0xV3NOMx
Linux ip-172-26-7-228 5.4.0-1103-aws #111~18.04.1-Ubuntu SMP Tue May 23 20:04:10 UTC 2023 x86_64



Your IP : 3.145.64.210


Current Path : /proc/self/root/usr/bin/
Upload File :
Current File : //proc/self/root/usr/bin/bundledoc

#! /usr/bin/env perl

##########################################################
# Bundle all the files needed to build a LaTeX document. #
# By Scott Pakin <scott+bdoc@pakin.org>                  #
##########################################################

########################################################################
# bundledoc                                                            #
# Copyright (C) 2014 Scott Pakin                                       #
#                                                                      #
# This program may be distributed and/or modified under the conditions #
# of the LaTeX Project Public License, either version 1.3c of this     #
# license or (at your option) any later version.                       #
#                                                                      #
# The latest version of this license is in:                            #
#                                                                      #
#    http://www.latex-project.org/lppl.txt                             #
#                                                                      #
# and version 1.3c or later is part of all distributions of LaTeX      #
# version 2008/05/04 or later.                                         #
#                                                                      #
# This program consists of the file bundledoc and all the files listed #
# in the Files section of the associated README file.                  #
########################################################################

use 5.006;             # Fail gracefully if we're not using Perl v5.6.0.
our $VERSION = "3.2";  # Specify the version of bundledoc.
use File::Basename;
use File::Copy;
use File::Spec::Functions qw(abs2rel catfile devnull rel2abs rootdir updir);
use File::Path;
use Getopt::Long;
use Pod::Usage;
use POSIX;
use warnings;
use strict;

######################################################################

# Variables the user can override with a configuration file
# DEFAULTS: Linux + kpathsea
my %uservariable;
$uservariable{"bundle"} = '(tar -cvf - $BDINPUTS | gzip --best > $BDBASE.tar.gz)';
$uservariable{"find"}   = 'kpsewhich -progname=latex $BDINPUTS';
$uservariable{"sink"}   = '> ' . devnull() . ' 2>&1';

# OS path separator (Is there a better way to get this?)
my $pathsep = catfile ("", "");

# File that lists original directory names
my $manifest = "MANIFEST";

# Cleaned-up name of this Perl script
my $progname = basename($0);

# Other global variables
my ($verbose, $keepdirs, $depfile, $localonly);  # Taken from the command line
my (@exclude_files, @include_files, @listdeps);  # Taken from the command line
my ($texfile, $docdirname);               # Derived from $depfile
my %subdirs;                              # Map from a qualified name to its subdirectory

######################################################################

# Find a file in the LaTeX hierarchy and fully qualify it,
# or abort if we can't.
sub qualifyname ($)
{
    my $filename = $_[0];
    $filename = "\"$filename\"" if $filename =~ /\s/ && substr($filename, 0, 1) ne '"';
    my $command = $uservariable{find};
    $command =~ s/[\$\%]BDINPUTS\%?/$filename/g;
    $command =~ s/[\$\%]BDBASE\%?/$ENV{"BDBASE"}/g;
    my $qualified = `$command` ||
        die "${progname}: \"$uservariable{find}\" (BDINPUTS=\"$_[0]\") failed to find $_[0]\n";
    chomp $qualified;
    $qualified = rel2abs $qualified;
    return $qualified;
}

# Execute a command, and return an error message if it fails.
sub executecmd ($)
{
    my $command = ($verbose ? $_[0] : "$_[0] $uservariable{sink}");
    $command =~ s/[\$\%]BDINPUTS\%?/$ENV{"BDINPUTS"}/g;
    $command =~ s/[\$\%]BDBASE\%?/$ENV{"BDBASE"}/g;
    my $retval;

    if ($verbose) {
        print "EXECUTING: $command\n";
        print "           (BDINPUTS = $ENV{BDINPUTS})\n";
    }
    if ($pathsep eq "\\") {
        # Dirty trick to work around idiotic "\" --> "/" conversion
        $retval = system qq("$command");
    }
    else {
        $retval = system $command;
    }
    die "${progname}: $!.  Failing command was:\n\t$command\n" if $retval;
}

