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 02.18-0.1ubuntu6.18.04.1
Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Recommends: pciutils, usbutils
Description: information about hardware configuration
A small tool to provide detailed information on the hardware
configuration of the machine. It can report exact memory
configuration, firmware version, mainboard configuration, CPU version
and speed, cache configuration, bus speed, etc. on DMI-capable x86
systems, on some PowerPC machines (PowerMac G4 is known to work) and AMD64.
.
Information can be output in plain text, HTML or XML.
Original-Maintainer: Ghe Rivero <ghe@debian.org>
Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Depends: dirmngr (= 2.2.4-1ubuntu1.6), gpg (= 2.2.4-1ubuntu1.6), gpg-agent (= 2.2.4-1ubuntu1.6), libassuan0 (>= 2.0.1), libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.21)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Description: GNU privacy guard - Web Key Service client
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package provides the GnuPG client for the Web Key Service
protocol.
.
A Web Key Service is a service that allows users to upload keys per
mail to be verified over https as described in
https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
.
For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libopenexr22
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2994
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openexr
Version: 2.2.0-11.1ubuntu1.9
Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libilmbase12 (>= 2.2.0), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.0)
Description: runtime files for the OpenEXR image library
OpenEXR is a high dynamic-range (HDR) image file format developed by
Industrial Light & Magic for use in computer imaging applications.
.
OpenEXR's features include:
* Higher dynamic range and colour precision than existing 8- and
10-bit image file formats.
* Support for the "half" 16-bit floating-point pixel format.
* Multiple lossless image compression algorithms. Some of the
included codecs can achieve 2:1 lossless compression ratios on
images with film grain.
* Extensibility. New compression codecs and image types can easily
be added by extending the C++ classes included in the OpenEXR
software distribution. New image attributes (strings, vectors,
integers, etc.) can be added to OpenEXR image headers without
affecting backward compatibility with existing OpenEXR
applications.
.
This package contains the following shared library:
* IlmImf - a library that reads and writes OpenEXR images.
Homepage: http://www.openexr.com
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Package: file
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.32-2ubuntu0.4
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.32-2ubuntu0.4)
Description: Recognize the type of data in a file using "magic" numbers
The file command is "a file type guesser", a command-line tool that
tells you in words what kind of data a file contains.
.
This package contains the file program itself.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: python3-apport
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 573
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.9-0ubuntu7.29
Depends: python3:any (>= 3.3.2-2~), python3-apt (>= 0.7.9), python3-httplib2, python3-problem-report (>= 0.94), python3-requests-unixsocket, lsb-release
Recommends: apport
Suggests: python3-launchpadlib
Description: Python 3 library for Apport crash report handling
This Python package provides high-level functions for creating and
handling apport crash reports:
.
* Query available and new reports.
* Add OS, packaging, and process runtime information to a report.
* Various frontend utility functions.
* Python hook to generate crash reports when Python scripts fail.
Homepage: https://wiki.ubuntu.com/Apport
Package: at
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.20-3.1ubuntu2
Depends: libpam-runtime (>= 1.0.1-11), lsb-base (>= 3.2-14), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9)
Suggests: default-mta | mail-transport-agent
Conffiles:
/etc/at.deny 8cb7e7632119dc26115436938efd2522
/etc/init.d/atd ce2de503acc3de02f544571e89d4d717
/etc/pam.d/atd ccdb71bdfe8764a2feb0f6e4ebbd378d
Description: Delayed job execution and batch processing
At and batch read shell commands from standard input
storing them as a job to be scheduled for execution in the
future.
.
Use
at to run the job at a specified time
batch to run the job when system load levels permit
Homepage: http://blog.calhariz.com
Original-Maintainer: Jose M Calhariz <jose@calhariz.com>
Package: texlive-font-utils
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 4142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-extra
Version: 2017.20180305-2
Depends: tex-common (>= 6), texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437)
Recommends: ghostscript, ps2eps
Suggests: psutils, t1utils
Breaks: texlive-base (<< 2017.20170628)
Description: TeX Live: Graphics and font utilities
Programs for conversion between font formats, testing fonts, virtual
fonts, .gf and .pk manipulation, mft, fontinst, etc. Manipulating OpenType,
TrueType, Type 1,and for manipulation of PostScript and other image formats.
.
This package includes the following CTAN packages:
.
accfonts -- Utilities to derive new fonts from existing ones
.
afm2pl -- AFM font metrics to TeX pl converter.
.
dosepsbin -- Deal with DOS binary EPS files
.
epstopdf -- Convert EPS to PDF using Ghostscript
.
fontware -- Tools for virtual font metrics
.
metatype1 -- Generate Type 1 fonts from MetaPost
.
ps2pk -- Generate a PK font from an Adobe Type 1 font
.
pstools -- Produce Encapsulated PostScript from PostScript
.
dvipsconfig -- Collection of dvips PostScript headers
.
fontinst -- Help with installing fonts for TeX and LaTeX
.
fontools -- Tools to simplify using fonts (especially TT/OTF ones)
.
mf2pt1 -- Produce PostScript Type 1 fonts from Metafont source
.
ttfutils -- convert TrueType to TFM and PK fonts
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.7-1
Replaces: libfftw3-3 (<< 3.3.3-1)
Depends: libc6 (>= 2.14), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Breaks: libfftw3-3 (<< 3.3.3-1)
Description: Library for computing Fast Fourier Transforms - Double precision
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the shared library
for double precision transforms.
.
To get the static library and the header files, you need to install
libfftw3-dev. For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: linux-image-5.4.0-1093-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10316
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1093.102~18.04.2
Config-Version: 5.4.0-1093.102~18.04.2
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1093-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1093-aws
Conflicts: linux-image-unsigned-5.4.0-1093-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1093.102~18.04.2)
Package: linux-modules-4.15.0-1065-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 60724
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws
Version: 4.15.0-1065.69
Config-Version: 4.15.0-1065.69
Description: Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:4.1.4+dfsg-1build1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr6 (>= 3.1.3), libreadline7 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
`awk', a program that you can use to select particular records in a
file and perform operations upon them.
.
Gawk is the GNU Project's implementation of the AWK programming language.
It conforms to the definition of the language in the POSIX 1003.2 Command
Language And Utilities Standard. This version in turn is based on the
description in The AWK Programming Language, by Aho, Kernighan, and
Weinberger, with the additional features defined in the System V Release
4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/
Original-Maintainer: Adrian Bunk <bunk@debian.org>
Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 215
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.22-2ubuntu1
Depends: libfakeroot (>= 1.22-2ubuntu1), libc6 (>= 2.15)
Description: tool for simulating superuser privileges
fakeroot provides a fake "root environment" by means of LD_PRELOAD and
SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
stat(), and other file-manipulation functions, so that unprivileged
users can (for instance) populate .deb archives with root-owned files;
various build tools use fakeroot for this by default.
.
This package contains fakeroot command and the daemon that remembers
fake ownership/permissions of files manipulated by fakeroot
processes.
Original-Maintainer: Clint Adams <clint@debian.org>
Package: linux-modules-5.4.0-1096-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69649
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1096.104~18.04.1
Config-Version: 5.4.0-1096.104~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.4.0-1101-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 69667
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1101.109~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 716
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:007-4build1
Depends: libc6 (>= 2.14), libusb-1.0-0 (>= 2:1.0.16), zlib1g (>= 1:1.1.4)
Suggests: wget (>= 1.8.1-6) | lynx-cur
Description: Linux USB utilities
This package contains the lsusb utility for inspecting the devices
connected to the USB bus. It shows a graphical representation of the
devices that are currently plugged in, showing the topology of the
USB bus. It also displays information on each individual device on
the bus.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: https://github.com/gregkh/usbutils
Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2097
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.15.0-2ubuntu1.1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.27), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
/etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
/etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
/etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
/etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2
/etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
/etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
/etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312
/etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
/etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
/etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
/etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431
Description: networking and traffic control tools
The iproute2 suite is a collection of utilities for networking and
traffic control.
.
These tools communicate with the Linux kernel via the (rt)netlink
interface, providing advanced features not available through the
legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Package: uidmap
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.5-1ubuntu2.5
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: programs to help use subuids
These programs help unprivileged users to create uid and gid mappings in
user namespaces.
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: libgtk-3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8932
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gtk+3.0
Version: 3.22.30-1ubuntu4
Provides: gtk3-binver-3.0.0
Depends: libgtk-3-common (>= 3.22.30-1ubuntu4), libatk-bridge2.0-0 (>= 2.5.3), libatk1.0-0 (>= 2.15.1), libc6 (>= 2.14), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.14.0), libcolord2 (>= 0.1.10), libcups2 (>= 1.6.2), libepoxy0 (>= 1.0), libfontconfig1 (>= 2.12), libgdk-pixbuf2.0-0 (>= 2.30.1), libglib2.0-0 (>= 2.55.2), libjson-glib-1.0-0 (>= 0.12.0), libpango-1.0-0 (>= 1.40.5), libpangocairo-1.0-0 (>= 1.40.5), libpangoft2-1.0-0 (>= 1.40.5), librest-0.7-0 (>= 0.7), libwayland-client0 (>= 1.9.91), libwayland-cursor0 (>= 1.9.91), libwayland-egl1 (>= 1.15.0), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.3-1), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6 (>= 2:1.2.99.4), libxinerama1, libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.5.0), hicolor-icon-theme, adwaita-icon-theme, shared-mime-info
Recommends: libgtk-3-bin
Suggests: librsvg2-common, gvfs
Conffiles:
/etc/gtk-3.0/settings.ini fe7ec64964a6ebd46785ddfffc9a9ae3
Description: GTK+ graphical user interface library
GTK+ is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK+ is suitable
for projects ranging from small one-off tools to complete application
suites.
.
This package contains the shared libraries.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libbsd0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.8.7-1ubuntu0.1
Depends: libc6 (>= 2.25)
Description: utility functions from BSD systems - shared library
This library provides some C functions such as strlcpy() that are commonly
available on BSD systems but not on others like GNU systems.
.
For a detailed list of the provided functions, please see the libbsd-dev
package description.
Homepage: https://libbsd.freedesktop.org/
Original-Maintainer: Guillem Jover <guillem@debian.org>
Package: node-read-package-json
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2.4-1
Depends: nodejs, node-glob (>= 3.2.1), node-lru-cache (>= 2), node-normalize-package-data
Recommends: node-graceful-fs (>= 2)
Description: Read package.json for npm module for Node.js
This module reads package.json files with semantics, defaults, and
validation for npm consumption.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/read-package-json
Package: linux-aws-5.4-headers-5.4.0-1089
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71122
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1089.97~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1089/debian.README.gz for details
Package: php5.6-mcrypt
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 80
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-mcrypt
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14), libmcrypt4
Description: libmcrypt module for PHP
This package provides the libmcrypt module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: texlive-binaries
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 35102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Replaces: gregorio (<= 2.3-1), jmpost, luatex (<< 2014), m-tx (<< 0.61.ctan20151217-2), mendexk, musixtex (<< 1:1.20.ctan20151216-3), pmx (<< 2.7.0.ctan20150301-3), ptex-bin, tex4ht (<< 20160814), texlive-base (<< 2010), texlive-lang-japanese (<< 2017), texlive-metapost (<< 2010)
Provides: jmpost, luatex, makejvf, mendexk, texlive-base-bin
Depends: libptexenc1 (>= 2017.20170613.44572-8ubuntu0.2), libptexenc1 (<< 2017.20170613.44572-8ubuntu0.2.1~), libkpathsea6 (>= 2017.20170613.44572-8ubuntu0.2), libkpathsea6 (<< 2017.20170613.44572-8ubuntu0.2.1~), libsynctex1 (>= 2017.20170613.44572-8ubuntu0.2), libsynctex1 (<< 2017.20170613.44572-8ubuntu0.2.1~), libtexlua52 (>= 2017.20170613.44572-8ubuntu0.2), libtexlua52 (<< 2017.20170613.44572-8ubuntu0.2.1~), libtexluajit2 (>= 2017.20170613.44572-8ubuntu0.2), libtexluajit2 (<< 2017.20170613.44572-8ubuntu0.2.1~), t1utils, libc6 (>= 2.15), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.3.9), libgcc1 (>= 1:4.0), libgmp10, libgraphite2-3 (>= 1.2.2), libgs9 (>= 8.61.dfsg.1), libharfbuzz-icu0 (>= 0.9.18-3), libharfbuzz0b (>= 1.4.1), libicu60 (>= 60.1-1~), libmpfr6 (>= 3.1.3), libpaper1, libpixman-1-0 (>= 0.10.0), libpng16-16 (>= 1.6.2-1), libpoppler73 (>= 0.62.0), libpotrace0, libstdc++6 (>= 5.2), libx11-6 (>= 2:1.2.99.901), libxaw7, libxi6 (>= 2:1.2.99.4), libxmu6, libxpm4, libxt6, libzzip-0-13 (>= 0.13.56), zlib1g (>= 1:1.1.4), tex-common (>= 6), perl, dpkg (>= 1.15.4) | install-info
Recommends: texlive-base
Breaks: context (<< 2016), gregorio (<= 2.3-1), jtex-bin, luatex (<< 2014), m-tx (<< 0.61.ctan20151217-2), multex-bin, musixtex (<< 1:1.20.ctan20151216-3), pmx (<< 2.7.0.ctan20150301-3), tex-common (<< 6), tex4ht (<< 20160814), texlive-base (<< 2016), texlive-htmlxml (<< 2016.20160829), texlive-lang-japanese (<< 2017), texlive-plain-generic (<< 2017.20170809)
Conflicts: jmpost, makejvf, mendexk
Description: Binaries for TeX Live
This package contains all the binaries of TeX Live packages.
.
Note that this package alone has hardly any functionality. Rather,
choose the texlive-* packages you want to use, e.g.
texlive-latex-recommended or context
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: linux-modules-5.4.0-1060-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69561
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1060.63~18.04.1
Config-Version: 5.4.0-1060.63~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-abbrev
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 14
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.9-1
Depends: nodejs
Description: Get unique abbreviations for a set of strings - Node.js module
Given a set of strings, this module computes a list of distinct abbreviations.
This is handy for command-line scripts, or other cases where
one wants to be able to accept shorthands.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/abbrev-js
Package: node-gyp
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.6.2-1ubuntu1
Depends: nodejs, nodejs-dev, gyp (>= 0.1+20150913git1f374df9), node-fstream, node-glob, node-graceful-fs (>= 2), node-minimatch, node-mkdirp, node-nopt (>= 2), node-npmlog, node-osenv, node-request, node-rimraf, node-semver (>= 2.1), node-tar, node-which
Recommends: build-essential
Description: Native addon build tool for Node.js
node-gyp is a cross-platform command-line tool written in Node.js
for compiling native addon modules for Node.js.
.
It features :
* Easy to use, consistent interface
* Same commands to build a module on every platform
* Support of multiple target versions of Node.js
.
node-gyp replaces node-waf program which was deprecated in Node.js 0.8
and removed since Node.js 0.10.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/nodejs/node-gyp
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.44.1-1ubuntu1.4
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcom-err2 (>= 1.42~WIP-2011-10-05-1), libext2fs2 (= 1.44.1-1ubuntu1.4), libss2 (>= 1.34-1), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
/etc/mke2fs.conf 72b349d890a9b5cca06c7804cd0c8d1d
Description: ext2/ext3/ext4 file system utilities
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package contains programs for creating, checking, and maintaining
ext2/3/4-based file systems. It also includes the "badblocks" program,
which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 868
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.29b-2ubuntu0.4
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
/etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
Tar is a program for packaging a set of files as a single archive in tar
format. The function it performs is conceptually similar to cpio, and to
things like PKZIP in the DOS world. It is heavily used by the Debian package
management system, and is useful for performing system backups and exchanging
sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>
Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.4
Depends: libc6 (>= 2.14)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.16), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16)
Description: MIT Kerberos runtime libraries - Support library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains an internal runtime support library used by other
Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: open-iscsi
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1380
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.874-5ubuntu2.1
Depends: udev, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.14), libisns0 (>= 0.96-4~), libmount1 (>= 2.24.2), lsb-base (>= 3.0-6)
Pre-Depends: debconf | debconf-2.0
Recommends: busybox-initramfs
Conffiles:
/etc/default/open-iscsi 5744c65409cbdea2bcf5b99dbff89e96
/etc/init.d/iscsid f45c4e0127bafee72454ce97a7ce2f6c
/etc/init.d/open-iscsi b0cdf36373e443ad1e4171959dc8046f
/etc/iscsi/iscsid.conf 7e983a038bacd8e59d33d04a7e3f7a1e
Description: iSCSI initiator tools
Open-iSCSI is a high-performance, transport independent, multi-platform
implementation of the RFC3720 Internet Small Computer Systems Interface
(iSCSI).
.
Open-iSCSI is partitioned into user and kernel parts, where the kernel
portion implements the iSCSI data path (i.e. iSCSI Read and iSCSI Write).
The userspace contains the entire control plane:
* Configuration Manager;
* iSCSI Discovery;
* Login and Logout processing;
* Connection level error processing;
* Nop-In and Nop-Out handling;
* (in the future) Text processing, iSNS, SLP, Radius, etc.
.
This package includes a daemon, iscsid, and a management utility,
iscsiadm.
Homepage: http://www.open-iscsi.com/
Original-Maintainer: Debian iSCSI Maintainers <pkg-iscsi-maintainers@lists.alioth.debian.org>
Package: libprocps6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3ubuntu1.1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
The libprocps library is a way of accessing information out of the /proc
filesystem.
.
This package contains the shared libraries necessary to run programs
compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libhx509-5-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 349
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcom-err2 (>= 1.34), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.7~git20150920), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - X509 support library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the x509 supportlibrary.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: libbz2-1.0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1ubuntu0.2
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
This package contains libbzip2 which is used by the bzip2 compressor.
.
bzip2 is a freely available, patent free, high-quality data compressor.
It typically compresses files to within 10% to 15% of the best available
techniques, whilst being around twice as fast at compression and six
times faster at decompression.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: mdadm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.1~rc1-3~ubuntu18.04.1
Depends: libc6 (>= 2.27), udev, debconf (>= 0.5) | debconf-2.0, lsb-base, debconf
Recommends: kmod | module-init-tools
Suggests: default-mta | mail-transport-agent, dracut-core
Conffiles:
/etc/cron.d/mdadm e2384a232bdaaf9ec65173d5282e40fe
/etc/cron.daily/mdadm 04839987aec89ae101d5e1f47abd2be4
/etc/init.d/mdadm efc6265fbfed68898f122344143747f9
/etc/init.d/mdadm-waitidle 3fbdb2093dd0d373a923ad9983e3f75f
/etc/logcheck/ignore.d.server/mdadm 5eeaf5c5c7dc0291a986e43004dfd495
/etc/logcheck/violations.d/mdadm efd87cec251921ce0642171eae5f3b73
/etc/modprobe.d/mdadm.conf d3be82c0f275d6c25b04d388baf9e836
Description: tool to administer Linux MD arrays (software RAID)
The mdadm utility can be used to create, manage, and monitor MD
(multi-disk) arrays for software RAID or multipath I/O.
.
This package automatically configures mdadm to assemble arrays during the
system startup process. If not needed, this functionality can be disabled.
Homepage: http://neil.brown.name/blog/mdadm
Original-Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 322
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nspr
Version: 2:4.18-1ubuntu1
Depends: libc6 (>= 2.17)
Conflicts: libnspr4-0d (<< 2:4.9-2~)
Description: NetScape Portable Runtime Library
This library provides platform independent non-GUI operating system
facilities including:
* threads,
* thread synchronisation,
* normal file I/O and network I/O,
* interval timing and calendar time,
* basic memory management (malloc and free),
* shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <pkg-mozilla-maintainers@lists.alioth.debian.org>
Package: ucf
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.0038
Depends: debconf (>= 1.5.19), coreutils (>= 5.91), sensible-utils
Conffiles:
/etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
Debian policy mandates that user changes to configuration files must be
preserved during package upgrades. The easy way to achieve this behavior
is to make the configuration file a 'conffile', in which case dpkg
handles the file specially during upgrades, prompting the user as
needed.
.
This is appropriate only if it is possible to distribute a default
version that will work for most installations, although some system
administrators may choose to modify it. This implies that the
default version will be part of the package distribution, and must
not be modified by the maintainer scripts during installation (or at
any other time).
.
This script attempts to provide conffile-like handling for files that
may not be labelled conffiles, and are not shipped in a Debian package,
but handled by the postinst instead. This script allows one to
maintain files in /etc, preserving user changes and in general
offering the same facilities while upgrading that dpkg normally
provides for 'conffiles'.
.
Additionally, this script provides facilities for transitioning a
file that had not been provided with conffile-like protection to come
under this schema, and attempts to minimize questions asked at
installation time. Indeed, the transitioning facility is better than the
one offered by dpkg while transitioning a file from a non-conffile to
conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>
Package: linux-image-5.4.0-1045-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9228
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1045.47~18.04.1
Config-Version: 5.4.0-1045.47~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1045-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1045-aws
Conflicts: linux-image-unsigned-5.4.0-1045-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-netifaces
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netifaces
Version: 0.10.4-0.1build4
Depends: libc6 (>= 2.4), python3 (<< 3.7), python3 (>= 3.6~)
Description: portable network interface information - Python 3.x
netifaces provides a (hopefully portable-ish) way for Python programmers to
get access to a list of the network interfaces on the local machine, and to
obtain the addresses of those network interfaces.
.
This package contains the module for Python 3.x.
Homepage: http://alastairs-place.net/projects/netifaces/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: pastebinit
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.5-2
Replaces: bikeshed (<< 1.21)
Depends: python3
Breaks: bikeshed (<< 1.21)
Description: command-line pastebin client
pastebinit is a command-line tool to send data to a "pastebin", a web site
which allows its users to upload snippets of text for public viewing.
Original-Maintainer: Rolf Leggewie <foss@rolf.leggewie.biz>
Homepage: http://launchpad.net/pastebinit/
Package: node-glob
Status: install ok installed
Priority: extra
Section: devel
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 7.1.2-4
Depends: nodejs, node-minimatch (>= 3.0.4), node-inherits (>= 2), node-once (>= 1.3.0), node-fs.realpath (>= 1.0.0), node-inflight (>= 1.0.4), node-path-is-absolute (>= 1.0.0)
Description: glob functionality for Node.js
node-glob is a glob implementation for Node.js
.
It features brace expansion, extended glob matching, globstar matching,
and can be invoked synchronously as well as asynchronously.
It uses minimatch for pattern matching.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/node-glob
Package: libgirepository-1.0-1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.56.1-1
Depends: libc6 (>= 2.14), libffi6 (>= 3.0.4), libglib2.0-0 (>= 2.56.1)
Description: Library for handling GObject introspection data (runtime library)
GObject Introspection is a project for providing machine readable
introspection data of the API of C libraries. This introspection
data can be used in several different use cases, for example
automatic code generation for bindings, API verification and documentation
generation.
.
GObject Introspection contains tools to generate and handle the
introspection data.
.
This package contains a C library for handling the introspection data.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection
Package: linux-image-5.4.0-1081-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10299
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1081.88~18.04.1
Config-Version: 5.4.0-1081.88~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1081-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1081-aws
Conflicts: linux-image-unsigned-5.4.0-1081-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1081.88~18.04.1)
Package: libglib2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8918
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.56.4-0ubuntu0.18.04.9
Replaces: libglib2.0-0-dbg (<< 2.51.4-1~)
Depends: libglib2.0-0 (= 2.56.4-0ubuntu0.18.04.9), libglib2.0-bin (= 2.56.4-0ubuntu0.18.04.9), libglib2.0-dev-bin (= 2.56.4-0ubuntu0.18.04.9), libpcre3-dev (>= 1:8.31), pkg-config, zlib1g-dev
Suggests: libglib2.0-doc
Breaks: libglib2.0-0-dbg (<< 2.51.4-1~)
Description: Development files for the GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package is needed to compile programs against libglib2.0-0,
as only it includes the header files and static libraries (optionally)
needed for compiling.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.40.20-2ubuntu0.2
Depends: libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), librsvg2-2 (= 2.40.20-2ubuntu0.2)
Description: SAX-based renderer library for SVG files (extra runtime)
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package includes the gdk-pixbuf loader allowing
to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 24-1ubuntu3
Depends: libc6 (>= 2.17)
Description: libkmod shared library
This library provides an API for insertion, removal, configuration and
listing of kernel modules.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 509
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.060-3~ubuntu18.04.1
Depends: libnet-ssleay-perl (>= 1.84-1ubuntu0.1), libssl1.1 (>= 1.1.1), netbase, perl
Recommends: libnet-libidn-perl | libnet-idn-encode-perl | liburi-perl, perl (>= 5.15.6) | libsocket-perl | libsocket6-perl, perl (>= 5.19.8) | libio-socket-ip-perl (>= 0.20) | libio-socket-inet6-perl
Suggests: ca-certificates
Breaks: libwww-perl (<= 6.31-1ubuntu0.1~)
Description: Perl module implementing object oriented interface to SSL sockets
This module is a true drop-in replacement for IO::Socket::INET that
uses SSL to encrypt data before it is transferred to a remote server
or client. IO::Socket::SSL supports all the extra features that one
needs to write a full-featured SSL client or server application:
multiple SSL contexts, cipher selection, certificate verification, and
SSL version selection. As an extra bonus, it works perfectly with
mod_perl.
.
IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
libio-socket-inet6-perl is installed.
Homepage: https://metacpan.org/release/IO-Socket-SSL
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.2-2
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
libXmuu provides a set of miscellaneous utility convenience functions for X
libraries to use. It is a lighter version of libXmu that does not depend
on libXt or libXext; for more information on libXmu, see libxmu6.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxml2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1942
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.9.10+dfsg-2+ubuntu18.04.1+deb.sury.org+1
Depends: libc6 (>= 2.15), libicu65 (>= 65.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Description: GNOME XML library
XML is a metalanguage to let you design your own markup language.
A regular markup language defines a way to describe information in
a certain class of documents (eg HTML). XML lets you define your
own customized markup languages for many classes of document. It
can do this because it's written in SGML, the international standard
metalanguage for markup languages.
.
This package provides a library providing an extensive API to handle
such XML data files.
Homepage: http://xmlsoft.org
Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.1.6-3
Depends: libc6 (>= 2.4)
Description: privileged helper for utmp/wtmp updates (runtime)
The libutempter library provides interface for terminal emulators such as
screen and xterm to record user sessions to utmp and wtmp files.
.
The utempter is a privileged helper used by libutempter library to manipulate
utmp and wtmp files.
Original-Maintainer: Debian Krap Maintainers <debian-qt-kde@lists.debian.org>
Homepage: http://git.altlinux.org/people/ldv/packages/?p=libutempter.git
Package: php5.6-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 60
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-readline
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14), libedit2 (>= 3.1-20130611)
Description: readline module for PHP
This package provides the readline module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 623
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0-11build1
Depends: libbz2-1.0, libc6 (>= 2.14)
Recommends: unzip
Description: Archiver for .zip files
This is InfoZIP's zip program. It produces files that are fully
compatible with the popular PKZIP program; however, the command line
options are not identical. In other words, the end result is the same,
but the methods differ. :-)
.
This version supports encryption.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.info-zip.org/Zip.html
Package: linux-modules-5.4.0-1065-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69600
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1065.68~18.04.1
Config-Version: 5.4.0-1065.68~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: hibagent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.1-0ubuntu1
Depends: python3:any (>= 3.3~), lsb-base
Conffiles:
/etc/hibagent-config.cfg 274d1bdb6e335da2a9b210ee269f5e1e
/etc/init.d/hibagent e53f51ed62946c1a57cb86f15a3fe4f2
Description: Agent that triggers hibernation on EC2 instances
Agent that triggers hibernation on EC2 instances when they receive instance
stop notifications
Original-Maintainer: Aleksei Besogonov <cyberax@amazon.com>
Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.3-0ubuntu0.18.04.2
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: libc6 (>= 2.14), libpcap0.8 (>= 1.5.1), libssl1.1 (>= 1.1.0)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
/etc/apparmor.d/usr.sbin.tcpdump 5a035d8c496c7891c76882d2be28ff7f
Description: command-line network traffic analyzer
This program allows you to dump the traffic on a network. tcpdump
is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
types.
.
It can be used to print out the headers of packets on a network
interface, filter packets that match a certain expression. You can
use this tool to track down network problems, to detect attacks
or to monitor network activities.
Homepage: http://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 398
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Depends: libc6 (>= 2.25), libuuid1 (>= 2.16)
Description: block device ID library
The blkid library allows system programs such as fsck and mount to
quickly and easily find block devices by filesystem UUID or label.
This allows system administrators to avoid specifying filesystems by
hard-coded device names and use a logical naming system instead.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: node-semver
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.4.1-1
Depends: nodejs
Description: Semantic Versioning for Node.js
Test if version(s) satisfy the supplied range(s), and sort them.
Multiple versions or ranges may be supplied.
Program exits successfully if any valid version satisfies
all supplied ranges, and prints all satisfying versions.
.
This package provides the `semver` executable and the Node.js module.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/node-semver
Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.12.2-1ubuntu1.4
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus (>= 1.12.2-1ubuntu1.4), libpam-systemd, systemd
Recommends: systemd-sysv
Breaks: dbus-x11 (<< 1.9.10-2~), policykit-1 (<< 0.105-12~), udisks2 (<< 2.1.5-2~)
Conffiles:
/etc/X11/Xsession.d/20dbus_xdg-runtime a10c47d15857ae4b557dc7e062f6e6f1
Description: simple interprocess messaging system (systemd --user integration)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
On systemd systems, this package opts in to the session model in which
a user's session starts the first time they log in, and does not end
until all their login sessions have ended. This model merges all
parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
to one graphical session, into a single "user-session" or "super-session"
within which all background D-Bus services are shared.
.
Multiple graphical sessions per user are not currently supported in this
mode; as a result, it is particularly suitable for gdm, which responds to
requests to open a parallel graphical session by switching to the existing
graphical session and unlocking it.
.
To retain dbus' traditional session semantics, in which login sessions
are artificially isolated from each other, remove this package and install
dbus-x11 instead.
.
See the dbus package description for more information about D-Bus in general.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: linux-headers-5.4.0-1097-aws
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 12518
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1097.105~18.04.1
Provides: linux-headers, linux-headers-3.0
Depends: linux-aws-5.4-headers-5.4.0-1097, libc6 (>= 2.14), libelf1 (>= 0.142), libssl1.1 (>= 1.1.0)
Description: Linux kernel headers for version 5.4.0 on 64 bit x86 SMP
This package provides kernel header files for version 5.4.0 on
64 bit x86 SMP.
.
This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-5.4.0-1097/debian.README.gz for details.
Package: linux-image-5.4.0-1099-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10324
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1099.107~18.04.1
Config-Version: 5.4.0-1099.107~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1099-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1099-aws
Conflicts: linux-image-unsigned-5.4.0-1099-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1099.107~18.04.1)
Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: markupsafe
Version: 1.0-1build1
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14)
Description: HTML/XHTML/XML string library for Python 3
MarkupSafe is a Python library implementing a unicode subclass that is
aware of HTML escaping rules. It can be used to implement automatic
string escaping.
.
This package contains the Python 3 version.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://pypi.python.org/pypi/MarkupSafe
Package: libgcc-7-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13644
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Replaces: gccgo-7 (<< 7.5.0-3ubuntu1~18.04)
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libgcc1 (>= 1:7.5.0-3ubuntu1~18.04), libgomp1 (>= 7.5.0-3ubuntu1~18.04), libitm1 (>= 7.5.0-3ubuntu1~18.04), libatomic1 (>= 7.5.0-3ubuntu1~18.04), libasan4 (>= 7.5.0-3ubuntu1~18.04), liblsan0 (>= 7.5.0-3ubuntu1~18.04), libtsan0 (>= 7.5.0-3ubuntu1~18.04), libubsan0 (>= 7.5.0-3ubuntu1~18.04), libcilkrts5 (>= 7.5.0-3ubuntu1~18.04), libmpx2 (>= 7.5.0-3ubuntu1~18.04), libquadmath0 (>= 7.5.0-3ubuntu1~18.04)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Description: GCC support library (development files)
This package contains the headers and static library files necessary for
building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-image-5.4.0-1037-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9136
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1037.39~18.04.1
Config-Version: 5.4.0-1037.39~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1037-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1037-aws
Conflicts: linux-image-unsigned-5.4.0-1037-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-validate-npm-package-license
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.1-1
Depends: nodejs, node-spdx-correct (>= 1.0.0), node-spdx-expression-parse (>= 1.0.0)
Description: Tells if a string is a valid npm package license string
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/kemitchell/validate-npm-package-license.js#readme
Package: cpp-7
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 24009
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Replaces: gccgo-7 (<< 7.5.0-3ubuntu1~18.04)
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libc6 (>= 2.14), libgmp10 (>= 2:5.0.1~), libisl19 (>= 0.15), libmpc3, libmpfr6 (>= 3.1.3), zlib1g (>= 1:1.1.4)
Suggests: gcc-7-locales (>= 7)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
A macro processor that is used automatically by the GNU C compiler
to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: x11proto-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2018.4-4
Replaces: x11proto-bigreqs-dev (<< 1:2018.3), x11proto-composite-dev (<< 1:2018.3), x11proto-core-dev (<< 2018.3), x11proto-damage-dev (<< 1:2018.3), x11proto-dmx-dev (<< 1:2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-dri3-dev (<< 2018.3), x11proto-fixes-dev (<< 1:2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-resource-dev (<< 2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xcmisc-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86bigfont-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Provides: x11proto-bigreqs-dev, x11proto-composite-dev, x11proto-core-dev, x11proto-damage-dev, x11proto-dmx-dev, x11proto-dri2-dev, x11proto-dri3-dev, x11proto-fixes-dev, x11proto-fonts-dev, x11proto-gl-dev, x11proto-input-dev, x11proto-kb-dev, x11proto-present-dev, x11proto-randr-dev, x11proto-record-dev, x11proto-render-dev, x11proto-resource-dev, x11proto-scrnsaver-dev, x11proto-video-dev, x11proto-xcmisc-dev, x11proto-xext-dev, x11proto-xf86bigfont-dev, x11proto-xf86dga-dev, x11proto-xf86dri-dev, x11proto-xf86vidmode-dev, x11proto-xinerama-dev
Depends: xorg-sgml-doctools (>= 1:1.5)
Breaks: x11proto-bigreqs-dev (<< 1:2018.3), x11proto-composite-dev (<< 1:2018.3), x11proto-core-dev (<< 2018.3), x11proto-damage-dev (<< 1:2018.3), x11proto-dmx-dev (<< 1:2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-dri3-dev (<< 2018.3), x11proto-fixes-dev (<< 1:2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-resource-dev (<< 2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xcmisc-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86bigfont-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Description: X11 extension protocols and auxiliary headers
This package provides development headers describing the wire protocol
for the X11 core and extension protocols, and also provides a number of
utility headers, used to abstract OS-specific functions.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This package is built from the X.org xorgproto module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org/
Package: linux-image-5.4.0-1078-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10315
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1078.84~18.04.1
Config-Version: 5.4.0-1078.84~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1078-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1078-aws
Conflicts: linux-image-unsigned-5.4.0-1078-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1078.84~18.04.1)
Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 918
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.8.1-2ubuntu2.2
Depends: libc6 (>= 2.14), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
The FreeType project is a team of volunteers who develop free,
portable and high-quality software solutions for digital typography.
They specifically target embedded systems and focus on bringing small,
efficient and ubiquitous products.
.
The FreeType 2 library is their new software font engine. It has been
designed to provide the following important features:
* A universal and simple API to manage font files
* Support for several font formats through loadable modules
* High-quality anti-aliasing
* High portability & performance
.
Supported font formats include:
* TrueType files (.ttf) and collections (.ttc)
* Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
* Type 1 Multiple Master fonts. The FreeType 2 API also provides
routines to manage design instances easily
* Type 1 CID-keyed fonts
* OpenType/CFF (.otf) fonts
* CFF/Type 2 fonts
* Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
the Adobe SVG viewer plugin.
* Windows FNT/FON bitmap fonts
.
This package contains the files needed to run programs that use the
FreeType 2 library.
.
Home Page: http://www.freetype.org/
Authors: David Turner <david.turner@freetype.org>
Robert Wilhelm <robert.wilhelm@freetype.org>
Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libxmu6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.2-2
Depends: libc6 (>= 2.14), libx11-6, libxext6, libxt6
Description: X11 miscellaneous utility library
libXmu provides a set of miscellaneous utility convenience functions for X
libraries to use. libXmuu is a lighter-weight version that does not depend
on libXt or libXext; for more information, see libxmuu1.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libtasn1-6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.13-2
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
Manage ASN1 (Abstract Syntax Notation One) structures.
The main features of this library are:
* on-line ASN1 structure management that doesn't require any C code
file generation.
* off-line ASN1 structure management with C code file generation
containing an array.
* DER (Distinguish Encoding Rules) encoding
* no limits for INTEGER and ENUMERATED values
.
This package contains runtime libraries.
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Homepage: http://www.gnu.org/software/libtasn1/
Package: libmagic-mgc
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 4893
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.32-2ubuntu0.4
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
This package provides the compiled magic file "magic.mgc". It has
been separated from libmagic1 in order to meet the multiarch
requirements without breaking applications that expect this file
at its absolute path.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: python-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.15~rc1-1
Replaces: python (<= 2.7.3-1~)
Depends: python2.7-minimal (>= 2.7.15~rc1-1~), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.7.3-1~), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
This package contains the interpreter and some essential modules. It's used
in the boot process for some basic tasks.
See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/
Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC 4880.
.
This package contains the translation files for the use of GnuPG in
non-English locales.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.99-1ubuntu1~18.04.2
Depends: libdrm-common (>= 2.4.99-1ubuntu1~18.04.2), libc6 (>= 2.17)
Description: Userspace interface to kernel DRM services -- runtime
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
.
This package provides the runtime environment for libdrm.
Homepage: https://cgit.freedesktop.org/mesa/drm/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-headers-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta-aws-5.4
Version: 5.4.0.1103.81
Depends: linux-headers-5.4.0-1103-aws
Description: Linux kernel headers for Amazon Web Services (AWS) systems.
This package will always depend on the latest kernel headers available
for Amazon Web Services (AWS) systems.