# Read a configuration file, and set %uservariable accordingly.
sub process_config_file ($)
{
    my $configfile = $_[0];
    my $prevline = "";
    open (CONFIGFILE, "<$configfile") || die "${progname}: $! ($configfile)\n";
    while (my $oneline=<CONFIGFILE>) {
        # Read a line and trim it.
        chomp $oneline;
        $oneline =~ s/^\s+//;
        $oneline =~ s/\s+$//;

        # Determine if we should process the line now, later, or never.
        next if $oneline =~ /^\#.*$/;      # Discard comments.
        if ($oneline =~ m|^(.*)\\$|) {     # Handle line continuations.
            $prevline .= $1;
            next;
        }
        $oneline = $prevline . $oneline;
        $prevline = "";
        next if $oneline =~ /^\s*$/;       # Discard blank lines.

        # Parse the line.
        $oneline =~ /^(\w+)\s*:\s*(.*)$/;
        $uservariable{lc($1)} = $2;
    }
    close CONFIGFILE;
}

# Find all dependencies listed in the input file.
sub find_dependencies ()
{
    open (DEPFILE, "<$depfile") || die "${progname}: $! ($depfile)\n";
    my $braced = "{([^\}]*)}";   # Regular expression for a braced name
    my @dependencies;            # List of fully-qualified filenames
    @dependencies = qualifyname $texfile;
    while (my $oneline=<DEPFILE>) {
        # Parse an input line into its component fields.
        next if !($oneline =~ /^\s*\*$braced\s*$braced\s*$braced\s*$/);
        my $filetype = $1;
        my $filename = $2;
        my $versioninfo = $3;

        # Extract the subdirectory if one exists.
        my $subdir = dirname $filename;
        my $qname = "";

        # Determine what to do based on the file type.
        # NOTE: The PROCESSDEP block currently ignores the following
        # file types:
        #
        #    * application
        #    * tfm
        #    * format
      PROCESSDEP:
        {
            $filetype eq "package" && do {
                $qname = qualifyname("$filename.sty");
                last PROCESSDEP;
            };
            $filetype eq "class" && do {
                $qname = qualifyname("$filename.cls");
                last PROCESSDEP;
            };
            $filetype eq "file" && do {
                $qname = qualifyname("$filename");
                last PROCESSDEP;
            };
        }

        # If the file is of one of the above types, add the qualified
        # name to the list of dependencies.  In addition, if it is in
        # a proper subdirectory, add an entry to the subdirs hash.
        unless ($qname eq "") {
            push @dependencies, $qname;
            $subdirs{$qname} = $subdir unless $subdir eq ".";
        }
    }
    close DEPFILE;
    @dependencies = sort @dependencies;

    # If --localonly was specified, discard dependencies that are not
    # in the same directory as the .tex file (or a subdirectory
    # thereof).
    if ($localonly) {
        my @newdeps;
        my $texdir = dirname qualifyname $texfile;
        my $lentexdir = length $texdir;
        my $numdeleted = 0;
        foreach my $dep (@dependencies) {
            if (substr($dep, 0, $lentexdir) ne $texdir) {
                $numdeleted++;
            }
            else {
                push @newdeps, $dep;
            }
        }
        @dependencies = @newdeps;
        print "OMITTING $numdeleted non-local file(s)\n" if $verbose;
    }

    # If --exclude was specified, discard all dependencies containing
    # excluded text as a substring.
    my $numexcluded = 0;
    foreach my $excluded (@exclude_files) {
        my @newdeps;
        foreach my $dep (@dependencies) {
            if ($dep =~ /\Q$excluded\E/) {
                $numexcluded++;
            }
            else {
                push @newdeps, $dep;
            }
        }
        @dependencies = @newdeps;
    }
    print "OMITTING $numexcluded excluded file(s)\n" if $verbose && $numexcluded;

    # If --include was specified, include the corresponding files.
    my $numextras = 0;
    foreach my $include_glob (@include_files) {
        foreach my $include_file (glob $include_glob) {
            push @dependencies, $include_file;
            $numextras++;
        }
    }
    print "INCLUDING $numextras additional file(s)\n" if $verbose && $numextras;