Package: node-inflight
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.6-1
Depends: nodejs, node-wrappy (>= 1), node-once (>= 1.3.0)
Description: add callbacks to requests in flight to avoid async duplication
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/inflight
Package: ubuntu-server
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.417
Depends: acpid, apport, at, bcache-tools, btrfs-tools, byobu, cloud-guest-utils, cloud-initramfs-copymods, cloud-initramfs-dyn-netconf, curl, dirmngr, ethtool, fonts-ubuntu-console, git, gnupg, htop, lvm2, mdadm, net-tools, open-iscsi, open-vm-tools, overlayroot, patch, pollinate, screen, software-properties-common, sosreport, tmux, update-notifier-common, vim, xfsprogs
Recommends: grub-legacy-ec2, landscape-common, lxd, snapd
Description: The Ubuntu Server system
This package depends on all of the packages in the Ubuntu Server system
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: gir1.2-pango-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Provides: gir1.2-pangocairo-1.0 (= 1.40.14-1ubuntu0.1), gir1.2-pangoft2-1.0 (= 1.40.14-1ubuntu0.1), gir1.2-pangoxft-1.0 (= 1.40.14-1ubuntu0.1)
Depends: gir1.2-freedesktop (>= 0.9.5), gir1.2-glib-2.0 (>= 0.9.5), libpango-1.0-0 (>= 1.37.5), libpangocairo-1.0-0 (>= 1.22.0), libpangoft2-1.0-0 (>= 1.14.0), libpangoxft-1.0-0 (>= 1.14.0)
Description: Layout and rendering of internationalized text - gir bindings
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package can be used by other packages using the GIRepository format to
generate dynamic bindings.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 702
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3ubuntu7.4
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export1100, libisc-export169, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
/etc/apparmor.d/sbin.dhclient 4ac7d5440afc312fc4cb6e24ec793d19
/etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
/etc/dhcp/dhclient.conf c3b6c3271031ab8e250a192f4eb18695
Description: DHCP client for automatically obtaining an IP address
This is the Internet Software Consortium's DHCP client.
.
Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
(actually dhcpd includes much of the functionality of bootpd). It
gives client machines "leases" for IP addresses and can
automatically set their network configuration. If your machine
depends on DHCP (especially likely if it's a workstation on a large
network, or a laptop, or attached to a cable modem), keep this or
another DHCP client installed.
.
Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Package: bzip2
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.6-8.1ubuntu0.2
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1ubuntu0.2), libc6 (>= 2.14)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
bzip2 is a freely available, patent free, high-quality data compressor.
It typically compresses files to within 10% to 15% of the best available
techniques, whilst being around twice as fast at compression and six
times faster at decompression.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
Depends: adduser, libc6 (>= 2.14), libsmartcols1 (>= 2.27~rc1), libsystemd0, libuuid1 (>= 2.31.1)
Pre-Depends: libuuid1 (>= 2.25-5~)
Conffiles:
/etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
The libuuid library generates and parses 128-bit Universally Unique
IDs (UUIDs). A UUID is an identifier that is unique within the space
of all such identifiers across both space and time. It can be used for
multiple purposes, from tagging objects with an extremely short lifetime
to reliably identifying very persistent objects across a network.
.
See RFC 4122 for more information.
.
This package contains the uuidgen program and the uuidd daemon.
.
The uuidd daemon is used to generate UUIDs, especially time-based
UUIDs, in a secure and guaranteed-unique fashion, even in the face of
large numbers of threads trying to grab UUIDs running on different CPUs.
It is used by libuuid as well as the uuidgen program.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: libmagic1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.32-2ubuntu0.4
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.32-2ubuntu0.4)
Suggests: file
Conffiles:
/etc/magic 272913026300e7ae9b5e2d51f138e674
/etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
This library can be used to classify files according to magic number
tests. It implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.99-1ubuntu1~18.04.2
Description: Userspace interface to kernel DRM services -- common files
This library implements the userspace interface to the kernel DRM
services. DRM stands for "Direct Rendering Manager", which is the
kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
The DRI is currently used on Linux to provide hardware-accelerated
OpenGL drivers.
.
This package provides common files for libdrm.
Homepage: https://cgit.freedesktop.org/mesa/drm/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libxml2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3460
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxml2
Version: 2.9.10+dfsg-2+ubuntu18.04.1+deb.sury.org+1
Depends: libicu-dev, libxml2 (= 2.9.10+dfsg-2+ubuntu18.04.1+deb.sury.org+1)
Suggests: pkg-config
Description: Development files for the GNOME XML library
XML is a metalanguage to let you design your own markup language.
A regular markup language defines a way to describe information in
a certain class of documents (eg HTML). XML lets you define your
own customized markup languages for many classes of document. It
can do this because it's written in SGML, the international standard
metalanguage for markup languages.
.
Install this package if you wish to develop your own programs using
the GNOME XML library.
Homepage: http://xmlsoft.org
Package: libjson-glib-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-glib
Version: 1.4.2-3ubuntu0.18.04.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.41.1), libjson-glib-1.0-common (>= 1.4.2-3ubuntu0.18.04.1)
Description: GLib JSON manipulation library
JSON-GLib is a library for parsing, generating and manipulating JavaScript
Object Notation (JSON) data streams using the GLib type system. It allows
manipulating JSON data types with a Document Object Model API. It also
allows serializing and deserializing simple or complex GObjects to and
from JSON data types.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20170808ubuntu1
Description: Linux Standard Base init script functionality
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
This package only includes the init-functions shell library, which
may be used by other packages' initialization scripts for console
logging and other purposes.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Package: libhogweed4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.4.1-0ubuntu0.18.04.1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.4.1-0ubuntu0.18.04.1)
Description: low level cryptographic library (public-key cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the asymmetric cryptographic algorithms, which,
require the GNU multiple precision arithmetic library (libgmp) for
their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.187-1ubuntu0.1
Replaces: netcat (<< 1.10-35)
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.15)
Breaks: netcat (<< 1.10-35)
Description: TCP/IP swiss army knife
A simple Unix utility which reads and writes data across network
connections using TCP or UDP protocol. It is designed to be a reliable
"back-end" tool that can be used directly or easily driven by other
programs and scripts. At the same time it is a feature-rich network
debugging and exploration tool, since it can create almost any kind of
connection you would need and has several interesting built-in
capabilities.
.
This package contains the OpenBSD rewrite of netcat, including support
for IPv6, proxies, and Unix sockets.
Original-Maintainer: Aron Xu <aron@debian.org>
Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.11-2
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
Graphite is a system that can be used to create and use "smart fonts" capable
of displaying writing systems with various complex behaviors, such as:
contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
stacking diacritics and complex positioning.
.
This library was designed and developed by the NRSI (Non-Roman Script
Initiative) within SIL International (www.sil.org) to act as a complement to
other smart font rendering technologies with limited practical local
extensibility. Its purpose is to help meet the needs of a very large number
of "minority language" communities for local extensibility of complex script
behaviors.
.
The behavior of the rendering engine for a given writing system is specified
through extra tables added to a TrueType font. These tables are generated by
compiling a GDL (Graphite Description Language) source file into a font using
grcompiler.
.
This package contains the shared library.
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: http://graphite.sil.org/
Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 713
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.2-2.1ubuntu1.6
Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.15), libpopt0 (>= 1.14), lsb-base (>= 3.2-14), base-files (>= 4.0.1), init-system-helpers (>= 1.18~)
Suggests: openssh-client, openssh-server
Breaks: duplicity (<< 0.6.11)
Conffiles:
/etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
/etc/init.d/rsync c5d89677f904551f5b192f35ad98d73c
Description: fast, versatile, remote (and local) file-copying tool
rsync is a fast and versatile file-copying tool which can copy locally
and to/from a remote host. It offers many options to control its behavior,
and its remote-update protocol can minimize network traffic to make
transferring updates between machines fast and efficient.
.
It is widely used for backups and mirroring and as an improved copy
command for everyday use.
.
This package provides both the rsync command line tool and optional
daemon functionality.
Homepage: http://rsync.samba.org/
Original-Maintainer: Paul Slootman <paul@debian.org>
Package: libjbig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-3.1ubuntu0.18.04.1
Depends: libjbig0 (= 2.1-3.1ubuntu0.18.04.1)
Description: JBIGkit development files
JBIG-KIT provides a portable library of compression and decompression functions
with a documented interface that you can include very easily into your image or
document processing software.
.
This package contains the headers for the library.
.
Please note: There is no statically linked library in this package, and what
was previously two libraries with a single common file has been merged into
one library (libjbig).
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 354
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.4), libgcc1 (>= 1:3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
LeakSanitizer (Lsan) is a memory leak detector which is integrated
into AddressSanitizer.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.12-3ubuntu1.1
Provides: watch
Depends: libc6 (>= 2.27), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
/etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
/etc/sysctl.conf 36547fde818f251846b0198564060927
/etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
/etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
/etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
/etc/sysctl.d/10-link-restrictions.conf 8568316f2baa8db06554dab91f93a161
/etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
/etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
/etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
/etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
/etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
Description: /proc file system utilities
This package provides command line and full screen utilities for browsing
procfs, a "pseudo" file system dynamically generated by the kernel to
provide information about the status of entries in its process table
(such as whether the process is running, stopped, or a "zombie").
.
It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>
Package: libcroco3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcroco
Version: 0.6.12-2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.16.0), libxml2 (>= 2.7.4)
Description: Cascading Style Sheet (CSS) parsing and manipulation toolkit
Services provided by Libcroco
* A parser module that provides
o A SAC like API. SAC stands for Simple API for CSS. SAC is an event driven
API which resembles SAX in the xml world.
o A CSSOM like API. CSSOM stands for Cascading Style Sheet Object Model.
.
The libcroco parser implements the CSS Level 2 specification, the CSS
forward compatibility rules and the CSS cascading rules.
.
* A CSS2 selection engine
Given an xml element node (that obviously comes from an xml document) and
a stylesheet cascade, the Libcroco selection engine can evaluate the css
selectors of the cascade and return the style properties associated to
the xml element node.
.
Note that the xml manipulation toolkit used by the libcroco selection
engine at the moment is libxml2.
.
This package contains the shared libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: php-composer-semver
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.4.2-1
Depends: php-common
Description: utilities, version constraint parsing and validation
The semver (Semantic Versioning) library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/semver
Package: linux-modules-5.4.0-1081-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69729
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1081.88~18.04.1
Config-Version: 5.4.0-1081.88~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.3.5), libglib2.0-0 (>= 2.37.3), libharfbuzz0b (>= 1.2.6), libpango-1.0-0 (>= 1.37.2)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: linux-image-5.4.0-1059-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9340
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1059.62~18.04.1
Config-Version: 5.4.0-1059.62~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1059-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1059-aws
Conflicts: linux-image-unsigned-5.4.0-1059-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.4
Depends: libc6 (>= 2.27), libcom-err2 (>= 1.34), libk5crypto3 (>= 1.16), libkrb5-3 (= 1.16-2ubuntu0.4), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the MIT Kerberos
implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jsonschema
Version: 2.6.0-2
Depends: python3 (>= 3.2.3), python3-pkg-resources, python3:any (>= 3.3.2-2~)
Description: An(other) implementation of JSON Schema (Draft 3 and 4) - Python 3.x
JSON Schema is a specification for a JSON-based format for defining
the structure of JSON data. JSON Schema provides a contract for what
JSON data is required for a given application and how it can be
modified, much like what XML Schema provides for XML. JSON Schema is
intended to provide validation, documentation, and interaction control
of JSON data.
.
This package contains the Python 3.x module.
Original-Maintainer: Debian OpenStack <openstack-devel@lists.alioth.debian.org>
Homepage: https://github.com/Julian/jsonschema
Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 474
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.29-5ubuntu0.3
Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
XSLT is an XML language for defining transformations of XML files from
XML to some other arbitrary format, such as XML, HTML, plain text, etc.
using standard XSLT stylesheets. libxslt is a C library which
implements XSLT version 1.0.
.
This package contains the libxslt library used by applications for XSLT
transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: xauth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:1.0.10-1
Depends: libc6 (>= 2.14), libx11-6, libxau6, libxext6, libxmuu1
Description: X authentication utility
xauth is a small utility to read and manipulate Xauthority files, which
are used by servers and clients alike to control authentication and access
to X sessions.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: linux-modules-5.4.0-1056-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69514
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1056.59~18.04.1
Config-Version: 5.4.0-1056.59~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libargon2-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20161029-1.1
Depends: libc6 (>= 2.14)
Description: memory-hard hashing function - runtime library
Argon2 is a password-hashing function that can be used to hash passwords
for credential storage, key derivation, or other applications.
.
There are two main versions of Argon2: Argon2i and Argon2d.
Argon2i is the safest against side-channel attacks, while Argon2d provides
the highest resistance against GPU cracking attacks.
.
Argon2i and Argon2d are parametrized by:
* A time cost, which defines the amount of computation realized and
therefore the execution time, given in number of iterations
* A memory cost, which defines the memory usage, given in kibibytes
* A parallelism degree, which defines the number of parallel threads
.
This package includes the dynamic library against which programs are linked.
Original-Maintainer: Luca Bruno <lucab@debian.org>
Homepage: https://github.com/P-H-C/phc-winner-argon2
Package: libstdc++-7-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 15352
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Provides: libstdc++-dev
Depends: gcc-7-base (= 7.5.0-3ubuntu1~18.04), libgcc-7-dev (= 7.5.0-3ubuntu1~18.04), libstdc++6 (>= 7.5.0-3ubuntu1~18.04), libc6-dev (>= 2.13-0ubuntu6)
Suggests: libstdc++-7-doc
Conflicts: libg++2.8-dev, libg++27-dev, libg++272-dev (<< 2.7.2.8-1), libstdc++2.10-dev (<< 1:2.95.3-2), libstdc++2.8-dev, libstdc++2.9-dev, libstdc++2.9-glibc2.1-dev, libstdc++3.0-dev
Description: GNU Standard C++ Library v3 (development files)
This package contains the headers and static library files necessary for
building C++ programs which use libstdc++.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libaccountsservice0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: accountsservice
Version: 0.6.45-1ubuntu1.3
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 209)
Breaks: accountsservice (<< 0.6.5)
Description: query and manipulate user account information - shared libraries
The AccountService project provides a set of D-Bus
interfaces for querying and manipulating user account
information and an implementation of these interfaces,
based on the useradd, usermod and userdel commands.
.
This package provides the shared libraries of the
AccountService library.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 568
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 5.26.1-6ubuntu0.7
Replaces: perl-modules (<< 5.22.0~)
Depends: perl-base (= 5.26.1-6ubuntu0.7), perl-modules-5.26 (>= 5.26.1-6ubuntu0.7), libperl5.26 (= 5.26.1-6ubuntu0.7)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: libperl-dev (<< 5.24.0~), perl-doc (<< 5.26.1-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
/etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
Perl is a highly capable, feature-rich programming language with over
20 years of development. Perl 5 runs on over 100 platforms from
portables to mainframes. Perl is suitable for both rapid prototyping
and large scale development projects.
.
Perl 5 supports many programming styles, including procedural,
functional, and object-oriented. In addition to this, it is supported
by an ever-growing collection of reusable modules which accelerate
development. Some of these modules include Web frameworks, database
integration, networking protocols, and encryption. Perl provides
interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.176-4.1ubuntu3)
Version: 2:1.02.145-4.1ubuntu3
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.103)
Description: Linux Kernel Device Mapper event support library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains the userspace library to help with event monitoring
for devmapper devices, in conjunction with the dmevent daemon.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1097-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 69685
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1097.105~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libgpg-error0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.27-6
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
Library that defines common error values for all GnuPG
components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon and possibly more in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Stefan Schörghofer <amd1212@4md.gr>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.5.1-4+ubuntu18.04.1+deb.sury.org+2
Depends: libbz2-1.0, libc6 (>= 2.14), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
libzip is a C library for reading, creating, and modifying zip archives. Files
can be added from data buffers, files, or compressed data copied directly from
other zip archives. Changes made without closing the archive can be reverted.
.
This package contains the files necessary for running applications that
use the libzip library.
Homepage: https://libzip.org
Package: node-retry
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.10.1-1
Depends: nodejs
Description: Retry strategies for failed operations module for Node.js
node-retry abstracts exponential and custom retry strategies for failed
operations. Its parameters are the number of retries, exponential
factor, minimum and maximum (randomized) timeouts.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/tim-kos/node-retry
Package: gcc-7-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-7
Version: 7.5.0-3ubuntu1~18.04
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat (<< 7), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
This package contains files common to all languages and libraries
contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: plymouth
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.3-1ubuntu7
Replaces: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Depends: init-system-helpers (>= 1.18), lsb-base (>= 3.0-6), systemd (>= 232-8~), udev (>= 232-8~), libc6 (>= 2.14), libdrm2 (>= 2.4.17), libplymouth4 (>= 0.9.3)
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Suggests: desktop-base, plymouth-themes
Breaks: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Conflicts: console-common
Conffiles:
/etc/init.d/plymouth 7603d0f581e54fdbe31ad62cbb4cfd22
/etc/init.d/plymouth-log 0f1be14b21796a952e115c03a86787e0
Description: boot animation, logger and I/O multiplexer
Plymouth provides a boot-time I/O multiplexing framework - the most obvious
use for which is to provide an attractive graphical animation in place of
the text messages that normally get shown during boot. (The messages are
instead redirected to a logfile for later viewing.) However, in event-driven
boot systems Plymouth can also usefully handle user interaction such as
password prompts for encrypted file systems.
.
This package provides the basic framework, enabling a text-mode animation.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: libpython3.6-minimal
Status: install ok installed
Priority: important
Section: python
Installed-Size: 3807
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.6
Version: 3.6.9-1~18.04ubuntu1.12
Depends: libc6 (>= 2.4), libssl1.1 (>= 1.1.1)
Recommends: libpython3.6-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.6/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.6)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.6-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-problem-report
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 174
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.9-0ubuntu7.29
Depends: python3:any (>= 3.3.2-2~)
Description: Python 3 library to handle problem reports
This Python library provides an interface for creating, modifying,
and accessing standardized problem reports for program and kernel
crashes and packaging bugs.
.
These problem reports use standard Debian control format syntax
(RFC822).
Homepage: https://wiki.ubuntu.com/Apport
Package: libxcb-render0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libxcb-render0 (= 1.13-2~ubuntu18.04), libxcb1-dev
Description: X C Binding, render extension, development files
This package contains the header and library files needed to build software
using libxcb-render, the render extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: python3-asn1crypto
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: asn1crypto
Version: 0.24.0-1
Depends: python3:any (>= 3.3.2-2~)
Description: Fast ASN.1 parser and serializer (Python 3)
asn1crypto focuses on:
- Delayed parsing of byte string values
- Persistence of original ASN.1 encoded data until a value is changed
- Lazy loading of child fields
- Utilization of high-level Python stdlib modules
.
This package contains the Python 3 version of asn1crypto.
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>
Homepage: https://github.com/wbond/asn1crypto
Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: blinker
Version: 1.4+dfsg1-0.1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
Blinker provides a fast dispatching system that allows any number of
interested parties to subscribe to events, or "signals".
.
Signal receivers can subscribe to specific senders or receive signals
sent by any sender.
.
This package contains the Python 3 version.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://pythonhosted.org/blinker/
Package: liblvm2cmd2.02
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2484
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.02.176-4.1ubuntu3
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.141), libsystemd0 (>= 222), libudev1 (>= 183), dmeventd
Description: LVM2 command library
This package contains the lvm2cmd shared library.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: libpython-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python-defaults
Version: 2.7.15~rc1-1
Depends: libpython2.7-stdlib (>= 2.7.15~rc1-1~)
Description: interactive high-level object-oriented language (default python version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python version (currently v2.7).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/
Package: libfftw3-quad3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2049
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.7-1
Depends: libc6 (>= 2.14), libgomp1 (>= 4.9), libquadmath0 (>= 4.6)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Quad precision
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the shared library
for quad precision transforms.
.
To get the static library and the header files, you need to install
libfftw3-dev. For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: libpoppler73
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2732
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: poppler
Version: 0.62.0-2ubuntu2.14
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.16), libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 4.9), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.1.4)
Recommends: poppler-data
Description: PDF rendering library
Poppler is a PDF rendering library based on Xpdf PDF viewer.
.
This package contains the shared core library.
Homepage: http://poppler.freedesktop.org/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: python3-rsa
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-rsa
Version: 3.4.2-1
Depends: python3, python3-pyasn1 (>= 0.1.3), python3:any (>= 3.3.2-2~)
Description: Pure-Python RSA implementation (Python 3)
Python-RSA is a pure-Python RSA implementation. It supports encryption
and decryption, signing and verifying signatures, and key generation
according to PKCS#1 version 1.5. It can be used as a Python library as
well as on the commandline. The code was mostly written by Sybren A. Stüvel.
.
This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://stuvel.eu/rsa
Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 420
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.30-21ubuntu1~18.04.9
Replaces: binutils (<< 2.29.1-3.1~)
Breaks: binutils (<< 2.29.1-3.1~)
Description: Common files for the GNU assembler, linker and binary utilities
This package contains the localization files used by binutils packages for
various target architectures and parts of the binutils documentation. It is
not useful on its own.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libisccfg160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 233
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libdns1100 (= 1:9.11.3+dfsg-1ubuntu1.18), libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libisccc160 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.4)
Description: Config File Handling Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisccfg shared library used by BIND's daemons
and clients to read and write ISC-style configuration files like named.conf
and rndc.conf.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: busybox-initramfs
Status: install ok installed
Priority: important
Section: shells
Installed-Size: 346
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.27.2-2ubuntu3.4
Depends: libc6 (>= 2.11)
Description: Standalone shell setup for initramfs
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for the most common
utilities you would usually find on your desktop system (i.e., ls, cp, mv,
mount, tar, etc.). The utilities in BusyBox generally have fewer options than
their full-featured GNU cousins; however, the options that are included
provide the expected functionality and behave very much like their GNU
counterparts.
.
busybox-initramfs provides a simple stand alone shell that provides
only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libxmlsec1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 438
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.25-1build1
Depends: libc6 (>= 2.14), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25)
Description: XML security library
The XML Security Library implements standards related to secure handling
of XML data.
.
This package provides dynamic libraries for use by applications.
Specifically, it provides all XML security library functionality
except for the cryptography engine.
Homepage: http://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.22-3build2
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.4)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
File::FcntlLock is a Perl module to do file locking in an object oriented
fashion using the fcntl(2) system call. This allows locks on parts of a file
as well as on the whole file and overcomes some known problems with flock(2),
on which Perl's flock() function is based.
.
Furthermore due to its design it supports reliable locking over NFS.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-FcntlLock
Package: libcupsimage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.2.7-1ubuntu2.10
Depends: libc6 (>= 2.14), libcups2 (= 2.2.7-1ubuntu2.10)
Recommends: libcupsfilters1 (>= 1.0~b1)
Description: Common UNIX Printing System(tm) - Raster image library
The Common UNIX Printing System (or CUPS(tm)) is a printing system and
general replacement for lpd and the like. It supports the Internet
Printing Protocol (IPP), and has its own filtering driver model for
handling various document types.
.
This package provides the image libraries for handling the CUPS
raster format.
Homepage: https://www.cups.org/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: libilmbase12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 569
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ilmbase
Version: 2.2.0-11ubuntu2
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: several utility libraries from ILM used by OpenEXR
IlmBase are a set of utility libraries released by ILM, and used in
their OpenEXR implementation. Included in this package you can find:
.
* libHalf: a class (Half) for manipulating "half" values (16-bit
floating point format) as if they were a built-in C++ data type.
.
* libIlmThread: a thread abstraction library on top of pthreads.
.
* libImath: a math library with support for matrices, 2d- and
3d-transformations, solvers for linear/quadratic/cubic equations,
and more.
.
* libIex: an exception handling library.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: http://www.openexr.com
Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.08-3
Depends: perl, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
Algorithm::Merge provides three-way merge and diff functions, complementing
the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
three sets of items, known as the original, left and right, this module can
take a three-way difference or merge them. Taking a difference provides an
array reference that is very similar to the behaviour of Algorithm::Diff. One
can also implement custom conflict resolution using the CONFLICT callback.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Merge
Package: libatk1.0-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: atk1.0
Version: 2.28.1-1
Description: Common files for the ATK accessibility toolkit
ATK is a toolkit providing accessibility interfaces for applications or
other toolkits. By implementing these interfaces, those other toolkits or
applications can be used with tools such as screen readers, magnifiers, and
other alternative input devices.
.
This contains the common files which the runtime libraries need.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Accessibility
Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 760
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.9.3-2
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.14), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: spell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
/etc/nanorc 6d69e5077f001dcf11ddb2d81e1c9076
Description: small, friendly text editor inspired by Pico
GNU nano is an easy-to-use text editor originally designed as a replacement
for Pico, the ncurses-based editor from the non-free mailer package Pine
(itself now available under the Apache License as Alpine).
.
However, GNU nano also implements many features missing in pico, including:
- undo/redo
- line numbering
- syntax coloring
- soft-wrapping of overlong lines
- selecting text by holding Shift
- interactive search and replace (with regular expression support)
- a go-to line (and column) command
- support for multiple file buffers
- auto-indentation
- tab completion of filenames and search terms
- toggling features while running
- and full internationalization support
Original-Maintainer: Jordi Mallach <jordi@debian.org>
Homepage: https://www.nano-editor.org/
Package: intltool-debian
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.35.0+20060710.4
Depends: perl, gettext
Description: Help i18n of RFC822 compliant config files
Intltool is a bunch of scripts written by the GNOME project to
internationalize many different file formats. This package is
a slightly modified version which adds support for RFC822
compliant config files, e.g. Debconf templates files.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: lxd-client
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 10276
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxd
Version: 3.0.1-0ubuntu1~18.04.1
Replaces: lxc1 (<= 2.0.0~rc13-0ubuntu2~)
Depends: libc6 (>= 2.9)
Suggests: lxd
Breaks: lxc1 (<= 2.0.0~rc13-0ubuntu2~)
Description: Container hypervisor based on LXC - client
LXD offers a REST API to remotely manage containers over the network,
using an image based workflow and with support for live migration.
.
This package contains the command line client.
Built-Using: golang-1.10 (= 1.10.1-1ubuntu2)
Homepage: https://linuxcontainers.org/
Package: snapd
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 166792
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.58+18.04.1
Replaces: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Depends: adduser, apparmor (>= 2.10.95-0ubuntu2.2), ca-certificates, openssh-client, squashfs-tools, systemd, udev, libc6 (>= 2.27), libfuse2 (>= 2.6), liblzma5 (>= 5.1.1alpha+20110809), liblzo2-2, libudev1 (>= 183), zlib1g (>= 1:1.1.4), default-dbus-session-bus | dbus-session-bus
Recommends: gnupg, fuse3 (>= 3.10.5-1) | fuse
Suggests: zenity | kdialog
Breaks: apt (<< 1.6.3), snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), systemd (<< 237-3ubuntu10.24), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Conflicts: snap (<< 2013-11-29-1ubuntu1)
Conffiles:
/etc/apparmor.d/usr.lib.snapd.snap-confine.real b7e64e65a9b069d8007643335eb07608
/etc/apt/apt.conf.d/20snapd.conf dd6f6ce79792eecd4a57bdde4e6fff7d
/etc/profile.d/apps-bin-path.sh cf10aed8bb987ded8b7f4ba4303c1e9b
/etc/xdg/autostart/snap-userd-autostart.desktop 4aaaa2fe36462a072a72e09cad553362
Description: Daemon and tooling that enable snap packages
Install, configure, refresh and remove snap packages. Snaps are
'universal' packages that work across many different Linux systems,
enabling secure distribution of the latest apps and utilities for
cloud, servers, desktops and the internet of things.
.
Start with 'snap list' to see installed snaps.
Built-Using: apparmor (= 2.12-4ubuntu5.1), libcap2 (= 1:2.25-1.2), libseccomp (= 2.5.1-1ubuntu1~18.04.2)
Homepage: https://github.com/snapcore/snapd
Package: libxml-sax-base-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.09-1
Replaces: libxml-sax-perl (<< 0.99+dfsg-1)
Depends: perl
Breaks: libxml-sax-perl (<< 0.99+dfsg-1)
Description: base class for SAX drivers and filters
XML::SAX::Base is a base class for PerlSAX drivers and filters. The main
advantages that it provides are easy dispatching of events the right way (ie
it takes care for you of checking that the handler has implemented that
method, or has defined an AUTOLOAD), and the guarantee that filters will pass
along events that they aren't implementing to handlers downstream that might
nevertheless be interested in them.
.
This package also provides XML::SAX::Exception.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-SAX-Base
Package: python3-configargparse
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-configargparse
Version: 0.11.0-1
Depends: python3:any (>= 3.3.2-2~)
Description: replacement for argparse with config files and environment variables (Python 3)
Applications with more than a handful of user-settable options are best
configured through a combination of command line args, config files,
hard-coded defaults, and in some cases, environment variables.
.
Python’s command line parsing modules such as argparse have very limited
support for config files and environment variables, so this module extends
argparse to add these features.
.
This is the Python 3 module.
Original-Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Homepage: https://github.com/zorro3/ConfigArgParse
Package: node-tar
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.2.1-1
Depends: nodejs, node-block-stream, node-fstream (>= 1.0.10), node-inherits
Description: read and write portable tar archives module for Node.js
node-tar is able to read and write tar archives generated by
bsdtar, gnutar, solaris posix tar, and "Schilly" tar.
node-tar is a well-tested essential piece of software for npm,
the Node.js package manager.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/npm/node-tar
Package: python3-zope.hookable
Status: install ok installed
Priority: extra
Section: zope
Installed-Size: 48
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: amd64
Source: zope.hookable
Version: 4.0.4-4+ubuntu18.04.1+certbot+1
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3-pkg-resources, python3:any (>= 3.3.2-2~), libc6 (>= 2.4)
Conflicts: zope3
Description: Hookable object support
This package provides support for Hookable object.
.
This is the Python 3 version.
Homepage: http://pypi.python.org/pypi/zope.hookable
Package: squashfs-tools
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 310
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.3-6ubuntu0.18.04.4
Depends: libc6 (>= 2.14), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), liblzo2-2, zlib1g (>= 1:1.1.4)
Description: Tool to create and append to squashfs filesystems
Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
compression to compress both files, inodes and directories. Inodes in the
system are very small and all blocks are packed to minimise data overhead.
Block sizes greater than 4K are supported up to a maximum of 64K.
.
Squashfs is intended for general read-only filesystem use, for archival use
(i.e. in cases where a .tar.gz file may be used), and in constrained block
device/memory systems (e.g. embedded systems) where low overhead is needed.
Homepage: http://squashfs.sourceforge.net/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: pkg-config
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.29.1-0ubuntu2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.16.0), dpkg-dev, libdpkg-perl
Conffiles:
/etc/dpkg/dpkg.cfg.d/pkg-config-hook-config 467c877de00898418a9b26d432a1719a
Description: manage compile and link flags for libraries
pkg-config is a system for managing library compile and link flags that
works with automake and autoconf.
.
Increasingly libraries ship with ".pc" files that allow querying of the
compiler and linker flags needed to use them through the pkg-config(1)
program.
Homepage: http://pkg-config.freedesktop.org
Original-Maintainer: Tollef Fog Heen <tfheen@debian.org>
Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 386
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 10.1ubuntu2.3
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Depends: libc6 (>= 2.3.4)
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
/etc/debian_version 71f3b31c52b52a91784e496ddf94b019
/etc/default/motd-news c08a329a603b640095da5ffe4e73491c
/etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
/etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
/etc/host.conf 89408008f2585c957c031716600d5a80
/etc/issue 38103f9a76bb14e2abbc051b65722cff
/etc/issue.net 4c773f83594f2a3f47059a348a0af0a5
/etc/legal 0110925f6e068836ef2e09356e3651d9
/etc/lsb-release d1b7cd24192250d97c4699cbe7a47cfa
/etc/profile.d/01-locale-fix.sh 870346d97b16faac4a371b04ffe4cc2f
/etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
/etc/update-motd.d/10-help-text d95d18b11ac12cf6582d08a1643034f3
/etc/update-motd.d/50-motd-news c1d89e86b0eed1ffb1835bcdd78dfe32
Description: Debian base system miscellaneous files
This package contains the basic filesystem hierarchy of a Debian system, and
several important miscellaneous files, such as /etc/debian_version,
/etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: libxml-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.24-1
Depends: perl, libxml-libxml-perl | libxml-sax-expat-perl, libxml-namespacesupport-perl, libxml-sax-perl
Description: Perl module for reading and writing XML
The XML::Simple module provides a simple API layer on top of an underlying
XML parsing module to maintain XML files (especially configuration
files). Two functions are exported: XMLin() and XMLout().
.
The simplest approach is to call these two functions directly, but an
optional object oriented interface allows them to be called as
methods of an XML::Simple object. The object interface can also be
used at either end of a SAX pipeline.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-Simple
Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblqr
Version: 0.4.2-2.1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24.0)
Description: converts plain array images into multi-size representation
The LiquidRescale (lqr) library provides a C/C++ API for performing
non-uniform resizing of images by the seam-carving technique.
.
The library takes images in plain array format as input and converts
them to a multi-size representation.
.
Following is a list of features:
.
* Areas in the image can be marked for preservation or discard
* Once the image has been fully processed, the scaling can be done
in real-time. In fact, the information can be saved and read out
later without any further processing
* The resizing is done with a single function which automatically
performs all the necessary operations; it can also work in
successive steps without wasting computational time
* Possibility to tune the carving operation by letting the seams be
less connected, or more rigid, or both
* Can export and import the visibility map (the seams)
* Other images can be attached and undergo the same carving process
as the parent image
* The automatic feature detection algorithm can be tuned by
selecting among different energy gradient functions
* Reports progress through a customizable interface
* A signalling system permits one to cleanly handle errors
.
The library implements the algorithm described in the paper "Seam
Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
Shamir, which can be found at
http://www.faculty.idc.ac.il/arik/imret.pdf
.
This package contains the shared library.
Original-Maintainer: Bernd Zeimetz <bzed@debian.org>
Homepage: http://liblqr.wikidot.com/
Package: grub-gfxpayload-lists
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 47
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: amd64
Version: 0.7
Depends: grub-pc (>= 1.99~20101210-1ubuntu2)
Description: GRUB gfxpayload blacklist
The 'set gfxpayload=keep' facility in GRUB provides smooth graphical
handover to the Linux kernel. Unfortunately, this does not work on all
systems, resulting in a black or corrupt display. This package provides a
blacklist of PCI IDs which fail.
.
We maintain this separately from GRUB because it is likely to be updated on
a different schedule.
Package: libxft-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 215
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xft
Version: 2.3.2-1
Provides: libxft2-dev
Depends: libxft2 (= 2.3.2-1), libc6-dev | libc-dev, libfontconfig1-dev, libfreetype6-dev, libx11-dev (>= 2:1.0.0), libxrender-dev, zlib1g-dev | libz-dev
Description: FreeType-based font drawing library for X (development files)
Xft provides a client-side font API for X applications, making the FreeType
font rasterizer available to X clients. Fontconfig is used for font
specification resolution. Where available, the RENDER extension handles
glyph drawing; otherwise, the core X protocol is used.
.
This package provides a static library and C header files.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libjbig2dec0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbig2dec
Version: 0.13-6
Depends: libc6 (>= 2.14)
Description: JBIG2 decoder library - shared libraries
jbig2dec is a decoder library and example utility implementing the JBIG2
bi-level image compression spec. Also known as ITU T.88 and ISO IEC
14492, and included by reference in Adobe's PDF version 1.4 and later.
.
This package contains the shared library libjbig2dec.
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Homepage: http://git.ghostscript.com/?p=jbig2dec.git
Package: linux-aws-5.4-headers-5.4.0-1084
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71063
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1084.91~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1084/debian.README.gz for details
Package: libmpx2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Replaces: libmpx0 (<< 6-20160120-1)
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.17)
Description: Intel memory protection extensions (runtime)
Intel MPX is a set of processor features which, with compiler,
runtime library and OS support, brings increased robustness to
software by checking pointer references whose compile time normal
intentions are usurped at runtime due to buffer overflow.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libyaml-0-2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.1.7-2ubuntu3
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
LibYAML is a C library for parsing and emitting data in YAML 1.1, a
human-readable data serialization format.
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>
Homepage: http://pyyaml.org/wiki/LibYAML
Package: libgmp10
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 559
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.1.2+dfsg-2ubuntu0.1
Depends: libc6 (>= 2.14)
Description: Multiprecision arithmetic library
GNU MP is a programmer's library for arbitrary precision
arithmetic (ie, a bignum package). It can operate on signed
integer, rational, and floating point numeric types.
.
It has a rich set of functions, and the functions have a regular
interface.
Homepage: http://gmplib.org/
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Package: node-forever-agent
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.5.1-1
Depends: nodejs
Description: HTTP agent supporting keep-alive requests - module for Node.js
node-forever-agent keeps socket connections alive between keep-alive
requests.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/mikeal/forever-agent
Package: linux-modules-5.4.0-1103-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 69677
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1103.111~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: gtk-update-icon-cache
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.22.30-1ubuntu4
Replaces: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Depends: libc6 (>= 2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.55.2)
Breaks: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Description: icon theme caching utility
gtk-update-icon-cache creates mmap()able cache files for icon themes.
.
GTK+ can use the cache files created by gtk-update-icon-cache to avoid a lot
of system call and disk seek overhead when the application starts. Since the
format of the cache files allows them to be mmap()ed shared between multiple
applications, the overall memory consumption is reduced as well.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.12
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
This package provides a number of small utilities which are used
by programs to sensibly select and spawn an appropriate browser,
editor, or pager.
.
The specific utilities included are: sensible-browser sensible-editor
sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 688
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.34.0-2ubuntu0.1
Depends: libc6 (>= 2.14)
Description: pixel-manipulation library for X and cairo
A library for manipulating pixel regions -- a set of Y-X banded
rectangles, image compositing using the Porter/Duff model
and implicit mask generation for geometric primitives including
trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 358
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyasn1
Version: 0.4.2-3
Depends: python3:any (>= 3.3.2-2~)
Breaks: python3-pysnmp4 (<< 4.3.4)
Description: ASN.1 library for Python (Python 3 module)
This is an implementation of ASN.1 types and codecs in Python
programming language. It has been first written to support particular
protocol (SNMP) but then generalized to be suitable for a wide range
of protocols based on ASN.1 specification.
.
This package contains the Python 3 module.
Original-Maintainer: Jan Lübbe <jluebbe@debian.org>
Homepage: http://pyasn1.sourceforge.net/
Package: dh-strip-nondeterminism
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: strip-nondeterminism
Version: 0.040-1.1~build1
Depends: debhelper, libfile-stripnondeterminism-perl (= 0.040-1.1~build1), libtimedate-perl, perl:any
Description: file non-deterministic information stripper — Debhelper add-on
StripNondeterminism is a library for stripping non-deterministic information
such as timestamps and filesystem ordering from various file and archive
formats.
.
This can be used as a post-processing step to improve the reproducibility of a
build product, when the build process itself cannot be made deterministic.
.
It is used as part of the Reproducible Builds project, although it should be
considered a temporary workaround which should not be needed in the long
term; upstream software should be reproducible even without using such a tool.
.
This package installs the ‘dh_strip_nondeterminism’ Debhelper command that
strips nondeterminism as part of a Debian package build process.
Original-Maintainer: Reproducible builds folks <reproducible-builds@lists.alioth.debian.org>
Homepage: https://reproducible-builds.org/
Package: acpid
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2.0.28-1ubuntu1
Depends: libc6 (>= 2.15), init-system-helpers (>= 1.18~), lsb-base (>= 3.2-14), kmod
Conffiles:
/etc/default/acpid 5b934527919a9bba89c7978d15e918b3
/etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc
Description: Advanced Configuration and Power Interface event daemon
Modern computers support the Advanced Configuration and Power Interface (ACPI)
to allow intelligent power management on your system and to query battery and
configuration status.
.
ACPID is a completely flexible, totally extensible daemon for delivering
ACPI events. It listens on netlink interface (or on the deprecated file
/proc/acpi/event), and when an event occurs, executes programs to handle the
event. The programs it executes are configured through a set of configuration
files, which can be dropped into place by packages or by the admin.
Homepage: http://sourceforge.net/projects/acpid2/
Original-Maintainer: Debian Acpi Team <pkg-acpi-devel@lists.alioth.debian.org>
Package: linux-modules-5.3.0-1030-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64624
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1030.32~18.04.1
Config-Version: 5.3.0-1030.32~18.04.1
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libicu65
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32496
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 65.1-1+ubuntu18.04.1+deb.sury.org+1
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains the runtime
libraries for ICU.
Homepage: http://www.icu-project.org
Package: xtrans-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xtrans
Version: 1.3.5-1
Description: X transport library (development files)
xtrans includes a number of routines to make X implementations
transport-independent; at time of writing, it includes support for UNIX
sockets, IPv4, IPv6, and DECnet.
.
xtrans is not actually a library in itself; it includes .c files which are
then used in the compilation of X servers, libraries, et al.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libxtrans
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libmime-charset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.012.2-1
Depends: perl
Suggests: libencode-hanextra-perl, libpod2-base-perl
Description: module for MIME character set information
MIME::Charset provides information about character sets specified in the MIME
(Multipurpose Internet Mail Extensions) format. It is often used to describe
character set and encoding information for messages on the Internet.
.
This module allows one to work with character sets and encodings, providing
a simple facility for converting between them.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/MIME-Charset
Package: node-underscore
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: underscore
Version: 1.8.3~dfsg-1ubuntu0.1
Depends: nodejs, libjs-underscore
Description: JavaScript's functional programming helper library - NodeJS
Underscore is a utility-belt library for JavaScript that provides a lot
of the functional programming support that you would expect in
Prototype.js (or Ruby), but without extending any of the built-in
JavaScript objects. It's the tie to go along with jQuery's tux.
.
Underscore provides 60-odd functions that support both the usual
functional suspects: map, select, invoke - as well as more specialized
helpers: function binding, javascript templating, deep equality
testing, and so on. It delegates to built-in functions, if present, so
modern browsers will use the native implementations of forEach, map,
reduce, filter, every, some and indexOf.
.
This package contains the NodeJS module.
Homepage: http://underscorejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: python3-docutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1745
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.14+dfsg-3
Provides: docutils
Depends: docutils-common (= 0.14+dfsg-3), python3-roman, python3:any (>= 3.3.2-2~)
Recommends: libpaper-utils, python3-pil, python3-pygments
Suggests: docutils-doc, fonts-linuxlibertine | ttf-linux-libertine, texlive-lang-french, texlive-latex-base, texlive-latex-recommended
Description: text processing system for reStructuredText (implemented in Python 3)
reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
markup syntax and parser system. It is useful for in-line program documentation
(such as Python docstrings), for quickly creating simple web pages, and for
standalone documents.
.
The purpose of the Docutils project is to create a set of tools for
processing reStructuredText documentation into useful formats, such as HTML,
LaTeX, ODT or Unix manpages.
.
This package includes Python 3 modules and command line utilities.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://docutils.sourceforge.net/
Package: libgdk-pixbuf2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gdk-pixbuf
Version: 2.36.11-2
Depends: libc6 (>= 2.4), libgdk-pixbuf2.0-0 (= 2.36.11-2), libglib2.0-0 (>= 2.48.0), gir1.2-gdkpixbuf-2.0 (= 2.36.11-2), libglib2.0-dev (>= 2.37.6), libx11-dev, libpng-dev (>= 1.6), libpng-dev (<< 1.7), shared-mime-info
Description: GDK Pixbuf library (development files)
The GDK Pixbuf library provides:
- Image loading and saving facilities.
- Fast scaling and compositing of pixbufs.
- Simple animation loading (ie. animated GIFs)
.
This package contains the header files which are needed for using GDK Pixbuf.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.gtk.org/
Package: cm-super-minimal
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 5816
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: cm-super
Version: 0.3.4-11
Replaces: cm-super (<< 0.3.3-6)
Depends: tex-common (>= 6), texlive-latex-recommended
Description: TeX font package (minimal version) with CM/EC in Type1 in T1, T2*, TS1, X2 enc
This package ships the 10pt version of the various fonts. For the full
set please install cm-super.
.
The CM-Super package contains Type 1 fonts converted from METAFONT
fonts and covers entire EC/TC, EC Concrete, EC Bright and LH fonts
(Computer Modern font families). All European and Cyrillic writings
are covered. Each Type 1 font program contains ALL glyphs from the
following standard LaTeX font encodings: T1, TS1, T2A, T2B, T2C, X2,
and also Adobe StandardEncoding (585 glyphs per non-SC font and 468
glyphs per SC font), and could be reencoded to any of these encodings
using standard dvips or pdftex facilities (the corresponding support
files are also included).
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Package: node-read
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.7-1
Depends: nodejs, node-mute-stream
Description: Read user input from stdin module for Node.js
node-read extends Node.js readline.question builtin method with options
like silent input, replaced input, timeout or default value.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/read
Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1929
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.19.0.5ubuntu2.4
Depends: perl:any, libdpkg-perl (= 1.19.0.5ubuntu2.4), tar (>= 1.28-1), bzip2, xz-utils, patch (>= 2.7), make, binutils
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg | gnupg2, gpgv | gpgv2, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: debhelper (<< 10.10.1~)
Conffiles:
/etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
/etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
This package provides the development tools (including dpkg-source)
required to unpack, build and upload Debian source packages.
.
Most Debian source packages will require additional tools to build;
for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: gir1.2-glib-2.0
Status: install ok installed
Priority: important
Section: introspection
Installed-Size: 630
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.56.1-1
Provides: gir1.2-gio-2.0 (= 1.56.1-1), gir1.2-girepository-2.0 (= 1.56.1-1), gir1.2-gmodule-2.0 (= 1.56.1-1), gir1.2-gobject-2.0 (= 1.56.1-1)
Depends: libgirepository-1.0-1 (>= 1.45.4), libglib2.0-0 (>= 2.56.1)
Description: Introspection data for GLib, GObject, Gio and GModule
GObject Introspection is a project for providing machine readable
introspection data of the API of C libraries. This introspection
data can be used in several different use cases, for example
automatic code generation for bindings, API verification and documentation
generation.
.
GObject Introspection contains tools to generate and handle the
introspection data.
.
This package contains the introspection data for the GLib, GObject,
GModule and Gio libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection
Package: x11proto-xext-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2018.4-4
Depends: x11proto-dev
Description: transitional dummy package
This is a transitional dummy package, it can be safely removed.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org/
Package: libjpeg-turbo8-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 788
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1.5.2-0ubuntu5.18.04.6
Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev (<< 8c-2ubuntu5), libturbojpeg0-dev (<< 1.5.2-0ubuntu2)
Provides: libjpeg-dev
Depends: libc-dev, libjpeg-turbo8 (= 1.5.2-0ubuntu5.18.04.6)
Conflicts: libjpeg62-dev, libjpeg7-dev
Description: Development files for the IJG JPEG library
The Independent JPEG Group's JPEG library is a library for handling
JPEG files.
.
This package contains the static library, headers and documentation.
Homepage: http://libjpeg-turbo.virtualgl.org/
Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.1.15-1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
Xcursor is a simple library designed to help locate and load cursors for the
X Window System. Cursors can be loaded from files or memory and can exist in
several sizes; the library automatically picks the best size. When using
images loaded from files, Xcursor prefers to use the Render extension's
CreateCursor request for rendering cursors. Where the Render extension is
not supported, Xcursor maps the cursor image to a standard X cursor and uses
the core X protocol CreateCursor request.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org
Package: patch
Status: install ok installed
Priority: standard
Section: vcs
Installed-Size: 238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6-2ubuntu1.1
Depends: libc6 (>= 2.17)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
Patch will take a patch file containing any of the four forms
of difference listing produced by the diff program and apply
those differences to an original file, producing a patched
version.
Homepage: http://savannah.gnu.org/projects/patch/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libglib2.0-data
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.56.4-0ubuntu0.18.04.9
Description: Common files for GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package is needed for the runtime libraries to display messages in
languages other than English.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.5-1ubuntu2.5
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
/etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
/etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
/etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
/etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
/etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
/etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
/etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
This package includes passwd, chsh, chfn, and many other programs to
maintain password and group data.
.
Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.51
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
This package contains helper tools that are necessary for switching between
the various init systems that Debian contains (e. g. sysvinit or
systemd). An example is deb-systemd-helper, a script that enables systemd unit
files without depending on a running systemd.
.
It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
provide an abstraction for enabling, disabling, starting, and stopping
services for all supported Debian init systems as specified by the policy.
.
While this package is maintained by pkg-systemd-maintainers, it is NOT
specific to systemd at all. Maintainers of other init systems are welcome to
include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 881
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.6p1-4ubuntu0.5
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:7.6p1-4ubuntu0.5), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.26), libcom-err2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.2), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Recommends: libpam-systemd, ncurses-term, xauth, ssh-import-id
Suggests: molly-guard, monkeysphere, rssh, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
/etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
/etc/init.d/ssh 64d52dbd33144a38e8d4a837f6cec726
/etc/network/if-up.d/openssh-server 12a34c77b9032e5b23a63782fcc03fef
/etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
/etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the sshd server.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
sshd replaces the insecure rshd program, which is obsolete for most
purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.21-2
Depends: libc6 (>= 2.17), libudev1 (>= 183)
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
This package contains what you need to run programs that use this
library.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.libusb.info
Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-5
Depends: perl (>= 5.26.1-4), perlapi-5.26.1, libc6 (>= 2.14), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
excellent but not very well-known Algorithm::LCS module, with a drop-in
interface identical to Algorithm::Diff.
.
Note that only the LCSidx function is optimized in XS at the moment, which
means only compact_diff will get significantly faster for large data sets,
while diff and sdiff will run in identical speed as Algorithm::Diff.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Diff-XS
Package: libxdmcp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libxdmcp6 (= 1:1.1.2-3), x11proto-core-dev
Description: X11 authorisation library (development headers)
This package provides the main interface to the X11 display manager control
protocol library, which allows for remote logins to display managers.
.
This package contains the development headers for the library found in
libxdmcp6. Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: python3-debconf
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.66
Replaces: debconf (<< 1.5.64)
Depends: debconf (= 1.5.66), python3:any (>= 3.3.2-2~)
Breaks: debconf (<< 1.5.64)
Description: interact with debconf from Python 3
Debconf is a configuration management system for debian packages. Packages
use Debconf to ask questions when they are installed.
.
This package provides a debconf module to allow Python 3 programs to
interact with a debconf frontend.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Package: libpolkit-backend-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-20ubuntu0.18.04.6
Depends: libc6 (>= 2.4), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-20ubuntu0.18.04.6), libsystemd0 (>= 213)
Description: PolicyKit backend API
PolicyKit is a toolkit for defining and handling the policy that
allows unprivileged processes to speak to privileged processes.
.
This package contains a library for implementing authentication backends.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libunwind8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunwind
Version: 1.2.1-8
Replaces: libgcc1 (<< 1:4.0.0-2)
Depends: libc6 (>= 2.4), liblzma5 (>= 5.1.1alpha+20110809)
Conflicts: libunwind1-dev
Description: library to determine the call-chain of a program - runtime
The primary goal of this project is to define a portable and efficient C
programming interface (API) to determine the call-chain of a program.
The API additionally provides the means to manipulate the preserved
(callee-saved) state of each call-frame and to resume execution at any
point in the call-chain (non-local goto). The API supports both local
(same-process) and remote (across-process) operation. As such, the API
is useful in a number of applications.
.
This package includes the shared libraries
Original-Maintainer: Adrian Bunk <bunk@debian.org>
Homepage: http://www.nongnu.org/libunwind
Package: python3-future
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1651
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-future
Version: 0.15.2-4+ubuntu18.04.1+certbot+3
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-future-doc
Description: Clean single-source support for Python 3 and 2 - Python 3.x
Future is the missing compatibility layer between Python 2 and Python 3. It
allows one to use a single, clean Python 3.x-compatible codebase to support
both Python 2 and Python 3 with minimal overhead.
.
The imports have no effect on Python 3. On Python 2, they shadow the
corresponding builtins, which normally have different semantics on Python 3
versus 2, to provide their Python 3 semantics.
.
This package contains the Python 3.x module.
Homepage: https://python-future.org
Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: openssh
Version: 1:7.6p1-4ubuntu0.5
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:7.6p1-4ubuntu0.5), libc6 (>= 2.26)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the SFTP server module for the SSH server. It
is needed if you want to access your SSH server with SFTP. The SFTP
server module also works with other SSH daemons like dropbear.
.
OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
protocol described in:
.
http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
.
Newer versions of the draft will not be supported, though some features
are individually implemented as extensions.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: libjpeg8-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu8
Depends: libjpeg-turbo8-dev (>= 1.1.90+svn722-1ubuntu6), libjpeg8 (= 8c-2ubuntu8)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
libjpeg8-dev dependency package, depending on libjpeg-turbo8-dev.
Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
/etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains terminfo data files to support the most common types of
terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: krb5-locales
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.16-2ubuntu0.4
Description: internationalization support for MIT Kerberos
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3629
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1.5
Depends: libc6 (>> 2.27), libc6 (<< 2.28)
Suggests: manpages
Conffiles:
/etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
/etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
/etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
/etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
/etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
This package contains utility programs related to the GNU C Library.
.
* catchsegv: catch segmentation faults in programs
* getconf: query system configuration variables
* getent: get entries from administrative databases
* iconv, iconvconfig: convert between character encodings
* ldd, ldconfig: print/configure shared library dependencies
* locale, localedef: show/generate locale definitions
* tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.110-5ubuntu0.1
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
This library enables userspace to use Linux kernel asynchronous I/O
system calls, important for the performance of databases and other
advanced applications.
.
This package contains the shared library.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://pagure.io/libaio
Package: php5.6-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 139
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-gd
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.4), libgd3 (>= 2.1.1), libxpm4
Description: GD module for PHP
This package provides the GD module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libsemanage1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.7-2build2
Depends: libsemanage-common (= 2.7-2build2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.7), libsepol1 (>= 2.7)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
This package provides the shared libraries for SELinux policy management.
It uses libsepol for binary policy manipulation and libselinux for
interacting with the SELinux system. It also exec's helper programs
for loading policy and for checking whether the file_contexts
configuration is valid (load_policy and setfiles from
policycoreutils) presently, although this may change at least for the
bootstrapping case
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: gir1.2-harfbuzz-0.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 1.7.2-1ubuntu1
Depends: gir1.2-glib-2.0, libharfbuzz0b (>= 1.6.0)
Description: OpenType text shaping engine (GObject introspection data)
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains introspection data for the GObject bindings library.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: linux-aws-headers-4.15.0-1021
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 76806
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws
Version: 4.15.0-1021.21
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 4.15.0
This package provides kernel header files for version 4.15.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-headers-4.15.0-1021/debian.README.gz for details
Package: libjpeg-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu8
Depends: libjpeg8-dev
Description: Independent JPEG Group's JPEG runtime library (dependency package)
This package will always depend on the current default JPEG library
development package version.
Package: libsocket6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.27-1build2
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.14)
Description: Perl extensions for IPv6
The Socket6 module supports getaddrinfo() and getnameinfo() to intend
to enable protocol independent programming. If your environment
supports IPv6, IPv6 related defines such as AF_INET6 are included.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Socket6
Package: php-cli-prompt
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.3+dfsg-1
Depends: php-common
Description: tiny helper prompting for user input
Allows you to prompt for user input on the command line, and optionally hide
the characters they type.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/Seldaek/cli-prompt
Package: libfreetype6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 6018
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.8.1-2ubuntu2.2
Depends: libfreetype6 (= 2.8.1-2ubuntu2.2), libc6-dev | libc-dev, zlib1g-dev | libz-dev, libpng-dev
Description: FreeType 2 font engine, development files
The FreeType project is a team of volunteers who develop free,
portable and high-quality software solutions for digital typography.
They specifically target embedded systems and focus on bringing small,
efficient and ubiquitous products.
.
This package contains all supplementary files (static library, headers
and documentation) you need to develop your own programs using the
FreeType 2 library.
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libatm1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-2build1
Depends: libc6 (>= 2.14)
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://linux-atm.sourceforge.net/
Package: linux-modules-5.4.0-1058-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69540
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1058.61~18.04.3
Config-Version: 5.4.0-1058.61~18.04.3
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: patchutils
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.3.4-2
Depends: libc6 (>= 2.14), perl:any, patch, debianutils (>= 1.16)
Description: Utilities to work with patches
This package includes the following utilities:
- combinediff creates a cumulative patch from two incremental patches
- dehtmldiff extracts a diff from an HTML page
- filterdiff extracts or excludes diffs from a diff file
- fixcvsdiff fixes diff files created by CVS that "patch" mis-interprets
- flipdiff exchanges the order of two patches
- grepdiff shows which files are modified by a patch matching a regex
- interdiff shows differences between two unified diff files
- lsdiff shows which files are modified by a patch
- recountdiff recomputes counts and offsets in unified context diffs
- rediff and editdiff fix offsets and counts of a hand-edited diff
- splitdiff separates out incremental patches
- unwrapdiff demangles patches that have been word-wrapped
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: http://cyberelk.net/tim/patchutils/index.html
Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 442
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-oauthlib
Version: 2.0.6-1
Depends: python3:any (>= 3.4~), python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
OAuthLib is a generic utility which implements the logic of OAuth without
assuming a specific HTTP request object. It can be used to graft OAuth support
onto HTTP libraries.
.
OAuth1 is almost complete while OAuth2 is already in the works.
.
This package contains the Python 3 version of the library.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/idan/oauthlib
Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20180223.1310-1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
A machine-readable list of domain name suffixes that accept public
registration. Each suffix represents the part of a domain name which
is not under the control of the individual registrant, which makes
the list useful for grouping cookies, deciding same-origin policies,
collating spam, and other activities.
Original-Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Homepage: https://publicsuffix.org
Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.4.3-1
Depends: libc6 (>= 2.7)
Description: OpenGL function pointer management library
It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
eglGetProcAddress(), etc. from the app developer, with very little
knowledge needed on their part. They get to read GL specs and write
code using undecorated function names like glCompileShader().
Original-Maintainer: Jérémy Lal <kapouer@melix.org>
Homepage: https://github.com/anholt/libepoxy
Package: gyp
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.1+20150913git1f374df9-1ubuntu1
Depends: python (>= 2.7), python (<< 2.8), python-pkg-resources
Description: Cross-platform build script generator
GYP (Generate Your Projects) is a tool to generate native Visual Studio,
Xcode, SCons and make build files from a description of a project in a
simple JSON-inspired format. Its syntax is a universal cross-platform
build representation that still allows sufficient per-platform flexibility
to accommodate irreconcilable differences.
Homepage: https://chromium.googlesource.com/external/gyp/
Original-Maintainer: Debian Chromium Maintainers <pkg-chromium-maint@lists.alioth.debian.org>
Package: libseccomp2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.5.1-1ubuntu1~18.04.2
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
This library provides a high level interface to constructing, analyzing
and installing seccomp filters via a BPF passed to the Linux Kernel's
prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <kees@debian.org>
Package: libperl5.26
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21405
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.26.1-6ubuntu0.7
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.074), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 5.96), libencode-perl (<< 2.94), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.62), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.15), libthreads-shared-perl (<< 1.56), libtime-hires-perl (<< 1.9741), libtime-piece-perl (<< 1.31), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm-compat4, libgdbm5 (>= 1.12), zlib1g (>= 1:1.2.2.3), perl-modules-5.26 (>= 5.26.1-6ubuntu0.7)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.074), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 5.96), libencode-perl (<< 2.94), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.62), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.15), libthreads-shared-perl (<< 1.56), libtime-hires-perl (<< 1.9741), libtime-piece-perl (<< 1.31), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
This package contains the shared Perl library, used by applications
which embed a Perl interpreter.
.
It also contains the architecture-dependent parts of the standard
library (and depends on perl-modules-5.26 which contains the
architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Package: libxtables12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.1-2ubuntu2
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.14)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20180224.1
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
This package installs an up-to-date version of config.guess and
config.sub, used by the automake and libtool packages. It provides
the canonical copy of those files for other packages as well.
.
It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
best practices and guidelines for using autoconf, automake and
friends on Debian packages. This is a must-read for any developers
packaging software that uses the GNU autotools, or GNU gettext.
.
Additionally this package provides seamless integration into Debhelper
or CDBS, allowing maintainers to easily update config.{guess,sub} files
in their packages.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Homepage: http://savannah.gnu.org/projects/config/
Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 7740
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 237-3ubuntu10.57
Replaces: systemd (<< 233-4)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.27), libkmod2 (>= 5~), libselinux1 (>= 2.1.9), adduser, libudev1 (= 237-3ubuntu10.57), lsb-base (>= 3.0-6), util-linux (>= 2.27.1), procps
Breaks: ifplugd (<< 0.28-19.1~), ifupdown (<< 0.8.5~), joystick (<< 1:1.4.9-1~), systemd (<< 233-4)
Conflicts: hal
Conffiles:
/etc/init.d/udev c7723dd7bb64ea6711974e3fd584c81c
/etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: dh-exec
Status: install ok installed
Priority: extra
Section: devel
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.23build1
Depends: libc6 (>= 2.14), libpipeline1 (>= 1.0.0), perl:any, perl (>= 5.14.2~), debhelper (>= 9.20151004~), libdpkg-perl (>= 1.17.14~)
Description: Scripts to help with executable debhelper files
Debhelper (in compat level 9 and above) allows its config files to be
executable, and uses the output of such scripts as if it was the
content of the config file.
.
To ease and standardize the most common tasks, this package provides
a few solutions to help constructing such executable scripts:
.
* A way to ease variable substitution, from environment variables or
dpkg-architecture.
* Ability to filter files by architecture or build profile, within a
single debhelper control file.
* An extension to dh_install and dh_installman, with the ability to
rename files.
Original-Maintainer: Gergely Nagy <algernon@madhouse-project.org>
Homepage: https://github.com/algernon/dh-exec
Package: linux-modules-5.4.0-1089-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69606
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1089.97~18.04.1
Config-Version: 5.4.0-1089.97~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libapparmor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 2.12-4ubuntu5.3
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
libapparmor1 provides the shared library used for making use
of the AppArmor profile and changehat functionality, as well as common
log parsing routines.
Homepage: http://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1597
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.6.1-2ubuntu2
Depends: libip4tc0 (= 1.6.1-2ubuntu2), libip6tc0 (= 1.6.1-2ubuntu2), libiptc0 (= 1.6.1-2ubuntu2), libxtables12 (= 1.6.1-2ubuntu2), libc6 (>= 2.14), libnetfilter-conntrack3, libnfnetlink0
Suggests: kmod
Description: administration tools for packet filtering and NAT
iptables is the userspace command line program used to configure
the Linux packet filtering ruleset. It is targeted towards system
administrators. Since Network Address Translation is also configured
from the packet filter ruleset, iptables is used for this, too. The
iptables package also includes ip6tables. ip6tables is used for
configuring the IPv6 packet filter
Homepage: http://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: libexif-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 497
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libexif
Version: 0.6.21-4ubuntu0.6
Depends: libc6-dev, libexif12 (= 0.6.21-4ubuntu0.6)
Recommends: libexif-doc (= 0.6.21-4ubuntu0.6)
Description: library to parse EXIF files (development files)
Most digital cameras produce EXIF files, which are JPEG files with
extra tags that contain information about the image. The EXIF library
allows you to parse an EXIF file and read the data from those tags.
.
This package contains the development files.
Homepage: http://libexif.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 499
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.4.45+dfsg-1ubuntu1.11
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.14), libgnutls30 (>= 3.5.6), libgssapi3-heimdal (>= 1.4.0+git20110226), libsasl2-2, libldap-common (>= 2.4.45+dfsg-1ubuntu1.11)
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
These are the run-time libraries for the OpenLDAP (Lightweight Directory
Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Package: iputils-tracepath
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: iputils
Version: 3:20161105-1ubuntu2
Depends: libc6 (>= 2.15), libcap2 (>= 1:2.10), libidn11 (>= 1.13)
Suggests: traceroute
Description: Tools to trace the network path to a remote host
The tracepath utility is similar to the traceroute utility, but also
attempts to discover the MTU of the path. Supports IPv4 and IPv6.
Original-Maintainer: Noah Meyerhans <noahm@debian.org>
Package: python3-pexpect
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 185
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pexpect
Version: 4.2.1-1
Depends: python3-ptyprocess, python3:any (>= 3.3.2-2~)
Suggests: python-pexpect-doc
Description: Python 3 module for automating interactive applications
Pexpect is a pure Python 3 module for spawning child applications;
controlling them; and responding to expected patterns in their
output. Pexpect works like Don Libes' Expect. Pexpect allows your
script to spawn a child application and control it as if a human were
typing commands.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://www.noah.org/wiki/Pexpect
Package: nplan
Status: install ok installed
Priority: important
Section: net
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: netplan.io
Version: 0.40.1~18.04.4
Depends: netplan.io
Description: YAML network configuration abstraction - transitional package
netplan reads YAML network configuration files which are written
by administrators, installers, cloud image instantiations, or other OS
deployments. During early boot it then generates backend specific
configuration files in /run to hand off control of devices to a particular
networking daemon.
.
This is a transitional package that installs 'netplan.io'.
Package: libice-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.9-2ubuntu0.18.04.1
Depends: libice6 (= 2:1.0.9-2ubuntu0.18.04.1), x11proto-core-dev
Suggests: libice-doc
Description: X11 Inter-Client Exchange library (development headers)
This package provides the main interface to the X11 Inter-Client Exchange
library, which allows for communication of data between X clients.
.
This package contains the development headers for the library found in libice6.
Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libpixman-1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 937
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.34.0-2ubuntu0.1
Depends: libpixman-1-0 (= 0.34.0-2ubuntu0.1)
Description: pixel-manipulation library for X and cairo (development files)
Development libraries, header files and documentation needed by
programs that want to compile with the Cairo/X pixman library.
Homepage: http://pixman.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 410
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: chardet
Version: 3.0.4-1
Depends: python3:any (>= 3.3.2-2~), python3-pkg-resources
Description: universal character encoding detector for Python3
Chardet takes a sequence of bytes in an unknown character encoding, and
attempts to determine the encoding.
.
Supported encodings:
* ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
* Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
Chinese)
* EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
* EUC-KR, ISO-2022-KR (Korean)
* KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
* ISO-8859-2, windows-1250 (Hungarian)
* ISO-8859-5, windows-1251 (Bulgarian)
* windows-1252 (English)
* ISO-8859-7, windows-1253 (Greek)
* ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
* TIS-620 (Thai)
.
This library is a port of the auto-detection code in Mozilla.
.
This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet
Package: node-json-stringify-safe
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.0.0-1
Depends: nodejs
Description: JSON.stringify with circular references module for Node.js
node-json-stringify-safe provides a serializer or a wrapper for
JSON.stringify to be able to customize how to deal with circular
references in the object being serialized, instead of throwing an
exception.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/json-stringify-safe
Package: btrfs-progs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.15.1-1build1
Replaces: btrfs-tools (<< 4.4.1-1)
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), liblzo2-2, libuuid1 (>= 2.16), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.2.0)
Suggests: duperemove
Breaks: btrbk (<= 0.25.0), btrfs-tools (<< 4.4.1-1)
Description: Checksumming Copy on Write Filesystem utilities
Btrfs is a new copy on write filesystem for Linux aimed at implementing
advanced features while focusing on fault tolerance, repair and easy
administration.
.
This package contains utilities (mkfs, fsck) used to work with btrfs
and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Homepage: http://btrfs.wiki.kernel.org/
Original-Maintainer: Dimitri John Ledkov <xnox@debian.org>
Package: sosreport
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2708
Maintainer: Eric Desrochers <slashd@ubuntu.com>
Architecture: amd64
Version: 4.3-1ubuntu0.18.04.2
Depends: python3-pexpect, python3:any (>= 3.3.2-2~)
Conffiles:
/etc/sos/sos.conf afbb6b104e5e905315fb573db86c1e0b
/etc/sos.conf ee501054a13f29cb3109a4e92da34723 obsolete
Description: Set of tools to gather troubleshooting data from a system
Sos is a set of tools that gathers information about system
hardware and configuration. The information can then be used for
diagnostic purposes and debugging. Sos is commonly used to help
support technicians and developers.
Homepage: https://github.com/sosreport/sos
Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 220
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.73-1
Depends: perl:any
Suggests: libwww-perl
Description: module to manipulate and access URI strings
URI is a collection of Perl modules that represent and manipulate Uniform
Resource Identifier (URI) references as specified in RFC 2396.
.
URI objects can be used to access and manipulate the various components
that make up these strings. There are also methods to combine URIs in
various ways.
.
The URI class replaces the URI::URL class that used to be distributed with
libwww-perl. This package also includes an emulation of the old URI::URL
interface, which implements both the old and the new interface.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/URI
Package: gir1.2-rsvg-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.40.20-2ubuntu0.2
Depends: gir1.2-freedesktop (>= 0.10.8), gir1.2-gdkpixbuf-2.0 (>= 2.23.5-2), gir1.2-glib-2.0 (>= 0.10.8), librsvg2-2 (>= 2.40.20)
Description: gir files for renderer library for SVG files
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
.
This package contains gobject introspection information.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 12072
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02-2ubuntu8.25
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4)
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.4-1.4), liblzma5 (>= 5.1.1alpha+20120614), gettext-base, lsb-base (>= 3.0-6)
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conffiles:
/etc/bash_completion.d/grub b269c1383a87a7da2cc309c929ba35ca
/etc/grub.d/00_header 1788ccfbd17ca8cf32f9e6583172314e
/etc/grub.d/05_debian_theme 1b68d93d4dd2dacf7b62a7d0937baa74
/etc/grub.d/10_linux fff4787cb357cff8cb57628613a03625
/etc/grub.d/20_linux_xen da479977add15537c62855985e57200d
/etc/grub.d/30_os-prober 3edebc4e0527e0c6e4d1f2e65c288d42
/etc/grub.d/30_uefi-firmware f86dfa1725733e0f96436c0c7358004a
/etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
/etc/grub.d/41_custom 7bb4eb43ee7cb6d6f52df3dd2bde84e9
/etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
/etc/init.d/grub-common 561b38cf0171ef9aa41954dad9ec6b3c
/etc/pm/sleep.d/10_grub-common bc63b0c6613e95979446d17a88875d6a
Description: GRand Unified Bootloader (common files)
This package contains common files shared by the distinct flavours of GRUB.
It is shared between GRUB Legacy and GRUB 2, although a number of files
specific to GRUB 2 are here as long as they do not break GRUB Legacy.
Homepage: http://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Package: kbd
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.4-2ubuntu1
Provides: console-utilities
Depends: libc6 (>= 2.14), console-setup | console-setup-mini
Conflicts: console-utilities
Description: Linux console font and keytable utilities
This package allows you to set up the Linux console, change the font,
resize text mode virtual consoles and remap the keyboard.
.
You will probably want to install a set of data files, such as the one
in the “console-setup” package.
Homepage: http://www.kbd-project.org/
Original-Maintainer: Console utilities maintainers <pkg-kbd-devel@lists.alioth.debian.org>
Package: linux-modules-5.4.0-1069-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69675
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1069.73~18.04.1
Config-Version: 5.4.0-1069.73~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-systemd
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-systemd
Version: 234-1build1
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.17), libsystemd0 (>= 233)
Description: Python 3 bindings for systemd
This package contains Python 3 bindings for native access to the
systemd facilities.
.
Functionality is separated into a number of modules:
* systemd.journal supports sending of structured messages to the
journal and reading journal files
* systemd.daemon wraps parts of libsystemd useful for writing daemons
and socket activation
* systemd.id128 provides functions for querying machine and boot
identifiers and a list of message identifiers provided by systemd
* systemd.login wraps parts of libsystemd used to query logged in
users and available seats and machines
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Package: linux-image-5.4.0-1051-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9270
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1051.53~18.04.1
Config-Version: 5.4.0-1051.53~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1051-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1051-aws
Conflicts: linux-image-unsigned-5.4.0-1051-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: t1utils
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 286
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.41-2
Depends: libc6 (>= 2.14)
Description: Collection of simple Type 1 font manipulation programs
The t1utils tools allow you to convert between PFA (ASCII) and PFB
(binary) formats; disassemble PFA or PFB files into human-readable
form; and reassemble the human-readable files into PFA or PFB format
files. You can also extract font resources from a Macintosh font
file (ATM/Laserwriter), or create a Macintosh Type 1 font file from a
PFA or PFB font.
.
There are currently six programs:
.
t1ascii Converts PFB files to PFA format.
.
t1binary Converts PFA files to PFB format.
.
t1disasm Disassembles a Type 1 font (PFA or PFB format) into a raw,
human-readable text form for subsequent hand editing,
tweaking, hint fixing, etcetera...
.
t1asm Assembles a Type 1 font into PFA or PFB format from
the human-readable form produced by t1disasm.
.
t1unmac Extracts POST resources from a Macintosh Type 1 font file
(ATM/Laserwriter) into PFA or PFB format for use outside
the Macintosh environment. The Macintosh file should be
stored in MacBinary, AppleSingle, AppleDouble, or BinHex
format, or as a raw resource fork. Note that t1unmac does
not have to run on a Macintosh, but makes Macintosh Type 1
fonts available for use on Unix machines and PCs.
.
t1mac Creates a Macintosh Type 1 file from a PFA- or PFB-format
Type 1 font. Writes the Macintosh file in MacBinary,
AppleSingle, AppleDouble, or BinHex format, or as a raw
resource fork. WARNING: This tool will not suffice to
allow you to use the new font on a Macintosh, as
Macintoshes cannot read raw Type 1 fonts. You will need
to create a font suitcase containing bitmap fonts. If you
do not already have such a suitcase for the font, T1utils
will not help you create one.
Original-Maintainer: Niels Thykier <niels@thykier.net>
Homepage: https://www.lcdf.org/type/
Package: linux-image-5.4.0-1057-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9315
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1057.60~18.04.1
Config-Version: 5.4.0-1057.60~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1057-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1057-aws
Conflicts: linux-image-unsigned-5.4.0-1057-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.4.0-1025-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9065
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1025.25~18.04.1
Config-Version: 5.4.0-1025.25~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1025-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1025-aws
Conflicts: linux-image-unsigned-5.4.0-1025-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libssl1.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3932
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.1.1d-1+ubuntu18.04.1+deb.sury.org+2
Depends: libc6 (>= 2.25), debconf (>= 0.5) | debconf-2.0
Breaks: isync (<< 1.3.0-2), lighttpd (<< 1.4.49-2), python-boto (<< 2.44.0-1.1), python-httplib2 (<< 0.11.3-1), python-imaplib2 (<< 2.57-5), python3-boto (<< 2.44.0-1.1), python3-imaplib2 (<< 2.57-5)
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Package: libatk1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: atk1.0
Version: 2.28.1-1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.55.2), libatk1.0-data (>= 2.28.1-1)
Description: ATK accessibility toolkit
ATK is a toolkit providing accessibility interfaces for applications or
other toolkits. By implementing these interfaces, those other toolkits or
applications can be used with tools such as screen readers, magnifiers, and
other alternative input devices.
.
This is the runtime part of ATK, needed to run applications built with it.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Accessibility
Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.10ubuntu1
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
This package contains the important System-V-like utilities.
.
Specifically, this package includes:
killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Package: xz-utils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 428
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.2-1.3ubuntu0.1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
This package provides the command line tools for working with XZ
compression, including xz, unxz, xzcat, xzgrep, and so on. They can
also handle the older LZMA format, and if invoked via appropriate
symlinks will emulate the behavior of the commands in the lzma
package.
.
The XZ format is similar to the older LZMA format but includes some
improvements for general use:
.
* 'file' magic for detecting XZ files;
* crc64 data integrity check;
* limited random-access reading support;
* improved support for multithreading (not used in xz-utils);
* support for flushing the encoder.
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: libtext-iconv-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7-5build6
Depends: libc6 (>= 2.4), perl-base (>= 5.26.0-4), perlapi-5.26.0
Description: converts between character sets in Perl
The iconv() family of functions from XPG4 defines an API for converting
between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
are provided by libc6.
.
This package allows access to them from Perl via the Text::Iconv
package.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::Iconv
Package: libxext-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 287
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.3-1
Depends: libxext6 (= 2:1.3.3-1), x11proto-core-dev, x11proto-xext-dev (>= 7.0.99.2), libx11-dev
Suggests: libxext-doc
Description: X11 miscellaneous extensions library (development headers)
libXext provides an X Window System client interface to several extensions to
the X protocol.
.