    # Remove duplicates.
    my %uniquedeps;
    foreach my $dep (@dependencies) {
        $uniquedeps{$dep} = 1;
    }
    my $numdups = @dependencies - keys %uniquedeps;
    print "REMOVING $numdups duplicate file(s)\n" if $verbose && $numdups;
    @dependencies = sort keys %uniquedeps;

    # If --listdeps was specified, output the list of dependencies.
    if (@listdeps) {
        @dependencies = map {abs2rel($_)} @dependencies if grep /^rel$/, @listdeps;
        print join("\n", @dependencies), "\n";
        exit 0 if grep /^only$/, @listdeps;
    }

    # Return the list of dependencies.
    return @dependencies;
}

######################################################################

# Parse and process the command-line options.
my $showhelp = "";
$keepdirs = 0;
$verbose = 0;
$localonly = 0;
GetOptions ('texfile=s' => \$texfile,
            'directory=s' => \$docdirname,
            'manifest:s' => \$manifest,
            'keepdirs!' => \$keepdirs,
            'localonly!' => \$localonly,
            'exclude=s' => \@exclude_files,
            'include=s' => \@include_files,
            'config=s' => sub { process_config_file($_[1]) },
            'verbose!' => \$verbose,
            'listdeps=s' => \@listdeps,
            'version' => sub { print "bundledoc $VERSION\n"; exit -1 },
            'help' => \$showhelp) || pod2usage (-exitval => 1, -verbose => 0);
pod2usage (-exitval => 0,
           -verbose => 1) if $showhelp && $verbose;
pod2usage (-message => "(For more detailed help, enter \"$0 --help --verbose\".)",
           -exitval => 0,
           -verbose => 0) if $showhelp;
pod2usage (-message => "${progname}: Too few arguments",
           -exitval => 1,
           -verbose => 0) if $#ARGV==-1;
$depfile = shift;                # Dependencies from snapshot.sty
($texfile = $depfile) =~ s/\.[^.]*$/.tex/ if !$texfile;   # Main LaTeX source file
($docdirname = basename($depfile)) =~ s/\.[^.]*$// if !$docdirname;     # Name to use for the document directory
($ENV{"BDBASE"} = rel2abs($depfile)) =~ s/\.[^.]*$//;   # May be needed by user-defined variables
print "BDBASE = '$ENV{BDBASE}'\n" if $verbose;
$ENV{"BDBASE"} = "\"$ENV{BDBASE}\"";

# Expand and sanity check @listdeps.
@listdeps = map {s/\s+//g; split /,/} @listdeps;
foreach my $ldep (@listdeps) {
    if ($ldep !~ /^(rel|only|yes|no)$/) {
        pod2usage (-message => "${progname}: Invalid --listdeps option \"$ldep\"",
                   -exitval => 1,
                   -verbose => 0);
    }
}
@listdeps = () if grep /^no$/, @listdeps;

# Create a bundled file.
my @dependencies = find_dependencies();
if ($keepdirs) {
    # Put absolute pathnames in the tar file.
    # QUESTIONS: Does this work with multiple drive letters in Windows?
    #            What about UNC names?
    chdir rootdir() || die "${progname}: $! (".rootdir().")\n";
    $ENV{"BDINPUTS"} = join (" ", map {s|^/+||; s/\"//g; "\"$_\""} @dependencies);
    executecmd $uservariable{"bundle"};
}
else {
    # Copy each of the dependencies to a temporary directory and tar it up.
    my $tempdir = tmpnam();
    my $tempdir2 = catfile $tempdir, $docdirname;
    print "CREATING $tempdir\n" if $verbose;
    mkdir ($tempdir, 0777)  || die "${progname}: $! ($tempdir)\n";
    print "CREATING $tempdir2\n" if $verbose;
    mkdir ($tempdir2, 0777) || die "${progname}: $! ($tempdir2)\n";
    foreach my $dep (@dependencies) {
        # If the current dependency is in a subdirectory of the
        # original location, create the same subdirectory in the
        # temporary directory and copy the file there.  Otherwise just
        # copy it to the root of the temporary directory.
        my $targetdir = $tempdir2;
        if (my $sd = $subdirs{$dep}) {
            $targetdir = catfile($targetdir, $sd);
            unless (-d $targetdir) {
                print "CREATING $targetdir\n" if $verbose;
                mkpath($targetdir, 0, 0777) || die "${progname}: $! ($targetdir)\n";
            }
        }
        copy ($dep, $targetdir) || die "${progname}: $! ($targetdir)\n";
    }
    if ($manifest ne "") {
        my $manifest = catfile $tempdir2, $manifest;
        my $manifestdir = dirname $manifest;
        unless (-d $manifestdir) {
            print "CREATING $manifestdir\n" if $verbose;
            mkpath($manifestdir, 0, 0777) || die "${progname}: $! ($manifestdir)\n";
        }
        print "WRITING $manifest\n" if $verbose;
        open (MANIFEST, ">$manifest") || die "${progname}: $! ($manifest)\n";
        print MANIFEST join ("\n", @dependencies), "\n";
        close MANIFEST;
    }
    chdir $tempdir || die "${progname}: $! ($tempdir)\n";
    $ENV{"BDINPUTS"} = "\"$docdirname\"";
    executecmd $uservariable{"bundle"};

    # Clean up our mess.
    # NOTE: We rmtree $tempdir2 and rmdir $tempdir because rmtree
    #       complained on WinNT when trying to remove a top-level
    #       directory (e.g., "\s4r.").
    print "REMOVING $tempdir2\n" if $verbose;
    rmtree $tempdir2, 0, 1;
    chdir (updir());
    print "REMOVING $tempdir\n" if $verbose;
    rmdir $tempdir || die "${progname}: $! ($tempdir)\n";
}
print "FINISHED.\n" if $verbose;
exit 0;

__END__

######################################################################

=head1 NAME

bundledoc - bundle all the files needed by a LaTeX document


=head1 SYNOPSIS

bundledoc
[B<--version>]
[B<--help>]
[B<-->[B<no>]B<verbose>]
[B<--texfile>=I<file>]
[B<--directory>=I<directory>]
[B<-->[B<no>]B<localonly>]
[B<--exclude>=I<string>]
[B<--include>=I<filespec>]
[B<--manifest>=I<file>]
[B<-->B<listdeps>=[yes|no|only|rel]...]
[B<-->[B<no>]B<keepdirs>]
[B<--config>=I<file>]
I<.dep file>


=head1 DESCRIPTION

B<bundledoc> is a post-processor for the B<snapshot> package that
bundles together all the classes, packages, and files needed to build
a given LaTeX document.  It reads the F<.dep> file that B<snapshot>
produces, finds each of the files mentioned therein, and packages them
into a single archive file (e.g., a F<.tar.gz> file), suitable for
moving across systems, transmitting to a colleague, etc.

As the simplest example possible, consider a LaTeX file called, say,
F<hello.tex>:

    \RequirePackage{snapshot}       % Needed by bundledoc
    \documentclass[11pt]{article}

    \begin{document}
    Hello, world!
    \end{document}

The C<\RequirePackage{snapshot}> causes a F<hello.dep> file to be produced.
When B<bundledoc> is then given C<hello.dep> as an argument, it locates the
dependent files -- F<snapshot.sty>, F<article.cls>, and F<size11.clo> --
and bundles them into a single archive file, along with F<hello.tex> and a
F<MANIFEST> file (described in L<"OPTIONS">, below).


=head1 OPTIONS

In the following descriptions, I<somefile> refers to the name of your
main LaTeX document (no extension).

B<bundledoc> requires the name of the dependency file produced by
B<snapshot> (normally I<somefile>F<.dep>).  The following options may
also be given:

=over 4

=item B<--version>

Output the B<bundledoc> script's version number.  This overrides all
of the remaining options.

=item B<--help>

Give a brief usage message.  This overrides all of the remaining options.

=item B<-->[B<no>]B<verbose>                    (default: C<noverbose>)

B<bundledoc> normally does not output anything except error messages.
With C<--verbose>, it outputs copious status messages.

=item B<--texfile>=I<main .tex file>            (default: I<somefile>F<.tex>)

B<snapshot>'s dependency file does not list the main LaTeX file (the
one that gets passed to B<latex>).  In order for B<bundledoc> to find
and bundle that file, B<bundledoc> assumes it has the same name as the
B<snapshot> dependency file but with a F<.tex> extension.  If this is
not the case, then use C<--texfile> to specify the correct filename.