The supported protocol extensions are:
- DOUBLE-BUFFER (DBE), the Double Buffer extension;
- DPMS, the VESA Display Power Management System extension;
- Extended-Visual-Information (EVI), an extension for gathering extra
information about the X server's visuals;
- LBX, the Low Bandwidth X extension;
- MIT-SHM, the MIT X client/server shared memory extension;
- MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
- Multi-Buffering, the multi-buffering and stereo display extension;
- SECURITY, the X security extension;
- SHAPE, the non-rectangular shaped window extension;
- SYNC, the X synchronization extension;
- TOG-CUP, the Open Group's Colormap Utilization extension;
- XC-APPGROUP, the X Consortium's Application Group extension;
- XC-MISC, the X Consortium's resource ID querying extension;
- XTEST, the X test extension (this is one of two client-side
implementations; the other is in the libXtst library, provided by the
libxtst6 package);
.
libXext also provides a small set of utility functions to aid authors of
client APIs for X protocol extensions.
.
This package contains the development headers for the library found in
libxext6. Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 161
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netkit-telnet
Version: 0.17-41
Replaces: netstd
Provides: telnet-client
Depends: netbase, libc6 (>= 2.15), libstdc++6 (>= 5)
Description: basic telnet client
The telnet command is used for interactive communication with another host
using the TELNET protocol.
.
For the purpose of remote login, the present client executable should be
depreciated in favour of an ssh-client, or in some cases with variants like
telnet-ssl or Kerberized TELNET clients. The most important reason is that
this implementation exchanges user name and password in clear text.
.
On the other hand, the present program does satisfy common use cases of
network diagnostics, like protocol testing of SMTP services, so it can
become handy enough.
Original-Maintainer: Mats Erik Andersson <mats.andersson@gisladisker.se>
Package: libaprutil1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-2ubuntu0.1
Depends: libapr1 (>= 1.6.2), libc6 (>= 2.25), libdb5.3, libexpat1 (>= 2.0.1), libgdbm5 (>= 1.14), libssl1.1 (>= 1.1.0)
Breaks: libapr1 (<< 1.4.8-2~)
Description: Apache Portable Runtime Utility Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2ubuntu0.18.04.2
Depends: libc6 (>= 2.14), libwebp6 (>= 0.5.1)
Description: Lossy compression of digital photographic images.
Image Compression format, based on the VP8 codec.
WebP uses the modern VP8 compression format to deliver efficient
compression of images for the web. More than 30% extra gain over
optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Package: libheimbase1-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libc6 (>= 2.14)
Description: Heimdal Kerberos - Base library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the base library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: node-inherits
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.0.3-1
Depends: libjs-inherits (= 2.0.3-1), nodejs
Description: Exposes inherits function from Node.js environment
node-inherits exposes standard inherits implementation of Node.js util
module, and allows bundlers such as browserify to not include full util
package in client code.
.
It is recommended to use this module for all code that requires only
the inherits function and that has a chance to run in a browser too.
.
This is the Node.js module.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/inherits
Package: linux-image-5.4.0-1034-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9139
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1034.35~18.04.1
Config-Version: 5.4.0-1034.35~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1034-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1034-aws
Conflicts: linux-image-unsigned-5.4.0-1034-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 481
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: jinja2
Version: 2.10-1ubuntu0.18.04.1
Depends: python3-markupsafe, python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: python-jinja2-doc
Description: small but fast and easy to use stand-alone template engine
Jinja2 is a template engine written in pure Python. It provides a Django
inspired non-XML syntax but supports inline expressions and an optional
sandboxed environment.
.
The key-features are:
* Configurable syntax. If you are generating LaTeX or other formats with
Jinja2 you can change the delimiters to something that integrates better
into the LaTeX markup.
* Fast. While performance is not the primarily target of Jinja2 it’s
surprisingly fast. The overhead compared to regular Python code was reduced
to the very minimum.
* Easy to debug. Jinja2 integrates directly into the Python traceback system
which allows you to debug Jinja2 templates with regular Python debugging
helpers.
* Secure. It’s possible to evaluate untrusted template code if the optional
sandbox is enabled. This allows Jinja2 to be used as templating language
for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Package: linux-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta-aws-5.4
Version: 5.4.0.1103.81
Provides: kernel-testing--linux-aws-5.4--full--aws, kernel-testing--linux-aws-5.4--full--preferred
Depends: linux-image-aws (= 5.4.0.1103.81), linux-headers-aws (= 5.4.0.1103.81)
Description: Complete Linux kernel for Amazon Web Services (AWS) systems.
This package will always depend on the latest complete Linux kernel available
for Amazon Web Services (AWS) systems.
Package: glib-networking
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.56.0-1ubuntu0.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.55.0), libgnutls30 (>= 3.5.6), libp11-kit0 (>= 0.20.0), libproxy1v5 (>= 0.4.14), glib-networking-services (>= 2.56.0-1ubuntu0.1), glib-networking-services (<< 2.56.0-1ubuntu0.1.1~), glib-networking-common (>= 2.56.0-1ubuntu0.1), gsettings-desktop-schemas
Description: network-related giomodules for GLib
This package contains various network related extensions for the GIO
library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.06-7.1
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
This module is a substitution for Text::Wrap, supporting
multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
characters such as east Asian characters, combining characters
such as diacritical marks and Thai, and languages which don't
use whitespaces between words such as Chinese and Japanese.
.
It provides wrap().
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::WrapI18N
Package: libsemanage-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.7-2build2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
/etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
This package provides the common files used by the shared libraries
for SELinux policy management.
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.22-2ubuntu1
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.14)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
/etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
fakeroot provides a fake "root environment" by means of LD_PRELOAD and
SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
stat(), and other file-manipulation functions, so that unprivileged
users can (for instance) populate .deb archives with root-owned files;
various build tools use fakeroot for this by default.
.
This package contains the LD_PRELOAD libraries.
Original-Maintainer: Clint Adams <clint@debian.org>
Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 73
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (73+ubuntu18.04.1+deb.sury.org+1)
Version: 2:73+ubuntu18.04.1+deb.sury.org+1
Depends: psmisc (>= 22.15-1~), sed (>= 4.1.1-1)
Breaks: php-amqp (<< 1.7.0~alpha2-4~), php-apcu (<< 5.1.3+4.0.10-2~), php-apcu-bc (<< 1.0.3-2~), php-ast (<< 0.1.1-2~), php-geoip (<< 1.1.0-4~), php-gmagick (<< 2.0.1~rc3+1.1.7~rc3-2~), php-igbinary (<< 1.2.1-10-ge0e66b9+1.2.1-2~), php-imagick (<< 3.4.0~rc6-2~), php-memcache (<< 3.0.9~20151130.fdbd46b-2~), php-memcached (<< 2.2.0-95-g6ace07d+2.2.0-2~), php-mongodb (<< 1.1.2-3~), php-msgpack (<< 2.0.0+0.5.7-2~), php-radius (<< 1.4.0~b1-2~), php-redis (<< 2.2.7-355-g799e0bc+2.2.7-4~), php-rrd (<< 2.0.0+1.1.3-4~), php-smbclient (<< 0.8.0~rc1-2~), php-ssh2 (<< 0.12-39-g3dfe336+0.12-2~), php-uploadprogress (<< 1.0.3.1-4-g95d8a0f-2~), php-uuid (<< 1.0.4-2~), php-xdebug (<< 2.4.0~rc4-2~), php-zmq (<< 1.1.3-3~), php5.6-common (<< 5.6.18+dfsg-10~), php5.6-json (<< 1.3.9-2~), php7.0-common (<< 7.0.3-11~)
Conffiles:
/etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
This package contains common utilities shared among all packaged PHP
versions.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 549
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg2 (<< 2.1.10-2)
Depends: gpgconf (= 2.2.4-1ubuntu1.6), libassuan0 (>= 2.0.1), libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), libksba8 (>= 1.3.4), libreadline7 (>= 6.0)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Breaks: gnupg2 (<< 2.1.10-2)
Description: GNU privacy guard - S/MIME version
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the gpgsm program. gpgsm is a tool to provide
digital encryption and signing services on X.509 certificates and the
CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libp11-kit0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.23.9-2ubuntu0.1
Depends: libc6 (>= 2.26), libffi6 (>= 3.0.4)
Breaks: opencryptoki (<= 3.6.1+dfsg-1)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
The p11-kit library provides a way to load and enumerate Public-Key
Cryptography Standard #11 modules, along with a standard configuration
setup for installing PKCS#11 modules so that they're discoverable. It
also solves problems with coordinating the use of PKCS#11 by different
components or libraries living in the same process.
.
This package contains the shared library required for applications loading
and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 404
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Depends: fontconfig (>= 2.1.91), libc6 (>= 2.14), libglib2.0-0 (>= 2.37.3), libthai0 (>= 0.1.22-3~)
Description: Layout and rendering of internationalized text
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the shared libraries.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: python3-minimal
Status: install ok installed
Priority: important
Section: python
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.6.7-1~18.04
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.6-minimal (>= 3.6.7-1~)
Description: minimal subset of the Python language (default python3 version)
This package contains the interpreter and some essential modules. It's used
in the boot process for some basic tasks.
See /usr/share/doc/python3.6-minimal/README.Debian for a list of the modules
contained in this package.
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: linux-image-5.3.0-1028-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9142
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1028.30~18.04.1
Config-Version: 5.3.0-1028.30~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1028-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1028-aws
Conflicts: linux-image-unsigned-5.3.0-1028-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.3.0-1030-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9155
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1030.32~18.04.1
Config-Version: 5.3.0-1030.32~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1030-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1030-aws
Conflicts: linux-image-unsigned-5.3.0-1030-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.4.0-1032-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9123
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1032.33~18.04.1
Config-Version: 5.4.0-1032.33~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1032-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1032-aws
Conflicts: linux-image-unsigned-5.4.0-1032-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: gdisk
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 783
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.3-1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libncursesw5 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
GPT fdisk (aka gdisk) is a text-mode partitioning
tool that works on Globally Unique Identifier
(GUID) Partition Table (GPT) disks, rather than
on the more common (through 2009)
Master Boot Record (MBR) partition tables.
Original-Maintainer: Guillaume Delacour <gui@iroqwa.org>
Homepage: http://sourceforge.net/projects/gptfdisk/
Package: ntfs-3g
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2017.3.23-2ubuntu0.18.04.5
Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.5.0), libntfs-3g88 (= 1:2017.3.23-2ubuntu0.18.04.5)
Pre-Depends: fuse
Description: read/write NTFS driver for FUSE
NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
filesystem used by Microsoft Windows.
Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libdebconfclient0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.213ubuntu1
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
Debconf is a configuration management system for Debian packages. It is
used by some packages to prompt you for information before they are
installed. cdebconf is a reimplementation of the original debconf in C.
.
This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-json-patch
Version: 1.19+really1.16-1fakesync1
Depends: python3-json-pointer (>= 1.9), python3:any (>= 3.3.2-2~)
Description: library to apply JSON patches - Python 3.x
Python-json-patch is a Python module (a library) to apply JSON Patches
according to the IETF draft specification.
.
From the IETF site:
.
JavaScript Object Notation (JSON) [RFC4627] is a common format for the
exchange and storage of structured data. HTTP PATCH [RFC5789] extends the
Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
modifications to resources.
.
JSON Patch is a format (identified by the media type "application/
json-patch") for expressing a sequence of operations to apply to a target JSON
document, suitable for use with the HTTP PATCH method.
.
This format is also potentially useful in other cases when it's necessary to
make partial updates to a JSON document.
.
This package provides the Python 3.x module.
Homepage: https://github.com/stefankoegl/python-json-patch
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.7-2build2
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
This package provides the shared libraries for Security-enhanced
Linux that provides interfaces (e.g. library functions for the
SELinux kernel APIs like getcon(), other support functions like
getseuserbyname()) to SELinux-aware applications. Security-enhanced
Linux is a patch of the Linux kernel and a number of utilities with
enhanced security functionality designed to add mandatory access
controls to Linux. The Security-enhanced Linux kernel contains new
architectural components originally developed to improve the security
of the Flask operating system. These architectural components provide
general support for the enforcement of many kinds of mandatory access
control policies, including those based on the concepts of Type
Enforcement, Role-based Access Control, and Multi-level Security.
.
libselinux1 provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions. Required for any applications that use the SELinux
API. libselinux may use the shared libsepol to manipulate the binary
policy if necessary (e.g. to downgrade the policy format to an older
version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: systemd
Status: install ok triggers-pending
Priority: important
Section: admin
Installed-Size: 12536
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 237-3ubuntu10.57
Replaces: udev (<< 228-5)
Depends: libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libcryptsetup12 (>= 2:1.4.3), libgpg-error0 (>= 1.14), libkmod2 (>= 5~), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libsystemd0 (= 237-3ubuntu10.57), util-linux (>= 2.27.1), mount (>= 2.26), adduser, procps
Pre-Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.27), libcap2 (>= 1:2.10), libcryptsetup12 (>= 2:1.4), libgcrypt20 (>= 1.8.0), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libseccomp2 (>= 2.3.1), libselinux1 (>= 2.1.9)
Recommends: libpam-systemd, dbus, networkd-dispatcher
Suggests: systemd-container, policykit-1
Breaks: apparmor (<< 2.9.2-1), ifupdown (<< 0.8.5~), laptop-mode-tools (<< 1.68~), systemd-shim (<< 10-3~), udev (<< 228-5)
Conflicts: systemd-shim, upstart
Conffiles:
/etc/dhcp/dhclient-enter-hooks.d/resolved 9920aaeaeceedd4babae46a8b6c6edf7
/etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
/etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696
/etc/systemd/journald.conf 5b3af70869d5a6449fe454c73f8fff99
/etc/systemd/logind.conf aeeac805b4bfb7450183ce346999dd38
/etc/systemd/resolved.conf 9e7ae2d59d69ab0c1241fd5d9c5512fe
/etc/systemd/system.conf 33654a446116028d8a1fca1dbb7ea7b0
/etc/systemd/timesyncd.conf dff71825daf78f541a22ea98d46df80e
/etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee
Description: system and service manager
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
Installing the systemd package will not switch your init system unless you
boot with init=/bin/systemd or install systemd-sysv in addition.
Triggers-Pending: /etc/init.d
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Package: mtr-tiny
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mtr
Version: 0.92-1
Replaces: mtr
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libtinfo5 (>= 6)
Breaks: mtr, suidmanager (<< 0.50)
Description: Full screen ncurses traceroute tool
mtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence of ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.
.
mtr-tiny is compiled without support for X and conserves disk space.
Original-Maintainer: Robert Woodcock <rcw@debian.org>
Homepage: http://www.bitwizard.nl/mtr/
Package: php5.6-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 88
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-zip
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.27), libzip4 (>= 0.11.2)
Description: Zip module for PHP
This package provides the Zip module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 417
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-2
Depends: libc6 (>= 2.14)
Description: System independent dlopen wrapper for GNU libtool
This package contains the run-time libltdl library.
.
A small library that aims at hiding the various difficulties of
dlopening libraries from programmers. It is a system independent
dlopen wrapper for GNU libtool.
.
It supports the following dlopen interfaces:
* dlopen (Solaris, Linux and various BSD flavors)
* shl_load (HP-UX)
* LoadLibrary (Win16 and Win32)
* load_add_on (BeOS)
* GNU DLD (emulates dynamic linking for static libraries)
* libtool's dlpreopen
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>
Homepage: http://www.gnu.org/software/libtool/
Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 215
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.72-3build1
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.4), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
HTML::Parser is a collection of modules useful for handling HTML documents.
These modules used to be part of the libwww-perl distribution, but are now
unbundled in order to facilitate a separate development track.
.
Objects of the HTML::Parser class will recognize markup and separate it from
content data. As different kinds of markup are recognized, the corresponding
event handler is invoked. The document to be parsed may also be supplied in
arbitrary chunks, making on-the-fly parsing of network documents possible.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Parser
Package: php5.6-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 497
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Replaces: php5.6-xsl (<< 5.6.18+dfsg-5~)
Provides: php-dom, php-simplexml, php-wddx, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php5.6-dom, php5.6-simplexml, php5.6-wddx, php5.6-xmlreader, php5.6-xmlwriter, php5.6-xsl
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php5.6-xsl (<< 5.6.18+dfsg-5~)
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP
This package provides the DOM, SimpleXML, WDDX, XML, and XSL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: augeas-lenses
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 1770
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: augeas
Version: 1.10.1-2
Suggests: augeas-doc
Description: Set of lenses needed by libaugeas0 to parse config files
Augeas parses configuration files described in lenses into a tree structure,
which it exposes through its public API. Changes made through the API are
written back to the initially read files.
.
Lenses are the building blocks of the file <-> tree transformation; they
combine parsing a file and building the tree (the get transformation), with
turning the tree back into an (updated) file (the put transformation).
.
The transformation works very hard to preserve comments and formatting
details. It is controlled by ``lens'' definitions that describe the file
format and the transformation into a tree. This package includes the official
set of lenses.
Original-Maintainer: Hilko Bengen <bengen@debian.org>
Homepage: http://augeas.net/
Package: gcc-8-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 117
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Description: GCC, the GNU Compiler Collection (base package)
This package contains files common to all languages and libraries
contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6774
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.19.0.5ubuntu2.4
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
/etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
/etc/cron.daily/dpkg 4a75e177a3662e2efd8d477ae8e8533b
/etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
/etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
/etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
This package provides the low-level infrastructure for handling the
installation and removal of Debian software packages.
.
For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Package: linux-image-5.4.0-1100-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10324
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1100.108~18.04.1
Config-Version: 5.4.0-1100.108~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1100-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1100-aws
Conflicts: linux-image-unsigned-5.4.0-1100-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1100.108~18.04.1)
Package: libfftw3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 15276
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.7-1
Replaces: fftw3-dev
Provides: fftw3-dev
Depends: libfftw3-bin (= 3.3.7-1), libfftw3-double3 (= 3.3.7-1), libfftw3-long3 (= 3.3.7-1), libfftw3-quad3 (= 3.3.7-1), libfftw3-single3 (= 3.3.7-1)
Suggests: libfftw3-doc
Conflicts: fftw3-dev
Description: Library for computing Fast Fourier Transforms - development
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the statically linked
library, header files and test programs.
.
This package contains the header files and static libraries.
For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1494
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: automake-1.15
Version: 1:1.15.1-3ubuntu2
Provides: automake-1.15, automaken
Depends: autoconf (>= 2.65), autotools-dev (>= 20020320.1)
Suggests: autoconf-doc, gnu-standards
Conflicts: automake (<< 1:1.4-p5-1), automake1.10-doc, automake1.5 (<< 1.5-2), automake1.6 (<< 1.6.1-4)
Description: Tool for generating GNU Standards-compliant Makefiles
Automake is a tool for automatically generating `Makefile.in's from
files called `Makefile.am'.
.
The goal of Automake is to remove the burden of Makefile maintenance
from the back of the individual GNU maintainer (and put it on the back
of the Automake maintainer).
.
The `Makefile.am' is basically a series of `make' macro definitions
(with rules being thrown in occasionally). The generated
`Makefile.in's are compliant with the GNU Makefile standards.
.
Automake 1.15 fails to work in a number of situations that Automake
1.4, 1.6, 1.7, 1.8, 1.9, 1.10, 1.11 and 1.14 did, so previous versions are
available as separate packages.
Original-Maintainer: Eric Dorland <eric@debian.org>
Homepage: https://www.gnu.org/software/automake/
Package: libipc-run-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.96-1
Depends: perl, libio-pty-perl
Description: Perl module for running processes
IPC::Run allows you to run and interact with child processes using
files, pipes, and pseudo-ttys. Both system()-style and scripted
usages are supported and may be mixed. Likewise, functional and OO
API styles are both supported and may be mixed.
.
Various redirection operators reminiscent of those seen on common
Unix and DOS command lines are provided.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IPC-Run
Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-httplib2
Version: 0.9.2+dfsg-1ubuntu0.2
Depends: python3:any (>= 3.3.2-2~), ca-certificates
Description: comprehensive HTTP client library written for Python3
httplib2.py supports many features left out of other HTTP libraries.
* HTTP and HTTPS
* Keep-Alive
* Authentication
* Caching
* All Methods
* Redirects
* Compression
* Lost update support
* Unit Tested
.
This package provides module for python3 series.
Homepage: https://github.com/jcgregorio/httplib2
Original-Maintainer: Andrea Colangelo <warp10@debian.org>
Package: libatk-bridge2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-atk
Version: 2.26.2-1
Depends: libatk1.0-0 (>= 2.25.2), libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.41.1)
Description: AT-SPI 2 toolkit bridge - shared library
This package contains the ATK bridge shared library.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Accessibility
Package: libdns-export1100
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2211
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libc6 (>= 2.14), libisc-export169, libssl1.1 (>= 1.1.0)
Description: Exported DNS Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libdns shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: cryptsetup-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 416
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cryptsetup
Version: 2:2.0.2-1ubuntu1.1
Replaces: cryptsetup (<< 2:1.4.3-1~)
Depends: libc6 (>= 2.15), libcryptsetup12 (>= 2:2.0.1), libpopt0 (>= 1.14), libuuid1 (>= 2.16)
Breaks: cryptsetup (<< 2:1.4.3-1~)
Description: disk encryption support - command line tools
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides cryptsetup, cryptsetup-reencrypt and luksformat.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Package: ftp
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netkit-ftp
Version: 0.17-34
Replaces: netstd
Depends: libc6 (>= 2.15), libreadline7 (>= 6.0), netbase
Description: classical file transfer client
This is the user interface to the ARPANET standard File Transfer Protocol.
The program allows a user to transfer files to and from a remote network
site.
Original-Maintainer: Mats Erik Andersson <mats.andersson@gisladisker.se>
Package: linux-modules-5.3.0-1023-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64601
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1023.25~18.04.1
Config-Version: 5.3.0-1023.25~18.04.1
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: ebtables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.10.4-3.5ubuntu2.18.04.3
Depends: libc6 (>= 2.14)
Recommends: iptables, kmod
Conffiles:
/etc/default/ebtables 4b49d534ccce3c32252e3ac080b8997a
/etc/ethertypes 94bffde8f75a1b8f891fb780bfe15ca2
/etc/init.d/ebtables c602bec000d3a85672500fb65ef9ca37
Description: Ethernet bridge frame table administration
Ebtables is used to set up, maintain, and inspect the tables of
Ethernet frame rules in the Linux kernel. It is analogous to iptables,
but operates at the MAC layer rather than the IP layer.
Homepage: http://ebtables.sourceforge.net
Original-Maintainer: Jochen Friedrich <jochen@scram.de>
Package: libmagickwand-6.q16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1276
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.7.4+dfsg-16ubuntu6.15
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-3 (>= 8:6.9.6.8), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
The MagickWand API is the recommended interface between the C programming
language and the ImageMagick image processing libraries. Unlike the
MagickCore C API, MagickWand uses only a few opaque types. Accessors are
available to set or get important wand properties.
.
This package contains the C libraries needed to run executables that make
use of MagickWand.
.
This version of libmagickwand is compiled for a channel
depth of 16 bits (Q16).
Homepage: http://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Package: openssl
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.1-1ubuntu2.1~18.04.23
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.1)
Suggests: ca-certificates
Conffiles:
/etc/ssl/openssl.cnf 61c17536f212862b4101ca83ae199157
Description: Secure Sockets Layer toolkit - cryptographic utility
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It contains the general-purpose command line binary /usr/bin/openssl,
useful for cryptographic operations such as:
* creating RSA, DH, and DSA key parameters;
* creating X.509 certificates, CSRs, and CRLs;
* calculating message digests;
* encrypting and decrypting with ciphers;
* testing SSL/TLS clients and servers;
* handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Package: libplymouth4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 295
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: plymouth
Version: 0.9.3-1ubuntu7
Replaces: plymouth (<< 0.9.2-1~)
Depends: libc6 (>= 2.14), libpng16-16 (>= 1.6.2-1), libudev1 (>= 183)
Breaks: plymouth (<< 0.9.2-1~)
Description: graphical boot animation and logger - shared libraries
Plymouth is an application that runs very early in the boot process
(even before the root filesystem is mounted!) that provides a graphical
boot animation while the boot process happens in the background.
.
This package contains the shared libraries.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: linux-image-aws
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta-aws-5.4
Version: 5.4.0.1103.81
Provides: virtualbox-guest-modules (= 6.1.38-dfsg-3~ubuntu1.20.04.1), wireguard-modules (= 1.0.20201112-1~20.04.1), zfs-modules (= 0.8.3-1ubuntu12.14)
Depends: linux-image-5.4.0-1103-aws
Description: Linux kernel image for Amazon Web Services (AWS) systems.
This package will always depend on the latest kernel image available
for Amazon Web Services (AWS) systems.
Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 932
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.19.4-1ubuntu2.2
Depends: libc6 (>= 2.17), libidn2-0 (>= 0.6), libpcre3, libpsl5 (>= 0.16.0), libssl1.1 (>= 1.1.0), libuuid1 (>= 2.16)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
/etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
Wget is a network utility to retrieve files from the web
using HTTP(S) and FTP, the two most widely used internet
protocols. It works non-interactively, so it will work in
the background, after having logged off. The program supports
recursive retrieval of web-authoring pages as well as FTP
sites -- you can use Wget to make mirrors of archives and
home pages or to travel the web like a WWW robot.
.
Wget works particularly well with slow or unstable connections
by continuing to retrieve a document until the document is fully
downloaded. Re-getting files from where it left off works on
servers (both HTTP and FTP) that support it. Both HTTP and FTP
retrievals can be time stamped, so Wget can see if the remote
file has changed since the last retrieval and automatically
retrieve the new version if it has.
.
Wget supports proxy servers; this can lighten the network load,
speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>
Package: linux-aws-5.4-headers-5.4.0-1094
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71134
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1094.102~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1094/debian.README.gz for details
Package: node-graceful-fs
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.1.11-1
Depends: nodejs
Description: drop-in replacement improving the Node.js fs module
node-graceful-fs module normalizes behavior across different platforms
and environments, and makes filesystem access more resilient to errors:
* queues up open and readdir calls, and retries them once something
closes if there is an EMFILE error from too many file descriptors.
* fixes lchmod for Node versions prior to 0.6.2
* implements fs.lutimes if possible. Otherwise it becomes a noop.
* ignores EINVAL and EPERM errors in chown, fchown or lchown if the
user isn't root.
* makes lchmod and lchown become noops, if not available.
* retries reading a file if read results in EAGAIN error.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/node-graceful-fs
Package: libunicode-linebreak-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 278
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.0.20160702-1build2
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.4), libsombok3 (>= 2.3.1-1~), libmime-charset-perl (>= 1.006.2)
Description: UAX #14 Unicode Line Breaking Algorithm
Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
Standards Annex #14 [UAX #14]. East_Asian_Width informative properties
defined by Annex #11 [UAX #11] will be concerned to determine breaking
positions.
Original-Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Homepage: http://search.cpan.org/dist/Unicode-LineBreak/
Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 466
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.0.1), libbz2-1.0, libc6 (>= 2.15), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), libksba8 (>= 1.3.4), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
GnuPG is GNU's tool for secure communication and data storage.
.
This package contains several useful utilities for manipulating
OpenPGP data and other related cryptographic elements. It includes:
.
* addgnupghome -- create .gnupg home directories
* applygnupgdefaults -- run gpgconf --apply-defaults for all users
* gpgcompose -- an experimental tool for constructing arbitrary
sequences of OpenPGP packets (e.g. for testing)
* gpgparsemail -- parse an e-mail message into annotated format
* gpgsplit -- split a sequence of OpenPGP packets into files
* gpg-zip -- encrypt or sign files in an archive
* kbxutil -- list, export, import Keybox data
* lspgpot -- convert PGP ownertrust values to GnuPG
* migrate-pubring-from-classic-gpg -- use only "modern" formats
* symcryptrun -- use simple symmetric encryption tool in GnuPG framework
* watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 333
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: vim
Version: 2:8.0.1453-1ubuntu1.13
Depends: xxd
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Conffiles:
/etc/vim/vimrc 8a8f58567e1a68b71d61164a4e039fdc
Description: Vi IMproved - Common files
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains files shared by all non GUI-enabled vim variants
available in Debian. Examples of such shared files are: manpages and
configuration files.
Homepage: https://vim.sourceforge.io/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Package: linux-modules-5.3.0-1034-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64655
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1034.36
Config-Version: 5.3.0-1034.36
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 446
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.38-1
Depends: perl, libhtml-parser-perl
Recommends: libcgi-fast-perl (>= 1:2.01)
Breaks: git (<< 1:2.1.3), libcgi-fast-perl (<< 1:2)
Description: module for Common Gateway Interface applications
CGI.pm is a Perl module that provides classes useful for creating Web forms
and for parsing their contents. It defines CGI objects, entities that contain
the values of the current query string and other state variables.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/CGI
Package: apport-symptoms
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.20
Recommends: apport
Description: symptom scripts for apport
Apport intercepts program crashes, collects debugging information about the
crash and the operating system environment, and sends it to bug trackers in a
standardized form. It also offers the user to report a bug about a package,
with again collecting as much information about it as possible.
.
This package extends Apport by some "symptom" scripts, so that bug reporters
do not have to guess the correct package, but report problems based on
symptoms that they have (like "sound problem"), through an interactive process.
Homepage: https://wiki.ubuntu.com/Apport
Package: libijs-0.35
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ijs
Version: 0.35-13
Depends: libc6 (>= 2.14)
Description: IJS raster image transport protocol: shared library
IJS is, first and foremost, a protocol for transmission of raster page
images. This snapshot provides a reference implementation of the protocol,
the design of which is still in flux. When the protocol specification is
published, it will be authoritative. Applications should feel free to link
against the library provided in this package, adapt that code for their own
needs, or roll a completely new implementation.
.
IJS is a client-server protocol, used to write ghostscript drivers. The
drivers are separate programs. The client and server communicate via pipes,
though shared memory may be used additionally in the future. Currently IJS
is used by the hpijs and ijsgimpprint drivers.
.
Code for both the client- and server-side is included in the library. This
package provides the shared library.
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Homepage: http://www.linuxprinting.org/ijs/
Package: linux-image-5.3.0-1017-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9111
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1017.18~18.04.1
Config-Version: 5.3.0-1017.18~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1017-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1017-aws
Conflicts: linux-image-unsigned-5.3.0-1017-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-image-5.3.0-1019-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9129
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1019.21~18.04.1
Config-Version: 5.3.0-1019.21~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1019-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1019-aws
Conflicts: linux-image-unsigned-5.3.0-1019-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1ubuntu1.18.04.5
Depends: debconf (>= 0.5) | debconf-2.0, debconf, gir1.2-glib-2.0, powermgmt-base, python3, python3-apt, python3-gi, ucf, lsb-release, lsb-base, xz-utils
Recommends: cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart
Conffiles:
/etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
/etc/kernel/postinst.d/unattended-upgrades 6b7d48fa1e4cd6b8cf445a2fb494288a
/etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
/etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
Description: automatic installation of security upgrades
This package can download and install security upgrades automatically
and unattended, taking care to only install packages from the
configured APT source, and checking for dpkg prompts about
configuration file changes.
.
This script is the backend for the APT::Periodic::Unattended-Upgrade
option.
Original-Maintainer: Michael Vogt <mvo@debian.org>
Package: php5.6-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 4448
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-cli, phpapi-20131226
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, libpcre3 (>= 2:8.41), mime-support, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), php5.6-json, php5.6-opcache, php5.6-readline, tzdata, ucf, libc6 (>= 2.27), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
This package provides the /usr/bin/php5.6 command interpreter, useful for
testing PHP scripts from a shell or performing general shell scripting tasks.
.
The following extensions are built in: Core date ereg filter hash libxml
mhash openssl pcntl pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libsqlite3-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.22.0-1ubuntu0.7
Depends: libc6 (>= 2.14)
Description: SQLite 3 shared library
SQLite is a C library that implements an SQL database engine.
Programs that link with the SQLite library can have SQL database
access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: lintian
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 4101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.5.81ubuntu1
Replaces: funny-manpages (<< 1.3-5.1)
Depends: binutils, bzip2, diffstat, dpkg (>= 1.17.14), file, gettext, intltool-debian, libapt-pkg-perl, libarchive-zip-perl, libclass-accessor-perl, libclone-perl, libdigest-sha-perl, libdpkg-perl, libemail-valid-perl, libfile-basedir-perl, libipc-run-perl, liblist-moreutils-perl, libparse-debianchangelog-perl, libtext-levenshtein-perl, libtimedate-perl, liburi-perl, libyaml-libyaml-perl, libxml-simple-perl, man-db, patchutils, perl, t1utils, xz-utils
Recommends: libperlio-gzip-perl
Suggests: binutils-multiarch, dpkg-dev, libhtml-parser-perl, libtext-template-perl
Breaks: funny-manpages (<< 1.3-5.1), pkg-perl-tools (<< 0.23)
Conffiles:
/etc/lintianrc 72bb1beb2113aaf005f500a19a3a6374
Description: Debian package checker
Lintian dissects Debian packages and reports bugs and policy
violations. It contains automated checks for many aspects of Debian
policy as well as some checks for common errors.
.
It uses an archive directory, called laboratory, in which it stores
information about the packages it examines. It can keep this
information between multiple invocations in order to avoid repeating
expensive data-collection operations. This makes it possible to check the
complete Debian archive for bugs, in a reasonable time.
.
This package is useful for all people who want to check Debian
packages for compliance with Debian policy. Every Debian maintainer
should check packages with this tool before uploading them to the
archive.
.
This version of Lintian is calibrated for policy version 4.1.4.
Homepage: https://lintian.debian.org/
Original-Maintainer: Debian Lintian Maintainers <lintian-maint@debian.org>
Package: node-archy
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-1ubuntu1
Depends: nodejs
Description: Pretty-print nested hierarchies module for Node.js
Given a tree of nested objects with 'label' and 'nodes' fields,
node-archy returns a string representation of that tree with unicode
pipe characters.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/substack/node-archy
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libann0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ann
Version: 1.1.2+doc-6
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 5)
Description: Approximate Nearest Neighbor Searching library
ANN is a library written in C++, which supports data structures and
algorithms for both exact and approximate nearest neighbor searching
in arbitrarily high dimensions. ANN assumes that distances
are measured using any class of distance functions called Minkowski
metrics. These include the well known Euclidean distance, Manhattan
distance, and max distance. ANN performs quite efficiently for point
sets ranging in size from thousands to hundreds of thousands, and in
dimensions as high as 20.
Original-Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://www.cs.umd.edu/~mount/ANN/
Package: python3-pyasn1-modules
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 363
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-pyasn1-modules
Version: 0.2.1-0.2
Depends: python3-pyasn1 (>= 0.4.1), python3-pyasn1 (<< 0.5.0), python3:any (>= 3.3.2-2~)
Description: Collection of protocols modules written in ASN.1 language (Python 3)
This is a small but growing collection of ASN.1 data structures
expressed in Python terms using pyasn1 data model.
.
It's thought to be useful to protocol developers and testers.
.
Please note that pyasn1_modules is neither part of the pyasn1 package
nor related to it.
Original-Maintainer: Marc Haber <mh+debian-packages@zugschlus.de>
Homepage: http://pypi.python.org/pypi/pyasn1-modules
Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.9-2ubuntu0.18.04.1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.14), x11-common
Description: X11 Inter-Client Exchange library
This package provides the main interface to the X11 Inter-Client Exchange
library, which allows for communication of data between X clients.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: texlive-base
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 51916
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2017.20180305-1
Replaces: texlive-common (<< 2013)
Provides: dvipdfmx
Depends: debconf (>= 0.5) | debconf-2.0, tex-common (>= 6), libpaper-utils, texlive-binaries (>= 2017.20170524.44437), ucf, xdg-utils
Recommends: lmodern (>= 0.93.3)
Suggests: ghostscript, gv | postscript-viewer, perl-tk, xpdf-reader | pdf-viewer
Breaks: texlive-common (<< 2013), texlive-math-extra (<< 2017)
Conflicts: luasseq (<< 2017.20170628), prosper (<< 2017.20170628), tex4ht (<< 20160814), texlive (<< 2017.20170628), texlive-base (<< 2017.20170628), texlive-bibtex-extra (<< 2017.20170628), texlive-binaries (<< 2017.20170524.44437), texlive-extra-utils (<< 2017.20170628), texlive-font-utils (<< 2017.20170628), texlive-fonts-extra (<< 2017.20170628), texlive-fonts-extra-doc (<< 2017.20170628), texlive-fonts-extra-links (<< 2017.20170628), texlive-fonts-recommended (<< 2017.20170628), texlive-fonts-recommended-doc (<< 2017.20170628), texlive-formats-extra (<< 2017.20170628), texlive-full (<< 2017.20170628), texlive-games (<< 2017.20170628), texlive-generic-extra (<< 2017.20170628), texlive-generic-recommended (<< 2017.20170628), texlive-htmlxml (<< 2017.20170628), texlive-humanities (<< 2017.20170628), texlive-humanities-doc (<< 2017.20170628), texlive-lang-african (<< 2017.20170628), texlive-lang-all (<< 2017.20170628), texlive-lang-arabic (<< 2017.20170628), texlive-lang-chinese (<< 2017.20170628), texlive-lang-cjk (<< 2017.20170628), texlive-lang-cyrillic (<< 2017.20170628), texlive-lang-czechslovak (<< 2017.20170628), texlive-lang-english (<< 2017.20170628), texlive-lang-european (<< 2017.20170628), texlive-lang-french (<< 2017.20170628), texlive-lang-german (<< 2017.20170628), texlive-lang-greek (<< 2017.20170628), texlive-lang-indic (<< 2017.20170628), texlive-lang-italian (<< 2017.20170628), texlive-lang-japanese (<< 2017.20170628), texlive-lang-korean (<< 2017.20170628), texlive-lang-other (<< 2017.20170628), texlive-lang-polish (<< 2017.20170628), texlive-lang-portuguese (<< 2017.20170628), texlive-lang-spanish (<< 2017.20170628), texlive-latex-base (<< 2017.20170628), texlive-latex-base-doc (<< 2017.20170628), texlive-latex-extra (<< 2017.20170628), texlive-latex-extra-doc (<< 2017.20170628), texlive-latex-recommended (<< 2017.20170628), texlive-latex-recommended-doc (<< 2017.20170628), texlive-luatex (<< 2017.20170628), texlive-metapost (<< 2017.20170628), texlive-metapost-doc (<< 2017.20170628), texlive-music (<< 2017.20170628), texlive-omega (<< 2017.20170628), texlive-pictures (<< 2017.20170628), texlive-pictures-doc (<< 2017.20170628), texlive-plain-extra (<< 2017.20170628), texlive-plain-generic (<< 2017.20170628), texlive-pstricks (<< 2017.20170628), texlive-pstricks-doc (<< 2017.20170628), texlive-publishers (<< 2017.20170628), texlive-publishers-doc (<< 2017.20170628), texlive-science (<< 2017.20170628), texlive-science-doc (<< 2017.20170628), texlive-xetex (<< 2017.20170628)
Conffiles:
/etc/libpaper.d/texlive-base f3ac62a190da9dee43f5bb6b6fbceba4
/etc/texmf/texdoctk/texdocrc.defaults 32916b26d3ecd77a1b2db7c22d75ff34
Description: TeX Live: Essential programs and files
These files are regarded as basic for any TeX system, covering plain TeX
macros, Computer Modern fonts, and configuration for common drivers; no
LaTeX.