=item B<--directory>=I<archive directory>       (default: I<somefile>)

When B<bundledoc> creates an archive (e.g., a F<.tar> or F<.zip> file)
containing the document's files, it puts all of them in a directory to
avoid cluttering the current directory with files.  If the given
dependency file is called I<somefile>F<.dep> then the resulting
archive will, by default, store all the dependent files in a
I<somefile> directory.  To change the directory name use the
C<--directory> option.

=item B<-->[B<no>]B<localonly>                  (default: C<nolocalonly>)

Although B<bundledoc> normally archives all of the files named in the
F<.dep> file, the C<--localonly> option tells B<bundledoc> to exclude
all files located in a directory other than the F<.tex> file's
directory or one of its subdirectories.

=item B<--exclude>=I<string>                    (default: I<none>)

While C<--localonly> causes files outside of the F<.tex> file's
directory tree to be omitted from the archive, C<--exclude> provides
finer-grained control over files to omit from the archive.  The
C<--exclude> option, which can be specified repeatedly on the command
line, causes all files whose name contains I<string> to be omitted
from the archive.

=item B<--include>=I<filespec>                  (default: I<none>)

The C<--include> option, which can be specified repeatedly on the
command line, instructs B<bundledoc> to include in the archive all of
the files matching I<filespec>, even if they're not referenced in the
F<.dep> file.

=item B<--manifest>=I<manifest file>            (default: F<MANIFEST>)

In addition to the dependent files, B<bundledoc> includes in the
archive file one extra file called, by default, ``F<MANIFEST>''.
F<MANIFEST> is a text file that lists the original filenames of all
the dependencies.  To change the filename from ``F<MANIFEST>'' to
something else, use the C<--manifest> option.  As a special case,
C<--manifest=""> tells B<bundledoc> not to include a manifest file at
all.

=item B<--listdeps>=[yes|no|only|rel]...]       (default: C<no>)

C<--listdeps> accepts one or more of C<yes>, C<no>, C<only>, or C<rel>
as a comma-separated list.  As long as C<no> does not appear in this
list, B<bundledoc> outputs all of the main LaTeX file's dependencies.
If the list contains C<rel>, then B<bundledoc> outputs the list of
dependencies with relative pathnames.  If the list contains C<only>,
then B<bundledoc> exits after displaying the list, without producing
an archive.

=item B<-->[B<no>]B<keepdirs>                   (default: C<nokeepdirs>)

Normally, the archive file that B<bundledoc> produces contains a
single directory -- and subdirectories, if the document refers
explicitly to them -- in which all the dependent files lie.  If
C<--keepdirs> is specified, all the dependent files are stored with
their original pathnames.  For example, if F<somefile.tex> depends on
F<figures/somefigure.eps>, F<article.cls>, and F<snapshot.sty>, then
the I<somefile> archive will normally contain the following files:

=over 4

=item *

F<somefile/somefile.tex>

=item *

F<somefile/figures/somefigure.eps>

=item *

F<somefile/article.cls>

=item *

F<somefile/snapshot.sty>

=item *

F<somefile/MANIFEST>

=back

However, C<--keepdirs> will cause the I<somefile> archive to contain
the following sorts of filenames instead:

=over 4

=item *

F<home/me/mydocs/somefile.tex>

=item *

F<home/me/mydocs/figures/somefigure.eps>

=item *

F<usr/share/texmf/tex/latex/base/article.cls>

=item *

F<usr/share/texmf/tex/latex/snapshot/snapshot.sty>

=back

C<--directory> is not used when C<--keepdirs> is in effect.  In
addition, no manifest file is written to the archive file as it
contains redundant information.

=item B<--config>=I<configuration file>         (default: E<lt>noneE<gt>)

The C<--config> option is used to point B<bundledoc> to the
appropriate configuration (F<.cfg>) file for your TeX distribution and
operating system.  B<bundledoc> comes with a few configuration files
and it's easy to write more.  See L<"CONFIGURATION FILES"> (below) for
a description of the configuration file format.

=back


=head1 CONFIGURATION FILES

=head2 Format

Configuration files follow a fairly simple format.  Lines beginning with
C<#> are comments.  Blank lines are ignored.  All other lines are of the
form:

    variable: value

The current version of B<bundledoc> recognizes the following variables:

=over 4

=item B<bundle>

The command to use to bundle a set of files into a single archive file

=item B<sink>

The affix to a command to discard its output

=item B<find>

The command to find a file within the TeX tree(s).