.
This package includes the following CTAN packages:
.
texlive.infra -- basic TeX Live infrastructure
.
amsfonts -- TeX fonts from the American Mathematical Society
.
bibtex -- Process bibliographies for LaTeX, etc
.
cm -- Computer Modern fonts
.
dvipdfmx -- An extended version of dvipdfm
.
dvips -- A DVI to PostScript driver
.
enctex -- A TeX extension that translates input on its way into TeX
.
etex -- An extended version of TeX, from the NTS project
.
etex-pkg -- E-TeX support package
.
glyphlist -- Adobe Glyph List and TeX extensions
.
graphics-def -- Colour and graphics option files
.
gsftopk -- Convert "Ghostscript fonts" to PK files
.
hyph-utf8 -- Hyphenation patterns expressed in UTF-8
.
hyphen-base -- core hyphenation support files
.
ifluatex -- Provides the \ifluatex switch
.
ifxetex -- Am I running under XeTeX?
.
knuth-lib -- A small library of Metafont sources
.
knuth-local -- Knuth's local information
.
kpathsea -- Path searching library for TeX-related files
.
lua-alt-getopt -- Process application arguments the same way as getopt_long
.
luatex -- The LuaTeX engine
.
makeindex -- Makeindex development sources
.
metafont -- A system for specifying fonts
.
mflogo -- LaTeX support for Metafont logo fonts
.
mfware -- Supporting tools for use with Metafont
.
pdftex -- A TeX extension for direct creation of PDF
.
plain -- The Plain TeX format
.
tetex -- scripts and files originally from teTeX
.
tex -- A sophisticated typesetting engine
.
tex-ini-files -- Model TeX format creation files
.
texlive-common -- TeX Live documentation (common elements)
.
texlive-docindex -- top-level TeX Live doc.html, etc.
.
texlive-en -- TeX Live manual (English)
.
unicode-data -- Unicode data and loaders for TeX
.
updmap-map -- auto-generated font map files
.
xdvi -- A DVI previewer for the X Window System
.
texdoc -- Documentation access for TeX Live
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: libdigest-hmac-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.03+dfsg-1
Depends: perl
Description: module for creating standard message integrity checks
HMAC is used for message integrity checks between two parties
that share a secret key, and works in combination with some other
Digest algorithm, usually MD5 or SHA-1. The HMAC mechanism
is described in RFC 2104.
.
The Digest::HMAC module follow the common Digest:: interface,
but the constructor takes the secret key and the name of some
other simple Digest:: module as argument.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/Digest-HMAC/
Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 275
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.18.4-2ubuntu0.1
Depends: python3-certifi, python3-chardet (<< 3.1.0), python3-idna, python3-urllib3 (<< 1.23), python3:any (>= 3.4~), ca-certificates, python3-chardet (>= 3.0.2), python3-urllib3 (>= 1.21.1)
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
multipart files, and parameters with simple Python dictionaries, and access
the response data in the same way. It's powered by httplib and urllib3, but
it does all the hard work and crazy hacks for you.
.
Features
.
- International Domains and URLs
- Keep-Alive & Connection Pooling
- Sessions with Cookie Persistence
- Browser-style SSL Verification
- Basic/Digest Authentication
- Elegant Key/Value Cookies
- Automatic Decompression
- Unicode Response Bodies
- Multipart File Uploads
- Connection Timeouts
.
This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: libtiffxx5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.0.9-5ubuntu0.10
Depends: libc6 (>= 2.4), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Description: Tag Image File Format (TIFF) library -- C++ interface
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library for the experimental C++ interfaces.
Homepage: http://libtiff.maptools.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libdconf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: d-conf
Version: 0.26.0-2ubuntu3
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.44.0)
Breaks: gdm3 (<< 3.4.1-9)
Description: simple configuration storage system - runtime library
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains the runtime library.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: tmux
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 632
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.6-3ubuntu0.3
Depends: libc6 (>= 2.27), libevent-2.1-6 (>= 2.1.8-stable), libtinfo5 (>= 6), libutempter0 (>= 1.1.5)
Description: terminal multiplexer
tmux enables a number of terminals (or windows) to be accessed and
controlled from a single terminal like screen. tmux runs as a
server-client system. A server is created automatically when necessary
and holds a number of sessions, each of which may have a number of
windows linked to it. Any number of clients may connect to a session,
or the server may be controlled by issuing commands with tmux.
Communication takes place through a socket, by default placed in /tmp.
Moreover tmux provides a consistent and well-documented command
interface, with the same syntax whether used interactively, as a key
binding, or from the shell. It offers a choice of vim or Emacs key
layouts.
Homepage: https://tmux.github.io/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: libxcomposite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.4-2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 Composite extension library
libXcomposite provides an X Window System client interface to the Composite
extension to the X protocol.
.
The Composite extension allows clients called compositing managers to control
the final drawing of the screen. Rendering is done into an off-screen buffer.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libio-string-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.08-3
Depends: perl
Description: Emulate IO::File interface for in-core strings
The IO::String module provide the IO::File interface for in-core
strings. An IO::String object can be attached to a string, and
will make it possible to use the normal file operations for reading or
writing data, as well as seeking to various locations of the string.
The main reason you might want to do this, is if you have some other
library module that only provide an interface to file handles, and you
want to keep all the stuff in memory.
.
The IO::String module provide an interface compatible with
IO::File as distributed with IO-1.20, but the following methods
are not available; new_from_fd, fdopen, format_write,
format_page_number, format_lines_per_page, format_lines_left,
format_name, format_top_name.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-String/
Package: lxcfs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.1-0ubuntu2~18.04.1
Depends: libc6 (>= 2.17), libfuse2 (>= 2.6), lsb-base (>= 3.0-6)
Conffiles:
/etc/init.d/lxcfs f44261ec5f8ffb4aaf50f128cdd78b50
Description: FUSE based filesystem for LXC
LXCFS provides a FUSE based filesystem to improve the LXC experience
within the containers.
.
This filesystem offers both a cgroupfs-like view for use by
unprivileged containers which wouldn't otherwise be allowed to mount
cgroupfs. And a set of files that are meant to be bind-mounted over
their /proc equivalent to make them cgroup-aware.
Homepage: https://linuxcontainers.org
Original-Maintainer: pkg-lxc <pkg-lxc-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1054-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9284
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1054.57~18.04.1
Config-Version: 5.4.0-1054.57~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1054-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1054-aws
Conflicts: linux-image-unsigned-5.4.0-1054-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.19.03-1
Depends: perl
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
Algorithm::Diff is a Perl module that allows users to analyze text based on a
Longest Common Subsequence (LCS) algorithm. It can compare two files and find
the differences between them, which can produce the same information as the
common Unix tool 'diff'.
.
There is an XS-optimized implementation of the core loop, which accelerates
some types of diff output (see libalgorithm-diff-xs-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/~tyemq/Algorithm-Diff/
Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3867
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.12ubuntu0.2
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 1.6.12ubuntu0.2)
Depends: adduser, gpgv | gpgv2 | gpgv1, ubuntu-keyring, libapt-pkg5.0 (>= 1.6.12ubuntu0.2), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libgnutls30 (>= 3.5.6), libseccomp2 (>= 1.0.1), libstdc++6 (>= 5.2)
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conffiles:
/etc/apt/apt.conf.d/01-vendor-ubuntu 5232396660502461fc834c0a1229dbe4
/etc/apt/apt.conf.d/01autoremove 76120d358bc9037bb6358e737b3050b5
/etc/cron.daily/apt-compat 49e9b2cfa17849700d4db735d04244f3
/etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
/etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
This package provides commandline tools for searching and
managing as well as querying information about packages
as a low-level access to all features of the libapt-pkg library.
.
These include:
* apt-get for retrieval of packages and information about them
from authenticated sources and for installation, upgrade and
removal of packages together with their dependencies
* apt-cache for querying available information about installed
as well as installable packages
* apt-cdrom to use removable media as a source for packages
* apt-config as an interface to the configuration settings
* apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>
Package: apport
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 792
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Version: 2.20.9-0ubuntu7.29
Replaces: core-dump-handler, python-apport (<< 2.2-0ubuntu1)
Provides: core-dump-handler
Depends: python3, python3-apport (>= 2.20.9-0ubuntu7.29), lsb-base (>= 3.0-6), python3-gi, gir1.2-glib-2.0 (>= 1.29.17)
Recommends: apport-symptoms, policykit-1, python3-systemd
Suggests: apport-gtk | apport-kde
Breaks: python-apport (<< 2.2-0ubuntu1)
Conflicts: core-dump-handler
Conffiles:
/etc/apport/blacklist.d/README.blacklist c2ed1eb9a17ec2550747b4960cf4b73c
/etc/apport/blacklist.d/apport 44503501302b80099552bac0204a45c1
/etc/apport/crashdb.conf 4202dae3eccfa5bbb33a0a9acfcd3724
/etc/bash_completion.d/apport_completion dfe766d9328bb5c895038b44185133f9
/etc/cron.daily/apport df5d3bc9ab3a67b58156376318077304
/etc/default/apport 3446c6cac185f44237f59786e006ebe4
/etc/init.d/apport 3d51dc9135014bb49b4a19ff8dab61f1
/etc/logrotate.d/apport fa54dab59ef899b48d5455c976008df4
Description: automatically generate crash reports for debugging
apport automatically collects data from crashed processes and
compiles a problem report in /var/crash/. This utilizes the crashdump
helper hook provided by the Ubuntu kernel.
.
This package also provides a command line frontend for browsing and
handling the crash reports. For desktops, you should consider
installing the GTK+ or Qt user interface (apport-gtk or apport-kde).
Homepage: https://wiki.ubuntu.com/Apport
Package: libfribidi0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 0.19.7-2ubuntu0.1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
languages.
This package contains the shared libraries.
Homepage: http://www.fribidi.org/
Original-Maintainer: Debian Hebrew Packaging Team <debian-hebrew-package@lists.alioth.debian.org>
Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
This package contains the library files needed to run software using
libxcb-shm, the shm extension for the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: liblocale-gettext-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.07-3build2
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.26.0-4), perlapi-5.26.0
Description: module using libc functions for internationalization in Perl
The Locale::gettext module permits access from perl to the gettext() family of
functions for retrieving message strings from databases constructed
to internationalize software.
.
It provides gettext(), dgettext(), dcgettext(), textdomain(),
bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
and dngettext().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/gettext
Package: libdumbnet1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdumbnet
Version: 1.12-7build1
Depends: libc6 (>= 2.14)
Description: dumb, portable networking library -- shared library
libdumbnet provides a simplified, portable interface to several low-level
networking routines, including
* network address manipulation
* kernel arp(4) cache and route(4) table lookup and manipulation
* network firewalling (Ip filter, ipfw, ipchains, pdf, ...)
* network interface lookup and manipulation
* raw IP packet and Ethernet frame transmission
.
libdumbnet is known as libdnet in other distributions, but was renamed
in Debian in favour of the older DECnet library 'libdnet'.
.
This package contains the shared library.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://code.google.com/p/libdnet/
Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-attrs
Version: 17.4.0-2
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
attrs is an MIT-licensed Python package with class decorators that ease the
chores of implementing the most common attribute-related object protocols.
.
You just specify the attributes to work with and attrs gives you:
- a nice human-readable __repr__,
- a complete set of comparison methods,
- an initializer,
- and much more
without writing dull boilerplate code again and again.
.
This package contains attrs packged for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://attrs.readthedocs.org/
Package: node-path-is-absolute
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 15
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-1
Depends: nodejs
Description: Node.js 0.12 path.isAbsolute() ponyfill
Path-is-absolute is a Node.js module that gives developers the ability to
determine whether a path written in programming language is an absolute path.
An absolute path will always resolve to the same location, regardless of the
working directory. Path-is-absolute is a ponyfill, meaning that it does not
overwrite the native method in a JavaScript environment.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/sindresorhus/path-is-absolute
Package: dmsetup
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.176-4.1ubuntu3)
Version: 2:1.02.145-4.1ubuntu3
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.138)
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.12-1ubuntu0.18.04.2
Depends: libc6 (>= 2.14), libx11-6
Description: X11 pixmap library
The X PixMap image format is an extension of the monochrome X BitMap
format specified in the X protocol, and is commonly used in traditional
X applications.
.
This package provides runtime support for XPM format.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.39-1
Depends: perl (>= 5.26.1-2ubuntu1), perlapi-5.26.1, libc6 (>= 2.2.5)
Description: module for recursively copying Perl datatypes
The Clone module provides a clone() method which makes recursive copies of
nested hash, array, scalar and reference types, including tied variables and
objects.
.
It is faster (although less flexible) than Storable's dclone. Its
functionality is _not_ serializing in-memory objects (i.e. as
Data::Dumper or YAML::Dump do), but deep-copying them over to new
in-memory structures.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Clone
Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 764
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dnsmasq
Version: 2.79-1ubuntu0.7
Replaces: dnsmasq (<< 2.63-1~), dnsmasq-base
Provides: dnsmasq-base
Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.4~)
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Conflicts: dnsmasq-base-lua
Conffiles:
/etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
Description: Small caching DNS proxy and DHCP/TFTP server
This package contains the dnsmasq executable and documentation, but
not the infrastructure required to run it as a system daemon. For
that, install the dnsmasq package.
Homepage: http://www.thekelleys.org.uk/dnsmasq/doc.html
Original-Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Package: libxt6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 451
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.1.5-1
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libsm6, libx11-6
Description: X11 toolkit intrinsics library
libXt provides the X Toolkit Intrinsics, an abstract widget library upon
which other toolkits are based. Xt is the basis for many toolkits, including
the Athena widgets (Xaw), and LessTif (a Motif implementation).
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2ubuntu0.18.04.2
Depends: libc6 (>= 2.14), libwebp6 (>= 0.5.1)
Description: Lossy compression of digital photographic images.
Image Compression format, based on the VP8 codec.
WebP uses the modern VP8 compression format to deliver efficient
compression of images for the web. More than 30% extra gain over
optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Package: libexpat1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1146
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.2.5-3ubuntu0.9
Provides: libexpat-dev
Depends: libexpat1 (= 2.2.5-3ubuntu0.9), libc6-dev | libc-dev
Conflicts: libexpat-dev
Description: XML parsing C library - development kit
This package contains the header file and development libraries of
expat, the C library for parsing XML. Expat is a stream oriented XML
parser. This means that you register handlers with the parser prior
to starting the parse. These handlers are called when the parser
discovers the associated structures in the document being parsed. A
start tag is an example of the kind of structures for which you may
register handlers.
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 1230
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.5.2-1ubuntu1
Depends: libc6 (>= 2.14), libkmod2 (>= 5~), libpci3 (= 1:3.5.2-1ubuntu1)
Suggests: bzip2, wget | curl | lynx-cur
Description: Linux PCI Utilities
This package contains various utilities for inspecting and setting of
devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: php5.6-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1463
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: php-mbstring
Depends: php-common (>= 1:73), ucf, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), libc6 (>= 2.14)
Description: MBSTRING module for PHP
This package provides the MBSTRING module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: awscli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3478
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.14.44-1ubuntu1
Depends: python3, python3-botocore (>= 1.3.9), python3-colorama, python3-docutils, python3-rsa, python3-s3transfer, python3-yaml, python3:any (>= 3.3.2-2~)
Description: Universal Command Line Environment for AWS
This package provides a unified command line interface to many
Amazon Web Services.
.
The currently supported services include:
.
* AWS CloudFormation
* AWS Data Pipeline
* AWS Direct Connect
* AWS Elastic Beanstalk
* AWS Identity and Access Management
* AWS Import/Export
* AWS OpsWorks
* AWS Security Token Service
* AWS Storage Gateway
* Amazon CloudWatch
* Amazon ElastiCache
* Amazon Elastic Compute Cloud
* Amazon Elastic MapReduce
* Amazon Elastic Transcoder
* Amazon Redshift
* Amazon Relational Database Service (Beta)
* Amazon Simple Email Service
* Amazon Simple Notification Service
* Amazon Simple Queue Service
* Amazon Simple Storage Service
* Amazon Simple Workflow Service
* Auto Scaling
* Elastic Load Balancing
Homepage: http://aws.amazon.com/cli/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
The X Rendering Extension (Render) introduces digital image composition as
the foundation of a new rendering model within the X Window System.
Rendering geometric figures is accomplished by client-side tessellation into
either triangles or trapezoids. Text is drawn by loading glyphs into the
server and rendering sets of them. The Xrender library exposes this
extension to X clients.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXrender
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: php-symfony-console
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 3.4.6+dfsg-1ubuntu0.1
Depends: php-common, php-symfony-polyfill-mbstring (>= 1.0), php-symfony-polyfill-mbstring (<< 2~~), php-symfony-debug
Suggests: php-symfony-event-dispatcher, php-symfony-lock, php-symfony-process, php-psr-log
Breaks: php-symfony-dependency-injection (<< 3.4~~), php-symfony-process (<< 3.3~~)
Description: run tasks from the command line
The Symfony Console Component can be used to implement recurring
or long running tasks, such as cronjobs, imports or other batch
jobs. Additionally it assists the creation of nice looking command
line interfaces.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/3.4/components/console.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: libfftw3-single3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.7-1
Replaces: libfftw3-3 (<< 3.3.3-1)
Depends: libc6 (>= 2.14), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Breaks: libfftw3-3 (<< 3.3.3-1)
Description: Library for computing Fast Fourier Transforms - Single precision
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the shared library
for single precision transforms.
.
To get the static library and the header files, you need to install
libfftw3-dev. For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: libpotrace0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: potrace
Version: 1.14-2
Depends: libc6 (>= 2.14)
Description: library for tracing bitmaps
potrace is a utility for tracing a bitmap, which means, transforming
a bitmap into a smooth, scalable image.
.
libpotrace0 contains files needed to run programs that utilize the
potrace library.
Original-Maintainer: Bartosz Fenski <fenio@debian.org>
Homepage: http://potrace.sourceforge.net/
Package: python3-gdbm
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-stdlib-extensions
Version: 3.6.5-3
Replaces: python3.0 (<< 3.0.1)
Provides: python3.6-gdbm, python3.7-gdbm
Depends: python3 (>= 3.6.4-1~), python3 (<< 3.8), libc6 (>= 2.4), libgdbm5 (>= 1.14)
Suggests: python3-gdbm-dbg
Description: GNU dbm database support for Python 3.x
GNU dbm database module for Python 3.x. Install this if you want to
create or read GNU dbm database files with Python.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.6-1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
The diffutils package provides the diff, diff3, sdiff, and cmp programs.
.
`diff' shows differences between two files, or each corresponding file
in two directories. `cmp' shows the offsets and line numbers where
two files differ. `cmp' can also show all the characters that
differ between the two files, side by side. `diff3' shows differences
among three files. `sdiff' merges two files interactively.
.
The set of differences produced by `diff' can be used to distribute
updates to text files (such as program source code) to other people.
This method is especially useful when the differences are small compared
to the complete files. Given `diff' output, the `patch' program can
update, or "patch", a copy of the file.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/diffutils/
Package: linux-modules-5.4.0-1100-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69695
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1100.108~18.04.1
Config-Version: 5.4.0-1100.108~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-builtin-modules
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1.1-1
Depends: nodejs
Description: List of the Node.js builtin modules
List of the Node.js builtin modules. The list is just a JSON file and can be
used wherever.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/sindresorhus/builtin-modules#readme
Package: libparse-debianchangelog-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2.0-12
Depends: perl, libcgi-pm-perl | perl (<< 5.19), libclass-accessor-perl, libio-string-perl, liblocale-gettext-perl, libtimedate-perl
Suggests: libhtml-parser-perl, libhtml-template-perl, libxml-simple-perl
Description: parse Debian changelogs and output them in other formats
Parse::DebianChangelog is a replacement for the very limited
dpkg-parsechangelog. It can be used either via the parsechangelog
command line script or as Perl module.
.
Currently supported output formats:
* original dpkg-parsechangelog output format
* similar format with multiple stanzas instead of one
* XML
* HTML (customizable via HTML::Template templates).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://www.djpig.de/software/
Package: linux-modules-5.4.0-1038-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65725
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1038.40~18.04.1
Config-Version: 5.4.0-1038.40~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libopenexr-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 5391
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: openexr
Version: 2.2.0-11.1ubuntu1.9
Depends: libilmbase-dev (>= 2.2.0-6), libopenexr22 (= 2.2.0-11.1ubuntu1.9)
Description: development files for the OpenEXR image library
OpenEXR is a high dynamic-range (HDR) image file format developed by
Industrial Light & Magic for use in computer imaging applications.
.
OpenEXR's features include:
* Higher dynamic range and colour precision than existing 8- and
10-bit image file formats.
* Support for the "half" 16-bit floating-point pixel format.
* Multiple lossless image compression algorithms. Some of the
included codecs can achieve 2:1 lossless compression ratios on
images with film grain.
* Extensibility. New compression codecs and image types can easily
be added by extending the C++ classes included in the OpenEXR
software distribution. New image attributes (strings, vectors,
integers, etc.) can be added to OpenEXR image headers without
affecting backward compatibility with existing OpenEXR
applications.
.
This package contains the header files required if you wish to
compile/develop applications that use OpenEXR libraries.
Homepage: http://www.openexr.com
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Package: libxcb1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 681
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libxcb1 (= 1.13-2~ubuntu18.04), libpthread-stubs0-dev, libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1)
Suggests: libxcb-doc
Description: X C Binding, development files
This package contains the header and library files needed to build software
using libxcb, the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: liblvm2app2.2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1694
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.02.176-4.1ubuntu3
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.141), libsystemd0 (>= 222), libudev1 (>= 183)
Description: LVM2 application library
This package contains the lvm2app shared library. It allows easier access
to the basic LVM objects and provides functions to enumerate, create or
modify them.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Package: man-db
Status: install ok triggers-pending
Priority: important
Section: doc
Installed-Size: 2428
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.8.3-2
Replaces: man, manpages-de (<< 0.5-4), manpages-tr (<< 1.0.5.1-3), manpages-zh (<< 1.5.2-1.1), nlsutils
Provides: man, man-browser
Depends: bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, groff-base (>= 1.18.1.1-15), libc6 (>= 2.17), libgdbm5 (>= 1.12), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Pre-Depends: dpkg (>= 1.16.1~)
Suggests: apparmor, groff, less, www-browser
Breaks: manpages-tr (<< 1.0.5.1-3), manpages-zh (<< 1.5.2-1.1)
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
/etc/apparmor.d/usr.bin.man 74990e7751467337f9a8eb64aa621606
/etc/cron.daily/man-db 66756dda467471df4f38b71a69a10393
/etc/cron.weekly/man-db 40fa232bff2326e0f82837a360d0055f
/etc/manpath.config 6945cded2bf5630e953a5a12aaca5232
Description: on-line manual pager
This package provides the man command, the primary way of examining the
on-line help files (manual pages). Other utilities provided include the
whatis and apropos commands for searching the manual page database, the
manpath utility for determining the manual page search path, and the
maintenance utilities mandb, catman and zsoelim. man-db uses the groff
suite of programs to format and display the manual pages.
Triggers-Pending: /usr/share/man
Homepage: http://man-db.nongnu.org/
Package: php-composer-spdx-licenses
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.0-1
Depends: php-common
Description: SPDX licenses list and validation library
This library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/composer/spdx-licenses
Package: shared-mime-info
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 2600
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9-2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
This is the shared MIME-info database from the X Desktop Group. It is required
by any program complying to the Shared MIME-Info Database spec, which is also
included in this package.
.
At this time at least ROX, GNOME, KDE and Xfce use this database.
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info
Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 273
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 0.8.2-1~ubuntu18.04.1
Depends: xkb-data, libc6 (>= 2.17)
Description: library interface to the XKB compiler - shared library
This package provides a library to handle keyboard descriptions, including
loading them from disk, parsing them and handling their state. It's mainly
meant for client toolkits, window systems, and other system applications;
currently that includes Wayland, kmscon, GTK+, Clutter, and more.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
https://github.com/xkbcommon/libxkbcommon.git
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: http://www.xkbcommon.org/
Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.176ubuntu2.3)
Version: 4:7.4.0-1ubuntu2.3
Provides: c++-compiler
Depends: cpp (>= 4:7.4.0-1ubuntu2.3), gcc (>= 4:7.4.0-1ubuntu2.3), g++-7 (>= 7.4.0-1~), gcc-7 (>= 7.4.0-1~)
Suggests: g++-multilib
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
.
This is a dependency package providing the default GNU C++ compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyopenssl
Version: 17.5.0-1ubuntu1
Depends: python3-cryptography (>= 2.1.4), python3-six (>= 1.5.2), python3:any (>= 3.3.2-2~)
Suggests: python-openssl-doc, python3-openssl-dbg
Description: Python 3 wrapper around the OpenSSL library
High-level wrapper around a subset of the OpenSSL library, includes
.
* SSL.Connection objects, wrapping the methods of Python's portable
sockets
* Callbacks written in Python
* Extensive error-handling mechanism, mirroring OpenSSL's error
codes
.
A lot of the object methods do nothing more than calling a
corresponding function in the OpenSSL library.
.
This package contains the Python 3 version of pyopenssl.
Homepage: https://pyopenssl.org/
Original-Maintainer: Sandro Tosi <morph@debian.org>
Package: python3-software-properties
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 140
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.96.24.32.14
Depends: python3:any (>= 3.3.2-2~), python3, python3-apt (>= 0.6.20ubuntu16), python3-gi, lsb-release, iso-codes, gpg
Recommends: unattended-upgrades
Description: manage the repositories that you install software from
This software provides an abstraction of the used apt repositories.
It allows you to easily manage your distribution and independent software
vendor software sources.
Package: libpcrecpp0v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.43-1+ubuntu18.04.1+deb.sury.org+1
Replaces: libpcrecpp0 (<< 2:8.43-1+ubuntu18.04.1+deb.sury.org+1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libpcre3 (>= 2:8.41), libstdc++6 (>= 5.2)
Conflicts: libpcrecpp0 (<< 2:8.43-1+ubuntu18.04.1+deb.sury.org+1)
Description: Perl 5 Compatible Regular Expression Library - C++ runtime files
This is a C++ library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
This package contains the C++ runtime library.
Package: libpcre32-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 421
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.43-1+ubuntu18.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14)
Description: Perl 5 Compatible Regular Expression Library - 32 bit runtime files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
This package contains the 32 bit runtime library.
Package: linux-modules-5.4.0-1084-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69736
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1084.91~18.04.1
Config-Version: 5.4.0-1084.91~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.4.0-1051-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69457
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1051.53~18.04.1
Config-Version: 5.4.0-1051.53~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Netfilter netlink library
libnfnetlink is the low-level library for netfilter related
kernel/userspace communication. It provides a generic messaging
infrastructure for in-kernel netfilter subsystems (such as
nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
respective users and/or management tools in userspace.
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pinentry
Version: 1.1.0-1
Provides: pinentry
Depends: libassuan0 (>= 2.0.1), libc6 (>= 2.14), libgpg-error0 (>= 1.14), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
This package contains a program that allows for secure entry of PINs or
pass phrases. That means it tries to take care that the entered
information is not swapped to disk or temporarily stored anywhere.
This functionality is particularly useful for entering pass phrases
when using encryption software such as GnuPG or e-mail clients using
the same. It uses an open protocol and is therefore not tied to
particular software.
.
The program contained in this package implements a PIN entry dialog
using the curses tool kit, meaning that it is useful for users
working in text mode without the X Window System. There are sibling
packages that implement PIN entry dialogs that use an X tool kit. If
you install any of the graphical packages then this package is not
necessary because the sibling packages automatically fall back to
text mode if X is not active.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/pinentry/
Package: librest-0.7-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librest
Version: 0.8.0-2
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libsoup-gnome2.4-1 (>= 2.27.4), libsoup2.4-1 (>= 2.30), libxml2 (>= 2.7.4)
Description: REST service access library
This library was designed to make it easier to access web services that
claim to be "RESTful". It includes convenience wrappers for libsoup and
libxml to ease remote use of the RESTful API.
Original-Maintainer: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Homepage: https://wiki.gnome.org/Librest
Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 28424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.0.1453-1ubuntu1.13
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:8.0.1453-1ubuntu1.13)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains vimtutor and the architecture independent runtime
files, used, if available, by all vim variants available in Debian.
Example of such runtime files are: online documentation, rules for
language-specific syntax highlighting and indentation, color schemes,
and standard plugins.
Homepage: https://vim.sourceforge.io/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.7-3.1ubuntu1.3
Depends: libavahi-common3 (>= 0.6.22), libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14)
Description: Avahi client library
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains the library for Avahi's C API which allows you
to integrate mDNS/DNS-SD functionality into your application.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: linux-image-5.4.0-1055-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9287
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1055.58~18.04.1
Config-Version: 5.4.0-1055.58~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1055-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1055-aws
Conflicts: linux-image-unsigned-5.4.0-1055-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 943
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.27), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6ubuntu2.18.04.6)
Recommends: update-motd
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
/etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
/etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
/etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
/etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
/etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
/etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
/etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
/etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
/etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
This package completes the set of modules for PAM. It includes the
pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 403
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-urllib3
Version: 1.22-1ubuntu0.18.04.2
Depends: python3:any (>= 3.3.2-2~), python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
urllib3 supports features left out of urllib and urllib2 libraries.
.
- Re-use the same socket connection for multiple requests (HTTPConnectionPool
and HTTPSConnectionPool) (with optional client-side certificate
verification).
- File posting (encode_multipart_formdata).
- Built-in redirection and retries (optional).
- Supports gzip and deflate decoding.
- Thread-safe and sanity-safe.
- Small and easy to understand codebase perfect for extending and
building upon.
.
This package contains the Python 3 version of the library.
Homepage: http://urllib3.readthedocs.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: python3-jmespath
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jmespath
Version: 0.9.3-1ubuntu1
Depends: python3:any (>= 3.3.2-2~)
Description: JSON Matching Expressions (Python 3)
JMESPath is python library which allows you to declaratively specify how
to extract elements from a JSON document.
.
This package contains the module for Python 3.
Homepage: https://github.com/boto/jmespath
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: libmpc3
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpclib3
Version: 1.1.0-1
Depends: libc6 (>= 2.4), libgmp10, libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
MPC is a portable library written in C for arbitrary precision
arithmetic on complex numbers providing correct rounding. For the time
being, it contains all arithmetic operations over complex numbers, the
exponential and the logarithm functions, the trigonometric and
hyperbolic functions.
.
Ultimately, it should implement a multiprecision equivalent of the ISO
C99 standard.
.
It builds upon the GNU MP and the MPFR libraries.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: http://www.multiprecision.org/mpc/
Package: libgamin0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gamin
Version: 0.1.10-5build1
Replaces: libfam0, libfam0c102
Provides: libfam0, libfam0c102
Depends: libc6 (>= 2.15), gamin
Conflicts: libfam0, libfam0c102
Description: Client library for the gamin file and directory monitoring system
Gamin is a file and directory monitoring system defined to be a
subset of the FAM (File Alteration Monitor) system.
.
This package contains the client library for the gamin file and directory
monitoring system.
Original-Maintainer: Michael Banck <mbanck@debian.org>
Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2041
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Replaces: libstdc++6-8-dbg (<< 4.9.0-3)
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1build2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), chromium-browser (<= 43.0.2357.130-0ubuntu2), clustalx (<= 2.1+lgpl-2), dff (<= 1.3.0+dfsg.1-4.1build2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), flush (<= 0.9.12-3.1ubuntu1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2build1), innoextract (<= 1.4-1build1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 4.0.53-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.55.0, libcpprest2.2 (<= 2.2.0-1), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1build1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1build3), libdiet-client2.8 (<= 2.8.0-1build3), libdiet-sed2.8 (<= 2.8.0-1build3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4482~dfsg-3ubuntu3), libgmsh2 (<= 2.8.5+dfsg-1.1ubuntu1), libinsighttoolkit4.6 (<= 4.6.0-3ubuntu3), libkgeomap2 (<= 4:15.04.2-0ubuntu1), libkolabxml1 (<= 1.1.0-3), libkvkontakte1 (<= 1.0~digikam4.10.0-0ubuntu2), libmarisa0 (<= 0.2.4-8build1), libmediawiki1 (<= 1.0~digikam4.10.0-0ubuntu2), libogre-1.8.0 (<= 1.8.1+dfsg-0ubuntu5), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1ubuntu2), libpqxx-4.0 (<= 4.0.1+dfsg-3ubuntu1), libreoffice-core (<= 1:4.4.4~rc3-0ubuntu1), librime1 (<= 1.2+dfsg-2), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.6.3-0ubuntu7), mongodb-server (<= 1:2.6.3-0ubuntu7), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1build1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.19-1ubuntu2), photoprint (<= 0.4.2~pre2-2.3), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2build1), python-healpy (<= 1.8.1-1), python3-taglib (<= 0.3.6+dfsg-2build2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 4.0.53-1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3build1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
This package contains an additional runtime library for C++ programs
built with the GNU compiler.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1012
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.4
Depends: libc6 (>= 2.16), libcom-err2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.16-2ubuntu0.4)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the main Kerberos v5 API
used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>
Package: node-isexe
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.0.0-3
Depends: nodejs
Description: minimal module to check if a file is executable
This Node.js module allows ones to check if a given file is executable,
using promise is available and checking PATHEXT environment
variable on windows.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/isexe#readme
Package: python3-ndg-httpsclient
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ndg-httpsclient
Version: 0.4.4-1
Depends: python3-openssl, python3-pyasn1 (>= 0.1.1), python3:any (>= 3.3.2-2~)
Description: enhanced HTTPS support for httplib and urllib2 using PyOpenSSL for Python3
ndg-httpsclient is a HTTPS client implementation for httplib and
urllib2 based on PyOpenSSL. PyOpenSSL provides a more fully featured SSL
implementation over the default provided with Python and importantly
enables full verification of the SSL peer.
.
This is the Python3 package
Original-Maintainer: Gianfranco Costamagna <locutusofborg@debian.org>
Homepage: https://pypi.python.org/pypi/ndg-httpsclient
Package: php-symfony-filesystem
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 3.4.6+dfsg-1ubuntu0.1
Depends: php-common
Description: basic filesystem utilities
The Symfony Filesystem Component provides basic utilities to work
with the filesystem, like creating directories, removing files or
adding symlinks.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/3.4/components/filesystem.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.30-21ubuntu1~18.04.9
Provides: binutils-gold, elf-binutils
Depends: libc6 (>= 2.27), zlib1g (>= 1:1.1.4), binutils-common (= 2.30-21ubuntu1~18.04.9), libbinutils (= 2.30-21ubuntu1~18.04.9), binutils-x86-64-linux-gnu (= 2.30-21ubuntu1~18.04.9)
Suggests: binutils-doc (>= 2.30-21ubuntu1~18.04.9)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
The programs in this package are used to assemble, link and manipulate
binary and object files. They may be used in conjunction with a compiler
and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: python3-josepy
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 142
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-josepy
Version: 1.1.0-2+ubuntu18.04.1+certbot+1
Depends: python3-cryptography (>= 0.8), python3-openssl (>= 0.13), python3-pkg-resources, python3-six (>= 1.9.0), python3:any (>= 3.3.2-2~)
Description: JOSE implementation for Python 3.x
This package is a Python implementation of the standards developed by
IETF Javascript Object Signing and Encryption (Active WG), in
particular the following RFCs:
.
- JSON Web Algorithms (JWA)
- JSON Web Key (JWK)
- JSON Web Signature (JWS)
.
This package was originally developed as part of the ACME protocol
implementation. This is the Python 3 library.
Homepage: https://certbot.eff.org/
Package: libntfs-3g88
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 358
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ntfs-3g
Version: 1:2017.3.23-2ubuntu0.18.04.5
Depends: libc6 (>= 2.17)
Description: read/write NTFS driver for FUSE (runtime library)
NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
filesystem used by Microsoft Windows.
.
This package contains the actual library.
Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: libffi6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.2.1-8
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libaudit-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.8.2-1ubuntu1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
/etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
.
This package contains the libaudit.conf configuration file and the associated
manpage.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Package: icu-devtools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 600
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: icu
Version: 65.1-1+ubuntu18.04.1+deb.sury.org+1
Replaces: icu-tools (<< 65.1-1~), libicu-dev (<< 65.1-1+ubuntu18.04.1+deb.sury.org+1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libicu65 (>= 65.1-1~), libstdc++6 (>= 5.2)
Breaks: icu-tools (<< 65.1-1~), libicu-dev (<< 65.1-1+ubuntu18.04.1+deb.sury.org+1)
Description: Development utilities for International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains programs used to
manipulate data files found in the ICU sources and is a dependency of
libicu-dev. End users would generally not need to install this package.
Homepage: http://www.icu-project.org
Package: libtext-charwidth-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-7.1
Depends: libc6 (>= 2.4), perl-base (>= 5.26.0-5), perlapi-5.26.0
Description: get display widths of characters on the terminal
This module permits perl software to get the display widths of characters
and strings on the terminal, using wcwidth() and wcswidth() from libc.
.
It provides mbwidth(), mbswidth(), and mblen().
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::CharWidth
Package: node-spdx-correct
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.2-1
Depends: nodejs, node-spdx-license-ids (>= 1.0.2)
Description: correct invalid SPDX identifiers
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/kemitchell/spdx-correct.js#readme
Package: linux-modules-5.3.0-1017-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64280
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1017.18~18.04.1
Config-Version: 5.3.0-1017.18~18.04.1
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Built-Using: zfs-dkms (= 0.8.1-1ubuntu14.4)
Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 420
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1.5
Depends: libc6 (>> 2.27), libc6 (<< 2.28)
Recommends: manpages, manpages-dev
Description: GNU C Library: Development binaries
This package contains utility programs related to the GNU C Library
development package.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: node-async
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.8.0-3
Depends: libjs-async, nodejs
Description: functions and patterns for asynchronous code - Node.js
Async is a utility module which provides straight-forward, powerful
functions for working with asynchronous Javascript.
.
Async provides around 20 functions that include the usual 'functional'
suspects (map, reduce, filter, forEach…) as well as some common
patterns for asynchronous control flow (parallel, series, waterfall…).
All these functions assume you follow the Node convention of providing
a single callback as the last argument of your async function.
.
This provides async for use with Node.js -
an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/caolan/async
Package: liblua5.2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lua5.2
Version: 5.2.4-1.1build1
Depends: libc6 (>= 2.14), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.2
Lua is a powerful, light-weight programming language designed for extending
applications. The language engine is accessible as a library, having a C
API which allows the application to exchange data with Lua programs and also
to extend Lua with C functions. Lua is also used as a general-purpose,
stand-alone language through the simple command line interpreter provided.
.
This package contains runtime libraries. You shouldn't need to install it
explicitly.
Original-Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Homepage: http://www.lua.org
Package: busybox-static
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 2114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.27.2-2ubuntu3.4
Replaces: busybox
Provides: busybox
Conflicts: busybox
Description: Standalone rescue shell with tons of builtin utilities
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for the most common
utilities you would usually find on your desktop system (i.e., ls, cp, mv,
mount, tar, etc.). The utilities in BusyBox generally have fewer options than
their full-featured GNU cousins; however, the options that are included
provide the expected functionality and behave very much like their GNU
counterparts.
.
busybox-static provides you with a statically linked simple stand alone shell
that provides all the utilities available in BusyBox. This package is
intended to be used as a rescue shell, in the event that you screw up your
system. Invoke "busybox sh" and you have a standalone shell ready to save
your system from certain destruction. Invoke "busybox", and it will list the
available builtin commands.
Built-Using: glibc (= 2.27-3ubuntu1.2)
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.7-3.1ubuntu1.3
Depends: libc6 (>= 2.14), libavahi-common-data
Description: Avahi common library
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains the Avahi common library, which is a set of common
functions used by many of Avahis components and client applications.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: python3-augeas
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 41
Maintainer: Free Ekanayaka <freee@debian.org>
Architecture: all
Source: python-augeas
Version: 0.5.0-1+ubuntu18.04.1+certbot+1
Depends: libaugeas0 (>= 0.7.2), python3:any (>= 3.3.2-2~)
Description: Python3 bindings for Augeas
Augeas is a library and command line tool that focuses
on the most basic problem in handling Linux configurations
programmatically: editing actual configuration files in a
controlled manner.
.
This module provides a Python3 interface to the Augeas API.
Homepage: http://augeas.net/
Package: mysql-client-5.7
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 30943
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mysql-5.7
Version: 5.7.42-0ubuntu0.18.04.1
Replaces: mysql-client-5.5, mysql-client-5.6 (<< 5.7), virtual-mysql-client
Provides: virtual-mysql-client
Depends: debianutils (>= 1.6), mysql-client-core-5.7, mysql-common (>= 5.5), libc6 (>= 2.14), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), libssl1.1 (>= 1.1.1), libstdc++6 (>= 5.2)
Breaks: mysql-client-5.6 (<< 5.7), mysql-server-core-5.6 (<< 5.6.22-1~)
Conflicts: mysql-client-5.5, virtual-mysql-client
Description: MySQL database client binaries
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
.
This package includes the client binaries and the additional tool
mysqlreport.
Homepage: http://dev.mysql.com/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Package: python3-twisted
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 12448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: twisted
Version: 17.9.0-2ubuntu0.3
Replaces: python3-twisted-experimental
Depends: python3-automat (>= 0.6.0), python3-constantly, python3-hyperlink, python3-incremental, python3-zope.interface (>= 4.0.2), python3:any (>= 3.3.2-2~), python3-twisted-bin (>= 17.9.0-2ubuntu0.3), python3-openssl, python3-service-identity
Recommends: python3-pam, python3-serial
Suggests: python3-tk, python3-gtk2, python3-glade2, python3-qt4, python3-wxgtk2.8
Conflicts: python3-twisted-experimental
Description: Event-based framework for internet applications
It includes a web server, a telnet server, a multiplayer RPG engine, a
generic client and server for remote object access, and APIs for creating
new protocols.
Homepage: https://twistedmatrix.com/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 986
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.6.2-1ubuntu1.1
Depends: libc6 (>= 2.15), libpam0g (>= 0.99.7.1), libtinfo5 (>= 6), libutempter0 (>= 1.1.5)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
/etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
/etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
GNU Screen is a terminal multiplexer that runs several separate "screens" on
a single physical character-based terminal. Each virtual terminal emulates a
DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
can be detached and resumed later on a different terminal.
.
Screen also supports a whole slew of other features, including configurable
input and output translation, serial port support, configurable logging,
and multi-user support.
Homepage: https://savannah.gnu.org/projects/screen
Original-Maintainer: Axel Beckert <abe@debian.org>
Package: libpcre16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 441
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.43-1+ubuntu18.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14)
Description: Perl 5 Compatible Regular Expression Library - 16 bit runtime files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
This package contains the 16 bit runtime library.
Package: initramfs-tools-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: initramfs-tools
Version: 0.130ubuntu3.6
Depends: libc6 (>= 2.4), libudev1 (>= 183)
Description: binaries used by initramfs-tools
This package contains binaries used inside the initramfs images generated
by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Package: python3-service-identity
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-service-identity
Version: 16.0.0-2
Depends: python3-attr, python3-openssl, python3-pyasn1, python3-pyasn1-modules, python3:any (>= 3.3.2-2~)
Recommends: python3-idna
Description: Service identity verification for pyOpenSSL (Python 3 module)
Service_identity aspires to give you all the tools you need for verifying
whether a certificate is valid for the intended purposes.
.
In the simplest case, this means host name verification. However,
service_identity implements RFC 6125 fully and plans to add other
relevant RFCs too.
.
This package contains service_identity for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/service_identity
Package: libxml-libxml-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 999
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0128+dfsg-5
Depends: libc6 (>= 2.14), libxml2 (>= 2.7.4), perl (>= 5.26.1-2ubuntu1), perlapi-5.26.1, libxml-namespacesupport-perl, libxml-sax-perl
Description: Perl interface to the libxml2 library
XML::LibXML is a Perl interface to the GNOME libxml2 library, which provides
interfaces for parsing and manipulating XML files. This module allows Perl
programmers to make use of the highly capable validating XML parser and the
high performance Document Object Model (DOM) implementation. Additionally, it
supports using the XML Path Language (XPath) to find and extract information.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/XML-LibXML
Package: libkrb5-26-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 646
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libasn1-8-heimdal (>= 1.6~git20131117), libc6 (>= 2.15), libcom-err2 (>= 1.41.11), libhcrypto4-heimdal (>= 1.7~git20161112), libheimbase1-heimdal (>= 1.6~git20131117), libhx509-5-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.7~git20160418), libsqlite3-0 (>= 3.5.9), libwind0-heimdal (>= 1.6~git20120311)
Description: Heimdal Kerberos - libraries
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the Kerberos 5 library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: libx11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2432
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.6.4-3ubuntu0.4
Depends: libx11-6 (= 2:1.6.4-3ubuntu0.4), libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1), x11proto-core-dev (>= 7.0.17), x11proto-input-dev, x11proto-kb-dev, xtrans-dev, libxcb1-dev
Recommends: libx11-doc
Description: X11 client-side library (development headers)
This package provides a client interface to the X Window System, otherwise
known as 'Xlib'. It provides a complete API for the basic functions of the
window system.
.
This package contains the development headers for the library found in
libx11-6. Non-developers likely have little use for this package.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libcolord2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 380
Maintainer: Christopher James Halse Rogers <raof@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: colord
Version: 1.3.3-2build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), liblcms2-2 (>= 2.6), libudev1 (>= 196)
Suggests: colord
Description: system service to manage device colour profiles -- runtime
colord is a system service that makes it easy to manage, install and generate
colour profiles to accurately colour manage input and output devices.
.
It provides a D-Bus API for system frameworks to query, a persistent data
store, and a mechanism for session applications to set system policy.
.
This package contains a gobject-based convenience library for programs to
interact with the colord system daemon.
Homepage: http://www.freedesktop.org/software/colord/
Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 578
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.27-2
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
LibThai is a set of Thai language support routines aimed to ease
developers' tasks to incorporate Thai language support in their applications.
It includes important Thai-specific functions e.g. word breaking, input and
output methods as well as basic character and string supports.
.
This package contains data files needed by the LibThai library.
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Homepage: https://linux.thai.net/projects/libthai
Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 580
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20170828-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
GNU findutils provides utilities to find files meeting specified
criteria and perform various actions on the files which are found.
This package contains 'find' and 'xargs'; however, 'locate' has
been split off into a separate package.
Original-Maintainer: Andreas Metzler <ametzler@debian.org>
Homepage: https://savannah.gnu.org/projects/findutils/
Package: accountsservice
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.6.45-1ubuntu1.3
Depends: dbus, libaccountsservice0 (= 0.6.45-1ubuntu1.3), libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (>= 0.99)
Suggests: gnome-control-center
Conffiles:
/etc/dbus-1/system.d/org.freedesktop.Accounts.conf 06247d62052029ead7d9ec1ef9457f42
Description: query and manipulate user account information
The AccountService project provides a set of D-Bus
interfaces for querying and manipulating user account
information and an implementation of these interfaces,
based on the useradd, usermod and userdel commands.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: linux-aws-5.4-headers-5.4.0-1093
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71134
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1093.102~18.04.2
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1093/debian.README.gz for details
Package: liblzma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 654
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.2-1.3ubuntu0.1
Depends: liblzma5 (= 5.2.2-1.3ubuntu0.1)
Suggests: liblzma-doc
Description: XZ-format compression library - development files
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
The native format of liblzma is XZ; it also supports raw (headerless)
streams and the older LZMA format used by lzma. (For 7-Zip's related
format, use the p7zip package instead.) This package provides the
development library needed to build programs using liblzma.
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Package: libpng-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.34-1ubuntu0.18.04.2
Replaces: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Depends: libpng16-16 (= 1.6.34-1ubuntu0.18.04.2), zlib1g-dev
Recommends: libpng-tools
Breaks: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Conflicts: libpng12-0-dev, libpng12-dev, libpng2-dev, libpng3-dev
Description: PNG library - development (version 1.6)
libpng is a library implementing an interface for reading and writing
PNG (Portable Network Graphics) format files.
.
This package contains the header and development files needed to build
programs and packages using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: libpango1.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1877
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pango1.0
Version: 1.40.14-1ubuntu0.1
Depends: gir1.2-pango-1.0 (= 1.40.14-1ubuntu0.1), libcairo2-dev (>= 1.12.10), libfontconfig1-dev (>= 2.10.91), libfreetype6-dev, libglib2.0-dev (>= 2.34.0), libharfbuzz-dev (>= 0.9.9), libpango-1.0-0 (= 1.40.14-1ubuntu0.1), libpangocairo-1.0-0 (= 1.40.14-1ubuntu0.1), libpangoft2-1.0-0 (= 1.40.14-1ubuntu0.1), libpangoxft-1.0-0 (= 1.40.14-1ubuntu0.1), libx11-dev, libxft-dev, libxrender-dev, pkg-config, libc6 (>= 2.7), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.12), libglib2.0-0 (>= 2.34.0), libx11-6, libxft2 (>> 2.1.1)
Recommends: debhelper
Suggests: imagemagick, libpango1.0-doc
Description: Development files for the Pango
Pango is a library for layout and rendering of text, with an emphasis
on internationalization. Pango can be used anywhere that text layout is
needed. however, most of the work on Pango-1.0 was done using the GTK+
widget toolkit as a test platform. Pango forms the core of text and
font handling for GTK+-2.0.
.
Pango is designed to be modular; the core Pango layout can be used with
four different font backends:
- Core X windowing system fonts
- Client-side fonts on X using the Xft library
- Direct rendering of scalable fonts using the FreeType library
- Native fonts on Microsoft backends
.
This package contains the header files and some files needed for development
with Pango.
Homepage: http://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
Contains the shared library for Linux-PAM, a library that enables the
local system administrator to choose how applications authenticate users.
In other words, without rewriting or recompiling a PAM-aware application,
it is possible to switch between the authentication mechanism(s) it uses.
One may entirely upgrade the local authentication system without touching
the applications themselves.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>
Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
This package provides the main interface to the X11 display manager control
protocol library, which allows for remote logins to display managers.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.18
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
/etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
This package creates the XML infrastructure directories and provides
XML catalog file support in compliance with the current Debian XML
Policy draft:
.
* infrastructure directories:
- /etc/xml
- /usr/share/xml/{declaration,entities,misc,schema}
- /usr/local/share/xml/{declaration,entities,misc,schema}
.
* XML catalog schema: OASIS XML Catalog Committee Specification 1.0
.
* update-xmlcatalog(8): tool for maintaining the root XML catalog
file and the package XML catalog files in the '/etc/xml' directory
as well as local XML catalog files.
.
* dh_installxmlcatalogs(1): debhelper tool for installing local XML
catalog files and registering XML entities in package XML catalog
files and the root XML catalog file (requires debhelper package)
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: libgdbm-compat4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.14.1-6
Depends: libc6 (>= 2.14), libgdbm5 (>= 1.14)
Description: GNU dbm database routines (legacy support runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
.
This package includes library files, required to run old programs,
that use legacy 'dbm' interface. For new programs, please use modern
interface, provided by libgdbm5 and libgdbm-dev.
Original-Maintainer: Dmitry Bogatov <KAction@gnu.org>
Homepage: https://gnu.org/software/gdbm
Package: javascript-common
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 11
Suggests: apache2 (>= 2.4.6~) | lighttpd | httpd
Conffiles:
/etc/lighttpd/conf-available/90-javascript-alias.conf 568434a47d89bb89ecf81c8f9c4e1669
/etc/apache2/conf-available/javascript-common.conf 133aafb01e900b05e75042fd47dec067
Description: Base support for JavaScript library packages
Web applications that use JavaScript need to distribute it through HTTP. Using
a common path for every script avoids the need to enable this path in the HTTP
server for every package.
.
This is a helper package that creates /usr/share/javascript and enables it in
the Apache and Lighttpd webserver.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: node-cookie-jar
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.3.1-1
Depends: nodejs
Description: Cookie handling for HTTP clients - module for Node.js
node-cookie-jar provides minimal cookie handling for HTTP clients.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/mikeal/cookie-jar
Package: libcap-ng0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.7-3.1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
This library implements the user-space interfaces to the POSIX
1003.1e capabilities available in Linux kernels. These capabilities are
a partitioning of the all powerful root privilege into a set of distinct
privileges.
.
The libcap-ng library is intended to make programming with POSIX
capabilities much easier than the traditional libcap library.
.
This package contains header files and libraries for libcap-ng.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://people.redhat.com/sgrubb/libcap-ng
Package: friendly-recovery
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 44
Maintainer: Dimitri John Ledkov <xnox@ubuntu.com>
Architecture: all
Version: 0.2.38
Depends: systemd-sysv, whiptail
Recommends: gettext-base, update-manager-core
Breaks: grub2 (<< 1.99-12ubuntu4), initramfs-tools (<< 0.99ubuntu4), upstart (<< 1.3-0ubuntu9)
Description: Make recovery boot mode more user-friendly
Make the recovery boot mode more user-friendly by providing a menu
with pluggable options.
Package: dbus
Status: install ok installed
Priority: important
Section: devel
Installed-Size: 560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.12.2-1ubuntu1.4
Depends: adduser, lsb-base, libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libcap-ng0, libdbus-1-3 (= 1.12.2-1ubuntu1.4), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
/etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
/etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
This package contains the D-Bus daemon and related utilities.
.
The client-side library can be found in the libdbus-1-3 package, as it is no
longer contained in this package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: ubuntu-minimal
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.417
Depends: adduser, apt, apt-utils, bzip2, console-setup, debconf, debconf-i18n, eject, init, initramfs-tools, iproute2, iputils-ping, isc-dhcp-client, kbd, kmod, less, locales, lsb-release, mawk, mount, netbase, netcat-openbsd, nplan, passwd, procps, python3, sensible-utils, sudo, tzdata, ubuntu-advantage-tools, ubuntu-keyring, udev, vim-tiny, whiptail
Recommends: rsyslog
Description: Minimal core of Ubuntu
This package depends on all of the packages in the Ubuntu minimal system,
that is a functional command-line system with the following capabilities:
.
- Boot
- Detect hardware
- Connect to a network
- Install packages
- Perform basic diagnostics
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.25), libselinux1 (>= 2.6-3~)
Description: device mounting library
This device mounting library is used by mount and umount helpers.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: configobj
Version: 5.0.6-2
Depends: python3-six, python3:any (>= 3.3.2-2~)
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
ConfigObj is a simple but powerful config file reader and writer: an
ini file round tripper. Its main feature is that it is very easy to
use, with a straightforward programmer's interface and a simple
syntax for config files. It has lots of other features, though:
.
* Nested sections (subsections), to any level
* List values
* Multiple line values
* String interpolation (substitution)
* Integrated with a powerful validation system
+ including automatic type checking/conversion
+ and allowing default values
+ repeated sections
* All comments in the file are preserved
* The order of keys/sections is preserved
* Full Unicode support
* Powerful unrepr mode for storing/retrieving Python data-types
.
This is the Python 3 version of the package.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://www.voidspace.org.uk/python/configobj.html
Package: linux-modules-5.4.0-1045-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69395
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1045.47~18.04.1
Config-Version: 5.4.0-1045.47~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 383
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.15-0ubuntu1
Depends: libc6 (>= 2.14)
Conffiles:
/etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85
/etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5
Description: display or change Ethernet device settings
ethtool can be used to query and change settings such as speed, auto-
negotiation and checksum offload on many network devices, especially
Ethernet devices.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://www.kernel.org/pub/software/network/ethtool/
Package: linux-aws-5.4-headers-5.4.0-1099
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71127
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1099.107~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1099/debian.README.gz for details
Package: npm
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 10408
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.5.2-0ubuntu4
Depends: nodejs, node-abbrev (>= 1.0.4), node-ansi (>= 0.3.0-2), node-ansi-color-table, node-archy, node-block-stream, node-fstream (>= 0.1.22), node-fstream-ignore, node-github-url-from-git, node-glob (>= 3.1.21), node-graceful-fs (>= 2.0.0), node-inherits, node-ini (>= 1.1.0), node-lockfile, node-lru-cache (>= 2.3.0), node-minimatch (>= 0.2.11), node-mkdirp (>= 0.3.3), node-gyp (>= 0.10.9), node-nopt (>= 3.0.1), node-npmlog, node-once, node-osenv, node-read, node-read-package-json (>= 1.1.0), node-request (>= 2.25.0), node-retry, node-rimraf (>= 2.2.2), node-semver (>= 2.1.0), node-sha, node-slide, node-tar (>= 0.1.18), node-underscore, node-which
Description: package manager for Node.js
Node.js is an event-based server-side javascript engine.
.
npm is the package manager for the Node JavaScript platform. It puts
modules in place so that node can find them, and manages dependency
conflicts intelligently.
.
It is extremely configurable to support a wide variety of use cases.
Most commonly, it is used to publish, discover, install, and develop
node programs.
Homepage: http://github.com/isaacs/npm
Package: node-mute-stream
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 19
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.7-1
Depends: nodejs
Description: Pass-through stream that can be muted module for Node.js
node-mute-stream is a basic pass-through stream, but when muted,
the bytes are silently dropped, rather than being passed through.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/mute-stream
Package: texlive-fonts-recommended
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 18232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-base
Version: 2017.20180305-1
Depends: tex-common (>= 6), texlive-base (>= 2017.20170628)
Recommends: tex-gyre, tipa (>= 2:1.2-2.1)
Suggests: texlive-fonts-recommended-doc
Breaks: texlive-base (<< 2017.20170628)
Description: TeX Live: Recommended fonts
Recommended fonts, including the base 35 PostScript fonts, Latin Modern, TeX
Gyre, and T1 and other encoding support for Computer Modern, in outline
form.
.
This package includes the following CTAN packages:
.
avantgar -- URW "Base 35" font pack for LaTeX
.
bookman -- URW "Base 35" font pack for LaTeX
.
charter -- Charter fonts
.
cmextra -- Knuth's local information
.
courier -- URW "Base 35" font pack for LaTeX
.
ec -- Computer modern fonts in T1 and TS1 encodings
.
euro -- Provide Euro values for national currency amounts
.
euro-ce -- Euro and CE sign font
.
eurosym -- Metafont and macros for Euro sign
.
fpl -- SC and OsF fonts for URW Palladio L
.
helvetic -- URW "Base 35" font pack for LaTeX
.
marvosym -- Martin Vogel's Symbols (marvosym) font
.
mathpazo -- Fonts to typeset mathematics to match Palatino
.
manfnt-font -- Knuth's "manual" fonts
.
mflogo-font -- Metafont logo font
.
ncntrsbk -- URW "Base 35" font pack for LaTeX
.
palatino -- URW "Base 35" font pack for LaTeX
.
pxfonts -- Palatino-like fonts in support of mathematics
.
rsfs -- Ralph Smith's Formal Script font
.
symbol -- URW "Base 35" font pack for LaTeX
.
times -- URW "Base 35" font pack for LaTeX
.
txfonts -- Times-like fonts in support of mathematics
.
utopia -- Adobe Utopia fonts
.
wasy -- The wasy fonts (Waldi symbol fonts)
.
wasy2-ps -- Type 1 versions of wasy2 fonts
.
wasysym -- LaTeX support file to use the WASY2 fonts
.
zapfchan -- URW "Base 35" font pack for LaTeX
.
zapfding -- URW "Base 35" font pack for LaTeX
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9.2ubuntu2
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
Keyutils is a set of utilities for managing the key retention facility in the
kernel, which can be used by filesystems, block devices and more to gain and
retain the authorization and encryption keys required to perform secure
operations.
.
This package provides a wrapper library for the key management facility system
calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>
Package: libapache2-mod-php5.6
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 4369
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php5.6
Version: 5.6.40-24+ubuntu18.04.1+deb.sury.org+1
Provides: libapache2-mod-php, phpapi-20131226
Depends: libmagic1, libpcre3 (>= 2:8.41), mime-support, php5.6-cli, php5.6-common (= 5.6.40-24+ubuntu18.04.1+deb.sury.org+1), php5.6-json, php5.6-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin, libc6 (>= 2.27), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
/etc/apache2/mods-available/php5.6.conf 7b91f8ac555faba6042a634ac4749a31
/etc/apache2/mods-available/php5.6.load f756d22de78a7988bdcc63f5471ae7df
Description: server-side, HTML-embedded scripting language (Apache 2 module)
This package provides the PHP module for the Apache 2 webserver (as
found in the apache2-mpm-prefork package). Please note that this package
ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
.
The following extensions are built in: Core date ereg filter hash libxml
mhash openssl pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: php-symfony-polyfill-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: php-symfony-polyfill
Version: 1.6.0-2
Depends: php-common
Suggests: php-mbstring
Description: Symfony polyfill for the Mbstring extension
This component provides a partial, native PHP implementation for the
Mbstring extension.
.
The Symfony Polyfill project backports features found in the latest PHP
versions and provides compatibility layers for some extensions and functions.
It is intended to be used when portability across PHP versions and extensions
is desired.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://symfony.com
Package: libreadline5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline5
Version: 5.2+dfsg-3build1
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 188
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.20-1ubuntu1
Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
/etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
/etc/newt/palette.ubuntu ac72ec93d29d94ad06bb3180f16cefb1
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
Newt is a windowing toolkit for text mode built from the slang library.
It allows color text mode applications to easily use stackable windows,
push buttons, check boxes, radio buttons, lists, entry fields, labels,
and displayable text. Scrollbars are supported, and forms may be nested
to provide extra functionality. This package contains the shared library
for programs that have been built with newt.
Homepage: https://fedorahosted.org/newt/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.1.0-3
Depends: libc6 (>= 2.15), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: lsof, strace
Description: interactive processes viewer
Htop is an ncursed-based process viewer similar to top, but it
allows one to scroll the list vertically and horizontally to see
all processes and their full command lines.
.
Tasks related to processes (killing, renicing) can be done without
entering their PIDs.
Original-Maintainer: Daniel Lange <DLange@debian.org>
Homepage: https://hisham.hm/htop/
Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 583
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 11.1.2ubuntu1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.14), libtinfo5 (>= 6), bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
/etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
/etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
/etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
This package contains lots of small programs many people expect to find when
they use a BSD-style Unix system.
.
It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
write (as bsd-write).
.
This package used to contain whois and vacation, which are now distributed in
their own packages. Also here was tsort, which is now in the "coreutils"
package.
Original-Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Package: libjs-async
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: node-async
Version: 0.8.0-3
Recommends: javascript-common
Description: functions and patterns for asynchronous code - web browsers
Async is a utility module which provides straight-forward, powerful
functions for working with asynchronous Javascript.
.
Async provides around 20 functions that include the usual 'functional'
suspects (map, reduce, filter, forEach…) as well as some common
patterns for asynchronous control flow (parallel, series, waterfall…).
All these functions assume you follow the Node convention of providing
a single callback as the last argument of your async function.
.
This provides async for use directly in web browsers.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/caolan/async
Package: libxft2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xft
Version: 2.3.2-1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.9.0), libfreetype6 (>= 2.3.5), libx11-6, libxrender1
Pre-Depends: multiarch-support
Description: FreeType-based font drawing library for X
Xft provides a client-side font API for X applications, making the FreeType
font rasterizer available to X clients. Fontconfig is used for font
specification resolution. Where available, the RENDER extension handles
glyph drawing; otherwise, the core X protocol is used.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.4
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: logcheck-database (<= 1.3.16~)
Conffiles:
/etc/logcheck/ignore.d.server/libsasl2-modules c032d5205f090a30661ae9f82a03f36e
Description: Cyrus SASL - pluggable authentication modules
This is the Cyrus SASL API implementation, version 2.1. See package
libsasl2-2 and RFC 2222 for more information.
.
This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
NTLM, CRAM-MD5, and DIGEST-MD5 (with DES support).
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Package: console-setup-linux
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1229
Maintainer: Ubuntu Installer Team <ubuntu-installer@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.178ubuntu2.7
Replaces: console-setup (<< 1.71), console-terminus, keyboard-configuration (<< 1.138)
Provides: console-terminus
Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.178ubuntu2.7), init-system-helpers (>= 1.29~) | initscripts
Suggests: console-setup
Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus, keyboard-configuration (<< 1.138)
Conflicts: console-setup-freebsd
Conffiles:
/etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777
/etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f
/etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed
/etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b
/etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247
/etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3
/etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae
/etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9
/etc/console-setup/compose.ISO-8859-1.inc 28f20a64f3f0b175cfaec4bce07465c2
/etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686
/etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243
/etc/console-setup/compose.ISO-8859-13.inc 5e9ad266f17ff2a0281a870079bc8284
/etc/console-setup/compose.ISO-8859-14.inc 360a44f83e8f8c9d463c9400dcc60de4
/etc/console-setup/compose.ISO-8859-15.inc 695ec832355223fb036629e4e6a9a963
/etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20
/etc/console-setup/compose.ISO-8859-2.inc c93ffa7f80e22c04c94e89a0cd742458
/etc/console-setup/compose.ISO-8859-3.inc 67b8fafc842a4dc9b3bc0c06af394834
/etc/console-setup/compose.ISO-8859-4.inc aba127ff3df5159c3070617a7efac46c
/etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da
/etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f
/etc/console-setup/compose.ISO-8859-7.inc 8f48a9f7c9f69ca828edbd7b276fe406
/etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b
/etc/console-setup/compose.ISO-8859-9.inc 05aae7589b5062a53f346f721cb0f7d3
/etc/console-setup/compose.KOI8-R.inc 8cfd7766b86e5e55d6e71d0d95519c92
/etc/console-setup/compose.KOI8-U.inc 217ee62f6982736276f41f760f8622f8
/etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89
/etc/console-setup/compose.VISCII.inc e4ffc74868adf4cc39ba61dd99581899
/etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd
/etc/console-setup/vtrgb 1fb3c13c4fcfa8cc4131aba905df559e
/etc/console-setup/vtrgb.vga 302837772c14006c7956211e184acfbd
/etc/init.d/console-setup.sh 510488b5120b580b673a15b75a5498b0
/etc/init.d/keyboard-setup.sh b868200c6e36ef87e27ead9a3ddad2db
Description: Linux specific part of console-setup
This package includes fonts in psf format and definitions of various
8-bit charmaps.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.5-1ubuntu2.5
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
/etc/login.defs 2a8f6cd8e00f54df72dc345a23f9db20
/etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
/etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
/etc/securetty d0124b1d2fb22d4ac9a91aa02ae6d6db
Description: system login tools
These tools are required to be able to login and use your system. The
login program invokes your user shell and enables command execution. The
newgrp program is used to change your effective group ID (useful for
workgroup type situations). The su program allows changing your effective
user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.07.1-2
Depends: libc6 (>= 2.14), libreadline7 (>= 6.0)
Description: GNU bc arbitrary precision calculator language
GNU bc is an interactive algebraic language with arbitrary precision which
follows the POSIX 1003.2 draft standard, with several extensions including
multi-character variable names, an `else' statement and full Boolean
expressions. GNU bc does not require the separate GNU dc program.
Original-Maintainer: Ryan Kavanagh <rak@debian.org>
Homepage: http://ftp.gnu.org/gnu/bc/
Package: linux-modules-5.4.0-1043-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69395
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1043.45~18.04.1
Config-Version: 5.4.0-1043.45~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: linux-modules-5.4.0-1092-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69606
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1092.100~18.04.2
Config-Version: 5.4.0-1092.100~18.04.2
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libgssapi3-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 313
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcom-err2 (>= 1.01), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimntlm0-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.4.0+git20110226)
Conflicts: libgssapi3
Description: Heimdal Kerberos - GSSAPI support library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the library for GSSAPI support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: linux-modules-5.4.0-1030-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65646
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1030.31~18.04.1
Config-Version: 5.4.0-1030.31~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpython2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2783
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.17-1~18.04ubuntu1.11
Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10)
Recommends: libpython2.7-stdlib
Breaks: python2.7-minimal (<< 2.7.4~rc1-1~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python2.7-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: mysql-client-core-5.7
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 29547
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mysql-5.7
Version: 5.7.42-0ubuntu0.18.04.1
Replaces: mysql-client-5.5, mysql-client-core-5.5, mysql-client-core-5.6 (<< 5.7), virtual-mysql-client-core
Provides: virtual-mysql-client-core
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.14), libedit2 (>= 2.11-20080614), libgcc1 (>= 1:4.0), liblz4-1 (>= 0.0~r130), libnuma1 (>= 2.0.11), libssl1.1 (>= 1.1.1), libstdc++6 (>= 5.2)
Breaks: mysql-client-core-5.6 (<< 5.7)
Conflicts: mysql-client-5.5, mysql-client-core-5.5, virtual-mysql-client-core
Description: MySQL database core client binaries
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
.
This package includes the core client files, as used by Akonadi.
Homepage: http://dev.mysql.com/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Package: libpci3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 103
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.5.2-1ubuntu1
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.14), libudev1 (>= 196), zlib1g (>= 1:1.1.4)
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
This package contains the libpci shared library files.
.
The libpci library provides portable access to configuration
registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Package: jsonlint
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.7.1-1
Depends: php-cli, php-common
Description: validating parser of JSON data structures
JSON (JavaScript Object Notation) is a lightweight data-interchange
format. It is easy for humans to read and write. It is easy for
machines to parse and generate. It is based on a subset of the
JavaScript Programming Language. JSON is a text format that is
completely language independent but uses conventions that are familiar
to programmers of the C-family of languages. These properties make JSON
an ideal data-interchange language.
.
This package provides jsonlint-php, a validating parser of JSON files.
Another more complete JSON syntax validator and formatter tool is
provided by the python-demjson package.
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Homepage: https://github.com/Seldaek/jsonlint
Package: python3-lib2to3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1033
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.6.9-1~18.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Provides: python3.6-lib2to3, python3.7-lib2to3, python3.8-lib2to3
Depends: python3 (>= 3.6.7-1~), python3 (<< 3.9)
Breaks: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Description: Interactive high-level object-oriented language (2to3, version 3.6)
Python is a high-level, interactive, object-oriented language. Its 3.6 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the lib2to3 library.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60+git20161116.90da8a0-1ubuntu1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
This package includes the important tools for controlling the network
subsystem of the Linux kernel. This includes arp, ifconfig, netstat,
rarp, nameif and route. Additionally, this package contains utilities
relating to particular network hardware types (plipconfig, slattach,
mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
.
In the upstream package 'hostname' and friends are included. Those are
not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/
Original-Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Package: python3-hyperlink
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: hyperlink
Version: 17.3.1-2
Depends: python3:any (>= 3.3.2-2~)
Description: Immutable, Pythonic, correct URLs.
Hyperlink provides a pure-Python implementation of immutable URLs. Based on
RFC 3986 and 3987, the Hyperlink URL makes working with both URIs and IRIs
easy.
.
This package provides the Python 3.x module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/python-hyper/hyperlink
Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 624
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.116ubuntu1
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl, ecryptfs-utils (>= 67-1)
Conffiles:
/etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
This package includes the 'adduser' and 'deluser' commands for creating
and removing users.
.
- 'adduser' creates new users and groups and adds existing users to
existing groups;
- 'deluser' removes users and groups and removes users from a given
group.
.
Adding users with 'adduser' is much easier than adding them manually.
Adduser will choose appropriate UID and GID values, create a home
directory, copy skeletal user configuration, and automate setting
initial values for the user's password, real name and so on.
.
Deluser can back up and remove users' home directories
and mail spool or all the files they own on the system.
.
A custom script can be executed after each of the commands.
.
Development mailing list:
http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1071-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10311
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1071.76~18.04.1
Config-Version: 5.4.0-1071.76~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1071-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1071-aws
Conflicts: linux-image-unsigned-5.4.0-1071-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1071.76~18.04.1)
Package: libzzip-0-13
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zziplib
Version: 0.13.62-3.1ubuntu0.18.04.1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library providing read access on ZIP-archives - library
The zziplib library is intentionally lightweight, it offers the ability
to easily extract data from files archived in a single zip file.
Applications can bundle files into a single zip archive and access them.
The implementation is based only on the (free) subset of compression
with the zlib algorithm which is actually used by the zip/unzip tools.
.
This package contains the zziplib runtime library.
Homepage: http://zziplib.sourceforge.net
Original-Maintainer: Scott Howard <showard@debian.org>
Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 313
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+19ubuntu7.1
Depends: lsb-base (>= 1.3-9ubuntu2)
Breaks: nux-tools (<< 4.0.8+18.04.20180613.5-0ubuntu1)
Conffiles:
/etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
/etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
/etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
/etc/X11/Xsession 50678401170c9c701d2375bd279690c5
/etc/X11/Xsession.d/20x11-common_process-args 862c8286749d25fe58dd98cad24c3fe4
/etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
/etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
/etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
/etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
/etc/X11/Xsession.d/60x11-common_localhost 2353ea72efc0c3e101058c3c56e282b4
/etc/X11/Xsession.d/60x11-common_xdg_path b4d4976a8dfa6ca2123f840fbfee76c7
/etc/X11/Xsession.d/90x11-common_ssh-agent ae74aadf705c5fccf841ef921b45ca72
/etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
/etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
/etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
/etc/init.d/x11-common 4bf46072f9f13b2e38d58a053def37d5
Description: X Window System (X.Org) infrastructure
x11-common contains the filesystem infrastructure required for further
installation of the X Window System in any configuration; it does not
provide a full installation of clients, servers, libraries, and utilities
required to run the X Window System.
.
A number of terms are used to refer to the X Window System, including "X",
"X Version 11", "X11", "X11R6", and "X11R7". The version of X used in
Debian is derived from the version released by the X.Org Foundation, and
is thus often also referred to as "X.Org". All of the preceding quoted
terms are functionally interchangeable in an Debian system.
Homepage: http://www.x.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libdns1100
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4622
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libisc169 (= 1:9.11.3+dfsg-1ubuntu1.18), libc6 (>= 2.14), libgeoip1, libgssapi-krb5-2 (>= 1.14+dfsg), libjson-c3 (>= 0.10), libkrb5-3 (>= 1.6.dfsg.2), libssl1.1 (>= 1.1.0), libxml2 (>= 2.7.4)
Description: DNS Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libdns shared library used by BIND's daemons and
clients.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: xdg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.1.2-1ubuntu2.5
Recommends: libfile-mimeinfo-perl, libnet-dbus-perl, libx11-protocol-perl, x11-utils, x11-xserver-utils
Description: desktop integration utilities from freedesktop.org
xdg-utils contains utilities for integrating applications with the
desktop environment, regardless of which desktop environment is used.
.
The following utilities are included:
.
* xdg-desktop-menu - Install desktop menu items
* xdg-desktop-icon - Install icons on the user's desktop
* xdg-email - Compose a new email in the user's preferred email client,
potentially with subject and other info filled in
* xdg-icon-resource - Install icon resources
* xdg-mime - Query and install MIME types and associations
* xdg-open - Open a URI in the user's preferred application that
handles the respective URI or file type
* xdg-screensaver - Enable, disable, or suspend the screensaver
* xdg-settings - Get or set the default web browser and URI handlers
Homepage: https://www.freedesktop.org/wiki/Software/xdg-utils/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Package: libsub-name-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.21-1build1
Depends: perl (>= 5.26.0-4), perlapi-5.26.0, libc6 (>= 2.4)
Description: module for assigning a new name to referenced sub
Sub::Name has only one function, which is also exported by default:
.
subname NAME, CODEREF
.
Assigns a new name to referenced sub. If package specification is
omitted in the name, then the current package is used. The return
value is the sub.
.
The name is only used for informative routines (caller, Carp, etc).