=back

Values that are too long for one line can be split across multiple lines
by using C<\> as the line-continuation symbol.

There are two environment variables that B<bundledoc> makes available
for use by configuration-file commands: C<BDBASE>, which is set to
I<somefile> (as in L<"OPTIONS">), and C<BDINPUTS>, which is set to a
space-separated list of files that a command is to operate upon.  That
is, when the command associated with C<bundle> is running, C<BDINPUTS>
contains the list of all the files that are to be archived.  In
contrast, when the command associated with C<find> is running,
C<BDINPUTS> contains the name of the file to search for.

=head2 Examples

The following configuration file parallels B<bundledoc>'s default
values of the various configuration-file variables, which represents a
kpathsea-based TeX distribution running on a generic Unix system,
which doesn't necessarily have any of the GNU tools, such as B<gzip>
or GNU B<tar>:

    # "Default" configuration file
    # By Scott Pakin <scott+bdoc@pakin.org>

    bundle: (tar -cvf - $BDINPUTS | compress > $BDBASE.tar.Z)
    sink:   > /dev/null 2>&1
    find:   kpsewhich -progname=latex $BDINPUTS

The parentheses in the C<bundle:> line tell the Unix shell to run the
command in a subshell.  This is to make the C<sink:> affix work
properly (i.e., so there aren't two C<E<gt>>'s in the same command).

Notice how the commands treat C<BDBASE> and C<BDINPUTS> like any other
environment variables in a Unix shell, using C<$> to take their value.
Other operating systems use different conventions for referring to
environment variables.  For instance, a configuration file for a
Windows-based TeX distribution would use C<%BDBASE%> and C<%BDINPUTS%>
instead.

The value for C<sink:> is specific to an operating system.  The value
for C<find:> is specific to a TeX distribution.  C<bundle:> is where
the most opportunity for customization lies.  You can use C<bundle:>
to specify your favorite archive format.  For example, you can produce
a shar file on Unix with something like:

    bundle: (shar --archive-name="$BDBASE" $BDINPUTS > $BDBASE.sh)

or a CAB file on Microsoft Windows with something like:

    bundle: cabarc -r -p N %BDBASE%.cab %BDINPUTS%


=head1 EXAMPLES

Assume that F<myfile.dep> was produced from F<myfile.tex> by following
the instructions in L<the Description section|/"DESCRIPTION">.  The
following command produces a F<.zip> file with the MikTeX TeX
distribution running on Microsoft Windows:

    bundledoc --config=miktex.cfg myfile.dep

(In practice, it's probably necessary to specify to C<--config> the
complete path to B<bundledoc>'s F<miktex.cfg> configuration file.)

The following builds a F<.tar.gz> archive with the TeX Live
distribution running on a Unix-like operating system.  B<bundledoc>
will produce verbose output describing its operations.  All files not
in the same directory tree as F<myfile.tex> and all files containing
".fd" or ".sty" in their names are omitted.  However, all F<.bib>
files in the current directory will be included in the archive even
though none of them are referenced by F<myfile.dep>.  Finally, no
F<MANIFEST> file will be produced.

    bundledoc --config=texlive-unix.cfg --verbose --localonly \
      --exclude=.fd --exclude=.cfg --include="*.bib" --manifest="" \
      myfile.dep


=head1 FILES

The user must have previously installed F<snapshot.sty> and used it to
produce a dependency file for his document.  Besides that, the set of
external files needed by B<bundledoc> is system-specific and depends on the
configuration file used.  (See L<"CONFIGURATION FILES">, above.)

B<bundledoc> currently comes with two configuration files:

=over 4

=item F<texlive-unix.cfg>

Configuration file for TeX Live installations on Unix or Linux.  TeX
Live is a kpathsea-based TeX distribution that runs on various flavors
of Unix and Microsoft Windows.  F<texlive-unix.cfg> assumes you have
B<gzip> and uses it to produce a F<.tar.gz> archive file.  The
configuration file has B<bundledoc> use B<kpsewhich> to find LaTeX
files.