You won't be able to actually invoke the sub by the given name. To
allow that, you need to do glob-assignment yourself.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Sub-Name
Package: libext2fs2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.4
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.44.1-1ubuntu1.4)
Depends: libc6 (>= 2.17)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package provides the ext2fs and e2p libraries, for userspace software
that directly accesses extended file systems. Programs that use libext2fs
include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Package: libselinux1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 747
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.7-2build2
Provides: libselinux-dev
Depends: libselinux1 (= 2.7-2build2), libsepol1-dev (>= 2.7), libpcre3-dev
Conflicts: libselinux-dev
Description: SELinux development headers
This package provides the static libraries and header files
needed for developing SELinux applications. Security-enhanced Linux
is a patch of the Linux kernel and a number of utilities with
enhanced security functionality designed to add mandatory access
controls to Linux. The Security-enhanced Linux kernel contains new
architectural components originally developed to improve the security
of the Flask operating system. These architectural components provide
general support for the enforcement of many kinds of mandatory access
control policies, including those based on the concepts of Type
Enforcement, Role-based Access Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: ca-certificates
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20230311ubuntu0.18.04.1
Depends: openssl (>= 1.1.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
Contains the certificate authorities shipped with Mozilla's browser to allow
SSL-based applications to check for the authenticity of SSL connections.
.
Please note that Debian can neither confirm nor deny whether the
certificate authorities whose certificates are included in this package
have in any way been audited for trustworthiness or RFC 3647 compliance.
Full responsibility to assess them belongs to the local system
administrator.
Original-Maintainer: Michael Shuler <michael@pbandjelly.org>
Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-3build1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
This package contains the libacl.so dynamic library containing
the POSIX 1003.1e draft standard 17 functions for manipulating
access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/
Package: node-form-data
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.1.0-1
Depends: nodejs, node-combined-stream, node-mime, node-async
Description: Create multipart/form-data streams module for Node.js
node-form-data can be used to submit forms and file uploads to other
web applications.
.
The API of this module is inspired by the w3c XMLHttpRequest
specification.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/felixge/node-form-data
Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3820
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 4.15-1
Replaces: libbsd-dev (<< 0.8.4-1), manpages (<< 4.13-3)
Depends: manpages
Suggests: man-browser
Breaks: libbsd-dev (<< 0.8.4-1), manpages (<< 4.13-3)
Description: Manual pages about using GNU/Linux for development
These man pages describe the Linux programming interface, including
these two sections:
2 = Linux system calls.
3 = Library calls (note that a more comprehensive source of information
may be found in the glibc-doc and glibc-doc-reference packages).
Original-Maintainer: Martin Schulze <joey@debian.org>
Homepage: https://www.kernel.org/doc/man-pages/
Package: linux-aws-5.4-headers-5.4.0-1085
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71084
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1085.92~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1085/debian.README.gz for details
Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 4065
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.6p1-4ubuntu0.5
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libbsd0 (>= 0.7.0), libc6 (>= 2.26), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.14+dfsg), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.2), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Conffiles:
/etc/ssh/moduli fe5be9e1b2ad5c55132a3521ecaadcdd
/etc/ssh/ssh_config f7bf238a3b0bf155c565454a9f819731
Description: secure shell (SSH) client, for secure access to remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the ssh, scp and sftp clients, the ssh-agent
and ssh-add programs to make public key authentication more convenient,
and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
ssh replaces the insecure rsh, rcp and rlogin programs, which are
obsolete for most purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 576
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.1-1ubuntu1.18.04.1
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.1)
Description: terminal-related programs and man pages
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the programs used for manipulating the terminfo
database and individual terminfo entries, as well as some programs for
resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>
Package: python3-automat
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: automat
Version: 0.6.0-1
Depends: python3-attr, python3-six, python3:any (>= 3.3.2-2~)
Description: Self-service finite-state machines for the programmer on the go
Automat is a library for concise, idiomatic Python expression of
finite-state automata (particularly deterministic finite-state
transducers).
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/freeekanayaka/systemfixtures
Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 852
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg2 (<< 2.1.10-2)
Depends: adduser, gpgconf (= 2.2.4-1ubuntu1.6), lsb-base (>= 3.2-13), libassuan0 (>= 2.4.0), libc6 (>= 2.15), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.5.6), libgpg-error0 (>= 1.21), libksba8 (>= 1.3.4), libldap-2.4-2 (>= 2.4.7), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Breaks: gnupg2 (<< 2.1.10-2)
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
dirmngr is a server for managing and downloading OpenPGP and X.509
certificates, as well as updates and status signals related to those
certificates. For OpenPGP, this means pulling from the public
HKP/HKPS keyservers, or from LDAP servers. For X.509 this includes
Certificate Revocation Lists (CRLs) and Online Certificate Status
Protocol updates (OCSP). It is capable of using tor for network
access.
.
dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
among other tools. Unless this package is installed, the parts of
the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: libyaml-libyaml-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.69+repack-1
Depends: perl (>= 5.26.1-4), perlapi-5.26.1, libc6 (>= 2.11), libyaml-0-2
Description: Perl interface to libyaml, a YAML implementation
YAML::LibYAML (or YAML::XS) is a Perl interface to Kirill Siminov's libyaml
library, a YAML Ain't Markup Language (YAML) implementation written in C to
support the YAML 1.1 specification. The provided Dump and Load routines
are compatible with the Perl YAML module (see libyaml-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/YAML-LibYAML
Package: libfftw3-long3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 961
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.7-1
Replaces: libfftw3-3 (<< 3.3.3-1)
Depends: libc6 (>= 2.14), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Breaks: libfftw3-3 (<< 3.3.3-1)
Description: Library for computing Fast Fourier Transforms - Long precision
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the shared library
for long double precision transforms.
.
To get the static library and the header files, you need to install
libfftw3-dev. For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org
Package: linux-image-5.3.0-1032-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9163
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1032.34~18.04.2
Config-Version: 5.3.0-1032.34~18.04.2
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1032-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1032-aws
Conflicts: linux-image-unsigned-5.3.0-1032-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.17-2
Description: default fallback theme for FreeDesktop.org icon themes
This is the default fallback theme used by implementations of the
Freedesktop.org Icon Theme specification.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: linux-image-5.3.0-1034-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9187
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1034.36
Config-Version: 5.3.0-1034.36
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1034-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1034-aws
Conflicts: linux-image-unsigned-5.3.0-1034-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.2.52-3build1
Depends: libacl1 (= 2.2.52-3build1), libc6 (>= 2.14)
Description: Access control list utilities
This package contains the getfacl and setfacl utilities needed for
manipulating access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/
Package: libgs9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ghostscript
Version: 9.26~dfsg+0-0ubuntu0.18.04.18
Depends: libc6 (>= 2.14), libcups2 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.4.11), libidn11 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.11), libjpeg8 (>= 8c), liblcms2-2 (>= 2.6), libpaper1, libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.2.0), poppler-data, libgs9-common (= 9.26~dfsg+0-0ubuntu0.18.04.18)
Description: interpreter for the PostScript language and for PDF - Library
GPL Ghostscript is used for PostScript/PDF preview and printing.
Usually as a back-end to a program such as ghostview, it can display
PostScript and PDF documents in an X11 environment.
.
This package provides the Ghostscript library which makes the
facilities of GPL Ghostscript available to applications.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: irqbalance
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.3.0-0.1
Depends: libc6 (>= 2.14), libcap-ng0, libglib2.0-0 (>= 2.35.8), libncurses5 (>= 6), libnuma1 (>= 2.0.11), libsystemd0, libtinfo5 (>= 6), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.1)
Conffiles:
/etc/default/irqbalance 8b81ed451a4229dccd76185194b82864
/etc/init.d/irqbalance 341bea96d3abe6f0dd2a67af3442fbc6
Description: Daemon to balance interrupts for SMP systems
Daemon to balance interrupts across multiple CPUs, which can lead to
better performance and IO balance on SMP systems. This package is
especially useful on systems with multi-core processors, as interrupts
will typically only be serviced by the first core.
.
Note: irqbalance is not useful if you don't have more than one core
or socket.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://github.com/Irqbalance/irqbalance
Package: libharfbuzz-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 1.7.2-1ubuntu1
Depends: libharfbuzz0b (= 1.7.2-1ubuntu1), libharfbuzz-icu0 (= 1.7.2-1ubuntu1), libharfbuzz-gobject0 (= 1.7.2-1ubuntu1), gir1.2-harfbuzz-0.0 (= 1.7.2-1ubuntu1), libglib2.0-dev (>= 2.19.1), libgraphite2-dev, libicu-dev
Description: Development files for OpenType text shaping engine
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains the header files and static libraries for the
HarfBuzz library.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: linux-modules-5.4.0-1088-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69578
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1088.96~18.04.1
Config-Version: 5.4.0-1088.96~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-request
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.26.1-1
Depends: nodejs, node-form-data, node-node-uuid, node-mime, node-forever-agent, node-tunnel-agent, node-json-stringify-safe, node-qs, node-cookie-jar
Suggests: node-hawk, node-aws-sign, node-oauth-sign, node-http-signature
Description: simplified HTTP request client module for Node.js
node-request is an HTTP client with a simple API and a lot of features:
* streaming response
* multipart form upload
* HTTP auth
* OAuth signing
* Proxy
Some features are available as suggested Node.js modules.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/mikeal/request
Package: libglib2.0-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 278
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.56.4-0ubuntu0.18.04.9
Depends: libc6 (>= 2.4), libelf1 (>= 0.142), libglib2.0-0 (= 2.56.4-0ubuntu0.18.04.9), libglib2.0-data
Description: Programs for the GLib library
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package contains the program files which is used for the libraries
and others.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: dconf-gsettings-backend
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: d-conf
Version: 0.26.0-2ubuntu3
Provides: gsettings-backend
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.44.0), dconf-service (>= 0.26.0-2ubuntu3), dconf-service (<< 0.26.0-2ubuntu3.1~), libdconf1 (= 0.26.0-2ubuntu3)
Description: simple configuration storage system - GSettings back-end
DConf is a low-level key/value database designed for storing desktop
environment settings.
.
This package contains a back-end for GSettings. It is needed by
applications accessing settings through GSettings to set custom values
and listen for changes.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18825
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.27-3ubuntu1.5
Provides: libc-dev
Depends: libc6 (= 2.27-3ubuntu1.5), libc-dev-bin (= 2.27-3ubuntu1.5), linux-libc-dev
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.26), binutils-gold (<< 2.20.1-11), cmake (<< 2.8.4+dfsg.1-5), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gcc-4.6 (<< 4.6.0-12), libhwloc-dev (<< 1.2-3), libjna-java (<< 3.2.7-4), liblouis-dev (<< 2.3.0-2), liblouisxml-dev (<< 2.4.0-2), libperl5.26 (<< 5.26.1-3), make (<< 3.81-8.1), pkg-config (<< 0.26-1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
Contains the symlinks, headers, and object files needed to compile
and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.1a-3ubuntu1
Depends: libc6 (>= 2.14)
Description: S-Lang programming library - runtime version
S-Lang is a C programmer's library that includes routines for the rapid
development of sophisticated, user friendly, multi-platform applications.
.
This package contains only the shared library libslang.so.* and copyright
information. It is only necessary for programs that use this library (such
as jed and slrn). If you plan on doing development with S-Lang, you will
need the companion -dev package as well.
Built-Using: unicode-data (= 10.0.0-3)
Homepage: http://www.jedsoft.org/slang/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Package: libcurl4-gnutls-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.58.0-2ubuntu3.24
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.58.0-2ubuntu3.24)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Description: development files and documentation for libcurl (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>
Package: node-concat-map
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.1-1
Depends: nodejs
Description: concatenative mapdashery for Node.js
node-concat-map provides a single method concatMap(xs, fn) that will return
an array of concatenated elements by calling fn(x, i) for each element x and
each index i in the array xs.
.
When fn(x, i) returns an array, its result will be concatenated with the
result array. If fn(x, i) returns anything else, that value will be pushed
onto the end of the result array.
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/substack/node-concat-map
Package: node-ini
Status: install ok installed
Priority: extra
Section: javascript
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.4-1
Depends: nodejs
Description: ini format parser and serializer for Node.js
Read, manipulate and write ini files.
Sections are treated as nested objects.
Items before the first heading are saved on the object directly.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/ini
Package: linux-image-5.4.0-1086-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10311
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1086.93~18.04.1
Config-Version: 5.4.0-1086.93~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1086-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1086-aws
Conflicts: linux-image-unsigned-5.4.0-1086-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1086.93~18.04.1)
Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0pl1-128.1ubuntu1.2
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: anacron (>= 2.0-1), logrotate, checksecurity, exim4 | postfix | mail-transport-agent
Breaks: dpkg (<< 1.15.4)
Conffiles:
/etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/crontab 8f111d100ea459f68d333d63a8ef2205
/etc/default/cron bc9ab63f9e143d7338909d50494d552f
/etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
/etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
The cron daemon is a background process that runs particular programs at
particular times (for example, every minute, day, week, or month), as
specified in a crontab. By default, users may also create crontabs of
their own so that processes are run on their behalf.
.
Output from the commands is usually mailed to the system administrator
(or to the user in question); you should probably install a mail system
as well so that you can receive these messages.
.
This cron package does not provide any system maintenance tasks. Basic
periodic maintenance tasks are provided by other packages, such
as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/
Original-Maintainer: Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
libmnl is a minimalistic user-space library oriented to Netlink developers.
There are a lot of common tasks in parsing, validating, constructing of
both the Netlink header and TLVs that are repetitive and easy to get wrong.
This library aims to provide simple helpers that allows you to re-use code
and to avoid re-inventing the wheel.
.
The main features of this library are:
.
Small: the shared library requires around 30KB for an x86-based computer.
.
Simple: this library avoids complexity and elaborated abstractions that
tend to hide Netlink details.
.
Easy to use: the library simplifies the work for Netlink-wise developers.
It provides functions to make socket handling, message building,
validating, parsing and sequence tracking, easier.
.
Easy to re-use: you can use the library to build your own abstraction
layer on top of this library.
.
Decoupling: the interdependency of the main bricks that compose the
library is reduced, i.e. the library provides many helpers, but the
programmer is not forced to use them.
.
This package contains the shared libraries needed to run programs that use
the minimalistic Netlink communication library.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://netfilter.org/projects/libmnl/
Package: command-not-found-data
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2961
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: amd64
Source: command-not-found
Version: 18.04.5
Description: Set of data files for command-not-found.
This package provides the required data used by the command-not-found
application.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>
Package: linux-image-5.4.0-1088-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10311
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1088.96~18.04.1
Config-Version: 5.4.0-1088.96~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1088-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1088-aws
Conflicts: linux-image-unsigned-5.4.0-1088-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1088.96~18.04.1)
Package: libexif12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libexif
Version: 0.6.21-4ubuntu0.6
Depends: libc6 (>= 2.14)
Description: library to parse EXIF files
Most digital cameras produce EXIF files, which are JPEG files with
extra tags that contain information about the image. The EXIF library
allows you to parse an EXIF file and read the data from those tags.
Homepage: http://libexif.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Package: linux-image-5.4.0-1061-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10303
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1061.64~18.04.1+1
Config-Version: 5.4.0-1061.64~18.04.1+1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1061-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1061-aws
Conflicts: linux-image-unsigned-5.4.0-1061-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1061.64~18.04.1)
Package: python3-ptyprocess
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ptyprocess
Version: 0.5.2-1
Depends: python3:any (>= 3.3.2-2~)
Description: Run a subprocess in a pseudo terminal from Python 3
Launch a subprocess in a pseudo terminal (pty), and interact with both
the process and its pty.
.
Sometimes, piping stdin and stdout is not enough. There might be a password
prompt that doesn't read from stdin, output that changes when it's going to
a pipe rather than a terminal, or curses-style interfaces that rely on a
terminal. If you need to automate these things, running the process in a
pseudo terminal (pty) is the answer.
.
This package installs the library for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/pexpect/ptyprocess
Package: certbot
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 40
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 0.31.0-1+ubuntu18.04.1+certbot+1
Replaces: letsencrypt
Provides: letsencrypt
Depends: python3-certbot (= 0.31.0-1+ubuntu18.04.1+certbot+1), python3:any
Suggests: python3-certbot-apache, python3-certbot-nginx, python-certbot-doc
Breaks: letsencrypt (<= 0.6.0)
Conffiles:
/etc/cron.d/certbot b100f45b33319f91060b0a59721a0ede
/etc/letsencrypt/cli.ini dc5a5672c8f966a968ac0c98c447c14e
/etc/logrotate.d/certbot a815a66a333f2637c00055fcd44b02d4
Description: automatically configure HTTPS using Let's Encrypt
The objective of Certbot, Let's Encrypt, and the ACME (Automated
Certificate Management Environment) protocol is to make it possible
to set up an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This is
accomplished by running a certificate management agent on the web
server.
.
This agent is used to:
.
- Automatically prove to the Let's Encrypt CA that you control the website
- Obtain a browser-trusted certificate and set it up on your web server
- Keep track of when your certificate is going to expire, and renew it
- Help you revoke the certificate if that ever becomes necessary.
.
This package contains the main application, including the standalone
and the manual authenticators.
Homepage: https://certbot.eff.org/
Package: libgraphite2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.11-2
Depends: libgraphite2-3 (= 1.3.11-2)
Suggests: libgraphite2-utils
Description: Development files for libgraphite2
Graphite is a system that can be used to create and use "smart fonts" capable
of displaying writing systems with various complex behaviors, such as:
contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
stacking diacritics and complex positioning.
.
This library was designed and developed by the NRSI (Non-Roman Script
Initiative) within SIL International (www.sil.org) to act as a complement to
other smart font rendering technologies with limited practical local
extensibility. Its purpose is to help meet the needs of a very large number
of "minority language" communities for local extensibility of complex script
behaviors.
.
The behavior of the rendering engine for a given writing system is specified
through extra tables added to a TrueType font. These tables are generated by
compiling a GDL (Graphite Description Language) source file into a font using
grcompiler.
.
This package contains the development libraries for libgraphite2
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: http://graphite.sil.org/
Package: libwmf0.2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwmf
Version: 0.2.8.4-12
Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libx11-6, zlib1g (>= 1:1.1.4)
Recommends: gsfonts
Suggests: libwmf0.2-7-gtk
Description: Windows metafile conversion library
Windows metafile (WMF) is a picture format used by many Windows
programs, e.g. Microsoft Word. libwmf is a library for interpreting
metafile images and either displaying them using X or converting them
to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
.
This package contains the shared library.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.1-2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: IPC library for the GnuPG components
Libassuan is a small library implementing the so-called "Assuan
protocol". This protocol is used for IPC between most newer GnuPG
components. Both server and client side functions are provided.
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Package: node-fstream
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.10-1ubuntu0.18.04.1
Depends: nodejs, node-rimraf (>= 2), node-mkdirp (>= 0.5), node-graceful-fs (>= 3), node-inherits (>= 2)
Description: Advanced filesystem streaming tools for Node.js
node-fstream is a high-level file stream module for Node.js,
with a unified interface for reading and writing streams representing
files, directories or symbolic links, as well as manipulating their
attributes, such as atime/mtime or uid/guid.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/npm/fstream
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: linux-image-5.3.0-1035-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9187
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1035.37
Config-Version: 5.3.0-1035.37
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1035-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1035-aws
Conflicts: linux-image-unsigned-5.3.0-1035-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: texlive-latex-base
Status: install ok installed
Priority: optional
Section: tex
Installed-Size: 9976
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texlive-base
Version: 2017.20180305-1
Depends: tex-common (>= 6), fonts-lmodern, texlive-base (>= 2017.20170628), texlive-binaries (>= 2017.20170524.44437)
Suggests: texlive-latex-base-doc
Breaks: texlive-base (<< 2017.20170628)
Description: TeX Live: LaTeX fundamental packages
These packages are either mandated by the core LaTeX team, or very widely
used and strongly recommended in practice.
.
This package includes the following CTAN packages:
.
ae -- Virtual fonts for T1 encoded CMR-fonts
.
amscls -- AMS document classes for LaTeX
.
amsmath -- AMS mathematical facilities for LaTeX
.
babel -- Multilingual support for Plain TeX or LaTeX
.
babel-english -- Babel support for English
.
babelbib -- Multilingual bibliographies
.
carlisle -- David Carlisle's small packages
.
colortbl -- Add colour to LaTeX tables
.
fancyhdr -- Extensive control of page headers and footers in LaTeX2e
.
fix2col -- Fix miscellaneous two column mode features
.
geometry -- Flexible and complete interface to document dimensions
.
graphics -- The LaTeX standard graphics bundle
.
graphics-cfg -- Sample configuration files for LaTeX color and graphics
.
hyperref -- Extensive support for hypertext in LaTeX
.
latex -- A TeX macro package that defines LaTeX
.
latex-bin -- LaTeX executables and man pages
.
latex-fonts -- A collection of fonts used in LaTeX distributions
.
latexconfig -- configuration files for LaTeX-related formats
.
ltxmisc -- Miscellaneous LaTeX packages, etc
.
mfnfss -- Packages to typeset oldgerman and pandora fonts in LaTeX
.
mptopdf -- mpost to PDF, native MetaPost graphics inclusion
.
natbib -- Flexible bibliography support
.
oberdiek -- A bundle of packages submitted by Heiko Oberdiek
.
pslatex -- Use PostScript fonts by default
.
psnfss -- Font support for common PostScript fonts
.
pspicture -- PostScript picture support
.
tools -- The LaTeX standard tools bundle
.
url -- Verbatim with URL-sensitive line breaks
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.tug.org/texlive/
Package: linux-modules-5.4.0-1035-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65677
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1035.37~18.04.1
Config-Version: 5.4.0-1035.37~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-mkdirp
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.5.1-1
Depends: nodejs
Description: Recursively create directories - Node.js module
mkdirp is a Node.js module to recursively create directories,
emulating mkdir -p shell command.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/substack/node-mkdirp
Package: apachetop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.12.6-18build2
Depends: libadns1 (>= 1.5.0~), libc6 (>= 2.15), libgamin0 | libfam0, libgcc1 (>= 1:3.0), libncurses5 (>= 6), libreadline7 (>= 6.0), libstdc++6 (>= 5), libtinfo5 (>= 6), gamin
Description: Realtime Apache monitoring tool
Apache top is a curses-based realtime utility to display information from a
running copy of Apache.
.
It is modelled after the standard 'top' utility, and displays information such
as the requests pers second, bytes per second and the most popular URLs
displayed.
.
It must be run from a machine running Apache, as it works by processing the
logfiles found in /var/log/apache.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://www.webta.org/projects/apachetop/
Package: xdg-user-dirs
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 533
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.17-1ubuntu1
Depends: libc6 (>= 2.14)
Conffiles:
/etc/xdg/autostart/xdg-user-dirs.desktop 284e639a243bfb86fc415ce448e8fa35
/etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
/etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
Description: tool to manage well known user directories
xdg-user-dirs is a tool to help manage "well known" user directories
like the desktop folder and the music folder. It also handles
localization (i.e. translation) of the filenames.
.
The way it works is that xdg-user-dirs-update is run very early in the
login phase. This program reads a configuration file, and a set of
default directories. It then creates localized versions of these
directories in the users home directory and sets up a config file in
$(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
~/.config) that applications can read to find these directories.
Homepage: http://www.freedesktop.org/wiki/Software/xdg-user-dirs
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: libc-ares2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: c-ares
Version: 1.14.0-1ubuntu0.2
Replaces: libc-ares1
Depends: libc6 (>= 2.17)
Conflicts: libcares2
Description: asynchronous name resolver
c-ares is a C library that performs DNS requests and name resolution
asynchronously.
.
It is a fork of the library named "ares", with additional features:
* IPv6 support;
* extended cross-platform portability;
* 64-bit clean sources.
.
This package provides the shared libraries.
Homepage: https://c-ares.haxx.se/
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Package: linux-image-5.3.0-1033-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9187
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1033.35
Config-Version: 5.3.0-1033.35
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.3.0-1033-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.3-doc-5.3.0 | linux-aws-5.3-source-5.3.0, linux-aws-5.3-tools, linux-headers-5.3.0-1033-aws
Conflicts: linux-image-unsigned-5.3.0-1033-aws
Description: Linux kernel image for version 5.3.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.3.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 202
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.13-2~ubuntu18.04
Depends: libc6 (>= 2.14), libxau6, libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
This package contains the library files needed to run software using libxcb,
the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://xcb.freedesktop.org
Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.16.0-1ubuntu1.1~18.04.4
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.14), libwayland-client0 (>= 1.3.92)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - cursor library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: locales
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 14132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: glibc
Version: 2.27-3ubuntu1.5
Replaces: libc-bin (<< 2.23), manpages-fr-extra (<< 20141022)
Depends: libc-bin (>> 2.27), debconf (>= 0.5) | debconf-2.0
Breaks: libc-bin (<< 2.23)
Conffiles:
/etc/locale.alias d7a66c8ca60c85abc6f2db2b43209105
Description: GNU C Library: National Language (locale) data [support]
Machine-readable data files, shared objects and programs used by the
C library for localization (l10n) and internationalization (i18n) support.
.
This package contains tools to generate locale definitions from source
files (included in this package). It allows you to customize which
definitions actually get generated. This is a space-saver over how this
package used to be, with all locales generated by default. This created
a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git
Package: python3-tz
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-tz
Version: 2018.3-2
Depends: tzdata, python3:any (>= 3.3.2-2~)
Description: Python3 version of the Olson timezone database
python-tz brings the Olson tz database into Python. This library allows
accurate and cross platform timezone calculations using Python 2.3 or higher.
It also solves the issue of ambiguous times at the end of daylight savings,
which you can read more about in the Python Library Reference
(datetime.tzinfo).
.
This package contains the Python 3 version of the library.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://pypi.python.org/pypi/pytz/
Package: libtexluajit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 546
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: texlive-bin
Version: 2017.20170613.44572-8ubuntu0.2
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.3)
Description: TeX Live: LuaJIT, modified for use with LuaJITTeX
The LuaJIT library as used within LuaJITTeX.
Homepage: http://www.tug.org/texlive/
Original-Maintainer: Debian TeX Maintainers <debian-tex-maint@lists.debian.org>
Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 259
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-debian
Version: 0.1.32
Depends: python3-chardet, python3-six (>> 1.4~), python3:any (>= 3.3.2-2~)
Recommends: python3-apt
Suggests: gpgv
Description: Python 3 modules to work with Debian-related data formats
This package provides Python 3 modules that abstract many formats of Debian
related files. Currently handled are:
* Debtags information (debian.debtags module)
* debian/changelog (debian.changelog module)
* Packages files, pdiffs (debian.debian_support module)
* Control files of single or multiple RFC822-style paragraphs, e.g.
debian/control, .changes, .dsc, Packages, Sources, Release, etc.
(debian.deb822 module)
* Raw .deb and .ar files, with (read-only) access to contained
files and meta-information
Original-Maintainer: Debian python-debian Maintainers <pkg-python-debian-maint@lists.alioth.debian.org>
Package: libnih1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 135
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnih
Version: 1.0.3-6ubuntu2
Pre-Depends: libc6 (>= 2.15~)
Description: NIH Utility Library
libnih is a light-weight "standard library" of C functions to ease the
development of other libraries and applications, especially those
normally found in /lib.
.
This package contains the shared library.
Homepage: https://launchpad.net/libnih
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Package: ssh-import-id
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 53
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 5.7-0ubuntu1.1
Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), wget, python3:any (>= 3.3.2-2~)
Recommends: openssh-server
Conffiles:
/etc/ssh/ssh_import_id f92d9edbab801eed9d6b464975da229f
Description: securely retrieve an SSH public key and install it locally
This utility will securely contact a public keyserver (Launchpad.net by
default, but Github.com is also supported), retrieve one or more user's
public keys, and append these to the current user's ~/.ssh/authorized_keys
file.
Homepage: http://launchpad.net/ssh-import-id
Package: libharfbuzz-gobject0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 1.7.2-1ubuntu1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.19.1), libharfbuzz0b (>= 0.9.9)
Description: OpenType text shaping engine ICU backend (GObject library)
HarfBuzz is an implementation of the OpenType Layout engine (aka layout
engine) and the script-specific logic (aka shaping engine).
.
This package contains the GObject library, providing wrapper GObject type
bindings for all HarfBuzz objects and enums.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Package: liblwres160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.11.3+dfsg-1ubuntu1.18
Depends: libc6 (>= 2.15)
Description: Lightweight Resolver Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the liblwres shared library used by BIND's daemons
and clients.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Package: libmcrypt4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libmcrypt
Version: 2.5.8-3.3
Depends: libc6 (>= 2.14)
Suggests: libmcrypt-dev, mcrypt
Description: De-/Encryption Library
libmcrypt is the library which implements all the algorithms and
modes found in mcrypt.
.
libmcrypt supports the algorithms: BLOWFISH, TWOFISH, DES, TripleDES,
3-WAY, SAFER-sk64, SAFER-sk128, SAFER+, LOKI97, GOST, RC2, RC6, MARS,
IDEA, RIJNDAEL-128, RIJNDAEL-192, SERPENT, RIJNDAEL-256, CAST-128
(known as CAST5), CAST-256, ARCFOUR, ENIGMA, PANAMA, XTEA and WAKE.
Block algorithms can be used in: CBC, ECB, CFB and OFB (8 bit and n
bit, where n is the size of the algorithm's block length).
.
More information can be found at the libmcrypt homepage
http://mcrypt.sourceforge.net/ .
Original-Maintainer: RISKO Gergely <risko@debian.org>
Homepage: http://mcrypt.sourceforge.net/
Package: python3-distutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2036
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.6.9-1~18.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2)
Provides: python3.6-distutils, python3.7-distutils, python3.8-distutils
Depends: python3 (>= 3.6.7-1~), python3 (<< 3.9), python3-lib2to3 (>= 3.6.4)
Breaks: libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2)
Description: distutils package for Python 3.x
Distutils package for Python 3.x. This package contains the distutils module
from the Python standard library.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: linux-modules-5.4.0-1085-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69748
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1085.92~18.04.1
Config-Version: 5.4.0-1085.92~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: node-minimatch
Status: install ok installed
Priority: extra
Section: javascript
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.4-3+deb10u1build0.18.04.1
Depends: nodejs, node-brace-expansion (>= 1.1.7)
Description: Convert glob expressions into RegExp objects for Node.js
A pure javascript, not strictly compatible, implementation of fnmatch/glob.
Supports negation, comment, double-star, brace expansion.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/minimatch
Package: libcdt5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Depends: libc6 (>= 2.4)
Conflicts: libgraphviz4
Description: rich set of graph drawing tools - cdt library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the cdt library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.11.0-0.1ubuntu1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Suggests: bsd-mailx | mailx
Breaks: postgresql-common (<= 126)
Conffiles:
/etc/cron.daily/logrotate da9c29ed0b408ffd88d05c3d8e881e94
/etc/logrotate.conf 4316e462f3c800bebcf43aa9d4fcf4b0
Description: Log rotation utility
The logrotate utility is designed to simplify the administration of
log files on a system which generates a lot of log files. Logrotate
allows for the automatic rotation compression, removal and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly or when the log file gets to a certain size. Normally, logrotate
runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate
Original-Maintainer: Paul Martin <pm@debian.org>
Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 31840
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.17.1-1ubuntu0.18
Replaces: git-core (<< 1:1.7.0.4-1.), gitweb (<< 1:1.7.4~rc1)
Provides: git-completion, git-core
Depends: libc6 (>= 2.16), libcurl3-gnutls (>= 7.16.2), libexpat1 (>= 2.0.1), libpcre3, zlib1g (>= 1:1.2.0), perl, liberror-perl, git-man (>> 1:2.17.1), git-man (<< 1:2.17.1-.)
Recommends: patch, less, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-el, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), git-buildpackage (<< 0.6.5), git-core (<< 1:1.7.0.4-1.), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), gitweb (<< 1:1.7.4~rc1), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
/etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides the git main components with minimal dependencies.
Additional functionality, e.g. a graphical user interface and revision
tree visualizer, tools for interoperating with other VCS's, or a web
interface, is provided as separate git* packages.
Homepage: https://git-scm.com/
Original-Maintainer: Gerrit Pape <pape@smarden.org>
Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.16.0-1ubuntu1.1~18.04.4
Replaces: libwayland-egl1-mesa (<< 18.0.5-0ubuntu0)
Provides: libwayland-egl1-mesa
Depends: libc6 (>= 2.2.5)
Breaks: libwayland-egl1-mesa (<< 18.0.5-0ubuntu0)
Description: wayland compositor infrastructure - EGL library
Wayland is a protocol for a compositor to talk to its clients as well
as a C library implementation of that protocol. The compositor can be
a standalone display server running on Linux kernel modesetting and
evdev input devices, an X application, or a wayland client
itself. The clients can be traditional applications, X servers
(rootless or fullscreen) or other display servers.
.
This package ships the library that implements the Wayland EGL platform
of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: node-once
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 14
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.4.0-2ubuntu1
Depends: nodejs, node-wrappy
Description: Run a function only once with this module for Node.js
node-once is useful to make sure a listener for multiple events is
only run once.
.
Node.js is an event-based server-side javascript engine.
Homepage: https://github.com/isaacs/once
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libheimntlm0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1ubuntu0.4
Depends: libc6 (>= 2.4), libhcrypto4-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - NTLM support library
Heimdal is a free implementation of Kerberos 5 that aims to be
compatible with MIT Kerberos.
.
This package contains the NTLM support library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>
Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 717
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.7-1ubuntu0.1
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
Security-enhanced Linux is a patch of the Linux kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.
.
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Package: nodejs-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1378
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: nodejs
Version: 8.10.0~dfsg-2ubuntu0.4
Depends: python, libssl1.0-dev (>= 1.0.2), libuv1-dev (>= 1.15.0), nodejs (= 8.10.0~dfsg-2ubuntu0.4)
Suggests: debhelper
Description: evented I/O for V8 javascript (development files)
Node.js is a platform built on Chrome's JavaScript runtime for easily
building fast, scalable network applications. Node.js uses an
event-driven, non-blocking I/O model that makes it lightweight and
efficient, perfect for data-intensive real-time applications that run
across distributed devices.
.
This package is needed to build plugins.
Homepage: http://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.14)
Description: GNU Transactional Memory Library
GNU Transactional Memory Library (libitm) provides transaction support for
accesses to the memory of a process, enabling easy-to-use synchronization of
accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: linux-modules-5.4.0-1063-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69567
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1063.66~18.04.1
Config-Version: 5.4.0-1063.66~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.6.4-3ubuntu0.4
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
This package provides the locale data files for libx11.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: libpython2.7-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8775
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.17-1~18.04ubuntu1.11
Replaces: libpython2.7-testsuite (<< 2.7.13-4), python2.7 (<< 2.7.5-0~)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: libpython2.7-minimal (= 2.7.17-1~18.04ubuntu1.11), libssl1.1 (>= 1.1.1), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libexpat1 (>= 2.1~beta3), libffi6 (>= 3.0.4), libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: cython (<< 0.25.2-2build3), python-lxml (<< 3.8.0-2), python-numpy (<< 1:1.12.1-3.1ubuntu1), python-scipy (<< 0.18.1-2ubuntu3), python-tk (<< 2.7.14~rc1-1~), python-urllib3 (<< 1.9.1-3)
Description: Interactive high-level object-oriented language (standard library, version 2.7)
Python is a high-level, interactive, object-oriented language. Its 2.7 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 2.7's standard library. It is normally not
used on its own, but as a dependency of python2.7.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: diffstat
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.61-1build1
Depends: libc6 (>= 2.14)
Description: produces graph of changes introduced by a diff file
This program is a simple filter that reads the output of the 'diff' program,
and produces a histogram of the total number of lines that were changed.
It is useful for scanning a patch file to see which files were changed.
Original-Maintainer: Sandro Tosi <morph@debian.org>
Homepage: http://invisible-island.net/diffstat/
Package: python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 624
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.15~rc1-1
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.15~rc1-1~), libpython-stdlib (= 2.7.15~rc1-1)
Pre-Depends: python-minimal (= 2.7.15~rc1-1)
Suggests: python-doc (= 2.7.15~rc1-1), python-tk (>= 2.7.15~rc1-1~)
Breaks: update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python version (currently v2.7).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/
Cnf-Extra-Commands: python
Cnf-Priority-Bonus: 3
Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.8-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 authorisation library
This package provides the main interface to the X11 authorisation handling,
which controls authorisation for X connections, both client-side and
server-side.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXau
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: networkd-dispatcher
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.7-0ubuntu3.5
Depends: gir1.2-glib-2.0, python3-dbus, python3-gi, python3:any
Suggests: iw | wireless-tools
Conffiles:
/etc/default/networkd-dispatcher 30d74108d00da7497f70395c32658a41
Description: Dispatcher service for systemd-networkd connection status changes
Networkd-dispatcher is a dispatcher daemon for systemd-networkd
connection status changes. It is similar to NetworkManager-dispatcher,
but is much more limited in the types of events it supports due to the
limited nature of systemd-networkd.
Homepage: https://github.com/craftyguy/networkd-dispatcher
Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyjwt
Version: 1.5.3+ds1-1ubuntu0.1
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
PyJWT implements the JSON Web Token draft 01, a way of representing
signed content using JSON data structures.
.
Supported algorithms for cryptographic signing:
.
* HS256 - HMAC using SHA-256 hash algorithm (default)
* HS384 - HMAC using SHA-384 hash algorithm
* HS512 - HMAC using SHA-512 hash algorithm
* RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
algorithm
* RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
algorithm
* RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
algorithm
.
Supported reserved claim names:
- "exp" (Expiration Time) Claim
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Package: autopoint
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 445
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gettext
Version: 0.19.8.1-6ubuntu0.3
Replaces: gettext (<= 0.17-11)
Depends: xz-utils
Description: The autopoint program from GNU gettext
The `autopoint' program copies standard gettext infrastructure files
into a source package. It extracts from a macro call of the form
`AM_GNU_GETTEXT_VERSION(VERSION)', found in the package's
`configure.in' or `configure.ac' file, the gettext version used by the
package, and copies the infrastructure files belonging to this version
into the package.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Package: libidn11
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.33-2.1ubuntu1
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
GNU Libidn is a fully documented implementation of the Stringprep,
Punycode and IDNA specifications. Libidn's purpose is to encode and
decode internationalized domain names. The Nameprep, XMPP, SASLprep,
and iSCSI profiles are supported.
.
This package contains the shared library.
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Homepage: https://www.gnu.org/software/libidn/
Package: libmpdec2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.4.2-1ubuntu1
Replaces: libmpdec2.3
Depends: libc6 (>= 2.14)
Breaks: libmpdec2.3
Description: library for decimal floating point arithmetic (runtime library)
mpdecimal is a package for correctly-rounded arbitrary precision decimal
floating point arithmetic.
Homepage: http://www.bytereef.org/mpdecimal/index.html
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: fuse
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.9.7-1ubuntu1
Depends: libc6 (>= 2.14), libfuse2 (= 2.9.7-1ubuntu1), adduser, mount (>= 2.19.1), sed (>= 4)
Conffiles:
/etc/fuse.conf 298587592c8444196833f317def414f2
Description: Filesystem in Userspace
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Package: rsyslog
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.32.0-1ubuntu4.2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.27), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.7), libsystemd0 (>= 209), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.47~), lsb-base (>= 3.2-14), adduser, ucf
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp, apparmor (>= 2.8.96~2541-0ubuntu4~)
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
/etc/apparmor.d/usr.sbin.rsyslogd 1d7263e852f18f89b136525ba4033166
/etc/default/rsyslog c7af23c348917e877399baea1849727a
/etc/init.d/rsyslog bd41a0654a192d74dfb9c551b06fa855
/etc/logcheck/ignore.d.server/rsyslog d77ab13caf836413b9debd906948d761
/etc/logrotate.d/rsyslog 8159203bf98416c898849057f585e31f
/etc/rsyslog.conf d1d930c884e1f403e821ec09e18cfd2e
Description: reliable system and kernel logging daemon
Rsyslog is a multi-threaded implementation of syslogd (a system utility
providing support for message logging), with features that include:
* reliable syslog over TCP, SSL/TLS and RELP
* on-demand disk buffering
* email alerting
* writing to MySQL or PostgreSQL databases (via separate output plugins)
* permitted sender lists
* filtering on any part of the syslog message
* on-the-wire message compression
* fine-grained output format control
* failover to backup destinations
* enterprise-class encrypted syslog relaying
.
It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/
Original-Maintainer: Michael Biebl <biebl@debian.org>
Package: libclass-accessor-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.51-1
Depends: perl, libsub-name-perl
Description: Perl module that automatically generates accessors
Class::Accessor automagically generates accessor/mutator methods for your
class. Most of the time, writing accessors is an exercise in cutting and
pasting. If you make your module a subclass of Class::Accessor and declare
your accessor fields with mk_accessors() then you will find yourself with a
set of automatically generated accessors which can even be customized.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Class-Accessor
Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrandr
Version: 2:1.5.1-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
libXrandr provides an X Window System client interface to the RandR
extension to the X protocol.
.
The RandR extension allows for run-time configuration of display attributes
such as resolution, rotation, and reflection.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXrandr
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 42
Maintainer: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2018.02.28
Replaces: ubuntu-cloudimage-keyring (<< 2018.02.05)
Breaks: ubuntu-cloudimage-keyring (<< 2018.02.05)
Description: GnuPG keys of the Ubuntu archive
The Ubuntu project digitally signs its Release files. This package
contains the archive keys used for that.
Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-20ubuntu0.18.04.6
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213)
Description: PolicyKit Authorization API
PolicyKit is a toolkit for defining and handling the policy that
allows unprivileged processes to speak to privileged processes.
.
This package contains a library for accessing PolicyKit.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libdbus-1-3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.12.2-1ubuntu1.4
Depends: libc6 (>= 2.17), libsystemd0
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: libip6tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.1-2ubuntu2
Depends: libc6 (>= 2.14)
Description: netfilter libip6tc library
The user-space iptables (IPv6) C library from the Netfilter xtables framework.
.
iptables IPv6 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Package: gamin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.1.10-5build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.35.9), libgamin0 (= 0.1.10-5build1)
Conflicts: fam
Conffiles:
/etc/gamin/gaminrc 5b53411b4716625a20369a05110a5fd1
Description: File and directory monitoring system
Gamin is a file and directory monitoring system which allows
applications to detect when a file or a directory has been added,
removed or modified by somebody else.
.
It can be used by desktops like KDE, GNOME or Xfce to have their
virtual file systems keep track of changes to files and directories.
For example, if a file manager displays a directory to the user, and
the user removes one of the files via the command-line, gamin will
notify the file manager of this change so that it can update the
directory display.
.
Gamin has been designed as a drop-in replacement for FAM with security
and maintainability in mind and can use Linux's advanced inotify
service when available.
Original-Maintainer: Michael Banck <mbanck@debian.org>
Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8 (8.4.0-1ubuntu1~18.04)
Version: 1:8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
Shared version of the support library, a library of internal subroutines
that GCC uses to overcome shortcomings of particular machines, or
special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Package: libsombok3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sombok
Version: 2.4.0-1
Depends: libthai0 (>= 0.1.12), libc6 (>= 2.14)
Description: Unicode Text Segmentation library
Sombok library performs Line Breaking Algorithm described in Unicode
Standards Annex #14 (UAX #14). East_Asian_Width informative properties
defined by Annex #11 (UAX #11) may be concerned to determin breaking
positions. This library also implements “default” Grapheme Cluster
segmentation described in Annex #29 (UAX #29).
Original-Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Homepage: http://sourceforge.net/projects/linefold/
Package: python3-distupgrade
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 635
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:18.04.25
Replaces: python3-update-manager (<< 1:0.165)
Depends: python3:any (>= 3.3.2-2~), python3-update-manager (>= 1:0.196.2~), python3-apt (>= 0.8.5~), gpgv, lsb-release, sensible-utils
Breaks: python3-update-manager (<< 1:0.165)
Description: manage release upgrades
This is the DistUpgrade Python 3 module
Package: s3fs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: s3fs-fuse
Version: 1.82-1
Depends: fuse, mime-support, libc6 (>= 2.17), libcurl3-gnutls (>= 7.16.2), libfuse2 (>= 2.8), libgcc1 (>= 1:3.0), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.5.0), libstdc++6 (>= 5.2), libxml2 (>= 2.7.4)
Description: FUSE-based file system backed by Amazon S3
s3fs is a FUSE filesystem that allows you to mount an Amazon S3 bucket
as a local filesystem. It stores files natively and transparently in
S3 (i.e., you can use other programs to access the same files).
Maximum file size=64GB (limited by s3fs, not Amazon).
.
s3fs is stable and is being used in a number of production environments,
e.g., rsync backup to s3.
Original-Maintainer: Andriy Senkovych <jolly_roger@itblog.org.ua>
Homepage: https://github.com/s3fs-fuse/s3fs-fuse
Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.31.1-0.4ubuntu3.7
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (<< 2.29.2-3~), s390-tools (<< 1.37.0-0ubuntu7~), sysvinit-utils (<< 2.88dsf-59.1~)
Depends: fdisk
Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.31.1), libc6 (>= 2.25), libmount1 (>= 2.25), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.30.2), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), grml-debootstrap (<< 0.68), mount (<< 2.29.2-3~), s390-tools (<< 1.37.0-0ubuntu7~), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
/etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
/etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
/etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
This package contains a number of important utilities, most of which
are oriented towards maintenance of your system. Some of the more
important utilities included in this package allow you to view kernel
messages, create new filesystems, view block device information,
interface with real time clock, etc.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1086
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.6
Replaces: gnupg (<< 2.1.21-4)
Depends: gpgconf (= 2.2.4-1ubuntu1.6), libassuan0 (>= 2.0.1), libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), libreadline7 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.2.4-1ubuntu1.6)
Breaks: gnupg (<< 2.1.21-4)
Description: GNU Privacy Guard -- minimalist public key operations
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains /usr/bin/gpg itself, and is useful on its own
only for public key operations (encryption, signature verification,
listing OpenPGP certificates, etc). If you want full capabilities
(including secret key operations, network access, etc), please
install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 563
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.12.6-0ubuntu2
Replaces: fontconfig-config (<< 2.5.93-1)
Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), fontconfig-config
Pre-Depends: dpkg (>= 1.16.1)
Description: generic font configuration library - support binaries
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
Fontconfig is not a rasterization library, nor does it impose a
particular rasterization library on the application. The X-specific
library 'Xft' uses fontconfig along with freetype to specify and
rasterize fonts.
.
This package contains a program to maintain the fontconfig cache
(fc-cache), a sample program to list installed fonts (fc-list), a program
to test the matching rules (fc-match) and a program to dump the binary
cache files in string form (fc-cat). It no longer makes fonts managed by defoma
available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Keith Packard <keithp@debian.org>
Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.08-1.2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: data compression library
LZO is a portable, lossless data compression library.
It offers pretty fast compression and very fast decompression.
Decompression requires no memory. In addition there are slower
compression levels achieving a quite competitive compression ratio
while still decompressing at this very high speed.
Original-Maintainer: Peter Eisentraut <petere@debian.org>
Homepage: http://www.oberhumer.com/opensource/lzo/
Package: linux-image-5.4.0-1043-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9228
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1043.45~18.04.1
Config-Version: 5.4.0-1043.45~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1043-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1043-aws
Conflicts: linux-image-unsigned-5.4.0-1043-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-pyinotify
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyinotify
Version: 0.9.6-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-pyinotify-doc
Description: simple Linux inotify Python bindings
pyinotify is a simple wrapper for the Linux inotify mechanism.
.
inotify is a Linux Kernel feature available since 2.6.13. inotify makes
it possible for applications to easily be notified of filesystem changes.
.
This is the Python 3 version of the package.
Original-Maintainer: Mikhail Gusarov <dottedmag@debian.org>
Homepage: https://github.com/seb-m/pyinotify
Package: fonts-lmodern
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 10756
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lmodern
Version: 2.004.5-3
Replaces: lmodern (<= 2.004.2-1)
Breaks: lmodern (<= 2.004.2-1)
Conffiles:
/etc/fonts/conf.avail/65-fonts-lmodern.conf d747c3c8c33e2a6a712bf8ee27bd3c7c
Description: OpenType fonts based on Computer Modern
The Latin Modern fonts, also known as "lm fonts", are a set of
scalable fonts in PostScript Type 1 and OpenType formats. They are
based on the PostScript Type 1 version of the Computer Modern fonts
and contain many additional characters (mostly accented ones).
.
This package provides the OpenType variant of these fonts. For support
for TeX and Type 1 (PostScript) fonts, see the lmodern package.
.
The Latin Modern fonts were generated using MetaType1, a program
based on MetaPost for generating PostScript Type 1 fonts
(ftp://bop.eps.gda.pl/pub/metatype1/). Their size is reasonable and
they are usually considered to be of good quality (compared to
cm-super, for instance; however, cm-super contains font families
that have no equivalent in this package; additionally, there are
character sets that are supported by cm-super and not by the Latin
Modern fonts).
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Homepage: http://www.gust.org.pl/projects/e-foundry/latin-modern/
Package: linux-image-5.4.0-1038-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9162
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1038.40~18.04.1
Config-Version: 5.4.0-1038.40~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1038-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1038-aws
Conflicts: linux-image-unsigned-5.4.0-1038-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3686
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python2.7
Version: 2.7.17-1~18.04ubuntu1.11
Replaces: python2.7 (<< 2.7.8-7~)
Depends: libpython2.7-minimal (= 2.7.17-1~18.04ubuntu1.11)
Pre-Depends: libc6 (>= 2.15), zlib1g (>= 1:1.2.0)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 2.7)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-27
Depends: libc6 (>= 2.14)
Description: Wietse Venema's TCP wrappers library
Wietse Venema's network logger, also known as TCPD or LOG_TCP.
.
These programs log the client host name of incoming telnet,
ftp, rsh, rlogin, finger etc. requests.
.
Security options are:
- access control per host, domain and/or service;
- detection of host name spoofing or host address spoofing;
- booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: python3-dateutil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 261
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-dateutil
Version: 2.6.1-1
Depends: python3-six (>= 1.5), python3:any (>= 3.3.2-2~), tzdata
Description: powerful extensions to the standard Python 3 datetime module
It features:
.
* computing of relative deltas (next month, next year, next monday, last week
of month, etc);
* computing of relative deltas between two given date and/or datetime objects
* computing of dates based on very flexible recurrence rules, using a superset
of the iCalendar specification. Parsing of RFC strings is supported as well.
* generic parsing of dates in almost any string format
* timezone (tzinfo) implementations for tzfile(5) format files
(/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all
known formats), iCalendar format files, given ranges (with help from
relative deltas), local machine timezone, fixed offset timezone, UTC
timezone
* computing of Easter Sunday dates for any given year, using Western, Orthodox
or Julian algorithms
.
This package provides the Python 3 version of the datetime module.
Original-Maintainer: Guido Günther <agx@sigxcpu.org>
Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.7-3.1ubuntu1.3
Description: Avahi common data files
Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
It allows programs to publish and discover services and hosts
running on a local network with no specific configuration. For
example you can plug into a network and instantly find printers to
print to, files to look at and people to talk to.
.
This package contains common data files for avahi.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Package: python3-acme
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 278
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-acme
Version: 0.31.0-2+ubuntu18.04.3+certbot+2
Depends: ca-certificates, python3-openssl (>= 0.15), python3-cryptography (>= 1.2.3), python3-josepy (>= 1.1.0~), python3-mock, python3-pkg-resources, python3-requests (>= 2.4.1), python3-requests-toolbelt (>= 0.3.0), python3-rfc3339, python3-six (>= 1.9.0), python3-tz, python3:any (>= 3.3.2-2~)
Suggests: python-acme-doc
Description: ACME protocol library for Python 3
This is a library used by the Let's Encrypt client for the ACME
(Automated Certificate Management Environment). The ACME protocol is
designed as part of the Let's Encrypt project, to make it possible to
setup an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This
library implements the protocol used for proving the control of a
domain. This library is Python 3.
Homepage: https://letsencrypt.org/
Package: node-sha
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2.3-1
Depends: nodejs
Recommends: node-graceful-fs (>= 2)
Description: Check and get file or stream hashes - module for Node.js
node-sha exposes simple functions to check and get file or stream hashes.
The algorithm used defaults to sha1 and can be any of the algorithms
supported by Node.js builtin crypto module.
.
Node.js is an event-based server-side javascript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/ForbesLindesay/sha
Package: ubuntu-standard
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.417
Depends: busybox-static, cpio, cron, dmidecode, dnsutils, dosfstools, ed, file, ftp, hdparm, info, iptables, language-selector-common, libpam-systemd, logrotate, lshw, lsof, ltrace, man-db, mime-support, parted, pciutils, popularity-contest, psmisc, rsync, strace, time, usbutils, wget
Recommends: apparmor, bash-completion, command-not-found, friendly-recovery, iputils-tracepath, irqbalance, manpages, mlocate, mtr-tiny, nano, ntfs-3g, openssh-client, plymouth, plymouth-theme-ubuntu-text, tcpdump, telnet, ufw, update-manager-core, ureadahead, uuid-runtime
Description: The Ubuntu standard system
This package depends on all of the packages in the Ubuntu standard system.
This set of packages provides a comfortable command-line Unix-like
environment.
.
It is also used to help ensure proper upgrades, so it is recommended that
it not be removed.
Package: eject
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1.5+deb1+cvs20081104-13.2
Depends: libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.97)
Suggests: cdtool, setcd
Description: ejects CDs and operates CD-Changers under Linux
This little program will eject CD-ROMs (assuming your drive supports
the CDROMEJECT ioctl). It also allows setting the autoeject feature.
.
On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
the active disc.
.
You can also use eject to properly disconnect external mass-storage
devices like digital cameras or portable music players.
Original-Maintainer: Frank Lichtenheld <djpig@debian.org>
Homepage: http://www.pobox.com/~tranter/eject.html
Package: libcgraph6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.40.1-2
Depends: libc6 (>= 2.14), libcdt5
Conflicts: libgraphviz4
Description: rich set of graph drawing tools - cgraph library
Graphviz is a set of graph drawing tools. See the description of the graphviz
package for a full description.
.
This package contains the cgraph library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://www.graphviz.org/
Package: linux-modules-5.4.0-1086-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69578
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1086.93~18.04.1
Config-Version: 5.4.0-1086.93~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-parsedatetime
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 172
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: parsedatetime
Version: 2.4-3+ubuntu18.04.1+certbot+3
Depends: python3-future, python3:any (>= 3.3.2-2~)
Recommends: python3-icu
Description: Python 3 module to parse human-readable date/time expressions
parsedatetime is able to parse, for example, the following:
.
* August 25th, 2008
* 25 Aug 2008
* Aug 25 5pm
* 5pm August 25
* next saturday
* tomorrow
* next thursday at 4pm
* at 4pm
* eod
* tomorrow eod
* eod tuesday
* eoy
* eom
* in 5 minutes
* 5 minutes from now
* 5 hours before now
* 2 hours before noon
* 2 days from tomorrow
.
This package provides the modules for Python 3.
Homepage: https://pypi.python.org/pypi/parsedatetime/
Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 320
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-2
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
sed reads the specified files or the standard input if no
files are specified, makes editing changes according to a
list of commands, and writes the results to the standard
output.
Original-Maintainer: Clint Adams <clint@debian.org>
Homepage: https://www.gnu.org/software/sed/
Package: linux-modules-5.3.0-1033-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 64655
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.3
Version: 5.3.0-1033.35
Config-Version: 5.3.0-1033.35
Description: Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-certbot
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1206
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 0.31.0-1+ubuntu18.04.1+certbot+1
Replaces: python-letsencrypt
Depends: python3-acme (>= 0.29.0~), python3-ndg-httpsclient, python3-requests (>= 2.4.3), python3-configargparse (>= 0.10.0), python3-configobj, python3-cryptography (>= 1.2.3), python3-josepy, python3-mock, python3-parsedatetime (>= 1.3), python3-pkg-resources, python3-rfc3339, python3-tz, python3-zope.component, python3-zope.interface, python3:any (>= 3.3.2-2~)
Recommends: certbot
Suggests: python-certbot-doc
Breaks: python-certbot-apache (<< 0.20.0), python-certbot-nginx (<< 0.20.0), python-letsencrypt (<= 0.6.0)
Description: main library for certbot
The objective of Certbot, Let's Encrypt, and the ACME (Automated
Certificate Management Environment) protocol is to make it possible
to set up an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This is
accomplished by running a certificate management agent on the web
server.
.
This agent is used to:
.
- Automatically prove to the Let's Encrypt CA that you control the website
- Obtain a browser-trusted certificate and set it up on your web server
- Keep track of when your certificate is going to expire, and renew it
- Help you revoke the certificate if that ever becomes necessary.
.
This package contains the main libraries.
Homepage: https://certbot.eff.org/
Package: linux-modules-5.4.0-1080-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69721
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1080.87~18.04.1
Config-Version: 5.4.0-1080.87~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpython3.6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4648
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.6
Version: 3.6.9-1~18.04ubuntu1.12
Depends: libpython3.6-stdlib (= 3.6.9-1~18.04ubuntu1.12), libc6 (>= 2.25), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 3.6)
Python is a high-level, interactive, object-oriented language. Its 3.6 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the shared runtime library, normally not needed
for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: cloud-init
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2774
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 23.1.2-0ubuntu0~18.04.1
Depends: cloud-guest-utils | cloud-utils, isc-dhcp-client, iproute2, netplan.io | ifupdown, procps, python3, python3-debconf, python3-netifaces, python3-requests, python3-serial, debconf (>= 0.5) | debconf-2.0, python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-oauthlib, python3-yaml, python3:any (>= 3.3.2-2~)
Recommends: eatmydata, gdisk, software-properties-common
Suggests: openssh-server, ssh-import-id
Conffiles:
/etc/NetworkManager/dispatcher.d/hook-network-manager 5fe06610f28360e90a8c04febddd384b
/etc/cloud/clean.d/README 022cf5eee551fc4956f021dac31dc939
/etc/cloud/cloud.cfg 1497c13e66b6053432e6e4f2554d64f6
/etc/cloud/cloud.cfg.d/05_logging.cfg b772a8bc0c407baba78b88e89d8fc743
/etc/cloud/cloud.cfg.d/README f5175bd4df5c37ce781f93d20f59561a
/etc/cloud/templates/chef_client.rb.tmpl a0844ddc9a42776d41a03d62d10ea139
/etc/cloud/templates/chrony.conf.alpine.tmpl 9b5c5b4a39ae11562a5013812c11121d
/etc/cloud/templates/chrony.conf.centos.tmpl 65413a48dedb31d23c93ac417e1a35e8
/etc/cloud/templates/chrony.conf.cos.tmpl 9f97cb21d10890cc268f4382c3f11149
/etc/cloud/templates/chrony.conf.debian.tmpl f6afc8fb02df02a7fad7672a67d34320
/etc/cloud/templates/chrony.conf.fedora.tmpl 8f56d3a782ade6693badf3832775fc82
/etc/cloud/templates/chrony.conf.freebsd.tmpl 8a975ac4cb5ee305bdcb9e0b5f600d90
/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.opensuse.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.photon.tmpl 8f56d3a782ade6693badf3832775fc82
/etc/cloud/templates/chrony.conf.rhel.tmpl 65413a48dedb31d23c93ac417e1a35e8
/etc/cloud/templates/chrony.conf.sle-micro.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.sle_hpc.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.sles.tmpl b7ff0b11f9bded1fc0be5f8806152541
/etc/cloud/templates/chrony.conf.ubuntu.tmpl 1ce60fc8d7ab2a82cdf3e572fb9709ff
/etc/cloud/templates/host.mariner.tmpl 12321ebb370f349597bf08c8b66d870f
/etc/cloud/templates/hosts.alpine.tmpl b376c1ff07007f078ee9580cca61432f
/etc/cloud/templates/hosts.arch.tmpl 8721e41953e3d91348b3bb9a17208c1a
/etc/cloud/templates/hosts.debian.tmpl 941773df489d046d87ae491c3c95d8ec
/etc/cloud/templates/hosts.freebsd.tmpl b93d8b13209900227fd7e1731ae23b0c
/etc/cloud/templates/hosts.gentoo.tmpl de3df962ed420b5fa8ad0b338b8f262b
/etc/cloud/templates/hosts.photon.tmpl 236edf211d757237c91834a5316dd083
/etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
/etc/cloud/templates/hosts.suse.tmpl 7a535f28d538e6bccaaa4dd7b9dd13c8
/etc/cloud/templates/ntp.conf.alpine.tmpl f7a7c7a340e07e36af23248317fb0c09
/etc/cloud/templates/ntp.conf.debian.tmpl 4234ee67d84a3da62e0d97c7329668df
/etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b
/etc/cloud/templates/ntp.conf.freebsd.tmpl b61275698a566f98fa4610a17a8f3c60
/etc/cloud/templates/ntp.conf.opensuse.tmpl e4bb5100b2dc442b6237ac7e1635acaa
/etc/cloud/templates/ntp.conf.photon.tmpl 86295b29892a099d2b0a87461e81cf31
/etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8
/etc/cloud/templates/ntp.conf.sles.tmpl e4bb5100b2dc442b6237ac7e1635acaa
/etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d
/etc/cloud/templates/ntpd.conf.openbsd.tmpl 82dfebda546e4e023b0eec0993a58012
/etc/cloud/templates/resolv.conf.tmpl a32413c9f622d5dfa784ef43e3e9e2be
/etc/cloud/templates/sources.list.debian.tmpl a7e69f77a32f15648cee0423fd1ed2bd
/etc/cloud/templates/sources.list.ubuntu.tmpl b9f68f7e572d59a2af0c9758bc2ed1f2
/etc/cloud/templates/systemd.resolved.conf.tmpl a454bfaea86f3758d0078819985d711c
/etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198
/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f
/etc/profile.d/Z99-cloud-locale-test.sh d21d24035fbd71d94b167aebc2385be3
/etc/profile.d/Z99-cloudinit-warnings.sh 0c6c968d0de8a9141d8ae0a87c5f0293
/etc/rsyslog.d/21-cloudinit.conf d4cf2e5d3cb9914cf7e6cdc08d298339
/etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf e7c2c31c4ceae9e9a4a5c4ef1c165727
/etc/bash_completion.d/cloud-init d71fb45de8c6821b825db78591e452a7 obsolete
Description: Init scripts for cloud instances
Cloud instances need special scripts to run during initialisation
to retrieve and install ssh keys and to let the user run various scripts.
Package: libcups2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.2.7-1ubuntu2.10
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.17), libgnutls30 (>= 3.5.6), libgssapi-krb5-2 (>= 1.14+dfsg), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Breaks: cups (<< 1.5.0)
Description: Common UNIX Printing System(tm) - Core library
The Common UNIX Printing System (or CUPS(tm)) is a printing system and
general replacement for lpd and the like. It supports the Internet
Printing Protocol (IPP), and has its own filtering driver model for
handling various document types.
.
This package provides the base shared libraries for CUPS.
Homepage: https://www.cups.org/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 287
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.7
Depends: libc6 (>= 2.25)
Description: smart column output alignment library
This smart column output alignment library is used by fdisk utilities.
Original-Maintainer: LaMont Jones <lamont@debian.org>
Package: linux-image-5.4.0-1064-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 10307
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed-aws-5.4
Version: 5.4.0-1064.67~18.04.1
Config-Version: 5.4.0-1064.67~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1064-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1064-aws
Conflicts: linux-image-unsigned-5.4.0-1064-aws
Description: Signed kernel image aws
A kernel image for aws. This version of it is signed with
Canonical's UEFI/Opal signing key.
Built-Using: linux-aws-5.4 (= 5.4.0-1064.67~18.04.1)
Package: linux-image-5.4.0-1056-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9307
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1056.59~18.04.1
Config-Version: 5.4.0-1056.59~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1056-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1056-aws
Conflicts: linux-image-unsigned-5.4.0-1056-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: popularity-contest
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.66ubuntu1
Provides: popcon
Depends: debconf (>= 0.5) | debconf-2.0, dpkg (>= 1.10)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Recommends: cron | cron-daemon
Suggests: anacron
Conffiles:
/etc/cron.daily/popularity-contest 8312956049ad042cd0c299116cb1c43f
Description: Vote for your favourite packages automatically
The popularity-contest package sets up a cron job that will
periodically anonymously submit to the Ubuntu developers
statistics about the most used Ubuntu packages on this system.
.
This information helps Ubuntu make decisions such as which packages
should go on the first CD. It also lets Ubuntu improve future versions
of the distribution so that the most popular packages are the ones which
are installed automatically for new users.
Homepage: https://popcon.debian.org/
Original-Maintainer: Popularity Contest Developers <debian-popcon@lists.debian.org>
Package: linux-modules-5.4.0-1059-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 69555
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1059.62~18.04.1
Config-Version: 5.4.0-1059.62~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-2ubuntu0.1
Depends: libaprutil1 (= 1.6.1-2ubuntu0.1), libc6 (>= 2.4), libldap-2.4-2 (>= 2.4.7)
Description: Apache Portable Runtime Utility Library - LDAP Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the LDAP driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Package: linux-modules-5.4.0-1025-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 65567
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1025.25~18.04.1
Config-Version: 5.4.0-1025.25~18.04.1
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
Contains the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.8.1-6ubuntu1.18.04.1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.14)
Description: system interface for user-level packet capture
libpcap (Packet CAPture) provides a portable framework for low-level
network monitoring. Applications include network statistics collection,
security monitoring, network debugging, etc.
.
Since almost every system vendor provides a different interface for
packet capture, and since there are several tools that require this
functionality, the libpcap authors created this system-independent API
to ease in porting and to alleviate the need for several
system-dependent packet capture modules in each application.
Homepage: http://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>
Package: linux-aws-5.4-headers-5.4.0-1086
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 71102
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux-aws-5.4
Version: 5.4.0-1086.93~18.04.1
Depends: coreutils
Breaks: iscsitarget-dkms (<< 1.4.20.3+svn502-2ubuntu4.4)
Description: Header files related to Linux kernel version 5.4.0
This package provides kernel header files for version 5.4.0, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-aws-5.4-headers-5.4.0-1086/debian.README.gz for details
Package: node-fs.realpath
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.0-1
Depends: nodejs
Description: Use node's fs.realpath
Use node's fs.realpath, but fall back to the JS implementation if the native
one fails
.
Node.js is an event-based server-side JavaScript engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/isaacs/fs.realpath#readme
Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
/etc/protocols bb9c019d6524e913fd72441d58b68216
/etc/rpc f0b6f6352bf886623adc04183120f83b
/etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
This package provides the necessary infrastructure for basic TCP/IP based
networking.
Original-Maintainer: Marco d'Itri <md@linux.it>
Package: xdelta3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.11-dfsg-1ubuntu1
Depends: libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614)
Description: Diff utility which works with binary files
Xdelta3 is a set of tools designed to compute changes between
binary files. These changes (delta files) are similar to the output of the
"diff" program, in that they may be used to store and transmit only the
changes between files. The "delta files" that Xdelta3 manages are
stored in RFC3284 (VCDIFF) format.
Original-Maintainer: A Mennucc1 <mennucc1@debian.org>
Package: libwebp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2ubuntu0.18.04.2
Depends: libc6 (>= 2.14)
Description: Lossy compression of digital photographic images.
Image Compression format, based on the VP8 codec.
WebP uses the modern VP8 compression format to deliver efficient
compression of images for the web. More than 30% extra gain over
optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-0ubuntu2.2
Provides: libz-dev
Depends: zlib1g (= 1:1.2.11.dfsg-0ubuntu2.2), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes the development support
files.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>
Package: libuv1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libuv1
Version: 1.18.0-3
Replaces: libuv-dev
Depends: libuv1 (= 1.18.0-3)
Conflicts: libuv-dev, libuv0.10-dev
Description: asynchronous event notification library - development files
Libuv is the asynchronous library behind Node.js. Very similar to libevent or
libev, it provides the main elements for event driven systems: watching and
waiting for availability in a set of sockets, and some other events like timers
or asynchronous messages. However, libuv also comes with some other extras
like:
* files watchers and asynchronous operations
* a portable TCP and UDP API, as well as asynchronous DNS resolution
* processes and threads management, and a portable inter-process
communications mechanism, with pipes and work queues
* a plugins mechanism for loading libraries dynamically
* interface with external libraries that also need to access the I/O.
.
Install this package if you wish to develop your own programs using the
libuv engine.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/libuv/libuv
Package: php-symfony-process
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: symfony
Version: 3.4.6+dfsg-1ubuntu0.1
Depends: php-common
Description: execute commands in sub-processes
The Symfony Process Component helps with executing commands in
sub-processes by providing easy access to standard and error output
in real-time. It is especially handy for dealing with long running
sub-processes due to its feature to run them asynchronously, while
still providing access to their full and incremental output. It
additionally supports signals, provides the PID of a sub-process
and allows the definition of process timeouts.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/3.4/components/process.html
Original-Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Package: libfile-stripnondeterminism-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: strip-nondeterminism
Version: 0.040-1.1~build1
Depends: libarchive-zip-perl, perl
Recommends: libarchive-cpio-perl
Description: file non-deterministic information stripper — Perl module
StripNondeterminism is a library for stripping non-deterministic information
such as timestamps and filesystem ordering from various file and archive
formats.
.
This can be used as a post-processing step to improve the reproducibility of a
build product, when the build process itself cannot be made deterministic.
.
It is used as part of the Reproducible Builds project, although it should be
considered a temporary workaround which should not be needed in the long
term; upstream software should be reproducible even without using such a tool.
.
This package installs the Perl module ‘File::StripNondeterminism’.
Original-Maintainer: Reproducible builds folks <reproducible-builds@lists.alioth.debian.org>
Homepage: https://reproducible-builds.org/
Package: libxml-sax-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.99+dfsg-2ubuntu1
Depends: perl, libxml-namespacesupport-perl, libxml-sax-base-perl, ucf (>= 0.28)
Recommends: libxml-sax-expat-perl
Description: Perl module for using and building Perl SAX2 XML processors
XML::SAX consists of several framework classes for using and
building Perl SAX2 XML parsers, filters, and drivers. It is designed
around the need to be able to "plug in" different SAX parsers to an
application without requiring programmer intervention. Those of you
familiar with the DBI will be right at home. Some of the designs
come from the Java JAXP specification (SAX part), only without the
javaness.
.
The package also contains a SAX parser, XML::SAX::PurePerl, but it
is considered too slow for serious use and is only provided as a
fallback parser. It is recommend XML::SAX::Expat (provided in
libxml-sax-expat-perl) instead.
.
The framework includes a Debian-specific script (called
update-perl-sax-parsers) to manage the ParserDetails.ini file. This
script is intended to be used in postinst and prerm package scripts to
(de)register parsers. See README.Debian for more info.
Homepage: http://search.cpan.org/dist/XML-SAX/
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Package: pkg-kde-tools
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 442
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.15.28ubuntu1
Depends: libdpkg-perl (>= 1.19.0~), lintian, python3:any (>= 3.3.2-2~), perl
Recommends: dpkg-dev (>= 1.15.6~), libwww-perl
Suggests: cdbs, debhelper (>= 7.3.16)
Breaks: dpkg-dev (<< 1.15.6~), kdelibs5-dev (<< 4:4.2.2)
Description: various packaging tools and scripts for KDE Applications
This package contains a variety of packaging tools and build scripts that may
be very useful when packaging KDE applications. Even if you are a maintainer
of a very small KDE application, this package should be worthwhile checking
out.
.
Main highlights:
- recommended build flags for building packages based on the KDE Platform;
- cdbs class for building packages based on the KDE Platform (kde.mk);
- debhelper build system (--buildsystem=kde) and dh addon (--with kde) for
building packages based on the KDE Platform;
- dh_sameversiondep for generating a dependency that is versioned the same
way as a dependency (coming from the same source) of another reference
package.
- dh_movelibkdeinit for moving libkdeinit4_*.so libraries to private
location;
- dh_sodeps (and sodeps dh addon) for generating so:Depends substvar for -dev
packages based to which local packages lib*.so symlinks point to;
- dh_qmlcdeps (and qmlcdeps dh addon) for generating qmlc:Depends substvar
for packages shipping QML cache files.
- pkgkde-symbolshelper tool for efficient management of C and C++ symbol
files;
- pkgkde-debs2symbols tool for generating symbol files and symbol file
patches from pre-built binaries in the deb packages;
- pkgkde-getbuildlogs tool for downloading build logs for the specified
package (from buildd.debian.org);
- pkgkde-override-sc-dev-latest tool for overriding Breaks of the
kde-sc-dev-latest package;
- pkgkde-vcs tool for performing common tasks when packaging under VCS.
.
NOTE: since this package is cumulative, it does not depend on the packages it
provides helpers for. I.e. you still need to explicitly build depend on
debhelper or cdbs in your packages.
Original-Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
Package: libjpeg8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu8
Depends: libjpeg-turbo8 (>= 1.1.90+svn722-1ubuntu6)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
libjpeg8 dependency package, depending on libjpeg-turbo8.
Package: libisl19
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1736
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.19-1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
isl is a library for manipulating sets and relations of integer points
bounded by linear constraints. Supported operations on sets include
intersection, union, set difference, emptiness check, convex hull,
(integer) affine hull, integer projection, and computing the lexicographic
minimum using parametric integer programming. It also includes an ILP solver
based on generalized basis reduction.
.
This package contains the runtime library.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: http://isl.gforge.inria.fr/
Package: adwaita-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.28.0-1ubuntu1
Replaces: adwaita-icon-theme-full (<< 3.28.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Depends: hicolor-icon-theme, gtk-update-icon-cache, librsvg2-common, ubuntu-mono | adwaita-icon-theme-full
Breaks: adwaita-icon-theme-full (<< 3.28.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Description: default icon theme of GNOME (small subset)
This package contains the default icon theme used by the GNOME desktop.
The icons are used in many of the official gnome applications like eog,
evince, system monitor, and many more.
.
This package only contains a small subset of the original GNOME icons which
are not provided by the Humanity icon theme, to avoid installing many
duplicated icons. Please install adwaita-icon-theme-full if you want the full
set.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11714
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: binutils
Version: 2.30-21ubuntu1~18.04.9
Replaces: binutils (<< 2.29-6)
Depends: binutils-common (= 2.30-21ubuntu1~18.04.9), libbinutils (= 2.30-21ubuntu1~18.04.9), libc6 (>= 2.27), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.30-21ubuntu1~18.04.9)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities, for x86-64-linux-gnu target
This package provides GNU assembler, linker and binary utilities
for the x86-64-linux-gnu target.
.
You don't need this package unless you plan to cross-compile programs
for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>
Package: software-properties-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 196
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.96.24.32.14
Replaces: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Depends: python3:any (>= 3.3.2-2~), python3, python3-gi, gir1.2-glib-2.0, python-apt-common (>= 0.9), python3-dbus, python3-software-properties (= 0.96.24.32.14), ca-certificates
Breaks: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Conffiles:
/etc/dbus-1/system.d/com.ubuntu.SoftwareProperties.conf cc3c01a5b5e8e05d40c9c075f44c43ea
Description: manage the repositories that you install software from (common)
This software provides an abstraction of the used apt repositories.
It allows you to easily manage your distribution and independent software
vendor software sources.
.
This package contains the common files for software-properties like the
D-Bus backend.
Package: linux-image-5.4.0-1041-aws
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 9217
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-aws-5.4
Version: 5.4.0-1041.43~18.04.1
Config-Version: 5.4.0-1041.43~18.04.1
Provides: aufs-dkms, fuse-module, linux-image, spl-dkms, spl-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-1041-aws
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-aws-5.4-doc-5.4.0 | linux-aws-5.4-source-5.4.0, linux-aws-5.4-tools, linux-headers-5.4.0-1041-aws
Conflicts: linux-image-unsigned-5.4.0-1041-aws
Description: Linux kernel image for version 5.4.0 on 64 bit x86 SMP
This package contains the Linux kernel image for version 5.4.0 on
64 bit x86 SMP.
.
Supports AWS processors.
.
Geared toward Amazon Web Services (AWS) systems.
.
You likely do not want to install this package directly. Instead, install
the linux-aws meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pygments
Version: 2.2.0+dfsg-1ubuntu0.2
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: ttf-bitstream-vera
Description: syntax highlighting package written in Python 3
Pygments aims to be a generic syntax highlighter for general use in all kinds
of software such as forum systems, wikis or other applications that need to
prettify source code.
.
Highlights are:
* a wide range of common languages and markup formats is supported
* special attention is paid to details, increasing quality by a fair amount
* support for new languages and formats are added easily
* a number of output formats, presently HTML, LaTeX and ANSI sequences
* it is usable as a command-line tool and as a library
Homepage: http://pygments.org/
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
|