=item F<miktex.cfg>

Configuration file for MikTeX installations.  MikTeX is a popular TeX
distribution for Microsoft Windows.  F<miktex.cfg> assumes you have
B<zip> and uses it to produce a F<.zip> archive file.  The
configuration file now has B<bundledoc> use B<kpsewhich> to find LaTeX
files; older version of MikTeX required the rather nonstandard
B<initexmf> for this purpose.

=item F<texlive-unix-arlatex.cfg>

This is a variant of F<texlive-unix.cfg> that uses B<arlatex> instead
of B<gzip> to archive files.  B<arlatex> is a script included in the
B<bundledoc> distribution that generates a self-extracting F<.tex>
file based on LaTeX's C<filecontents> environment.

=back


=head1 NOTES

=head2 Including and excluding files

The C<--localonly>, C<--exclude>, and C<--include> options provide
control over the archive's contents.  C<--exclude> and C<--include>
can be specified repeatedly on the command line.  The order in which
these options are specified is immaterial; B<bundledoc> processes file
inclusions and exclusions in the following order:

=over 4

=item 1.

All files referenced by the F<.dep> file are added to the list of
files to archive.

=item 2.

If C<--localonly> is specified, all files not found in the F<.tex>
file's directory are removed from the list.

=item 3.

For each C<--exclude> string specified, all files containing that
string are removed from the list.

=item 4.

For each C<--include> file specification, the set of files designated
by its expansion are added to the list.

=back


=head2 Issues When Running Under Microsoft Windows

First, because B<bundledoc> is a Perl script, you should do one of the
following to run it under Windows:

=over 4

=item *

C<perl bundledoc>

=item *

Rename F<bundledoc> to F<bundledoc.pl> and run C<bundledoc.pl>.  (This
is assuming you have a file association set up for F<.pl>.)

=item *

Run the B<pl2bat> script (if you have it) to convert F<bundledoc> to
F<bundledoc.bat>, then run C<bundledoc>.

=back

Second, Windows uses a multi-rooted filesystem (i.e., multiple drive
letters).  I wouldn't be surprised if bad things were to happen if the
files to be bundled are scattered across drives.  In addition, Windows
supports ``UNC'' filenames, which have no drive letter at all, just a
machine and share name.  UNC filenames are also untested waters for
B<bundledoc>.  Be careful!


=head2 Testing Status

I have tested B<bundledoc> only with Perl v5.6.0 and later and only on
the following platforms:

=over 4

=item *

Linux + TeX Live

=item *

Linux + teTeX

=item *

Windows NT + MiKTeX

=item *

Solaris + ??? (something kpathsea-based)

=back

It is my hope that B<bundledoc> works on many more platforms than
those.  I tried to make the program itself fairly independent of the
operating system; only the configuration files should have to change
to run B<bundledoc> on a different system.

=head2 Future Work

I'd like B<bundledoc> to work on as wide a variety of TeX
distributions as possible.  If your platform is significantly
different from the ones listed in L<"Testing Status"> (e.g., if you're
running Z<OS X>) and you need to create a substantially different
configuration file from F<texlive-unix.cfg> and F<miktex.cfg>, please
send it to me at the address listed in L<"AUTHOR"> so I can include it
in a future version of B<bundledoc>.  (I make no promises, though).

Once B<bundledoc> works on all the major operating systems and TeX
distributions it would be really convenient if I could get
B<bundledoc> to detect the platform it's running on and automatically
select an appropriate configuration file.

Finally, it would be handy for B<bundledoc> to include fonts in the
archive file.  At a minimum, it should include F<.tfm> files, but it
would be even better if it included F<.mf>, F<.pfb>, F<.ttf>, and
other common font formats, as well.

=head2 Acknowledgments

Thanks to Fabien Vignes-Tourneret for suggesting what became the
C<--localonly> option and for a discussion that led to the
C<--exclude> and C<--include> options; and to Marius Kleiner for
updating B<bundledoc> to properly handle document subdirectories.


=head1 SEE ALSO

arlatex(1), gzip(1), kpsewhich(1), latex(1), perl(1), zip(1),
the B<snapshot> documentation


=head1 AUTHOR

Scott Pakin, I<scott+bdoc@pakin.org>